Firmare upgrade 3.2.4 #440 (Feb 27, 2002)

This firmware update addesses the following problems:
==============================
- ICMP echoing no longer degrades network performance.

- Static IP addresses may now contain zeros in the second and third octet.
  Previously, zeros were not allowed in IP addresses.


Installing the new firmware
===========================
The new access point firmware filename is: 3SRAPFW.BIN

Upgrading the Access Point Firmware
-----------------------------------
1. In the Wireless Network Tree, click Refresh, then select the access point 
   again and click Configure.

3. Under Tools, click Upgrade System.

4. Click the Access Point Firmware radio button.

5. Click Browse, select the access point firmware upgrade file that you downloaded
   earlier (3SRAPFW.BIN), and click OK.

   If you choose the wrong file, click Clear Entries. The selected file is cleared 
   and you can browse again for a different file.

6. Click Upgrade.

   The upgrade file is copied from your computer to the access point and the 
   access point restarts using the new upgrade.