PSPRNT.LIT v1.1 Copyright 1992 Stoner & Wilson Consulting Software Engineers Problem: When you create a postscript file on a PC using any one of several packages (Word Perfect for example) and then attempt to print it on the Alpha Micro under the LASWRT driver it doesn't print. This is true regardless of how the file is sent to the Alpha. Cause: Many of the postscript generating packages precede the body of the document with a ^D to assure any previous document sent has been terminated. The problem is the LASWRT sees the ^D and assumes the end of the current document. Additionally, some packages, i.e. Auto Map, do not bother with any postscript lead-in but instead start with comment and then proceed directly to the postscript commands. Also LASWRT requires a ^D to be at the end of the file. Solution: With the exception of one new switch to indicate spooler type, PSPRNT works identically to the PRINT/PRNT commands. That is to say you can use the same switches you would use with either print command. The primary differences occur behind the scenes. PSPRNT tests the beginning of the document for a ^D. If present, it will be filtered out. A ^D is then appended to the end of the document. After processing, the document, complete with all switches, will be submitted to the print spooler. For example, PSPRNT/NOFF/D MYDOC.LST will be sumitted as PRINT/NOFF/D MYDOC.LST. I did mention one new switch. It is to indicate the spooling command to be used. None or /L = PRINT /T = PRNT If you are using the Alpha as a print server via AlphaLan, you can use PSPRNT as the print command by executing (one time setup) SELPRT. Substitue PSPRNT for the appropriate print command. Conclusion: It appears to work in all cases. The appended ^D has no effect on a normal ASCII file. Problems should be reported quickly. We will attempt to rectify any that occur. Distribution: Anyone may freely distribute this document and the associated software as needed. The only requirement being the maintenance of all copyright notices. Any problems encountered should be reported via AMUS. .