https://www.polytechnique-insights.com/en/columns/science/loudspeakers-new-materials-in-acoustics/ * FR * EN [logo-1] Polytechnique insights A REVIEW BY INSTITUT POLYTECHNIQUE DE PARIS * Columns * Braincamps [ic-exit] * FR * EN # Sign up for the newsletter Subscribe to our weekly newsletter [ ] [ ] I have read and accepted the privacy policy. [Sign up] [ic-mobile-] [loupe] * p Planet * p Energy * p Health and biotech * p Digital * p Space * p Economics * p Industry * p Science and technology * p Society * p Geopolitics * p Videos [ic-arrow-l] [ic-arrow-r] [logo-white] Polytechnique insights A REVIEW BY INSTITUT POLYTECHNIQUE DE PARIS [ ] [] [ic-cross-w] Share twitter linkedin facebook [white-link] Copie ! # Subscribe to our weekly newsletter # Newsletter Subscribe to our weekly newsletter [ ] Valider [ ] I have read and accepted the privacy policy. [Sign up] [ic-share-a] [ic-mobile-] Home / Chroniques / Loudspeakers: new materials in acoustics [adobestock] On the same topic: * Invisibility is just around the corner * CRISPR gene editing: revolution or evolution? * States and businesses: the race for quantum computers p Science and technology Loudspeakers: new materials in acoustics On May 10th, 2023 [ic-eye] [ic-eye] 3 min reading time ROUBY_Corinne Corinne Rouby teacher-researcher in mechanics at ENSTA (IP Paris) DOARE_Olivier Olivier Doare Professor in fluid mechanics at ENSTA (IP Paris) Key takeaways * Current loudspeakers use a magnet coupled with the movement of a copper coil to vibrate a membrane. * In the future these heavy, bulky, and expensive components could be replaced by a dielectric elastomer membrane. * This membrane would make it possible to lighten the object and meet three essential criteria: efficiency, spectral balance, and linearity. * Several constraints still prevent the generalisation of this new method, such as the fragility of the membrane. * Once these obstacles have been overcome, this type of loudspeaker, which is less expensive and lighter, could be industrialised on a large scale. Today there are many models of loudspeakers, produced in different sizes. These models generally use the classic method introduced by Werner von Siemens, founder of Siemens, in the 19^ th Century. This method consists of coupling a magnet with the movement of a copper coil to vibrate a cone-shaped membrane. These first two elements are already heavy, space-consuming, and expensive to produce. But they could well be replaced, in addition to the cone-shaped membrane, by a simple dielectric elastomer membrane, and some scientific magic. Elastomer, more commonly known as rubber, is an extremely flexible material. Its dielectric properties means that this new membrane conducts very little electrical current. By adding a conductive grease (forming an electrode) to each side of the membrane, a transmitted electrical signal will cause the flexible material to react, causing the vibrations necessary to send sound waves. [enschema1]Diagram of the operation of a loudspeaker using a dielectric elastomer membrane^1. This method could make it possible to create a new generation of loudspeakers. Corinne Rouby, a lecturer in mechanics at ENSTA Paris (IP Paris), co-directed Emil Garnell's thesis with Olivier Doare, a professor in mechanics, aimed at optimising this new technique^2^3. Improving the materials used "To produce a perfect loudspeaker, three criteria must be met: efficiency, spectral balance, and linearity," explains Olivier Doare. The aim is to emit as much acoustic energy as possible with as little electrical energy as possible (efficiency). It is also necessary to reproduce the transmitted electrical signal as faithfully as possible in the form of an acoustic wave (spectral balance). And this is true regardless of the desired sound power (linearity). To produce a perfect loudspeaker, three criteria must be respected: efficiency, spectral balance, and linearity. [green-twit] [green-link] [green-face] [green-link] Copie ! Especially since the role of loudspeakers is not necessarily to emit the loudest sound, but rather to remain faithful to the sound it reflects. The choice of a dielectric elastomer membrane could not only lighten the object, but also produce a sound that is just as correct, if a few conditions are met. All this, through a much less expensive production. "Research interest in dielectric elastomers has been growing since the 2000s^4," states Corinne Rouby. "But the applications were not directly linked to loudspeakers." However, the characteristics of this type of material quickly placed it in the acoustic domain. "Conventional loudspeakers are heavy and quite expensive to produce. This is due to the use of magnets, which are not necessary," she says. The idea of the dielectric elastomer membrane could therefore replace both the coil and the magnet. Lighter in weight, this new design looks promising for the loudspeaker industry, but is still in an experimental phase. "This thesis, although completed, is still intended to enrich the research," explains the researcher. The next step is in the hands of a post-doctoral chemist whose objective is to improve the coupling between the various materials. Constraints to overcome This type of loudspeaker is still only at the experimental stage, and its industrialisation will not be for tomorrow. The results are promising enough to merit further investigation, but they do reveal several constraints that still need to be overcome. "First, the elastomer membrane is flexible, but also very fragile. Too much voltage can cause an electric arc and make the membrane unusable," explains Corinne Rouby. This is particularly true for low frequencies, which require a lot of energy to transmit, and which lead to greater movements that make the membrane more fragile. For this new type of loudspeaker, the researchers worked on the shape to be given to the electrodes (through the conductive grease), to produce any type of frequency. "Each mode of vibration can cause resonances in the object," explains the researcher. It is therefore necessary to control them so that the speaker does not favour certain frequencies^5. Frequency balance can also be achieved by filtering the electrical signal sent to the loudspeaker^6. [video_haut] A major constraint was also identified: "in the laboratory, our loudspeaker was accompanied by a pressure controller that made it possible to manage the various leaks within the cavity. To imagine such a mechanism in a living room is not yet possible," she concedes. Although this hermetic problem is real, it is a technical constraint that Corinne Rouby does not consider insurmountable. Once these obstacles have been overcome, this type of loudspeaker can be massively industrialised. Less expensive and lighter, its applications can be dreamed of. Olivier Doare, co-director of this thesis, is currently working on a similar system for headphones. By using membranes, this time piezoelectric, this scientific advance could soon be in our ears. Pablo Andres 1E. Garnell, Dielectric elastomer loudspeakers : models, experiments and optimization, Doctoral dissertation, Institut Polytechnique de Paris / Unite de Mecanique de l'ENSTA Paris, 2020.| 2E. Garnell, C. Rouby and O. Doare, Dynamics and sound radiation of a dielectric elastomer membrane, Journal of Sound and Vibration, 459, 114836, 2019.| 3E. Garnell, O. Doare and C. Rouby, Coupled vibro-acoustic modeling of a dielectric elastomer loudspeaker, The Journal of the Acoustical Society of America, 147(3), 1812-1821, 2020.| 4R. Pelrine, R. Kornbluh, Q. Pei and J. Joseph, High-Speed Electrically Actuated Elastomers with Strain Greater Than 100%, Science, 287(5454), 836-839, 2000| 5E. Garnell, B. Aksoy, C. Rouby, H. Shea and O. Doare, Geometric optimization of dielectric elastomer electrodes for dynamic applications, Applied Acoustics, 181, 108120, 2021.| 6E. Garnell, O. Doare and C. Rouby, Model-Based Adaptive Filtering of Dielectric Elastomer Loudspeakers, Journal of the Audio Engineering Society, 69(6), 389-397, 2021.| More on this topic Precedent Suivant Daniel_BAJOLET p Energy p Science and technology How recycling solar panels will help preserve energy security in Europe Daniel Bajolet, Member of SAGSI (China) and Co-founder of ROSI On March 22nd, 2023 [ic-eye] [ic-eye] 3 min reading time Franck MULTON p Science and technology p Digital Using virtual reality to boost skills in Olympic boxers Franck Multon, Professor at Universite de Rennes2 at Institut de Recherche en Informatique et Systemes Aleatoires (IRISA) On October 4th, 2022 [ic-eye] [ic-eye] 3 min reading time Gerard Mourou p Science and technology p Energy Super-powered lasers to transform nuclear waste Gerard Mourou, Nobel prize in Physics and member of the Haut College de l'Ecole polytechnique On January 27th, 2021 [ic-eye] [ic-eye] 3 min reading time Pierre Henriquet p Science and technology Particle physics in everyday life Pierre Henriquet, Doctor in Nuclear Physics and Columnist at Polytechnique Insights On April 26th, 2022 [ic-eye] [ic-eye] 4 min reading time Lina Hadid p Space p Science and technology BepiColombo mission: next stop, Mercury! Lina Hadid, CNRS Research Fellow at the Plasma Physics Laboratory (LPP) On March 29th, 2023 [ic-eye] [ic-eye] 5 min reading time Subscribe to our weekly newsletter Subscribe to our weekly newsletter [ ] [Sign up] [ ] I have read and accepted the privacy policy. Our selection of braincamps 1_modeleMeteo p Science and technology How revolutionary AI and satellites are changing weather predictions 3 episodes 0_dronesGenerique p Science and technology p Geopolitics How drones are making their way onto the battlefield 3 episodes 0_PhysiqueJO p Science and technology p Society Olympics 2024: physicists are improving competitors' abilities 3 episodes facebook twitter linkedin instagram * About us * Sponsors * Contributors * Legal notices * Contact * Cookie Settings Logo Institut Polytechnique de Paris [ic-mobile-] Our world explained with science. Every week, in your inbox. Get the newsletter