# Standard antiX .conkyrc file
# For conky editing help and commands visit = Casey's Conky Reference with Examples {http://www.ifxgroup.net/conky.htm}
 
# set to yes if you want Conky to be forked in the background
background yes
 
short_units yes
 
cpu_avg_samples 1
net_avg_samples 1
 
out_to_console no
 
# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
font 8x12
#font 7x12
 
# Use Xft?
use_xft yes
 
# Xft font when Xft is enabled
#xftfont gentium:size=12
#ftfont DejaVu Sans:size=10
xftfont DejaVu Sans:bold:size=9
#xftfont DejaVu Sans:size=9
 
# Create own window instead of using desktop (required in nautilus, pcmanfm and rox desktops)
own_window yes
own_window_class Conky
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar
own_window_type override
 
# Text alpha when using Xft
xftalpha 1.0
 
#on_bottom no
 
# Update interval in seconds
update_interval 1
 
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
 
# Minimum size of text area
minimum_size 55
maximum_width 190
 
# Draw shades?
draw_shades no
 
# Draw outlines?
draw_outline no
 
# Draw borders around text
draw_borders no
 
# Stippled borders?
stippled_borders 0
 
# border margins
#border_margin 10
 
# border width
border_width 2
 
# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
 
#color ffffff
color4 yellow
color8 77ccff
color9 5599cc
 
# Text alignment, other possible values are commented
# alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
 
# Gap between borders of screen and text
 
gap_x 20
gap_y 40
 
# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer right
 
# Subtract file system buffers from used memory?
no_buffers yes
 
# if_up_strictness link:  up | link | address
if_up_strictness address
 
# set to yes if you want all text to be in uppercase
uppercase no
 
TEXT
${alignc}$nodename
${alignc}${color8}${font DejaVu Sans:size=12}${time %H:%M} ${font} ${color}
${alignc}${time %a %d %b}
${alignc}Uptime: $uptime
#${alignc}${exec disp=${DISPLAY#:}; disp=${disp%.[0-9]}; cat $HOME/.desktop-session/desktop-code.$disp 2>/dev/null}
#res:${alignr}${execi 60 xdpyinfo | sed -n -r "s/^\s*dimensions:.*\s([0-9]+x[0-9]+).*/\1/p"}
#dpi:${alignr}${execi 60 sed -nr "s/^\s*Xft.dpi:\s*([0-9]+(x[0-9]+)?).*/\1/p" $HOME/.Xresources | grep "[0-9]" || echo 96}
#Automount: ${alignr}${execi 60 grep -q "^automount=TRUE" $HOME/.desktop-session/automount.conf 2>/dev/null && echo "enabled" || echo "disabled"}
Freq:${alignr}${freq}
CPU:${alignr}${cpu}%
#${color}Init:${alignr}${color3}${execi 60 detect-init.sh}
${alignr}${cpugraph cpu0 30,170 5599cc 5599cc}
Disk:${alignr}${diskio}
${alignr}${diskiograph 30,170 5599cc 5599cc}${if_up eth0}
eth0 up: $alignr ${upspeed eth0}
${alignr}${upspeedgraph   eth0 30,170 5599cc 5599cc}
eth0 down: $alignr ${downspeed eth0}
${alignr}${downspeedgraph eth0 30,170  5599cc 5599cc}${endif}${if_up eth1}
eth1 up: $alignr ${upspeed eth1}
${alignr}${upspeedgraph   eth1 30,170 5599cc 5599cc}
eth1 down: $alignr ${downspeed eth1}
${alignr}${downspeedgraph eth1 30,170  5599cc 5599cc}${endif}${if_up wlan0}
 
Wireless 
IP  $alignr ${addr wlan0}
Gate $alignr  $gw_ip
NS $alignr $nameserver
 
wlan0 up: $alignr ${upspeed wlan0}
${alignr}${upspeedgraph   wlan0 30,170 5599cc 5599cc}
wlan0 down: $alignr ${downspeed wlan0}
${alignr}${downspeedgraph wlan0 30,170 5599cc 5599cc}${endif}${if_up wlan1}
wlan1 up: $alignr ${upspeed wlan1}
${alignr} ${upspeedgraph   wlan1 30,170 5599cc 5599cc}
wlan1 down: $alignr ${downspeed wlan1}
${alignr}${downspeedgraph wlan1 30,170 5599cc 5599cc}${endif}
${alignr}${color8}Used / Total ${color}
RAM:${alignr}$mem / $memmax
Swap:${alignr}$swap / $swapmax
/ Disk:${alignr}${fs_used /} / ${fs_size /}
#${alignc}${execi 1000 persist-enabled}
 
${font DejaVu Sans Mono:size=10}${execi 30 ~/bin/ruptime.sh}