Reprinted from TidBITS by permission; reuse governed by Creative Commons license BY-NC-ND 3.0. TidBITS has offered years of thoughtful commentary on Apple and Internet topics. For free email subscriptions and access to the entire TidBITS archive, visit http://www.tidbits.com/ Getting Started with Hue Lights Josh Centers I've long been a skeptic of home automation. It seemed like a gimmick that would cause more problems than it would solve. Grafting the bugs and security exploits of computers onto my door locks, lights, and thermostat did not seem like an enticing prospect. However, with Apple's impending iOS and tvOS releases, both of which greatly enhance home automation, I decided that I couldn't ignore home automation any longer. The obvious choice for my first step was a set of Philips's highly regarded [1]Hue light bulbs. I chose them because they're useful, fun, and if worse comes to worst, they will still work as regular LED bulbs. The Hue universe can be overwhelming, so in this article I'm going to focus on setting up a starter kit with the official Hue app and touch on some of the other possibilities. What Are Hue Lights? -- Hue lights are wireless, software-controlled LED light bulbs. They come in two basic variants: the rather pricey [2]Hue White and Color Ambiance and the cheaper [3]Hue White bulbs. Philips also offers different shapes of bulb, including the standalone [4]Hue Bloom and the [5]Hue Lightstrip Plus. They're controlled by a Wi-Fi bridge that connects via Ethernet to your home network. Since the second version of the Hue Bridge, the Hue system has been compatible with [6]Apple's HomeKit, so you can control the lights with Siri. The only thing I dislike about Hue is the high startup costs. There are two choices of starter kit: a [7]$200 kit with three colored bulbs and an [8]$80 kit with two white bulbs. Additional colored bulbs are about $60, while white bulbs run about $15. If you do the math, the color kit makes a lot more sense. For $200, you get $180 worth of bulbs, making the Hue Bridge $20, while the $80 kit gives you $30 worth of bulbs, making the Hue Bridge $50. You can often find deals on the color kit (I got mine for $150), so if you're just starting out, I would highly recommend it. In fact, if you want more color bulbs later, it makes since to buy the color kit at a discount, and set the additional bridge aside for a rainy day (or maybe sell it to someone stuck with a first-generation Hue Bridge that doesn't support HomeKit). Of course, you could also buy the [9]Hue Bridge on its own, for about $60, and then buy bulbs individually, but the starter kits are a much better deal. So what can you do with Hue lights? Here are a few possibilities: * Turn your lights on or off, or dim from your iPhone, without having to get off the couch. * Turn the lights on before you enter a dark room, so you don't stumble all over the place. * Activate a colored scene to add ambiance to a room. * Sync the lights with your music to turn your living room into a dance floor, via a third-party app like [10]Light DJ. * Sync your living room lights with what's on TV so that the color of the room matches the dominant colors on the TV, with a third-party app like [11]Hue TV. You might think that all this seems gimmicky, and it can be, but I've found that the Hue lights have real value in my everyday life. For instance, if our toddler falls asleep on my wife, she can dim the lights without disturbing him. If our living room lamps are reflecting off the TV, I put them into 'Movie Mode,' which dims them and turns them a calming shade of blue. I can turn on the bedroom lamp before going to bed, and I can set it to a night mode that won't wake up my wife. But more importantly, Hue lights are fun, and they make me feel powerful. With a voice command or a tap on my iPhone's screen, I can completely change how the inside of my house looks. It makes me feel like a wizard, and isn't that what technology should do? But before you can put on your robe and wizard hat, you must first set up the Hue lights, and accomplishing that may not make you feel too powerful. Setting Up Hue -- The color starter kit contains three Hue bulbs, a Hue Bridge, an Ethernet cable, and a power adapter. [12][tn_Hue-kit.jpg] Installing the Hue bulbs is literally as simple as screwing in a lightbulb. The most difficult part is deciding where to install them. I settled on our two living room floor lamps and a bedroom lamp. Installing the Hue Bridge requires a power connection and an Ethernet connection to your router. Unfortunately, the bridge doesn't have Wi-Fi connectivity, so be sure to put it in an easily accessible spot, because you must press the big button on the Hue Bridge every time you set up an app to operate with your Hue lights. I put mine behind my TV, which is easy enough for me to access, but not so easy for our rambunctious toddler to reach; you can mount the bridge on a wall if you wish. When you install the bridge, make sure it's properly connected to the network. There are three lights on the bridge: be sure that all three are lit. I had trouble doing this, which I finally narrowed down to a faulty Ethernet cable. [13][tn_Hue-Bridge.jpg] Next, you need to obtain the [14]Philips Hue app for the iPhone. Make sure to get the second generation of the app, and not the first generation version, which is still in the App Store. Although you can set up your lights with the older app, for sanity's sake I'm going to focus on the newer version. When you open the app, it begins searching for a Hue bridge. When it finds your bridge, tap Set Up, and then tap the big button on top of the bridge. After that, follow the prompts to give the Hue app access to your Home data (needed for Siri control); you may also be prompted to update the Hue bridge's firmware. [15][tn_Hue-initial-setup.jpg] The next step sets up Siri voice control, but, as I'll explain later, what you're actually doing is setting up HomeKit, Apple's home automation framework. Follow the prompts to pair the bridge, and either create or select a 'home.' To finish pairing HomeKit with your Hue lights, you'll need to enter the 8-digit HomeKit code or scan it with your camera. There is one code on the bottom of your Hue bridge, but it's much easier to scan the one on the inside of the Hue box. [16][tn_Hue-HomeKit-setup.jpg] Finally, you're prompted to set up a room. At this point you may have a problem: figuring out which light is which because they all have generic names like 'Hue color lamp 1.' In my case, since two out of three bulbs were in my living room, I set them all up as 'Living.' This problem isn't a show-stopper ' you can fix it later. [17][tn_Hue-room-setup.jpg] Now your lights are set up ' well, sort of. Let's now explore the Hue app to finish setup. First Things in the Hue App -- The very first thing you'll want to do is rename your lights so you can tell them apart. In the app, go to Settings (the gear in the upper left) > Light Setup. To tell the lights apart, tap the listing for one and the light will flash. After you figure where that light is, tap the 'i' button to see a screen where you can give the light a descriptive name, like 'Living Room Couch Corner.' [18][tn_Rename-lights.jpg] Now that your lights are appropriately named, you set up your rooms in Settings > Room Setup so the app knows where your lights are. Tap the + button in the lower right, enter the room's name, set its room type, choose whether to add the default scenes to that room (you probably do), and then select which lights go in that room. In my setup, I've renamed 'Living' to 'Living Room,' created a 'Bedroom' room, and assigned the appropriate lights to each room. [19][tn_Room-setup.jpg] Making a Scene -- Now that we have the basics settings in, let's play with the lights! In the Rooms tab, the rooms you set up should be listed. The on/off switch for each room turns all the lights assigned to that room on and off. Tap a room to see a screen with two tabs: Lights, where you can turn individual lights on and off, and Scenes. [20][tn_Hue-light-control.jpg] What is a scene? Simply put, a scene is a light configuration. For instance, if I select the included Savannah Sunset scene, it turns all the lights in the room a shade of red, while the Arctic Aurora scene turns them a shade of blue. When you select a scene, a circular control appears with which you adjust the brightness of the lights. The photo below shows how the Savannah Sunset scene looks in my living room. [21][tn_Hue-set-scene.jpg] [22][tn_Savannah-Sunset.jpg] There are two ways to create a scene: manually or from a photo. To create a scene from a photo, go to the Scenes tab, tap the plus button and select a photo, either from Philips or your Camera Roll. Move the photo around to change the color profile, or tap Shuffle. Tap Save and enter a name for the scene when you're satisfied. You can also create scenes manually. In the Lights tab, tap a bulb's icon to manually adjust that light. You can choose from a color palette, a white palette, or from a number of task-focused 'recipes,' such as Relax, Read, and Energize. In the Lights tab, the slider under each light lets you adjust the light's brightness. Once you've adjusted all the lights to your satisfaction, tap the plus button in the lower right to save the scene. [23][tn_Make-Scenes.jpg] To delete or rename a scene, go to the scene list and tap and hold on a scene bubble. You can reshuffle colors in a scene based off a photo, but you can't edit a manually created scene. However, what you can do is set that scene, go back to the Lights tab, make the adjustments you want, and then save a new scene. Hue Automation -- The app's main screen has a Routines tab, and this is where you can set up automated actions based on time and location. I don't advise playing with these until you get a good grip on how to control the Hue lights ' otherwise, you might be baffled why all of your lights are on at 3:30 AM. Here's a brief overview of what you can automate: * Home & Away: Use this to set your lights to activate when you arrive at or leave your house. You need a free [24]My Hue account to use this feature. * Wake Up: This feature automatically turns your lights on at a set time. This is useful if you have trouble getting up in the morning. * Go to Sleep: This turns your lights off at a set time ' useful for kids who stubbornly refuse to go to sleep! * My Routines: Here you can create custom routines, such as setting scenes to activate at a specific time. Creating Widgets -- When you're actually using your lights and not merely playing around, you probably don't want to dig around in the Hue app. This is where the app's Notification Center widgets are essential, giving you quick access to your favorite scenes even when your iPhone is locked. These widgets are also transferred to the Apple Watch app, if you have one of those, making access to your lights even easier (assuming you can get the Watch app to work). [25][tn_Hue-widgets.jpg] To set up the widgets, go to Settings > Widgets & Apple Watch in the Hue app. If you already have widgets, they are listed there, and you can tap one to edit it. To create a new widget, tap the plus button in the lower right. Start by entering a name for the widget. I recommend keeping the name short, so that it has room to be displayed in Notification Center. I use a short name or abbreviation for the room name, followed by a descriptor, like 'L. Bright' to brighten up the living room. [26][tn_Making-Hue-widget.jpg] Next, choose an icon. This isn't terrible important, because this icon won't be used in Notification Center. Instead, the icon of the scene is used. Choose which rooms the widget controls. You can choose the entire home, multiple rooms, or just a single room. Finally, choose a scene. I recommend making the following widgets for each room: * Bright: The default, full brightness scene. * Dimmed: A scene for when you want to chill out a bit and get ready for bed. * Nightlight: Handy for keeping a bit of light on in a room without disturbing anyone. * Off: You want to be able to turn your lights off, right? Widgets are my favorite way to control the Hue lights, because they're easy to access and generally reliable. However, Siri can also be used to control your lights, and it's a much better party trick'¦ Activating Siri and Introducing HomeKit -- You can configure lights, scenes, and entire rooms to work with Siri in the Hue app under Settings > Siri Voice Control. Configuring a light, scene, or room to work with Siri is as easy as tapping a checkbox. There is a catch, though: every scene linked to Siri must have a unique name. This is a problem if you want to use Siri to activate the Bright scene in both your living room and bedroom. Another thing to consider is how easily Siri will recognize a scene's name. The trick I use is to give scenes unique names like 'Bedroom Bright' and 'Living Room Dim, which solves both problems. For whatever reason, Siri has a hard time understanding when I say 'Bright Living Room,' but has no problem understanding 'Living Room Bright.' Go figure. [27][tn_Hue-Siri-setup.jpg] Once you have Siri set up with your Hue lights, here are some of the commands you can use: * 'Turn on all the lights.' * 'Dim the living room lights.' * 'Turn the bedroom blue.' * 'Set living room brightness to 70 percent.' Of course, you can also activate scenes with Siri. If the scene name is easy for Siri to recognize, you can just speak it, for instance, 'Savannah Sunset.' However, if Siri has difficulty understanding a scene name, the more reliable method of activating a scene is to say, 'Set scene Savannah Sunset.' When you activate a Hue command with Siri, what you're actually doing is registering that command with HomeKit, Apple's built-in API for controlling compatible home automation devices. In plain English, HomeKit links together all of your compatible home automation gizmos, letting you control them with Siri or a HomeKit control app. In iOS 10, Apple is introducing the built-in Home app, which will be able to configure and control all of your HomeKit devices. As a bonus, you'll also be able to work them from Control Center. Numbered badges in the Siri Voice Control list indicate Hue commands that are out of sync with HomeKit. I see these in my Hue app because, instead of the official Hue app, I use an app that controls HomeKit directly, bypassing Hue's own system. However, making use of HomeKit is a whole other topic entirely. If you've enjoyed this overview of the Philips Hue and want us to write more about home automation, let us know in the comments. References 1. http://www2.meethue.com/ 2. http://www.amazon.com/dp/B014H2OZJS/?tag=tidbitselectro00 3. http://www.amazon.com/dp/B01C5C9ZLK/?tag=tidbitselectro00 4. http://www.amazon.com/dp/B00I12YFP0/?tag=tidbitselectro00 5. http://www.amazon.com/dp/B014H2OXYU/?tag=tidbitselectro00 6. http://www.apple.com/ios/homekit/ 7. http://www.amazon.com/dp/B016H0QSGG/?tag=tidbitselectro00 8. http://www.amazon.com/dp/B014H2OZAC/?tag=tidbitselectro00 9. http://www.amazon.com/dp/B014H2P42K/?tag=tidbitselectro00 10. http://lightdjapp.com/ 11. https://itunes.apple.com/us/app/hue-tv/id1006388597?mt=8&at=10l5PW 12. http://tidbits.com/resources/2016-07/Hue-kit.png 13. http://tidbits.com/resources/2016-07/Hue-Bridge.png 14. https://itunes.apple.com/us/app/philips-hue/id1055281310?mt=8&at=10l5PW 15. http://tidbits.com/resources/2016-07/Hue-initial-setup.png 16. http://tidbits.com/resources/2016-07/Hue-HomeKit-setup.png 17. http://tidbits.com/resources/2016-07/Hue-room-setup.png 18. http://tidbits.com/resources/2016-07/Rename-lights.png 19. http://tidbits.com/resources/2016-07/Room-setup.png 20. http://tidbits.com/resources/2016-07/Hue-light-control.png 21. http://tidbits.com/resources/2016-07/Hue-set-scene.png 22. http://tidbits.com/resources/2016-07/Savannah-Sunset.png 23. http://tidbits.com/resources/2016-07/Make-Scenes.png 24. https://my.meethue.com/en-us 25. http://tidbits.com/resources/2016-07/Hue-widgets.png 26. http://tidbits.com/resources/2016-07/Making-Hue-widget.png 27. http://tidbits.com/resources/2016-07/Hue-Siri-setup.png .