#!/bin/bash

#
# Copyright (c) 2006 Mellanox Technologies. All rights reserved.
#
# This Software is licensed under one of the following licenses:
#
# 1) under the terms of the "Common Public License 1.0" a copy of which is
#    available from the Open Source Initiative, see
#    http://www.opensource.org/licenses/cpl.php.
#
# 2) under the terms of the "The BSD License" a copy of which is
#    available from the Open Source Initiative, see
#    http://www.opensource.org/licenses/bsd-license.php.
#
# 3) under the terms of the "GNU General Public License (GPL) Version 2" a
#    copy of which is available from the Open Source Initiative, see
#    http://www.opensource.org/licenses/gpl-license.php.
#
# Licensee has the right to choose one of the above licenses.
#
# Redistributions of source code must retain the above copyright
# notice and one of the license notices.
#
# Redistributions in binary form must reproduce both the above copyright
# notice, one of the license notices in the documentation
# and/or other materials provided with the distribution.
#
#
#  $Id: openibd 7984 2006-06-14 06:37:50Z vlad $
#

# config: /etc/infiniband/openib.conf
CONFIG="/etc/infiniband/openib.conf"

if [ ! -f $CONFIG ]; then
    echo No InfiniBand configuration found
    exit 0
fi

. $CONFIG

CWD=`pwd`
cd /etc/infiniband
WD=`pwd`

PATH=$PATH:/sbin:/usr/bin

# Only use ONBOOT option if called by a runlevel directory.
# Therefore determine the base, follow a runlevel link name ...
base=${0##*/}
link=${base#*[SK][0-9][0-9]}
# ... and compare them
if [ $link == $base ] ; then
    RUNMODE=manual
    ONBOOT=yes
else
    RUNMODE=auto    
fi
            
ACTION=$1
shift
RESTART=0

# Check if OpenIB configured to start automatically
if [ "X${ONBOOT}" != "Xyes" ]; then
    exit 0
fi

#	# Check that HCA driver was installed for current kernel
#	INFO=/etc/infiniband/info
#	if [ -x ${INFO} ]; then
#		info_kversion=$(${INFO} | grep -w Kernel | cut -d '=' -f 2)
#	        if [ "X$(uname -r)" != "X${info_kversion}" ]; then
#	                # OpenIB stack was installed for different from current kernel
#			echo
#	                echo "ERROR: The OpenIB stack was installed for kernel ${info_kversion}, while current kernel is $(uname -r)."
#			echo
#	                exit 1
#	        fi
#	fi

if ( grep -i 'SuSE Linux' /etc/issue >/dev/null 2>&1 ); then 
    if [ -n "$INIT_VERSION" ] ; then
        # MODE=onboot
	    if LANG=C egrep -L "^ONBOOT=['\"]?[Nn][Oo]['\"]?" ${CONFIG} > /dev/null ; then
		    exit 0
	    fi
    fi
fi

#########################################################################
# Get a sane screen width
[ -z "${COLUMNS:-}" ] && COLUMNS=80

[ -z "${CONSOLETYPE:-}" ] && [ -x /sbin/consoletype ] && CONSOLETYPE="`/sbin/consoletype`"

if [ -f /etc/sysconfig/i18n -a -z "${NOLOCALE:-}" ] ; then
  . /etc/sysconfig/i18n
  if [ "$CONSOLETYPE" != "pty" ]; then
        case "${LANG:-}" in
                ja_JP*|ko_KR*|zh_CN*|zh_TW*)
                        export LC_MESSAGES=en_US
                        ;;
                *)
                        export LANG
                        ;;
        esac
  else
        export LANG
  fi
fi

# Read in our configuration
if [ -z "${BOOTUP:-}" ]; then
  if [ -f /etc/sysconfig/init ]; then
      . /etc/sysconfig/init
  else
    # This all seem confusing? Look in /etc/sysconfig/init,
    # or in /usr/doc/initscripts-*/sysconfig.txt
    BOOTUP=color
    RES_COL=60
    MOVE_TO_COL="echo -en \\033[${RES_COL}G"
    SETCOLOR_SUCCESS="echo -en \\033[1;32m"
    SETCOLOR_FAILURE="echo -en \\033[1;31m"
    SETCOLOR_WARNING="echo -en \\033[1;33m"
    SETCOLOR_NORMAL="echo -en \\033[0;39m"
    LOGLEVEL=1
  fi
  if [ "$CONSOLETYPE" = "serial" ]; then
      BOOTUP=serial
      MOVE_TO_COL=
      SETCOLOR_SUCCESS=
      SETCOLOR_FAILURE=
      SETCOLOR_WARNING=
      SETCOLOR_NORMAL=
  fi
fi

if [ "${BOOTUP:-}" != "verbose" ]; then
   INITLOG_ARGS="-q"
else
   INITLOG_ARGS=
fi

echo_success() {
  echo -n $@
  [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
  echo -n "[  "
  [ "$BOOTUP" = "color" ] && $SETCOLOR_SUCCESS
  echo -n $"OK"
  [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
  echo -n "  ]"
  echo -e "\r"
  return 0
}

echo_done() {
  echo -n $@
  [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
  echo -n "[  "
  [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
  echo -n $"done"
  [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
  echo -n "  ]"
  echo -e "\r"
  return 0
}

echo_failure() {
  echo -n $@
  [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
  echo -n "["
  [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
  echo -n $"FAILED" 
  [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
  echo -n "]"
  echo -e "\r"
  return 1
}

count_ib_ports()
{
    local cnt=0
    
    sysdir=/sys/class/infiniband
    hcas=$(/bin/ls -1 ${sysdir})
    for hca in $hcas
    do
        cnt=$[ $cnt + $(/bin/ls -1 ${sysdir}/${hca}/ports | wc -l) ]
    done
   
    return $cnt
}

# Setting Environment variables
IS_FEDORA=0
if [ -f /etc/redhat-release ]; then
    DISTRIB="RedHat"
    NETWORK_CONF_DIR="/etc/sysconfig/network-scripts"
    # Check for Fedora, CentOS or Red Hat Enterprise Linux AS release 4 distribution
    if ( grep -wE "Fedora|Nahant|CentOS" /etc/redhat-release > /dev/null ); then
        IS_FEDORA=1
    fi
elif [ -f /etc/rocks-release ]; then
    DISTRIB="Rocks"
    NETWORK_CONF_DIR="/etc/sysconfig/network-scripts"
elif [ -f /etc/SuSE-release ]; then
    DISTRIB="SuSE"
    NETWORK_CONF_DIR="/etc/sysconfig/network"
else
    DISTRIB=`ls /etc/*-release | head -n 1 | xargs -iXXX basename XXX -release 2> /dev/null`
    if [ -d /etc/sysconfig/network-scripts ]; then
        NETWORK_CONF_DIR="/etc/sysconfig/network-scripts"
    elif [ -d /etc/sysconfig/network ]; then
        NETWORK_CONF_DIR="/etc/sysconfig/network"
    else
        echo_failure "You system is not supported for IPoIB configuration"
        echo "Try to load driver manually using configuration files from $WD directory"
        exit 1
    fi
fi

# Define kernel version prefix
KPREFIX=`uname -r | cut -c -3 | tr -d '.' | tr -d '[:space:]'`

# Setting OpenIB start parameters
POST_LOAD_MODULES=""

if [ "X${SDP_LOAD}" == "Xyes" ]; then
    POST_LOAD_MODULES="$POST_LOAD_MODULES ib_sdp"
    IPOIB_LOAD="yes"
fi    

IPOIB=0
if [ "X${IPOIB_LOAD}" == "Xyes" ]; then
    IPOIB=1
fi

if [ "X${SRP_LOAD}" == "Xyes" ]; then
    POST_LOAD_MODULES="$POST_LOAD_MODULES ib_srp"
fi    

if [ "X${SRP_TARGET_LOAD}" == "Xyes" ]; then
    POST_LOAD_MODULES="$POST_LOAD_MODULES ib_srp_target"
fi    

if [ "X${RDMA_CM_LOAD}" == "Xyes" ]; then
    POST_LOAD_MODULES="$POST_LOAD_MODULES rdma_cm"
fi    

if [ "X${UCM_LOAD}" == "Xyes" ]; then
    POST_LOAD_MODULES="$POST_LOAD_MODULES ib_ucm"
fi    

if [ "X${RDS_LOAD}" == "Xyes" ]; then
    POST_LOAD_MODULES="$POST_LOAD_MODULES ib_rds"
fi    

if [ "X${ISER_LOAD}" == "Xyes" ]; then
    POST_LOAD_MODULES="$POST_LOAD_MODULES ib_iser"
fi    

if [ "X${RDMA_UCM_LOAD}" == "Xyes" ]; then
    POST_LOAD_MODULES="$POST_LOAD_MODULES rdma_ucm"
fi    

GEN1_UNLOAD_MODULES="ib_srp_target scsi_target ib_srp kdapltest_module ib_kdapl ib_sdp ib_useraccess ib_useraccess_cm ib_cm ib_dapl_srv ib_ip2pr ib_ipoib ib_tavor mod_thh mod_rhh ib_dm_client ib_sa_client ib_client_query ib_poll ib_mad ib_core ib_services"

PRE_UNLOAD_MODULES="ib_rds ib_ucm kdapl ib_srp_target scsi_target ib_srp ib_iser ib_sdp rdma_ucm rdma_cm ib_addr ib_cm ib_local_sa findex"

# W/A for unloading modules
POST_UNLOAD_MODULES="$PRE_UNLOAD_MODULES ib_ipoib ib_sa ib_uverbs ib_umad ib_mthca ib_ipath ipath_core ib_mad ib_core"

STATUS_MODULES="rdma_ucm ib_rds ib_srp ib_sdp rdma_cm ib_addr ib_local_sa findex ib_ipoib ib_ipath ipath_core ib_mthca ib_uverbs ib_umad ib_ucm ib_sa ib_cm ib_mad ib_core"


get_interfaces()
{
    count_ib_ports
    ports_num=$?
                       
    interfaces=""
    for (( i=0 ; i < $ports_num ; i++ ))
    do
        interfaces="$interfaces ib${i}"
    done    
}

# If module $1 is loaded return - 0 else - 1
is_module()
{
local RC

    /sbin/lsmod | grep -w "$1" > /dev/null 2>&1
    RC=$?
    
return $RC        
}

get_sw_fw_info()
{
    INFO=/etc/infiniband/info
    OFEDHOME="/usr/local"
    if [ -x ${INFO} ]; then
        OFEDHOME=$(${INFO} | grep -w prefix | cut -d '=' -f 2)
    fi
    MREAD=$(which mread 2> /dev/null)
    
    # Get OFED Build id
    if [ -r ${OFEDHOME}/BUILD_ID ]; then
        echo  "Software"
        echo  "-------------------------------------"
        printf "Build ID:\n"
        cat ${OFEDHOME}/BUILD_ID
        echo  "-------------------------------------"
    fi    

    # Get FW version
    if [ ! -x ${MREAD} ]; then
        return 1
    fi

    vendor="15b3"
    slots=$(lspci -n -d "${vendor}:" 2> /dev/null | grep -v "5a46" | cut -d ' ' -f 1)
    for mst_device in $slots
    do
        major=$($MREAD ${mst_device} 0x82478 2> /dev/null | cut -d ':' -f 2)
        subminor__minor=$($MREAD ${mst_device} 0x8247c 2> /dev/null | cut -d ':' -f 2)
        ftime=$($MREAD ${mst_device} 0x82480 2> /dev/null | cut -d ':' -f 2)
        fdate=$($MREAD ${mst_device} 0x82484 2> /dev/null | cut -d ':' -f 2)

        major=$(echo -n $major | cut -d x -f 2 | cut -b 4)
        subminor__minor1=$(echo -n $subminor__minor | cut -d x -f 2 | cut -b 3,4)
        subminor__minor2=$(echo -n $subminor__minor | cut -d x -f 2 | cut -b 5,6,7,8)
        echo
        echo "Device ${mst_device} Info:"
        echo "Firmware:"

        printf "\tVersion:"
        printf "\t$major.$subminor__minor1.$subminor__minor2\n"

        day=$(echo -n $fdate | cut -d x -f 2 | cut -b 7,8)
        month=$(echo -n $fdate | cut -d x -f 2 | cut -b 5,6)
        year=$(echo -n $fdate | cut -d x -f 2 | cut -b 1,2,3,4)
        hour=$(echo -n $ftime | cut -d x -f 2 | cut -b 5,6)
        min=$(echo -n $ftime | cut -d x -f 2 | cut -b 3,4)
        sec=$(echo -n $ftime | cut -d x -f 2 | cut -b 1,2)
        
        printf "\tDate:"
        printf "\t$day/$month/$year $hour:$min:$sec\n"
    done
}

# Create debug info
get_debug_info()
{
    trap '' 2 9 15
    DEBUG_INFO=/tmp/ib_debug_info.log
    /bin/rm -f $DEBUG_INFO
    touch $DEBUG_INFO
    echo "Hostname: `hostname -s`" >> $DEBUG_INFO
    test -e /etc/issue && echo "OS: `cat /etc/issue`" >> $DEBUG_INFO
    echo "Current kernel: `uname -r`" >> $DEBUG_INFO
    echo "Architecture: `uname -m`" >> $DEBUG_INFO
    echo "GCC version: `gcc --version`"  >> $DEBUG_INFO
    echo "CPU: `cat /proc/cpuinfo | /bin/grep -E \"model name|arch\" | head -1`" >> $DEBUG_INFO
    echo "`cat /proc/meminfo | /bin/grep \"MemTotal\"`" >> $DEBUG_INFO
    echo "Chipset: `/sbin/lspci 2> /dev/null | head -1 | cut -d ':' -f 2-`" >> $DEBUG_INFO

    echo >> $DEBUG_INFO
    get_sw_fw_info >> $DEBUG_INFO
    echo >> $DEBUG_INFO

    echo >> $DEBUG_INFO
    echo "############# LSPCI ##############" >> $DEBUG_INFO
    /sbin/lspci 2> /dev/null >> $DEBUG_INFO
    
    echo >> $DEBUG_INFO
    echo "############# LSPCI -N ##############" >> $DEBUG_INFO
    /sbin/lspci -n 2> /dev/null >> $DEBUG_INFO

    echo >> $DEBUG_INFO
    echo "############# LSMOD ##############" >> $DEBUG_INFO
    /sbin/lsmod >> $DEBUG_INFO
    
    echo >> $DEBUG_INFO
    echo "############# DMESG ##############" >> $DEBUG_INFO                                                            
    /bin/dmesg >> $DEBUG_INFO

    echo >> $DEBUG_INFO
    echo "############# Messages ##############" >> $DEBUG_INFO
    tail -50 /var/log/messages >> $DEBUG_INFO

    echo >> $DEBUG_INFO
    echo "############# Running Processes ##############" >> $DEBUG_INFO
    /bin/ps -ef >> $DEBUG_INFO
    echo "##############################################" >> $DEBUG_INFO

    echo
    echo "Please open an issue in the http://openib.org/bugzilla and attach $DEBUG_INFO"
    echo
}

errata_58()
{
# Check AMD chipset issue Errata #58
if test -x /sbin/lspci && test -x /sbin/setpci; then
     if ( /sbin/lspci -nd 1022:1100 2> /dev/null | grep "1100" > /dev/null ) &&
        ( /sbin/lspci -nd 1022:7450 2> /dev/null | grep "7450" > /dev/null ) &&
        ( /sbin/lspci -nd 15b3:5a46 2> /dev/null | grep "5a46" > /dev/null ); then

        if ! ( grep FIX_AMD_8131_ERR58 $CONFIG > /dev/null ); then
            echo >> $CONFIG
            echo "# Set FIX_AMD_8131_ERR58=YES to apply AMD-8131 Errata #58 workaround" >> $CONFIG
            echo "FIX_AMD_8131_ERR58=\"YES\"" >> $CONFIG
        fi
	
	# Set default value for FIX_AMD_8131_ERR58
	if [ -z "$FIX_AMD_8131_ERR58" ]; then
		FIX_AMD_8131_ERR58="YES"
	fi
        
        CURVAL=`/sbin/setpci -d 1022:1100 69`

        for val in $CURVAL
        do
            if [ "${val}" != "c0" ]; then
                if [ "$FIX_AMD_8131_ERR58" == "YES" ]; then
                    /sbin/setpci -d 1022:1100 69=c0
                    if [ $? -eq 0 ]; then
                        # echo "AMD-8131 Errata #58 workaround applied"
                        break
                    else
                        echo "Failed to apply AMD-8131 Errata #58 workaround"
                    fi
                else
                    echo
                    echo "Invalid configuration found for PCI-X chipset AMD-8131 (Errata #58)"
                    echo "For more details see IBG2 Distribution Release Notes (IBG2_Release_Notes.pdf under docs directory)"
                    echo
                    if [ "$RUNMODE" == "manual" ]; then
                        read -p "Do you wish to continue anyway? [y/N]:"
                        if [[ "$REPLY" != "y" && "$REPLY" != "yes" ]]; then
                            exit 1
                        fi
                        break
                    else
                        exit 1
                    fi
                fi
            fi
        done
    
    fi
fi

}

errata_56()
{
# Check AMD chipset issue Errata #56
if test -x /sbin/lspci && test -x /sbin/setpci; then
     if ( /sbin/lspci -nd 1022:1100 2> /dev/null | grep "1100" > /dev/null ) &&
        ( /sbin/lspci -nd 1022:7450 2> /dev/null | grep "7450" > /dev/null ) &&
	( /sbin/lspci -nd 15b3:5a46 2> /dev/null | grep "5a46" > /dev/null ); then

        if ! ( grep FIX_AMD_8131_ERR56 $CONFIG > /dev/null ); then
            echo >> $CONFIG
            echo "# Set FIX_AMD_8131_ERR56=YES to apply AMD-8131 Errata #56 workaround" >> $CONFIG
            echo "FIX_AMD_8131_ERR56=\"YES\"" >> $CONFIG
        fi

        # Set default value for FIX_AMD_8131_ERR56
        if [ -z "$FIX_AMD_8131_ERR56" ]; then
                FIX_AMD_8131_ERR56="YES"
        fi

	bus=""

	# Look for devices AMD-8131
	for amd_dev in `/sbin/setpci -v -f -d 1022:7450 19 | cut -d':' -f1,2`
	do

		bus=`/sbin/setpci -s $amd_dev 19`
		rev=`/sbin/setpci -s $amd_dev 8`


		# Look for Tavor attach to secondary bus of this devices
		for device in `/sbin/setpci -f -s $bus: -d 15b3:5a46 19`
		do
			if [ $rev -lt 13 ]; then
				if [ "$FIX_AMD_8131_ERR56" == "YES" ]; then			
					/sbin/setpci -d 15b3:5a44 72=14
					if [ $? -eq 0 ]; then
		                        	# echo "AMD-8131 Errata #56 workaround applied"
			                        break
			                else
                        			echo "Failed to apply AMD-8131 Errata #56 workaround"
			                fi
                		else
		                	echo
			                echo "Invalid configuration found for PCI-X chipset AMD-8131 (Errata #56)"
                    			echo "For more details see IBG2 Distribution Release Notes (IBG2_Release_Notes.pdf under docs directory)"
                    			echo

		                    	if [ "$RUNMODE" == "manual" ]; then
			                       	read -p "Do you wish to continue anyway? [y/N]:"
                			        if [[ "$REPLY" != "y" && "$REPLY" != "yes" ]]; then
		        	                    exit 1
			                        fi
		                        	break
		               	    	else
		        	                exit 1
		                    	fi
				fi

			else
				continue
			fi

			# If more than one device is on the bus the issue a
			# warning
			num=`/sbin/setpci -f -s $bus: 0 | wc -l |  sed 's/\ *//g'`

			if [ $num -gt 1 ]; then
				echo "Warning: your current PCI-X configuration might be incorrect."
				echo "see AMD-8131 Errata 56 for more details."
			fi

		done
	done

     fi
fi
}

start()
{
    local RC=0
   
    # Stop Gen1 modules if they are UP after uninstall
    if is_module ib_tavor; then
	echo
	echo "Found Infiniband Gen1 modules."
	echo "Trying to unload them first..."
	echo
	stop_gen1
    fi
    
    errata_58
    
    # Load Mellanox HCA driver

    if [ "X${MTHCA_LOAD}" == "Xyes" ]; then
    	/sbin/modprobe ib_mthca > /dev/null 2>&1
    	RC=$[ $RC + $? ]
    fi

    if [ "X${IPATH_LOAD}" == "Xyes" ]; then
    	/sbin/modprobe ib_ipath > /dev/null 2>&1
    	RC=$[ $RC + $? ]
    fi

    # Add node description to sysfs
    IBSYSDIR="/sys/class/infiniband"
    if [ -d ${IBSYSDIR} ]; then
        declare -i hca_id=1
        for hca in ${IBSYSDIR}/*
        do
	    if [ -e ${hca}/node_desc ]; then
            	echo -n "$(hostname -s) HCA-${hca_id}" >> ${hca}/node_desc
	    fi
            let hca_id++
        done
    fi
    
    /sbin/modprobe ib_umad > /dev/null 2>&1
    RC=$[ $RC + $? ]
    /sbin/modprobe ib_uverbs > /dev/null 2>&1
    RC=$[ $RC + $? ]
    
    if [ $IPOIB -eq 1 ]; then
	/sbin/modprobe ib_ipoib > /dev/null 2>&1
	RC=$[ $RC + $? ]
    fi

    if [ $RC -eq 0 ]; then
        echo_success $"Loading HCA driver and Access Layer: "
    else    
        echo_failure $"Loading HCA driver and Access Layer: "
        get_debug_info
        exit 1
    fi    
    
    # Create devices using udev
    if [ -x /sbin/udevstart ]; then
	    /sbin/udevstart > /dev/null 2>&1
	    if [ $? -ne 0 ]; then
		echo_failure $"udevstart: Failed to create devices"
		exit 2
	    fi
    fi

    # Enable IPoIB Interface if configured
    if [ $IPOIB -eq 1 ]; then
        get_interfaces
        echo Setting up InfiniBand network interfaces:
        for i in $interfaces
        do
      	    	if [[ ! -e ${WD}/ifcfg-${i} && ! -e ${NETWORK_CONF_DIR}/ifcfg-${i} ]]; then
			echo "No configuration found for ${i}"	
                	continue
            	fi

		REMOVE_NETWORK_CONF=0
		if [ ! -e ${NETWORK_CONF_DIR}/ifcfg-${i} ]; then
	    		ln -snf ${WD}/ifcfg-${i} ${NETWORK_CONF_DIR}/ifcfg-${i}
			REMOVE_NETWORK_CONF=1
		fi
	
	        if [ "$RUNMODE" != "manual" ]; then
	            case $DISTRIB in
	                RedHat|Rocks)
	                    if LANG=C egrep -L "^ONBOOT=['\"]?[Nn][Oo]['\"]?" ${NETWORK_CONF_DIR}/ifcfg-$i > /dev/null ; then
	                        continue
	                    fi
	                ;;    
	                SuSE)
	                    if ! LANG=C egrep -L "^STARTMODE=['\"]?onboot['\"]?" ${NETWORK_CONF_DIR}/ifcfg-$i > /dev/null ; then
	                        continue
	                    fi
	                ;;
	                *)
	                    if LANG=C egrep -L "^ONBOOT=['\"]?[Nn][Oo]['\"]?" ${NETWORK_CONF_DIR}/ifcfg-$i > /dev/null ; then
	                        continue
	                    fi
	                ;;    
	            esac    
	        fi
	
	    #        echo $"Bringing up interface $i:"
	
	    	case $DISTRIB in
	    		RedHat|Rocks)
	    		    if [ $IS_FEDORA -eq 0 ]; then	
	            		    /sbin/ifup ${i}
	    		    else
	    			    . ${NETWORK_CONF_DIR}/ifcfg-${i}
                        if [ ! -z ${IPADDR} ] && [ ! -z ${NETMASK} ] && [ ! -z ${BROADCAST} ]; then
                            /sbin/ifconfig ${i} ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST} > /dev/null 2>&1
                        else
	            		    /sbin/ifup ${i}
                        fi
	    		    fi
	    		;;
	    		SuSE)
	                    if [ "$KPREFIX" == "26" ]; then
	                    	ifconfig ${i} up > /dev/null 2>&1
	                    fi    
			            # Workaround for ifup issue: two devices with the same IP address
	    		        . ${NETWORK_CONF_DIR}/ifcfg-${i}
                        if [ ! -z ${IPADDR} ] && [ ! -z ${NETMASK} ] && [ ! -z ${BROADCAST} ]; then
                            /sbin/ifconfig ${i} ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST} > /dev/null 2>&1
                        else
	            		    /sbin/ifup ${i}
                        fi
	             	    # /sbin/ifup ${i} > /dev/null 2>&1
	    		;;
	    		*)
	            	    /sbin/ifup ${i}
	    		;;
	    	esac 
	        RC=$?
	
            unset IPADDR NETMASK BROADCAST

		if [ $REMOVE_NETWORK_CONF -eq 1 ]; then
	            rm -f ${NETWORK_CONF_DIR}/ifcfg-${i}
		fi
            
            	if [ $RC -eq 0 ]; then 
                	echo_success $"Bringing up interface $i:"
            	else
                	echo_failure $"Bringing up interface $i:"
                	# get_debug_info
                	exit 1
            	fi
        done    
        echo_done "Setting up service network   .   .   ."
        
    fi    
    
    # Load configured modules
    if [ "$POST_LOAD_MODULES" != "" ]; then
        for mod in  $POST_LOAD_MODULES
        do
	   	case $mod in
			ib_iser)
				# Voltaire requirement
            			/sbin/modprobe --force-modversion $mod > /dev/null 2>&1
			;;
			*)
            			/sbin/modprobe $mod > /dev/null 2>&1
			;;
		esac
            	RC=$?
            	[ $RC -ne 0 ] && echo_failure "Failed to load $mod"
        done    
    fi
    
    errata_56
    sleep 1    
    return $RC    
}

unload()
{
	# Unload module $1
	if is_module $mod; then
            	/sbin/modprobe -r $mod > /dev/null 2>&1
            	if [ $? -ne 0 ]; then
			# Try rmmod if modprobe failed: case that previous installation included more IB modules.
			/sbin/rmmod $mod > /dev/null 2>&1
                    	if [ $? -ne 0 ]; then
                    	    echo_failure $"Failed to unload $mod"
    			    get_debug_info
			    [ ! -z $2 ] && echo $2
                    	    exit 1
                    	fi    
		fi
	fi

}

stop_gen1()
{
    if is_module ib_ipoib; then
        # Unload IPoIB interfaces
        get_interfaces
       	for i in $interfaces
           	do
        			if [[ ! -e ${WD}/ifcfg-${i} && ! -e ${NETWORK_CONF_DIR}/ifcfg-${i} ]]; then
    			# echo "No configuration found for ${i}"	
    			continue
         		fi
    
    		REMOVE_NETWORK_CONF=0
    		if [ ! -e ${NETWORK_CONF_DIR}/ifcfg-${i} ]; then
    				ln -snf ${WD}/ifcfg-${i} ${NETWORK_CONF_DIR}/ifcfg-${i}
    			REMOVE_NETWORK_CONF=1
    		fi
    
            		ifdown ${i} > /dev/null 2>&1
    		RC=$(($RC+$?))
    		[ $RC -eq 0 ] && echo_success $"Shutting down interface $i: " || echo_failure $"Shutting down interface $i: "
    		if [ $REMOVE_NETWORK_CONF -eq 1 ]; then
    			rm -f ${NETWORK_CONF_DIR}/ifcfg-${i}
    		fi
       	done
    
       	[ $RC -ne 0 ] && echo "Please reboot the host." &&  exit 1
       	sleep 2
    fi


    if [ "${GEN1_UNLOAD_MODULES}" != "" ]; then
        for mod in  ${GEN1_UNLOAD_MODULES}
        do
            unload $mod "Please reboot the host."
        done
    fi
}

stop()
{
    local RC=0
    
        # Check if applications which use infiniband are running
        local apps="opensm osmtest ibbs ibns"
        local pid
        
        for app in $apps
        do
    	if ( ps -ef | grep $app | grep -v grep > /dev/null 2>&1 ); then
                echo
                echo "Please stop $app and all applications running over InfiniBand"
                echo "Then run \"$0 $ACTION\""
                echo
                exit 1
            fi
        done

	# Stop Gen1 modules if they are UP after uninstall
        if is_module ib_tavor; then
		stop_gen1
 	        if [ $RESTART -eq 0 ]; then
			exit 0
		else
			return 0
		fi
       fi
    
        if ! is_module ib_core; then
            if [ $RESTART -eq 0 ]; then
            	echo
            	echo_failure $"HCA driver is not loaded or loaded with errors"
            	echo
            	exit 1
            else
                    return 0
            fi                        
        fi

        # Unload ULPs modules

        if [ "$PRE_UNLOAD_MODULES" != "" ]; then
                for mod in  $PRE_UNLOAD_MODULES
                do
			unload $mod
                done
        fi

        # Remove srp_presistant_bind.sh before removeing ib_srp module
        PID_SCRPT_TO_KILL=`ps -efww | grep srp_persistent | grep -v grep | awk '{print $2}'`
        if ! [ "$PID_SCRPT_TO_KILL" == "" ]; then
              PID_SLEEP_TO_KILL=`ps -efww | grep $PID_SCRPT_TO_KILL | grep sleep | awk '{print $2}'`
              kill -9 $PID_SCRPT_TO_KILL
        fi
        if ! [ "$PID_SLEEP_TO_KILL" == "" ]; then
              kill -9 $PID_SLEEP_TO_KILL
        fi
    
        
        # Unload IPoIB interfaces
    if is_module ib_ipoib; then
        get_interfaces
        for i in $interfaces
        do
      	    if [[ ! -e ${WD}/ifcfg-${i} && ! -e ${NETWORK_CONF_DIR}/ifcfg-${i} ]]; then
		# echo "No configuration found for ${i}"	
                continue
            fi
	    REMOVE_NETWORK_CONF=0
	    if [ ! -e ${NETWORK_CONF_DIR}/ifcfg-${i} ]; then
	    	ln -snf ${WD}/ifcfg-${i} ${NETWORK_CONF_DIR}/ifcfg-${i}
		REMOVE_NETWORK_CONF=1
	    fi
            ifdown ${i} > /dev/null 2>&1
            RC=$(($RC+$?))
            [ $RC -eq 0 ] && echo_success $"Shutting down interface $i: " || echo_failure $"Shutting down interface $i: "
	    if [ $REMOVE_NETWORK_CONF -eq 1 ]; then
	    	rm -f ${NETWORK_CONF_DIR}/ifcfg-${i}
	    fi
        done    
    
        [ $RC -ne 0 ] && get_debug_info && exit 1
	sleep 2
    fi
        
        # Unload OpenIB modules
        
        if [ "$POST_UNLOAD_MODULES" != "" ]; then
                for mod in  $POST_UNLOAD_MODULES
                do
			unload $mod
                done
       fi

       	echo_success $"Unloading HCA driver: "
	sleep 1
    return $RC    
}

status()
{
    local RC=0
 
       if is_module ib_mthca; then
               echo
               echo "  HCA driver loaded"
               echo
       else
               echo
               echo $"HCA driver is not loaded"
               echo
       fi
  
    if is_module ib_ipoib; then
       get_interfaces
       echo $"Configured devices:"
       echo $interfaces
       echo
       echo $"Currently active devices:"
       
       for i in $interfaces
       do
            if [[ ! -e ${WD}/ifcfg-${i} && ! -e ${NETWORK_CONF_DIR}/ifcfg-${i} ]]; then
                continue
            fi
            echo `/sbin/ip -o link show $i | awk -F ": " '/UP>/ { print $2 }'`
            RC=$?
       done     
    fi
    
    echo
    
    local cnt=0
    
    for mod in  $STATUS_MODULES
    do
    	if is_module $mod; then
    		[ $cnt -eq 0 ] && echo "The following OFED modules are loaded:" && echo
    		let cnt++
    		echo "	$mod"
    	fi
    done
     
    echo
    
    return $RC
}


RC=0
start_time=$(date +%s | tr -d '[:space:]')

trap_handler()
{
    let run_time=$(date +%s | tr -d '[:space:]')-${start_time}

    # Ask to wait for 5 seconds if trying to stop openibd
    if [ $run_time -gt 5 ] && [ "$ACTION" == "stop" ]; then
        printf "\nProbably some application are still using InfiniBand modules...\n"
    else
        printf "\nPlease wait ...\n"
    fi    
    return 0
}

trap 'trap_handler' 2 9 15

case $ACTION in
	start)
                start
		;;
	stop)
		stop    
		;;
	restart)
                RESTART=1
		stop
                start
		;;
	status)
		status
		;;
	*)
		echo 
		echo "Usage: `basename $0` {start|stop|restart|status}"
		echo
		exit 1
		;;
esac

RC=$?
exit $RC
