# Generated automatically from Makefile.in by configure.
#	Copyright (C) 1994,1995 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this software; see the file COPYING.  If not, write to
# the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.


SHELL = /bin/sh

subdirs= rx sed

localfiles =	ANNOUNCE \
		COPYING \
		INSTALL \
		Makefile.in \
		configure \
		configure.in \
		config.sub \
		config.guess \
		doc \
		install-sh

localtreats = ANN.BX

# `all'
#     Compile the entire program.  This should be the default target.
#     This target need not rebuild any documentation files; info files
#     should normally be included in the distribution, and DVI files
#     should be made only when explicitly asked for.
all:
	@for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} all; \
		cd .. ;\
	done

#`install'
#     Compile the program and copy the executables, libraries, and so on
#     to the file names where they should reside for actual use.  If
#     there is a simple test to verify that a program is properly
#     installed then run that test.
#
#     Use `-' before any command for installing a man page, so that
#     `make' will ignore any errors.  This is in case there are systems
#     that don't have the Unix man page documentation system installed.
#
#     In the future, when we have a standard way of installing info
#     files, `install' targets will be the proper place to do so.
#
# Cygnus extention:
# 
#    `install'
#          Should *not* depend on the target `all'.  [feh!] If the program is
#          not already built, `make install' should fail.  This allows
#          you to install programs even when `make' would otherwise
#          determine them to be out of date.  This can happen, for
#          example, when the result of a `make all' is transported via
#          tape to another machine for installation.
#
subdir-inst-target=install-nobuild

install: all
	${MAKE} subdir-inst-target=install install-nobuild

install-nobuild:
	for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} ${subdir-inst-target}; \
		cd ..  ;\
	done

#`uninstall'
#     Delete all the installed files that the `install' target would
#     create (but not the noninstalled files such as `make all' would
#     create).
uninstall:
	for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} uninstall; \
		cd ..  ;\
	done


#`clean'
#     Delete all files from the current directory that are normally
#     created by building the program.  Don't delete the files that
#     record the configuration.  Also preserve files that could be made
#     by building, but normally aren't because the distribution comes
#     with them.
#
#     Delete `.dvi' files here if they are not part of the distribution.
#
# Cygnus extention:
# 
#    `clean'
#          Should remove any file that can be regenerated by the
#          `Makefile', excepting only the `Makefile' itself, and any
#          links created by `configure'.  That is, `make all clean'
#          should return all directories to their original condition.
#          If this is not done, then the command sequence
#
#               configure HOST1 ; make all install clean ;
#               configure HOST2 ; make all install
#
#          will fail because of intermediate files intended for HOST1.
clean:
	for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} clean; \
		cd ..  ;\
	done

#`distclean'
#     Delete all files from the current directory that are created by
#     configuring or building the program.  If you have unpacked the
#     source and built the program without creating any other files,
#     `make distclean' should leave only the files that were in the
#     distribution.
distclean:
	for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} distclean; \
		cd ..  ;\
	done


#`mostlyclean'
#     Like `clean', but may refrain from deleting a few files that people
#     normally don't want to recompile.  For example, the `mostlyclean'
#     target for GCC does not delete `libgcc.a', because recompiling it
#     is rarely necessary and takes a lot of time.
mostlyclean:
	for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} mostlyclean; \
		cd ..  ;\
	done


#`realclean'
#     Delete everything from the current directory that can be
#     reconstructed with this Makefile.  This typically includes
#     everything deleted by distclean, plus more: C source files
#     produced by Bison, tags tables, info files, and so on.
#
#     One exception, however: `make realclean' should not delete
#     `configure' even if `configure' can be remade using a rule in the
#     Makefile.  More generally, `make realclean' should not delete
#     anything that needs to exist in order to run `configure' and then
#     begin to build the program.
realclean:
	for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} realclean; \
		cd ..  ;\
	done


#`TAGS'
#     Update a tags table for this program.
TAGS:
	for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} TAGS; \
		cd ..  ;\
	done

#`info'
#     Generate any info files needed.  The best way to write the rules
#     is as follows:
#
#          info:  foo.info
#          
#          foo.info: $(srcdir)/foo.texi $(srcdir)/chap1.texi $(srcdir)/chap2.texi
#                  $(MAKEINFO) $(srcdir)/foo.texi
#
#     You must define the variable `MAKEINFO' in the Makefile.  It
#     should run the Makeinfo program, which is part of the Texinfo2
#     distribution.
info:
	for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} info; \
		cd ..  ;\
	done


#`dvi'
#     Generate DVI files for all TeXinfo documentation.  For example:
#
#          dvi: foo.dvi
#          
#          foo.dvi: $(srcdir)/foo.texi $(srcdir)/chap1.texi $(srcdir)/chap2.texi
#                  $(TEXI2DVI) $(srcdir)/foo.texi
#
#     You must define the variable `TEXI2DVI' in the Makefile.  It should
#     run the program `texi2dvi', which is part of the Texinfo2
#     distribution.  Alternatively, write just the dependencies, and
#     allow GNU Make to provide the command.
dvi:
	for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} dvi; \
		cd ..  ;\
	done

#`dist'
#     Create a distribution tar file for this program.  The tar file
#     should be set up so that the file names in the tar file start with
#     a subdirectory name which is the name of the package it is a
#     distribution for.  This name can include the version number.
#
#     For example, the distribution tar file of GCC version 1.40 unpacks
#     into a subdirectory named `gcc-1.40'.
#
#     The easiest way to do this is to create a subdirectory
#     appropriately named, use `ln' or `cp' to install the proper files
#     in it, and then `tar' that subdirectory.
#
#     The `dist' target should explicitly depend on all non-source files
#     that are in the distribution, to make sure they are up to date in
#     the distribution.  *Ref Making Releases: (standards)Releases.
distname = brand-x
distdir = $(distname)
treats = $(localtreats)
announcefile = ANN.BX

manifest-file:
	rm -f MANIFEST
	cp $(announcefile) ANNOUNCE
	for treat in $(localfiles) $(treats) ; \
	  do echo $$treat >> MANIFEST ; \
	done
	for subdir in $(subdirs) ; do \
	  make -s -f $$subdir/Makefile.in SUBDIR=$$subdir manifest >> MANIFEST ; \
	done
	sed -e "s%^%$(distdir)/%" MANIFEST > M2
	sed -e "/Entering dir/d" -e "/Leaving dir/d" M2 > MANIFEST
	rm M2


dist: manifest-file
	mkdir $(distdir)
	- cd $(distdir); \
	for file in $(localfiles) $(treats) $(subdirs); do ln -s ../$$file; done; \
	cd ..; \
	tar -zhcvf $(distname).tar.gz --files-from MANIFEST
	rm -rf $(distdir)

#`check'
#     Perform self-tests (if any).  The user must build the program
#     before running the tests, but need not install the program; you
#     should write the self-tests so that they work when the program is
#     built but not installed.
check:
	for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} check; \
		cd ..  ;\
	done


#`installcheck'
#     Perform installation tests (if any).  The user must build and
#     install the program before running the tests.  You should not
#     assume that `$(bindir)' is in the search path.
installcheck:
	for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} installcheck; \
		cd ..  ;\
	done


#`installdirs'
#     It's useful to add a target named `installdirs' to create the
#     directories where files are installed, and their parent
#     directories.  There is a script called `mkinstalldirs' which is
#     convenient for this; find it in the Texinfo package.You can use a
#     rule like this:
#
#          # Make sure all installation directories, e.g. $(bindir) actually exist by
#          # making them if necessary.
#          installdirs: mkinstalldirs
#                  $(srcdir)/mkinstalldirs $(bindir) $(datadir) $(libdir) \
#                                          $(infodir) $(mandir)
installdirs:
	for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} installdirs; \
		cd ..  ;\
	done


# Cygnus extention:
# 
#    `install-info'
#          Install all info files.
install-info:
	for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} install-info; \
		cd ..  ;\
	done


# Cygnus extention:
# 
#    `clean-info'
#          Remove all info files and any intermediate files that can be
#          generated from texinfo source.
clean-info:
	for dir in ${subdirs}; do \
		cd $$dir; \
		${MAKE} clean-info; \
		cd ..  ;\
	done


# Cygnus extention:
# 
#    `Makefile'
#          Calls `./config.status' to rebuild the `Makefile' in this
#          directory.
Makefile:
	${SHELL-/bin/sh} config.status
