# do not use ' sign inside strings, but replace with `

* LANG=en

* charset=ISO-8859-1

#* _DATE_TIME="%d %b %Y %H:%M:%S" 
* _DATE_TIME="%d %b %Y %r" 

#* _TIME="%H:%M:%S" 
* _TIME="%r" 

#* _DATE_H_M="%d %b %Y %H:%M" 
* _DATE_H_M="%d %b %Y %r" 
#* _H_M="%H:%M" 
* _H_M="%r" 

* _DATE="%d %b %Y" 

* __001=help
* _BACK=back


* _WWW="http://en.coolsolutions.eu"

# setup setupall
SE _GSETTINGS_="Global settings"
SE _SETTINGS_="Settings"

SE _AUT_IN="automatic limiting of incoming traffic"
SE _AUT_OUT="automatic limiting of outgoing traffic"

SE _I_IN="one more in incoming traffic"
SE _I_OUT="one more in outgoing traffic"

SE _SET_REL_IPS="* to activate changes of these settings, ips firewall must be reloaded"
SE _SET_REL_QOS="* to activate changes of these settings, qos regulator must be reloaded"
SE _BTN_SET_LN="set current language as default"

SE _SET_ALL1="all computers(1-254 excl. ADR) / classes(256-290) in local network " 
SE _SET_ALL2=" ( e.g. 2 3 4 5 6 7 8 9 275 276 )" 

SE _SET_SUBNET="local network (e.g. 192.168.0.)"
SE _SET_SMASK="local network sh
ort mask (e.g. 24)"
SE _SET_KEEP_DROUTE="keep default route :<br> <b><i>check</i></b> for DSL, FrameRelay etc<br> <b><i>uncheck</i></b> for ADSL"

SE _SET_LOC_ADD="firewall`s local network address (e.g. 254)"
SE _SET_LOC_INT="firewall`s local network interface (e.g. eth0)"

SE _SET_ANY_DEV="interface to internet (e.g. ppp+, ppp0, eth1)"
SE _SET_PPP_TYP="interface to internet is of type ppp (e.g. ADSL)"

SE _SET_ANY_IP="ip address of interface to internet :<br> static for DSL, FrameRelay etc (e.g. 212.244.167.121),<br> dynamic for ADSL ()"
SE _SET_LOG_PAC="log packets info"
SE _SET_IN_BAND="incoming traffic bandwidth<br>assigned to qos regulator<br>e.g. 100.0 kB(ytes)" 
SE _SET_OUT_BAND="outgoing traffic bandwidth<br>assigned to qos regulator<br>e.g. 50.0 kB(ytes)" 
SE _SET_IN_MAX="incoming traffic indices not greater then ...<br>e.g. 100.0 kB(ytes)"
SE _SET_OUT_MAX="outgoing traffic indices not greater then ...<br>e.g. 50.0 kB(ytes)"
SE _SET_CORRECTION="correction of traffic load indices, e.g. 0.975"
SE _SET_BAND100="100%% on gauge means ? kB(ytes), e.g. 200"

SE _SET_LOG_SCALE="load gauges with logarithmic scale"

SE _SET_QOS_HTB="traffic shaping based on<br>HTB queue discipline (insted of default CBQ)"
SE _SET_QOS_HFSC="traffic shaping based on<br>HFSC queue discipline (insted of default CBQ)"

SE _SET_MENU_ACTIVE="menu active checked"
SE _SET_MENU_60="menu 60 sec. chosen"
SE _SET_MENU_COMPACT="menu compact checked"

SE _SET_QNAMES="computers` names instead of IPs"
SE _SET_FQNAMES="peers` FQNs instead of IPs"
SE _SET_SMA_RES="after how many seconds a resolving of ip to FQN should be stopped"
SE _SET_IPS_DAYS="how many days packet logs should be kept"

SE _SET_RRD="using load graphs and load database" 
SE _SET_IPS="<b>ips</b> firewall is active" 
SE _SET_QOS="<b>qos</b> regulator is active" 

SE _SET_IMQ="imq is available and will be used"
SE _SET_QOS3="simple own classes"


SE _TRAF_IN=" incoming traffic shaping "
SE _TRAF_OUT=" outgoing traffic shaping "

SE _ASSI_PRIO="assigned priority (not HFSC)"
SE _ASSI_BAND="assigned band"
# borrow entleihen , pozyczac od kogos, brac kredyt
SE _QOS_BOUNDED="can't borrow"
# lend verleihen , pozyczac komus , udzielac kredytu
SE _QOS_ISOLATED="can't lend (only CBQ and HFSC, not HTB)"
SE _QOS_AUTO="general rules"
SE _ASSI_BAND2="guaranteed band"
SE _ASSI_TIME="in first"
SE _HFSC_ADV="advanced HFSC"


SE _BTN_EXAM=Examples
SE _BTN_SERV=Services

SE _BTN_SET=Set
SE _BTN_CANCEL=Cancel
SE _BTN_ON="Grant"
SE _BTN_OFF="Deny"
SE _BTN_CLEAR=Clear
SE _BTN_ZERO="Reset"
SE _BTN_BACK="Back"

SE _BTN_REL_QOS="reload qos regulator"
SE _BTN_REL_IPS="reload ips firewall"

SE _IS_TON="granted"
SE _IS_TOFF="denied"

SE _IPS_IT="access to internet is " 
SE _LAN_ROUTER="access to router is " 
SE _WAN_LAN="access from internet is " 

SE _IS_BON="blocked"
SE _IS_BOFF="not blocked"

SE _SET_STR_ALG="pattern matching strategy used for detecting forbidden strings" 
SE _IPS_ADM2="ignore black list, forbidden strings and squid : " 

SE _IPS_ADM="www blockade and notification : " 
SE _IPS_NAT="using SNAT : " 
SE _ASSI_NAT2="SNAT to another IP"

SE _IPS_RRD="using load graphs and load database : " 
SE _IPS_LOG="log packets info : "

SE _SETTINGS_ADMIN="administration"
SE _SET_ADMIN_IP1="www blockade and notification<br>by redirecting to ip:port  (e.g. 192.168.1.1:809)"
SE _SET_BLACK_IP="www of black list redirected to ip:port  (e.g. 192.168.1.2:809)"

SE _IS_ON="turned on"
SE _IS_OFF="turned off"

SE __BTN_ON="Turn on"
SE __BTN_OFF="Turn off"

SE _BTN_BON="Block"
SE _BTN_BOFF="Unblock"


SE _MAC_ADD="address MAC"  

SE _PTS_PORTS="TCP ports"
SE _PTS_ALLOW="allowed"
SE _PTS_DENY="denied"
SE _PTS_IGN="not used"

SE _PUS_PORTS="UDP ports"
SE _PUS_ALLOW="allowed"
SE _PUS_DENY="denied"
SE _PUS_IGN="not used"

SE _NAM_NAM="NAME"
SE _NAM_LONG="MORE"
SE _NAM_GRO="GROUP"

SE _ADS_IPS="IP addresses - ports"
SE _ADS_ALLOW="allowed"
SE _ADS_DENY="denied"
SE _ADS_IGN="not used"

SE _ADS_CLI="client"
SE _ADS_SER="server"

SE _PTS_CLI="client"
SE _PTS_SER="server"

SE _PUS_CLI="client"
SE _PUS_SER="server"


SE _IND_2_CLASS="this computer's traffic belongs to classes<br>(if they exist)"
SE _IND_0=yes
SE _IND_1=no
SE _IND_2_CLASS="this computer's traffic belongs to classes<br>(if they exist)"
SE _IND_0=yes
SE _IND_1=no
SE _IND_2_CLASS2="this class has higher priority"

SE _INDH_CLASS="priority of the class"
SE _INDH_0="normal"
SE _INDH_1="higher"
SE _INDH_2="even higher"
SE _INDH_3="the highest"

SE _IMQ_CLASS="this is router's / server's own class"
SE _IMQ_0=no
SE _IMQ_1=yes


SE _NOA_COMP="this computer increases the count<br>of active computers/classes"
SE _NOA_CLASS="this class increases the count<br>of active computers/classes"
SE _NOA_0=yes
SE _NOA_1=no

SE _SOQ_COMP="this computer is allways indicated<br>in the main window"
SE _SOQ_CLASS="this class is allways indicated<br>in the main window"
SE _SOQ_0=yes
SE _SOQ_1=no

SE _VPN_CLASS="access over PPTP is enabled"
SE _VPN_0=no
SE _VPN_1=yes
SE _SET_PPTP="server settings"




SE _GROC_="client : using services"  
SE _GROC_IPS="protocols ports computers"  

SE _GROS_="server : supplying services"  
SE _GROS_IPS="protocols ports servers"  

SE _REMOVING="removing"
SE _WRITING="writing"
SE _OP_FAILED="operation failed !"
SE _EXECUTING="executing"

SE _SET_TOUT_EST="how many seconds an unused established TCP connection should be kept,<br>several minutes if CONNLIMIT used, otherwise: empty"
SE _SET_CONNTR_MAX="maximal count of tracked connections<br>(default 32768)"

SE _ASSI_CON="maximal count of TCP connections"
SE _TR_IN="incoming traffic"
SE _TR_OUT="outgoing traffic"
SE _ASSI_LIM="maximal count of TCP connections per second"
SE _ASSI_LIU="maximal count of UDP packets per second"

# ipp2p
SE _IPP2P_RELOAD="changes of IPP2P are valid after reloading<br>of firewall and regulator !
SE _SET_CO_IPP2P="maximal count of TCP connections"
SE _SET_IPP2P="mode of ipp2p2 extension to identify p2p traffic"
SE _IPP2P_NU="unused"
SE _IPP2P_BLOCK="detect and block"
SE _IPP2P_FORWARD="detect and forward to the class"
SE _IPP2P_DROP="drop so many packets as possible, if other methods fail"

SE _DROP_IPP2P="try to block:" 
SE _IPP2P_EDK="eDonkey, eMule, Kademila" 
SE _IPP2P_KAZAA="KaZaA, FastTrack" 
SE _IPP2P_GNU="Gnutella" 
SE _IPP2P_DC="DirectConnect" 
SE _IPP2P_BIT="BitTorrent" 
SE _IPP2P_APPLE="AppleJuice" 
SE _IPP2P_WINMX="WinMX" 
SE _IPP2P_SOUL="SoulSeek" 
SE _IPP2P_ARES="Ares, AresLite" 
SE _IPP2P_WASTE="Waste" 
SE _IPP2P_MUTE="Mute" 
SE _IPP2P_XDCC="Xdcc" 



SE _SET_LANDEV="other local network interfaces (e.g. eth2 eth3)"
SE _ASSI_ALDEV="network interface of another LAN (e.g. eth2)"  
SE _ASSI_ALIP="IP address in another LAN"  

SE _SETTINGS_BRO="mode"

SE _SET_IPS_LAN2="enable traffic between LANs"
SE _SET_IPS_DHCP2="forward DHCP requests"

SE _SETTINGS_AUTO="activating the automatic regulator for the WAN connection"

SE _SETTINGS_LAN="local network settings"

SE _SETTINGS_WAN="settings of the WAN connection"

SE _SETTINGS_SQUID="proxy server settings"
SE _SET_SQUID="redirect www traffic"
SE _SET_SQUID_HIT_TOS="the traffic marked with TOS value treat as local"
SE _SET_SQUID_PORT="to port"


SE _SETTINGS_QOS="settings of traffic shaping for the WAN connection"
SE _SETTINGS_IPS="settings of services"

SE _SETTINGS_MENU="some menu seetings"

SE _SETTINGS_NAMES="resolving names"

SE _SETTINGS_MISC="miscelleanous"

SE _SETTINGS_DEF="defense"
SE _SET_WAN_PIN="maximal count of ping connections per second<br>from WAN to router"
SE _SET_WAN_SYN="maximal count of TCP connections per second<br>from WAN to router"

SE _SET_LAN_PIN="maximal count of ping connections per second<br>from LAN to router"
SE _SET_LAN_SYN="maximal count of TCP connections per second<br>from LAN to router"

SE _SET_LAN_UDP="maximal count of UDP packets per second<br>from LAN to router"
SE _SET_WAN_UDP="maximal count of UDP packets per second<br>from WAN to router"


SE _SETTINGS_LIM="global limits"
SE _SET_TOT_LIM="use global limits, instead of individual limits for computers: CONNLMIT, LIMIT, LIMIU"

SE _SET_CONN_IN="maximal count of TCP connections<br>from WAN to LAN"
SE _SET_CONN_OUT="maximal count of TCP connections<br>from LAN to WAN"

SE _SET_LIMIT_IN="maximal count of TCP connections per second<br>from WAN to LAN"
SE _SET_LIMIT_OUT="maximal count of TCP connections per second<br>from LAN to WAN"

SE _SET_LIMIU_IN="maximal count of UDP packets per second<br>from WAN to LAN"
SE _SET_LIMIU_OUT="maximal count of UDP packets per second<br>from LAN to WAN"




# router setup
RE _SETTINGS_="Settings"

RE _STRINGS_LIST="forbidden strings in WWW traffic"
RE _TRAF_IN=" incoming traffic "
RE _TRAF_OUT=" outgoing traffic "
RE _SALL_RELOAD="changes are valid after reloading of firewall"

RE _BLACK_LIST="black list"
RE _RALL_RELOAD="changes are valid after reloading of firewall"

RE _BTN_CANCEL=Cancel
RE _BTN_SAVE="Save"

RE _BCLI_EDIT="simple editor"
RE _BCLI_INT="interpretation"

RE _BCLI_SIP="server IP"
RE _BCLI_RIP="router IP"
RE _BCLI_PROT="protocol"
RE _BCLI_PORTS="ports"

RE _BOX_CLI="Router as client - which WAN servers, on which ports router can connect to ."   
RE _BCLI_RELOAD="changes are valid after reloading of firewall"

RE _BSER_EDIT="simple editor"
RE _BSER_INT="interpretation"

RE _BSER_SIP="host IP"
RE _BSER_RIP="router IP"
RE _BSER_PROT="protocol"
RE _BSER_PORTS="ports"

RE _BOX_SER="Router as server - which WAN hosts, on which ports can connect to the router ."   
RE _BSER_RELOAD="changes are valid after reloading of firewall"

RE _BDNA_EDIT="simple editor"
RE _BDNA_INT="interpretation"

RE  _BDNA_PROT="protocol"
RE  _BDNA_DIP="from IP"
RE  _BDNA_DPORT="port"
RE  _BDNA_2IP="to IP"
RE  _BDNA_2PORT="port"

RE _BOX_DNA="Router grants access to servers in LAN - redirects ports ."   
RE _BDNA_RELOAD="changes are valid after reloading of firewall"

RE _R_ALL="all"
RE _R_NONE="none"
RE _R_DEF="default"
RE _R_ANY="any"




#details
DE _REF=refresh
DE _PAU=pause

DE _SHOW="show period"
DE _LAST_10S="the last 10 seconds"
DE _10S="last 10 sec."
DE _LAST_MIN="the last minute"
DE _MIN="last minute"
DE _ANY_PERIOD="another period"
DE _ANY="choose"
DE _PER="chosen period"

DE _PROT="protocol"
DE _FROM_IP_PORT="from (ip port)"
DE _TO_PORT_IP="to (port ip)"
DE _PACKETS="packets"
DE _AVERAGE="average<br>load"
DE _MAXIMAL="maximal<br>load"
DE _BYTES="bytes"
DE _FLAGS="flags"

DE _TRAF_IN=" incoming traffic"
DE _TRAF_OUT=" outgoing traffic"
DE _FROM="from"
DE _TO="to"

DE _SINCE="since"
DE _TILL="till"

DE _DAY=date
DE _YYYY=YYYY
DE _MM=MM
DE _DD=DD

DE _hh=hh
DE _mm=mm
DE _ss=ss

DE _SHOW=show
DE _SHOW_PREV_10="show previous 10 minutes"
DE _SHOW_NEXT_10="show next 10 minutes"

# qos_in qos_out
QO _001="I N C O M I N G &nbsp; T R A F F I C"
QO _002="O U T G O I N G &nbsp; T R A F F I C"
# soq
QO _WYK="graphs" 
QO _UST="settings" 
QO _SZC="details" 
QO _STA="state"
QO _KOM="computer / class"
QO _IP="ip / class"
QO _MEN="menu" 
QO _WSK="load gauges"
QO _OBC="loads"
#QO _P1="average load / 1 sec."
QO _P10="average load / 10 sec."
QO _P60="average load / 60 sec."
QO _S1="maximal load / 1 sec."
QO _S10="maximal load / 10 sec."
QO _S60="maximal load / 60 sec."

* _CLASS=class
* _COMP=computer
* _ROUTER=router
* _WSZ="total" 
* _RAZ="total group" 

QO _NO_GROUP="no group"
QO _GROUPS="groups"



# qos_top
QT _001=global settings
QT _00R=router settings
QT _00D="black list"
QT _002="firewall details"
QT _003="qos details"
QT _004="list of services"
QT _005=password
QT _006=compact
QT _007="more lines visible"
QT _008=active
QT _009="show only active computers"
QT _010=pause
QT _011="refreshing is turned off"
QT _012="1 sec."
QT _013="refreshing every second"
QT _014="10 sec."
QT _015="refreshing every 10 seconds"
QT _016="60 sec."
QT _017="refreshing every 60 seconds"

QT _021="no licence key"
QT _022="corrupt licence key"
QT _023="wrong licence key"
QT _024="improper licence key"
QT _031="licence key expired"
QT _099="error"
QT _100="registered"
QT _101="licensed for"
QT _102="licence key valid till"
QT _103="licence key unlimited"
QT _104="try to register ?"
QT _105="serial number"
QT _106="evaluation licence key"

#QT _107="commercial licence"
#QT _108="free licence"

QT _110="http://en.coolsolutions.eu"
QT _111="home page"

QT _122="load another profile"
QT _123="save current profile"
QT _124="profiles scheduling"
QT _125="refreshing"
QT _126="updates"

QM _MIN="load graphs in separate window"

QO _REF=refresh
QO _PAU=pause
QO _OUT=outgoing
QO _IN=incoming

QO _ACT=active
QO _TIT_PAU="stop refreshing"
QO _TIT_ACT="show only active computers / classes"
QO _INT="refresh every x seconds"
QO _SEL_MICO="show in x columns"

QO _SE="sec."
QO _CO="col."


# qos_m
QM _001=settings
QM _002="computer selection"
QM _003="load graphs"
QM _004="packets logs"

QM _MRD="reports"

QM _XRD="more load graphs"

QM _000="load graphs live"


# rr*
RR _OST=last
RR _MIN=minutes
RR _POK_OST="show last"
RR _CAL_DZI="the whole day"
RR _INP_OUT="incoming / outgoing"
RR _OUT=outgoing
RR _INP=incoming
RR _REF=refresh
RR _PAU=pause
RR _CAL_MON="the whole month"
RR _CAL_DAY="a chosen day"
RR _PRE_DAY="previous day"
RR _NEX_DAY="next day"
RR _CAL_HOU="the whole hour"
RR _PRE_MON="previous month"
RR _NEX_MON="next month"

RR _PEE="maximal"
RR _AVE="average"
RR _LIM="limit"
RR _ALI="alive"
RR _TOT="total"

RR _REJ="registered"
RR _CLE="erase"


RR _LOAD_KBS="load in kBytes/sec"
RR _LOAD_IO="incoming / outgoing load"
RR _LOAD_IN="incoming  traffic load"
RR _LOAD_OUT="outgoing traffic load"

RR _LOAD_AVIN="average incoming"
RR _LOAD_AVOUT="average outgoing"

RR _PRI_MRD="monthly report"
RR _PRI_WRD="weekly report"
RR _PRI_DRD="daily report"
RR _PRI_HRD="hourly report"
RR _PRI_IRD="time report"

RR _PRINT="print"


# pass
PA _TITLE="Change password"
PA _NEW_PASS="new password of "
PA _NEW_PASS2="new password confirmed"
PA _BTN_SET=Set
PA _BTN_CANCEL=Cancel

PA _BTN_BACK=Back
PA _BTN_END=Finish

PA _PASS_2="new password not correctly confirmed"
PA _PASS_6="new password contents less then 6 signs"
PA _PASS_OK="new password was established - account "
PA _PASS_FAIL="failed to establish new password - account "



# save
SA _TITLE="Save current configuration as a profile"
SA _PROFILE="name of profile"
SA _PROFILES="saved profiles"
SA _BTN_SET=Save
SA _BTN_CANCEL=Cancel

SA _FORCE="Profile"
SA _FORCE2="aleady exists!"
SA _BTN_BACK=Back
SA _BTN_END=Finish
SA _BTN_FORCE="Overwrite" 
SA _SAVE_OK="Current configuration was saved as profile" 
SA _SAVE_OK2="." 
SA _SAVE_FAIL="Failed to save profile" 
SA _SAVE_FAIL2="!" 


# load
LO _TITLE="Load current configuration from saved profile"
LO _PROFILE="name of profile"
LO _PROFILES="saved profiles"
LO _BTN_SET=Load
LO _BTN_CANCEL=Cancel
LO _BTN_BACK=Back
LO _BTN_END=Finish

LO _EMPTY="Choose profile !"
LO _CONFIRM="Really load the profile "
LO _NOFILE=" not found !"

LO _LOAD_OK="Configuration loaded from the profile" 
LO _LOAD_OK2="." 
LO _LOAD_FAIL="Failed to load profile" 
LO _LOAD_FAIL2="!" 

LO _BTN_DELETE="Delete"
LO _DELETE="Really delete the profile "
LO _DEL_OK="Profile" 
LO _DEL_OK2="was deleted." 
LO _DEL_FAIL="Failed to delete profile" 
LO _DEL_FAIL2="!" 



# sche
SC _TITLE="Profiles scheduling"
SC _PROFILE="profile"
SC _PROFILES="schedule"
SC _BTN_SET="Save"
SC _BTN_CANCEL=Cancel
SC _BTN_SAVE="Save"

SC _SCH_PRO="When the chosen configurations saved as profiles are to be activated ?"  

SC _SCH_EDIT="simple editor"  
SC _SCH_INT=interpretation  

SC _PRO_NAM="profile name" 
SC _PRO_DOW="days of week" 

SC _PRO_TIM1="since hour" 
SC _PRO_TIM2="till hour" 

SC _PRO_DAT1="since date" 
SC _PRO_DAT2="till date" 


SC _BTN_ON="Turn on"
SC _BTN_OFF="turn off"
 
SC _AUTO="Profiles scheduling is"
SC _IS_ON="Turned on"
SC _IS_OFF="turned off"


SC _MO=Mo
SC _TU=Tu
SC _WE=We
SC _TH=Th
SC _FR=Fr
SC _SA=Sa
SC _SU=Su

SE _GRO_INT="interpretation"

SE _GRO_IP="IP"
SE _GRO_PORT="port"
SE _GRO_PROT="protocol"

SE _GRO_ANY="all"

SE _SET_RSY_DAILY="how often to check for updates ?"
SE _RSY_HOURLY="hourly"
SE _RSY_DAILY="daily"
SE _RSY_OFF="never"


RS _TITLE=Updates

RS _TIT_UPD="new updates are waiting for download and installation"
RS _TIT_OK="no new updates found"
RS _TIT_ERR="an error has occurred when checking for updates"

RS _BTN_BACK=Back
RS _BTN_END=Finish

RS _BTN_CHECK=Check
RS _BTN_UPDATE=Update
RS _BTN_CANCEL=Cancel

RS _RSYN_FAIL="operation failed !"
RS _RSYN_OK="downloading and installing of updates has been successfully initialized"
RS _CHECK_OK="checking for updates has been successfully initialized"

RS _CONFIRM="Really update ?"
RS _CONFIRM0="System seems to be up-to-date. Update anyway ?"


