LAPACK  3.4.2
LAPACK: Linear Algebra PACKage
 All Files Functions Groups
Functions/Subroutines
complex16
Level3
Collaboration diagram for complex16:

Functions/Subroutines

subroutine zgemm (TRANSA, TRANSB, M, N, K, ALPHA, A, LDA, B, LDB, BETA, C, LDC)
 ZGEMM
subroutine zhemm (SIDE, UPLO, M, N, ALPHA, A, LDA, B, LDB, BETA, C, LDC)
 ZHEMM
subroutine zher2k (UPLO, TRANS, N, K, ALPHA, A, LDA, B, LDB, BETA, C, LDC)
 ZHER2K
subroutine zherk (UPLO, TRANS, N, K, ALPHA, A, LDA, BETA, C, LDC)
 ZHERK
subroutine zsymm (SIDE, UPLO, M, N, ALPHA, A, LDA, B, LDB, BETA, C, LDC)
 ZSYMM
subroutine zsyr2k (UPLO, TRANS, N, K, ALPHA, A, LDA, B, LDB, BETA, C, LDC)
 ZSYR2K
subroutine zsyrk (UPLO, TRANS, N, K, ALPHA, A, LDA, BETA, C, LDC)
 ZSYRK
subroutine ztrmm (SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA, B, LDB)
 ZTRMM
subroutine ztrsm (SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA, B, LDB)
 ZTRSM

Detailed Description

This is the group of complex16 LEVEL 3 BLAS routines.

Function/Subroutine Documentation

subroutine zgemm ( character  TRANSA,
character  TRANSB,
integer  M,
integer  N,
integer  K,
complex*16  ALPHA,
complex*16, dimension(lda,*)  A,
integer  LDA,
complex*16, dimension(ldb,*)  B,
integer  LDB,
complex*16  BETA,
complex*16, dimension(ldc,*)  C,
integer  LDC 
)

ZGEMM

Purpose: 
 ZGEMM  performs one of the matrix-matrix operations

    C := alpha*op( A )*op( B ) + beta*C,

 where  op( X ) is one of

    op( X ) = X   or   op( X ) = X**T   or   op( X ) = X**H,

 alpha and beta are scalars, and A, B and C are matrices, with op( A )
 an m by k matrix,  op( B )  a  k by n matrix and  C an m by n matrix.
Parameters:
[in]TRANSA
          TRANSA is CHARACTER*1
           On entry, TRANSA specifies the form of op( A ) to be used in
           the matrix multiplication as follows:

              TRANSA = 'N' or 'n',  op( A ) = A.

              TRANSA = 'T' or 't',  op( A ) = A**T.

              TRANSA = 'C' or 'c',  op( A ) = A**H.
[in]TRANSB
          TRANSB is CHARACTER*1
           On entry, TRANSB specifies the form of op( B ) to be used in
           the matrix multiplication as follows:

              TRANSB = 'N' or 'n',  op( B ) = B.

              TRANSB = 'T' or 't',  op( B ) = B**T.

              TRANSB = 'C' or 'c',  op( B ) = B**H.
[in]M
          M is INTEGER
           On entry,  M  specifies  the number  of rows  of the  matrix
           op( A )  and of the  matrix  C.  M  must  be at least  zero.
[in]N
          N is INTEGER
           On entry,  N  specifies the number  of columns of the matrix
           op( B ) and the number of columns of the matrix C. N must be
           at least zero.
[in]K
          K is INTEGER
           On entry,  K  specifies  the number of columns of the matrix
           op( A ) and the number of rows of the matrix op( B ). K must
           be at least  zero.
[in]ALPHA
          ALPHA is COMPLEX*16
           On entry, ALPHA specifies the scalar alpha.
[in]A
          A is COMPLEX*16 array of DIMENSION ( LDA, ka ), where ka is
           k  when  TRANSA = 'N' or 'n',  and is  m  otherwise.
           Before entry with  TRANSA = 'N' or 'n',  the leading  m by k
           part of the array  A  must contain the matrix  A,  otherwise
           the leading  k by m  part of the array  A  must contain  the
           matrix A.
[in]LDA
          LDA is INTEGER
           On entry, LDA specifies the first dimension of A as declared
           in the calling (sub) program. When  TRANSA = 'N' or 'n' then
           LDA must be at least  max( 1, m ), otherwise  LDA must be at
           least  max( 1, k ).
[in]B
          B is COMPLEX*16 array of DIMENSION ( LDB, kb ), where kb is
           n  when  TRANSB = 'N' or 'n',  and is  k  otherwise.
           Before entry with  TRANSB = 'N' or 'n',  the leading  k by n
           part of the array  B  must contain the matrix  B,  otherwise
           the leading  n by k  part of the array  B  must contain  the
           matrix B.
[in]LDB
          LDB is INTEGER
           On entry, LDB specifies the first dimension of B as declared
           in the calling (sub) program. When  TRANSB = 'N' or 'n' then
           LDB must be at least  max( 1, k ), otherwise  LDB must be at
           least  max( 1, n ).
[in]BETA
          BETA is COMPLEX*16
           On entry,  BETA  specifies the scalar  beta.  When  BETA  is
           supplied as zero then C need not be set on input.
[in,out]C
          C is COMPLEX*16 array of DIMENSION ( LDC, n ).
           Before entry, the leading  m by n  part of the array  C must
           contain the matrix  C,  except when  beta  is zero, in which
           case C need not be set on entry.
           On exit, the array  C  is overwritten by the  m by n  matrix
           ( alpha*op( A )*op( B ) + beta*C ).
[in]LDC
          LDC is INTEGER
           On entry, LDC specifies the first dimension of C as declared
           in  the  calling  (sub)  program.   LDC  must  be  at  least
           max( 1, m ).
Author:
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
November 2011
Further Details: 
  Level 3 Blas routine.

  -- Written on 8-February-1989.
     Jack Dongarra, Argonne National Laboratory.
     Iain Duff, AERE Harwell.
     Jeremy Du Croz, Numerical Algorithms Group Ltd.
     Sven Hammarling, Numerical Algorithms Group Ltd.

Definition at line 188 of file zgemm.f.

Here is the call graph for this function:

subroutine zhemm ( character  SIDE,
character  UPLO,
integer  M,
integer  N,
complex*16  ALPHA,
complex*16, dimension(lda,*)  A,
integer  LDA,
complex*16, dimension(ldb,*)  B,
integer  LDB,
complex*16  BETA,
complex*16, dimension(ldc,*)  C,
integer  LDC 
)

ZHEMM

Purpose: 
 ZHEMM  performs one of the matrix-matrix operations

    C := alpha*A*B + beta*C,

 or

    C := alpha*B*A + beta*C,

 where alpha and beta are scalars, A is an hermitian matrix and  B and
 C are m by n matrices.
Parameters:
[in]SIDE
          SIDE is CHARACTER*1
           On entry,  SIDE  specifies whether  the  hermitian matrix  A
           appears on the  left or right  in the  operation as follows:

              SIDE = 'L' or 'l'   C := alpha*A*B + beta*C,

              SIDE = 'R' or 'r'   C := alpha*B*A + beta*C,
[in]UPLO
          UPLO is CHARACTER*1
           On  entry,   UPLO  specifies  whether  the  upper  or  lower
           triangular  part  of  the  hermitian  matrix   A  is  to  be
           referenced as follows:

              UPLO = 'U' or 'u'   Only the upper triangular part of the
                                  hermitian matrix is to be referenced.

              UPLO = 'L' or 'l'   Only the lower triangular part of the
                                  hermitian matrix is to be referenced.
[in]M
          M is INTEGER
           On entry,  M  specifies the number of rows of the matrix  C.
           M  must be at least zero.
[in]N
          N is INTEGER
           On entry, N specifies the number of columns of the matrix C.
           N  must be at least zero.
[in]ALPHA
          ALPHA is COMPLEX*16
           On entry, ALPHA specifies the scalar alpha.
[in]A
          A is COMPLEX*16 array of DIMENSION ( LDA, ka ), where ka is
           m  when  SIDE = 'L' or 'l'  and is n  otherwise.
           Before entry  with  SIDE = 'L' or 'l',  the  m by m  part of
           the array  A  must contain the  hermitian matrix,  such that
           when  UPLO = 'U' or 'u', the leading m by m upper triangular
           part of the array  A  must contain the upper triangular part
           of the  hermitian matrix and the  strictly  lower triangular
           part of  A  is not referenced,  and when  UPLO = 'L' or 'l',
           the leading  m by m  lower triangular part  of the  array  A
           must  contain  the  lower triangular part  of the  hermitian
           matrix and the  strictly upper triangular part of  A  is not
           referenced.
           Before entry  with  SIDE = 'R' or 'r',  the  n by n  part of
           the array  A  must contain the  hermitian matrix,  such that
           when  UPLO = 'U' or 'u', the leading n by n upper triangular
           part of the array  A  must contain the upper triangular part
           of the  hermitian matrix and the  strictly  lower triangular
           part of  A  is not referenced,  and when  UPLO = 'L' or 'l',
           the leading  n by n  lower triangular part  of the  array  A
           must  contain  the  lower triangular part  of the  hermitian
           matrix and the  strictly upper triangular part of  A  is not
           referenced.
           Note that the imaginary parts  of the diagonal elements need
           not be set, they are assumed to be zero.
[in]LDA
          LDA is INTEGER
           On entry, LDA specifies the first dimension of A as declared
           in the  calling (sub) program. When  SIDE = 'L' or 'l'  then
           LDA must be at least  max( 1, m ), otherwise  LDA must be at
           least max( 1, n ).
[in]B
          B is COMPLEX*16 array of DIMENSION ( LDB, n ).
           Before entry, the leading  m by n part of the array  B  must
           contain the matrix B.
[in]LDB
          LDB is INTEGER
           On entry, LDB specifies the first dimension of B as declared
           in  the  calling  (sub)  program.   LDB  must  be  at  least
           max( 1, m ).
[in]BETA
          BETA is COMPLEX*16
           On entry,  BETA  specifies the scalar  beta.  When  BETA  is
           supplied as zero then C need not be set on input.
[in,out]C
          C is COMPLEX*16 array of DIMENSION ( LDC, n ).
           Before entry, the leading  m by n  part of the array  C must
           contain the matrix  C,  except when  beta  is zero, in which
           case C need not be set on entry.
           On exit, the array  C  is overwritten by the  m by n updated
           matrix.
[in]LDC
          LDC is INTEGER
           On entry, LDC specifies the first dimension of C as declared
           in  the  calling  (sub)  program.   LDC  must  be  at  least
           max( 1, m ).
Author:
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
November 2011
Further Details: 
  Level 3 Blas routine.

  -- Written on 8-February-1989.
     Jack Dongarra, Argonne National Laboratory.
     Iain Duff, AERE Harwell.
     Jeremy Du Croz, Numerical Algorithms Group Ltd.
     Sven Hammarling, Numerical Algorithms Group Ltd.

Definition at line 192 of file zhemm.f.

Here is the call graph for this function:

Here is the caller graph for this function:

subroutine zher2k ( character  UPLO,
character  TRANS,
integer  N,
integer  K,
complex*16  ALPHA,
complex*16, dimension(lda,*)  A,
integer  LDA,
complex*16, dimension(ldb,*)  B,
integer  LDB,
double precision  BETA,
complex*16, dimension(ldc,*)  C,
integer  LDC 
)

ZHER2K

Purpose: 
 ZHER2K  performs one of the hermitian rank 2k operations

    C := alpha*A*B**H + conjg( alpha )*B*A**H + beta*C,

 or

    C := alpha*A**H*B + conjg( alpha )*B**H*A + beta*C,

 where  alpha and beta  are scalars with  beta  real,  C is an  n by n
 hermitian matrix and  A and B  are  n by k matrices in the first case
 and  k by n  matrices in the second case.
Parameters:
[in]UPLO
          UPLO is CHARACTER*1
           On  entry,   UPLO  specifies  whether  the  upper  or  lower
           triangular  part  of the  array  C  is to be  referenced  as
           follows:

              UPLO = 'U' or 'u'   Only the  upper triangular part of  C
                                  is to be referenced.

              UPLO = 'L' or 'l'   Only the  lower triangular part of  C
                                  is to be referenced.
[in]TRANS
          TRANS is CHARACTER*1
           On entry,  TRANS  specifies the operation to be performed as
           follows:

              TRANS = 'N' or 'n'    C := alpha*A*B**H          +
                                         conjg( alpha )*B*A**H +
                                         beta*C.

              TRANS = 'C' or 'c'    C := alpha*A**H*B          +
                                         conjg( alpha )*B**H*A +
                                         beta*C.
[in]N
          N is INTEGER
           On entry,  N specifies the order of the matrix C.  N must be
           at least zero.
[in]K
          K is INTEGER
           On entry with  TRANS = 'N' or 'n',  K  specifies  the number
           of  columns  of the  matrices  A and B,  and on  entry  with
           TRANS = 'C' or 'c',  K  specifies  the number of rows of the
           matrices  A and B.  K must be at least zero.
[in]ALPHA
          ALPHA is COMPLEX*16 .
           On entry, ALPHA specifies the scalar alpha.
[in]A
          A is COMPLEX*16 array of DIMENSION ( LDA, ka ), where ka is
           k  when  TRANS = 'N' or 'n',  and is  n  otherwise.
           Before entry with  TRANS = 'N' or 'n',  the  leading  n by k
           part of the array  A  must contain the matrix  A,  otherwise
           the leading  k by n  part of the array  A  must contain  the
           matrix A.
[in]LDA
          LDA is INTEGER
           On entry, LDA specifies the first dimension of A as declared
           in  the  calling  (sub)  program.   When  TRANS = 'N' or 'n'
           then  LDA must be at least  max( 1, n ), otherwise  LDA must
           be at least  max( 1, k ).
[in]B
          B is COMPLEX*16 array of DIMENSION ( LDB, kb ), where kb is
           k  when  TRANS = 'N' or 'n',  and is  n  otherwise.
           Before entry with  TRANS = 'N' or 'n',  the  leading  n by k
           part of the array  B  must contain the matrix  B,  otherwise
           the leading  k by n  part of the array  B  must contain  the
           matrix B.
[in]LDB
          LDB is INTEGER
           On entry, LDB specifies the first dimension of B as declared
           in  the  calling  (sub)  program.   When  TRANS = 'N' or 'n'
           then  LDB must be at least  max( 1, n ), otherwise  LDB must
           be at least  max( 1, k ).
           Unchanged on exit.
[in]BETA
          BETA is DOUBLE PRECISION .
           On entry, BETA specifies the scalar beta.
[in,out]C
          C is COMPLEX*16 array of DIMENSION ( LDC, n ).
           Before entry  with  UPLO = 'U' or 'u',  the leading  n by n
           upper triangular part of the array C must contain the upper
           triangular part  of the  hermitian matrix  and the strictly
           lower triangular part of C is not referenced.  On exit, the
           upper triangular part of the array  C is overwritten by the
           upper triangular part of the updated matrix.
           Before entry  with  UPLO = 'L' or 'l',  the leading  n by n
           lower triangular part of the array C must contain the lower
           triangular part  of the  hermitian matrix  and the strictly
           upper triangular part of C is not referenced.  On exit, the
           lower triangular part of the array  C is overwritten by the
           lower triangular part of the updated matrix.
           Note that the imaginary parts of the diagonal elements need
           not be set,  they are assumed to be zero,  and on exit they
           are set to zero.
[in]LDC
          LDC is INTEGER
           On entry, LDC specifies the first dimension of C as declared
           in  the  calling  (sub)  program.   LDC  must  be  at  least
           max( 1, n ).
Author:
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
November 2011
Further Details: 
  Level 3 Blas routine.

  -- Written on 8-February-1989.
     Jack Dongarra, Argonne National Laboratory.
     Iain Duff, AERE Harwell.
     Jeremy Du Croz, Numerical Algorithms Group Ltd.
     Sven Hammarling, Numerical Algorithms Group Ltd.

  -- Modified 8-Nov-93 to set C(J,J) to DBLE( C(J,J) ) when BETA = 1.
     Ed Anderson, Cray Research Inc.

Definition at line 199 of file zher2k.f.

Here is the call graph for this function:

Here is the caller graph for this function:

subroutine zherk ( character  UPLO,
character  TRANS,
integer  N,
integer  K,
double precision  ALPHA,
complex*16, dimension(lda,*)  A,
integer  LDA,
double precision  BETA,
complex*16, dimension(ldc,*)  C,
integer  LDC 
)

ZHERK

Purpose: 
 ZHERK  performs one of the hermitian rank k operations

    C := alpha*A*A**H + beta*C,

 or

    C := alpha*A**H*A + beta*C,

 where  alpha and beta  are  real scalars,  C is an  n by n  hermitian
 matrix and  A  is an  n by k  matrix in the  first case and a  k by n
 matrix in the second case.
Parameters:
[in]UPLO
          UPLO is CHARACTER*1
           On  entry,   UPLO  specifies  whether  the  upper  or  lower
           triangular  part  of the  array  C  is to be  referenced  as
           follows:

              UPLO = 'U' or 'u'   Only the  upper triangular part of  C
                                  is to be referenced.

              UPLO = 'L' or 'l'   Only the  lower triangular part of  C
                                  is to be referenced.
[in]TRANS
          TRANS is CHARACTER*1
           On entry,  TRANS  specifies the operation to be performed as
           follows:

              TRANS = 'N' or 'n'   C := alpha*A*A**H + beta*C.

              TRANS = 'C' or 'c'   C := alpha*A**H*A + beta*C.
[in]N
          N is INTEGER
           On entry,  N specifies the order of the matrix C.  N must be
           at least zero.
[in]K
          K is INTEGER
           On entry with  TRANS = 'N' or 'n',  K  specifies  the number
           of  columns   of  the   matrix   A,   and  on   entry   with
           TRANS = 'C' or 'c',  K  specifies  the number of rows of the
           matrix A.  K must be at least zero.
[in]ALPHA
          ALPHA is DOUBLE PRECISION .
           On entry, ALPHA specifies the scalar alpha.
[in]A
          A is COMPLEX*16 array of DIMENSION ( LDA, ka ), where ka is
           k  when  TRANS = 'N' or 'n',  and is  n  otherwise.
           Before entry with  TRANS = 'N' or 'n',  the  leading  n by k
           part of the array  A  must contain the matrix  A,  otherwise
           the leading  k by n  part of the array  A  must contain  the
           matrix A.
[in]LDA
          LDA is INTEGER
           On entry, LDA specifies the first dimension of A as declared
           in  the  calling  (sub)  program.   When  TRANS = 'N' or 'n'
           then  LDA must be at least  max( 1, n ), otherwise  LDA must
           be at least  max( 1, k ).
[in]BETA
          BETA is DOUBLE PRECISION.
           On entry, BETA specifies the scalar beta.
[in,out]C
          C is COMPLEX*16 array of DIMENSION ( LDC, n ).
           Before entry  with  UPLO = 'U' or 'u',  the leading  n by n
           upper triangular part of the array C must contain the upper
           triangular part  of the  hermitian matrix  and the strictly
           lower triangular part of C is not referenced.  On exit, the
           upper triangular part of the array  C is overwritten by the
           upper triangular part of the updated matrix.
           Before entry  with  UPLO = 'L' or 'l',  the leading  n by n
           lower triangular part of the array C must contain the lower
           triangular part  of the  hermitian matrix  and the strictly
           upper triangular part of C is not referenced.  On exit, the
           lower triangular part of the array  C is overwritten by the
           lower triangular part of the updated matrix.
           Note that the imaginary parts of the diagonal elements need
           not be set,  they are assumed to be zero,  and on exit they
           are set to zero.
[in]LDC
          LDC is INTEGER
           On entry, LDC specifies the first dimension of C as declared
           in  the  calling  (sub)  program.   LDC  must  be  at  least
           max( 1, n ).
Author:
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
November 2011
Further Details: 
  Level 3 Blas routine.

  -- Written on 8-February-1989.
     Jack Dongarra, Argonne National Laboratory.
     Iain Duff, AERE Harwell.
     Jeremy Du Croz, Numerical Algorithms Group Ltd.
     Sven Hammarling, Numerical Algorithms Group Ltd.

  -- Modified 8-Nov-93 to set C(J,J) to DBLE( C(J,J) ) when BETA = 1.
     Ed Anderson, Cray Research Inc.

Definition at line 174 of file zherk.f.

Here is the call graph for this function:

Here is the caller graph for this function:

subroutine zsymm ( character  SIDE,
character  UPLO,
integer  M,
integer  N,
complex*16  ALPHA,
complex*16, dimension(lda,*)  A,
integer  LDA,
complex*16, dimension(ldb,*)  B,
integer  LDB,
complex*16  BETA,
complex*16, dimension(ldc,*)  C,
integer  LDC 
)

ZSYMM

Purpose: 
 ZSYMM  performs one of the matrix-matrix operations

    C := alpha*A*B + beta*C,

 or

    C := alpha*B*A + beta*C,

 where  alpha and beta are scalars, A is a symmetric matrix and  B and
 C are m by n matrices.
Parameters:
[in]SIDE
          SIDE is CHARACTER*1
           On entry,  SIDE  specifies whether  the  symmetric matrix  A
           appears on the  left or right  in the  operation as follows:

              SIDE = 'L' or 'l'   C := alpha*A*B + beta*C,

              SIDE = 'R' or 'r'   C := alpha*B*A + beta*C,
[in]UPLO
          UPLO is CHARACTER*1
           On  entry,   UPLO  specifies  whether  the  upper  or  lower
           triangular  part  of  the  symmetric  matrix   A  is  to  be
           referenced as follows:

              UPLO = 'U' or 'u'   Only the upper triangular part of the
                                  symmetric matrix is to be referenced.

              UPLO = 'L' or 'l'   Only the lower triangular part of the
                                  symmetric matrix is to be referenced.
[in]M
          M is INTEGER
           On entry,  M  specifies the number of rows of the matrix  C.
           M  must be at least zero.
[in]N
          N is INTEGER
           On entry, N specifies the number of columns of the matrix C.
           N  must be at least zero.
[in]ALPHA
          ALPHA is COMPLEX*16
           On entry, ALPHA specifies the scalar alpha.
[in]A
          A is COMPLEX*16 array of DIMENSION ( LDA, ka ), where ka is
           m  when  SIDE = 'L' or 'l'  and is n  otherwise.
           Before entry  with  SIDE = 'L' or 'l',  the  m by m  part of
           the array  A  must contain the  symmetric matrix,  such that
           when  UPLO = 'U' or 'u', the leading m by m upper triangular
           part of the array  A  must contain the upper triangular part
           of the  symmetric matrix and the  strictly  lower triangular
           part of  A  is not referenced,  and when  UPLO = 'L' or 'l',
           the leading  m by m  lower triangular part  of the  array  A
           must  contain  the  lower triangular part  of the  symmetric
           matrix and the  strictly upper triangular part of  A  is not
           referenced.
           Before entry  with  SIDE = 'R' or 'r',  the  n by n  part of
           the array  A  must contain the  symmetric matrix,  such that
           when  UPLO = 'U' or 'u', the leading n by n upper triangular
           part of the array  A  must contain the upper triangular part
           of the  symmetric matrix and the  strictly  lower triangular
           part of  A  is not referenced,  and when  UPLO = 'L' or 'l',
           the leading  n by n  lower triangular part  of the  array  A
           must  contain  the  lower triangular part  of the  symmetric
           matrix and the  strictly upper triangular part of  A  is not
           referenced.
[in]LDA
          LDA is INTEGER
           On entry, LDA specifies the first dimension of A as declared
           in the  calling (sub) program. When  SIDE = 'L' or 'l'  then
           LDA must be at least  max( 1, m ), otherwise  LDA must be at
           least max( 1, n ).
[in]B
          B is COMPLEX*16 array of DIMENSION ( LDB, n ).
           Before entry, the leading  m by n part of the array  B  must
           contain the matrix B.
[in]LDB
          LDB is INTEGER
           On entry, LDB specifies the first dimension of B as declared
           in  the  calling  (sub)  program.   LDB  must  be  at  least
           max( 1, m ).
[in]BETA
          BETA is COMPLEX*16
           On entry,  BETA  specifies the scalar  beta.  When  BETA  is
           supplied as zero then C need not be set on input.
[in,out]C
          C is COMPLEX*16 array of DIMENSION ( LDC, n ).
           Before entry, the leading  m by n  part of the array  C must
           contain the matrix  C,  except when  beta  is zero, in which
           case C need not be set on entry.
           On exit, the array  C  is overwritten by the  m by n updated
           matrix.
[in]LDC
          LDC is INTEGER
           On entry, LDC specifies the first dimension of C as declared
           in  the  calling  (sub)  program.   LDC  must  be  at  least
           max( 1, m ).
Author:
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
November 2011
Further Details: 
  Level 3 Blas routine.

  -- Written on 8-February-1989.
     Jack Dongarra, Argonne National Laboratory.
     Iain Duff, AERE Harwell.
     Jeremy Du Croz, Numerical Algorithms Group Ltd.
     Sven Hammarling, Numerical Algorithms Group Ltd.

Definition at line 190 of file zsymm.f.

Here is the call graph for this function:

Here is the caller graph for this function:

subroutine zsyr2k ( character  UPLO,
character  TRANS,
integer  N,
integer  K,
complex*16  ALPHA,
complex*16, dimension(lda,*)  A,
integer  LDA,
complex*16, dimension(ldb,*)  B,
integer  LDB,
complex*16  BETA,
complex*16, dimension(ldc,*)  C,
integer  LDC 
)

ZSYR2K

Purpose: 
 ZSYR2K  performs one of the symmetric rank 2k operations

    C := alpha*A*B**T + alpha*B*A**T + beta*C,

 or

    C := alpha*A**T*B + alpha*B**T*A + beta*C,

 where  alpha and beta  are scalars,  C is an  n by n symmetric matrix
 and  A and B  are  n by k  matrices  in the  first  case  and  k by n
 matrices in the second case.
Parameters:
[in]UPLO
          UPLO is CHARACTER*1
           On  entry,   UPLO  specifies  whether  the  upper  or  lower
           triangular  part  of the  array  C  is to be  referenced  as
           follows:

              UPLO = 'U' or 'u'   Only the  upper triangular part of  C
                                  is to be referenced.

              UPLO = 'L' or 'l'   Only the  lower triangular part of  C
                                  is to be referenced.
[in]TRANS
          TRANS is CHARACTER*1
           On entry,  TRANS  specifies the operation to be performed as
           follows:

              TRANS = 'N' or 'n'    C := alpha*A*B**T + alpha*B*A**T +
                                         beta*C.

              TRANS = 'T' or 't'    C := alpha*A**T*B + alpha*B**T*A +
                                         beta*C.
[in]N
          N is INTEGER
           On entry,  N specifies the order of the matrix C.  N must be
           at least zero.
[in]K
          K is INTEGER
           On entry with  TRANS = 'N' or 'n',  K  specifies  the number
           of  columns  of the  matrices  A and B,  and on  entry  with
           TRANS = 'T' or 't',  K  specifies  the number of rows of the
           matrices  A and B.  K must be at least zero.
[in]ALPHA
          ALPHA is COMPLEX*16
           On entry, ALPHA specifies the scalar alpha.
[in]A
          A is COMPLEX*16 array of DIMENSION ( LDA, ka ), where ka is
           k  when  TRANS = 'N' or 'n',  and is  n  otherwise.
           Before entry with  TRANS = 'N' or 'n',  the  leading  n by k
           part of the array  A  must contain the matrix  A,  otherwise
           the leading  k by n  part of the array  A  must contain  the
           matrix A.
[in]LDA
          LDA is INTEGER
           On entry, LDA specifies the first dimension of A as declared
           in  the  calling  (sub)  program.   When  TRANS = 'N' or 'n'
           then  LDA must be at least  max( 1, n ), otherwise  LDA must
           be at least  max( 1, k ).
[in]B
          B is COMPLEX*16 array of DIMENSION ( LDB, kb ), where kb is
           k  when  TRANS = 'N' or 'n',  and is  n  otherwise.
           Before entry with  TRANS = 'N' or 'n',  the  leading  n by k
           part of the array  B  must contain the matrix  B,  otherwise
           the leading  k by n  part of the array  B  must contain  the
           matrix B.
[in]LDB
          LDB is INTEGER
           On entry, LDB specifies the first dimension of B as declared
           in  the  calling  (sub)  program.   When  TRANS = 'N' or 'n'
           then  LDB must be at least  max( 1, n ), otherwise  LDB must
           be at least  max( 1, k ).
[in]BETA
          BETA is COMPLEX*16
           On entry, BETA specifies the scalar beta.
[in,out]C
          C is COMPLEX*16 array of DIMENSION ( LDC, n ).
           Before entry  with  UPLO = 'U' or 'u',  the leading  n by n
           upper triangular part of the array C must contain the upper
           triangular part  of the  symmetric matrix  and the strictly
           lower triangular part of C is not referenced.  On exit, the
           upper triangular part of the array  C is overwritten by the
           upper triangular part of the updated matrix.
           Before entry  with  UPLO = 'L' or 'l',  the leading  n by n
           lower triangular part of the array C must contain the lower
           triangular part  of the  symmetric matrix  and the strictly
           upper triangular part of C is not referenced.  On exit, the
           lower triangular part of the array  C is overwritten by the
           lower triangular part of the updated matrix.
[in]LDC
          LDC is INTEGER
           On entry, LDC specifies the first dimension of C as declared
           in  the  calling  (sub)  program.   LDC  must  be  at  least
           max( 1, n ).
Author:
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
November 2011
Further Details: 
  Level 3 Blas routine.

  -- Written on 8-February-1989.
     Jack Dongarra, Argonne National Laboratory.
     Iain Duff, AERE Harwell.
     Jeremy Du Croz, Numerical Algorithms Group Ltd.
     Sven Hammarling, Numerical Algorithms Group Ltd.

Definition at line 189 of file zsyr2k.f.

Here is the call graph for this function:

Here is the caller graph for this function:

subroutine zsyrk ( character  UPLO,
character  TRANS,
integer  N,
integer  K,
complex*16  ALPHA,
complex*16, dimension(lda,*)  A,
integer  LDA,
complex*16  BETA,
complex*16, dimension(ldc,*)  C,
integer  LDC 
)

ZSYRK

Purpose: 
 ZSYRK  performs one of the symmetric rank k operations

    C := alpha*A*A**T + beta*C,

 or

    C := alpha*A**T*A + beta*C,

 where  alpha and beta  are scalars,  C is an  n by n symmetric matrix
 and  A  is an  n by k  matrix in the first case and a  k by n  matrix
 in the second case.
Parameters:
[in]UPLO
          UPLO is CHARACTER*1
           On  entry,   UPLO  specifies  whether  the  upper  or  lower
           triangular  part  of the  array  C  is to be  referenced  as
           follows:

              UPLO = 'U' or 'u'   Only the  upper triangular part of  C
                                  is to be referenced.

              UPLO = 'L' or 'l'   Only the  lower triangular part of  C
                                  is to be referenced.
[in]TRANS
          TRANS is CHARACTER*1
           On entry,  TRANS  specifies the operation to be performed as
           follows:

              TRANS = 'N' or 'n'   C := alpha*A*A**T + beta*C.

              TRANS = 'T' or 't'   C := alpha*A**T*A + beta*C.
[in]N
          N is INTEGER
           On entry,  N specifies the order of the matrix C.  N must be
           at least zero.
[in]K
          K is INTEGER
           On entry with  TRANS = 'N' or 'n',  K  specifies  the number
           of  columns   of  the   matrix   A,   and  on   entry   with
           TRANS = 'T' or 't',  K  specifies  the number of rows of the
           matrix A.  K must be at least zero.
[in]ALPHA
          ALPHA is COMPLEX*16
           On entry, ALPHA specifies the scalar alpha.
[in]A
          A is COMPLEX*16 array of DIMENSION ( LDA, ka ), where ka is
           k  when  TRANS = 'N' or 'n',  and is  n  otherwise.
           Before entry with  TRANS = 'N' or 'n',  the  leading  n by k
           part of the array  A  must contain the matrix  A,  otherwise
           the leading  k by n  part of the array  A  must contain  the
           matrix A.
[in]LDA
          LDA is INTEGER
           On entry, LDA specifies the first dimension of A as declared
           in  the  calling  (sub)  program.   When  TRANS = 'N' or 'n'
           then  LDA must be at least  max( 1, n ), otherwise  LDA must
           be at least  max( 1, k ).
[in]BETA
          BETA is COMPLEX*16
           On entry, BETA specifies the scalar beta.
[in,out]C
          C is COMPLEX*16 array of DIMENSION ( LDC, n ).
           Before entry  with  UPLO = 'U' or 'u',  the leading  n by n
           upper triangular part of the array C must contain the upper
           triangular part  of the  symmetric matrix  and the strictly
           lower triangular part of C is not referenced.  On exit, the
           upper triangular part of the array  C is overwritten by the
           upper triangular part of the updated matrix.
           Before entry  with  UPLO = 'L' or 'l',  the leading  n by n
           lower triangular part of the array C must contain the lower
           triangular part  of the  symmetric matrix  and the strictly
           upper triangular part of C is not referenced.  On exit, the
           lower triangular part of the array  C is overwritten by the
           lower triangular part of the updated matrix.
[in]LDC
          LDC is INTEGER
           On entry, LDC specifies the first dimension of C as declared
           in  the  calling  (sub)  program.   LDC  must  be  at  least
           max( 1, n ).
Author:
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
November 2011
Further Details: 
  Level 3 Blas routine.

  -- Written on 8-February-1989.
     Jack Dongarra, Argonne National Laboratory.
     Iain Duff, AERE Harwell.
     Jeremy Du Croz, Numerical Algorithms Group Ltd.
     Sven Hammarling, Numerical Algorithms Group Ltd.

Definition at line 168 of file zsyrk.f.

Here is the call graph for this function:

Here is the caller graph for this function:

subroutine ztrmm ( character  SIDE,
character  UPLO,
character  TRANSA,
character  DIAG,
integer  M,
integer  N,
complex*16  ALPHA,
complex*16, dimension(lda,*)  A,
integer  LDA,
complex*16, dimension(ldb,*)  B,
integer  LDB 
)

ZTRMM

Purpose: 
 ZTRMM  performs one of the matrix-matrix operations

    B := alpha*op( A )*B,   or   B := alpha*B*op( A )

 where  alpha  is a scalar,  B  is an m by n matrix,  A  is a unit, or
 non-unit,  upper or lower triangular matrix  and  op( A )  is one  of

    op( A ) = A   or   op( A ) = A**T   or   op( A ) = A**H.
Parameters:
[in]SIDE
          SIDE is CHARACTER*1
           On entry,  SIDE specifies whether  op( A ) multiplies B from
           the left or right as follows:

              SIDE = 'L' or 'l'   B := alpha*op( A )*B.

              SIDE = 'R' or 'r'   B := alpha*B*op( A ).
[in]UPLO
          UPLO is CHARACTER*1
           On entry, UPLO specifies whether the matrix A is an upper or
           lower triangular matrix as follows:

              UPLO = 'U' or 'u'   A is an upper triangular matrix.

              UPLO = 'L' or 'l'   A is a lower triangular matrix.
[in]TRANSA
          TRANSA is CHARACTER*1
           On entry, TRANSA specifies the form of op( A ) to be used in
           the matrix multiplication as follows:

              TRANSA = 'N' or 'n'   op( A ) = A.

              TRANSA = 'T' or 't'   op( A ) = A**T.

              TRANSA = 'C' or 'c'   op( A ) = A**H.
[in]DIAG
          DIAG is CHARACTER*1
           On entry, DIAG specifies whether or not A is unit triangular
           as follows:

              DIAG = 'U' or 'u'   A is assumed to be unit triangular.

              DIAG = 'N' or 'n'   A is not assumed to be unit
                                  triangular.
[in]M
          M is INTEGER
           On entry, M specifies the number of rows of B. M must be at
           least zero.
[in]N
          N is INTEGER
           On entry, N specifies the number of columns of B.  N must be
           at least zero.
[in]ALPHA
          ALPHA is COMPLEX*16
           On entry,  ALPHA specifies the scalar  alpha. When  alpha is
           zero then  A is not referenced and  B need not be set before
           entry.
[in]A
          A is COMPLEX*16 array of DIMENSION ( LDA, k ), where k is m
           when  SIDE = 'L' or 'l'  and is  n  when  SIDE = 'R' or 'r'.
           Before entry  with  UPLO = 'U' or 'u',  the  leading  k by k
           upper triangular part of the array  A must contain the upper
           triangular matrix  and the strictly lower triangular part of
           A is not referenced.
           Before entry  with  UPLO = 'L' or 'l',  the  leading  k by k
           lower triangular part of the array  A must contain the lower
           triangular matrix  and the strictly upper triangular part of
           A is not referenced.
           Note that when  DIAG = 'U' or 'u',  the diagonal elements of
           A  are not referenced either,  but are assumed to be  unity.
[in]LDA
          LDA is INTEGER
           On entry, LDA specifies the first dimension of A as declared
           in the calling (sub) program.  When  SIDE = 'L' or 'l'  then
           LDA  must be at least  max( 1, m ),  when  SIDE = 'R' or 'r'
           then LDA must be at least max( 1, n ).
[in]B
          B is (input/output) COMPLEX*16 array of DIMENSION ( LDB, n ).
           Before entry,  the leading  m by n part of the array  B must
           contain the matrix  B,  and  on exit  is overwritten  by the
           transformed matrix.
[in]LDB
          LDB is INTEGER
           On entry, LDB specifies the first dimension of B as declared
           in  the  calling  (sub)  program.   LDB  must  be  at  least
           max( 1, m ).
Author:
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
November 2011
Further Details: 
  Level 3 Blas routine.

  -- Written on 8-February-1989.
     Jack Dongarra, Argonne National Laboratory.
     Iain Duff, AERE Harwell.
     Jeremy Du Croz, Numerical Algorithms Group Ltd.
     Sven Hammarling, Numerical Algorithms Group Ltd.

Definition at line 178 of file ztrmm.f.

Here is the call graph for this function:

Here is the caller graph for this function:

subroutine ztrsm ( character  SIDE,
character  UPLO,
character  TRANSA,
character  DIAG,
integer  M,
integer  N,
complex*16  ALPHA,
complex*16, dimension(lda,*)  A,
integer  LDA,
complex*16, dimension(ldb,*)  B,
integer  LDB 
)

ZTRSM

Purpose: 
 ZTRSM  solves one of the matrix equations

    op( A )*X = alpha*B,   or   X*op( A ) = alpha*B,

 where alpha is a scalar, X and B are m by n matrices, A is a unit, or
 non-unit,  upper or lower triangular matrix  and  op( A )  is one  of

    op( A ) = A   or   op( A ) = A**T   or   op( A ) = A**H.

 The matrix X is overwritten on B.
Parameters:
[in]SIDE
          SIDE is CHARACTER*1
           On entry, SIDE specifies whether op( A ) appears on the left
           or right of X as follows:

              SIDE = 'L' or 'l'   op( A )*X = alpha*B.

              SIDE = 'R' or 'r'   X*op( A ) = alpha*B.
[in]UPLO
          UPLO is CHARACTER*1
           On entry, UPLO specifies whether the matrix A is an upper or
           lower triangular matrix as follows:

              UPLO = 'U' or 'u'   A is an upper triangular matrix.

              UPLO = 'L' or 'l'   A is a lower triangular matrix.
[in]TRANSA
          TRANSA is CHARACTER*1
           On entry, TRANSA specifies the form of op( A ) to be used in
           the matrix multiplication as follows:

              TRANSA = 'N' or 'n'   op( A ) = A.

              TRANSA = 'T' or 't'   op( A ) = A**T.

              TRANSA = 'C' or 'c'   op( A ) = A**H.
[in]DIAG
          DIAG is CHARACTER*1
           On entry, DIAG specifies whether or not A is unit triangular
           as follows:

              DIAG = 'U' or 'u'   A is assumed to be unit triangular.

              DIAG = 'N' or 'n'   A is not assumed to be unit
                                  triangular.
[in]M
          M is INTEGER
           On entry, M specifies the number of rows of B. M must be at
           least zero.
[in]N
          N is INTEGER
           On entry, N specifies the number of columns of B.  N must be
           at least zero.
[in]ALPHA
          ALPHA is COMPLEX*16
           On entry,  ALPHA specifies the scalar  alpha. When  alpha is
           zero then  A is not referenced and  B need not be set before
           entry.
[in]A
          A is COMPLEX*16 array of DIMENSION ( LDA, k ),
           where k is m when SIDE = 'L' or 'l'  
             and k is n when SIDE = 'R' or 'r'.
           Before entry  with  UPLO = 'U' or 'u',  the  leading  k by k
           upper triangular part of the array  A must contain the upper
           triangular matrix  and the strictly lower triangular part of
           A is not referenced.
           Before entry  with  UPLO = 'L' or 'l',  the  leading  k by k
           lower triangular part of the array  A must contain the lower
           triangular matrix  and the strictly upper triangular part of
           A is not referenced.
           Note that when  DIAG = 'U' or 'u',  the diagonal elements of
           A  are not referenced either,  but are assumed to be  unity.
[in]LDA
          LDA is INTEGER
           On entry, LDA specifies the first dimension of A as declared
           in the calling (sub) program.  When  SIDE = 'L' or 'l'  then
           LDA  must be at least  max( 1, m ),  when  SIDE = 'R' or 'r'
           then LDA must be at least max( 1, n ).
[in,out]B
          B is COMPLEX*16 array of DIMENSION ( LDB, n ).
           Before entry,  the leading  m by n part of the array  B must
           contain  the  right-hand  side  matrix  B,  and  on exit  is
           overwritten by the solution matrix  X.
[in]LDB
          LDB is INTEGER
           On entry, LDB specifies the first dimension of B as declared
           in  the  calling  (sub)  program.   LDB  must  be  at  least
           max( 1, m ).
Author:
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
November 2011
Further Details: 
  Level 3 Blas routine.

  -- Written on 8-February-1989.
     Jack Dongarra, Argonne National Laboratory.
     Iain Duff, AERE Harwell.
     Jeremy Du Croz, Numerical Algorithms Group Ltd.
     Sven Hammarling, Numerical Algorithms Group Ltd.

Definition at line 181 of file ztrsm.f.

Here is the call graph for this function:

Here is the caller graph for this function: