How to compile the MudMagic source code on windows platform:
I use just a standard MSDOS prompt under windows to compile
this (not Cygwin or the GUI that comes with Dev-CPP. These
steps detail using MSDOS prompt

Pay close attention to where I install the needed libraries.
You can adjust these values based on your install within the
Makefile.win file.
===========================================================

PHASE 1 - prepare the environment

    * step 1 - DEV-CPP
        - URL: http://www.bloodshed.net/dev/devcpp.html
        - install it in c:\devcpp
        - add $DEVCPP_PATH/bin in PATH  (in my case
          PATH=c:\devcpp\bin;%PATH%a   )

    * step 2 - PYTHON
        - URL: http://www.python.org/ftp/python/2.3.4/Python-2.3.4.exe
        - install it  c:\python

    * step 3 - GTK+ development environment
	       This step sets up the environment for compiling the mud client in DOS. The next step (step 4)
	       sets up the environment for creating the installer program to install the mudmagic client. (don't
	       confuse these two steps and their purposes =)

	       *Download the following files. Extract all these files to: c:\GTK . This will be the header library
		used to compiled the mud client.

		-URL: ftp://ftp.gtk.org/pub/gtk/v2.8/win32/gtk+-dev-2.8.6.zip
		-URL: ftp://ftp.gtk.org/pub/gtk/v2.8/win32/pango-dev-1.10.1.zip
	        -URL: ftp://ftp.gtk.org/pub/gtk/v2.8/win32/glib-dev-2.8.3.zip
		-URL: ftp://ftp.gtk.org/pub/gtk/v2.8/win32/cairo-dev-1.0.2.zip
		-URL: ftp://ftp.gtk.org/pub/gtk/v2.8/win32/atk-dev-1.10.3.zip
		-URL: http://prdownloads.sourceforge.net/gladewin32/libglade-2.4.0-dev.zip
		-URL: http://www.gimp.org/~tml/gimp/win32/gettext-dev-0.14.5.zip

	       *Bundled packages - The following packages contain both developmental headers for step 3, and
		precompiled libs for step 4. In this part, just extract the contents in a seperate folder and copy/paste
 		everything to your c:\GTK folder. (leave extracted folder for portions of step 4 if needed)
		
		libiconv:
			http://www.gimp.org/~tml/gimp/win32/libiconv-1.9.1.bin.woe32.zip
		
   *  step 4 - Prepare the gtk-runtime-installer. This uses GAIM's and GIMP's aproach at handling
	       registry usage on 98, 2k, xp, and NT platforms. Neither of these distro's are currently
	       using a 2.8.6 version though - so this installer was created. Normally I just use GAIM's
               gtk-runtime.exe installer they distro with their program.

	       NOTE: This is put here for development education purposes. Only the person responsible for
		     the initial release of the mud client (Kyndig) has to perform these steps. All other
		     users can download the completed gtk-runtime.exe file, along with the current NSI
		     system for creating the 'setup' process of the mud client from the CVS client_installer
		     located at cvs.mudmagic.com . Only use this step if you require an updated gtk+ version.

	
		
       		* Retrieve gaim's gtk_installer and extract it to c:\ (as of this writing, 2.6.9 was the
		 latest gaim gtk-installer ..we need one for version 2.8.6, so well use this one as a template )
		
		-URL: http://prdownloads.sourceforge.net/gaim/gtk-2.6.9-rev-a-installer.tar.gz
			*GO INTO gtk_installer/gtk_install_files and DELETE EVERYTHING (select all-delete)

		* go into the libiconv folder you left from step-3 and copy the bin/ to the gtk_installer/gtk_install_files
 		  directory

	       * Retrieve the following libs and extract them all under the previous gtk_installer/gtk_install_files
		 rather than recompiling all this above. Download the appropriate dll files that correspond
	 	 to the above versions and drop them into the directory whose content we just deleted. This runtime
		 also includes glade dll since we need it for the mud client. (DO NOT USE gladewin32 site! it does
		 not follow the gaim/gimp registry and will break those installs as well as the mudmagic install)

		-URL: ftp://ftp.gtk.org/pub/gtk/v2.8/win32/gtk+-2.8.6.zip
		-URL: ftp://ftp.gtk.org/pub/gtk/v2.8/win32/pango-1.10.1.zip
		-URL: ftp://ftp.gtk.org/pub/gtk/v2.8/win32/glib-2.8.3.zip
		-URL: ftp://ftp.gtk.org/pub/gtk/v2.8/win32/atk-1.10.3.zip
		-URL: ftp://ftp.gtk.org/pub/gtk/v2.8/win32/cairo-1.0.2.zip
		-URL: http://prdownloads.sourceforge.net/gladewin32/libglade-2.4.0-bin.zip
		-URL: http://www.gimp.org/~tml/gimp/win32/gettext-0.14.5.zip

	      * The following files are not required to compile the mud client, but the dll's are required to operate
		certain things in GTK. download and copy these dll's to the gtk_install_files/bin directory:
		-URL: http://prdownloads.sourceforge.net/gnuwin32/libpng-1.2.8-bin.zip?download

	      * The following files are not distributed by default with gaim or gimp, and are not need to compile the
		mud client, but _are_ needed for certain functionality of the client. These files should be placed in
		the mud clients: windows-installer/installs file as their extracted dll parts:
		-URL: http://www.zlib.net/zlib123-dll.zip

		
		* Edit gtk-installer.nsi script. Near the top add:
			;Configuration
			!define GTK_VERSION "2.8.6"
			!define GTK_REVISION "a"

		* Drag-n-Drop the gtk-installer.nsi file to your NSIS Compiler window to create gtk-runtime.exe installer.
		* Move this executable to the mudmagic contrib/windows-installer/gtk_installer  directory
		* gaim & gimp don't use glade, so just to be safe for future updates, copy the libglade-2.0.0.dll file
		  to mudmagics gtk_install directory (the nsi script is already setup to install it)

PHASE 2 - build 
		- untar mudmagic-1.7.tar.gz
		- go into each one of the mudmagic-1.7/bundled directories and
		  compile the DLL if you wish to. You can use the pre-compiled
		  DLL's though that come with the client. Read the win32/Makefile.win
		  in the appropriate bundled library to compile the dll
		- cd in mudmagic-1.7/src/main
		- edit mudmagic-1.7/src/main/Makefile.win to point to your: python/ devextra/ and devcpp/ directories
		- make -f Makefile.win
		- copy the mudmagic.exe in mudmagic-1.7/contrib/windows-installer/installs directory
				
PHASE 3 - build the new setup program
		- cd in mudmagic-1.7/contrib/windows-installer
		- run mudmagic.nsi script to produce a new Setup1.7.exe file

~                            
script to produce a new mudmagic-1.7.exe file

~                            
