https://rqsall.com/posts/creating-a-solaris-10-zone-on-openindiana

mirror site(secure) | man site(secure) | site map

rqsall


  * > 9/
  * > inferno/
  * >> posts/
  * 
      + >> creating a solaris 10 zone on openindiana
      + > files/
      + > using an old blackberry as a portable ssh terminal
  * > sgi/

Creating a Solaris 10 zone on OpenIndiana

2021-12-04

Illumos actually still supports creating Solaris 10 Zones. In a
Solaris 10 zone, translation is done from Solaris 10 syscalls to
Illumos' in order to allow the system to run the zone. You can
install support for Solaris 10 branded zones on OpenIndiana by
running:

sudo pkg install pkg:/system/zones/brand/s10

If you get an error, make sure your system is updated with:

sudo pkg update -v

You can download a template for the zone here.

This template is designed to be run on Solaris 11 and automatically
sets the zone up for you if you run it on that platform. There are
some differences between OpenIndiana/Illumos' userland and Solaris
11's that prevents this from working, so instead we're going to
extract the disk image manually.

To determine when the archive actually starts within the script, run:

awk '/^__IMAGE_BELOW__/ {print NR + 1; exit}' bin-filename-here

I doubt Oracle is ever going to update this script/image again, so if
you want to skip that step, for me it started at 3098 in
solaris-10u11-x86.bin. From this point forward I'm going to be
assuming it started at 3098 for you and the filename of the archive
you have is solaris-10u11-x86.bin.

You can now extract with:

tail +3098 ../solaris-10u11-x86.bin | tar xvf -

Among other things, this will net you disk-image, which we care
about. It's a gzipped cpio archive of a Solaris 10 1/13 root
filesystem. You want to extract this as OpenIndiana's zoneadm didn't
seem to want to use disk-image directly:

gzcat disk-image | sudo cpio -idm

Before creating the zone, we need a ZFS dataset. I'll be creating my
zone at /zones/sol10:

sudo zfs create -o mountpoint=/zones rpool/zones

Now, let's create the zone. Assuming the zone's name will be sol10,
the network interface it'll bind to is e1000g0, and its IP address
will be 192.168.1.18:

zonecfg -z sol10
zonecfg:sol10> create -t SUNWsolaris10
zonecfg:sol10> set zonepath=/zones/sol10
zonecfg:sol10> set autoboot=true
zonecfg:sol10> add net
zonecfg:sol10:net> set address=192.168.1.18
zonecfg:sol10:net> set physical=e1000g0
zonecfg:sol10:net> end
zonecfg:sol10> verify
zonecfg:sol10> commit
zonecfg:sol10> exit

We can now actually install the root filesystem into the zone:

sudo zoneadm -z sol10 install -u -d /full/patch/to/extracted/root

After a while, the install should complete and you'll be returned to
your shell prompt. Now, boot the zone:

sudo zoneadm -z sol10 boot

You can check that the zone's running with:

sudo zoneadm list -cv

You can login to the zone to complete initial setup with:

sudo zlogin -C sol10

Congratulations, you now have a fully functional Solaris 10 zone on
OpenIndiana. To enable connecting to the zone through XDMCP, log in
to the zone as root and run:

svcadm enable -r cde-login

Image: Connected to the zone over XDMCP


Powered by werc
Glenda with cool shades