From nobody  Mon Dec 22 22:27:24 1997
Received: (from nobody@localhost)
          by hub.freebsd.org (8.8.7/8.8.7) id WAA09903;
          Mon, 22 Dec 1997 22:27:24 -0800 (PST)
          (envelope-from nobody)
Message-Id: <199712230627.WAA09903@hub.freebsd.org>
Date: Mon, 22 Dec 1997 22:27:24 -0800 (PST)
From: david_hansen@ibm.net
To: freebsd-gnats-submit@freebsd.org
Subject: Freeze after config
X-Send-Pr-Version: www-1.0

>Number:         5367
>Category:       misc
>Synopsis:       Freeze after config
>Confidential:   no
>Severity:       critical
>Priority:       low
>Responsible:    steve
>State:          closed
>Quarter:
>Keywords:
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Mon Dec 22 22:30:01 PST 1997
>Closed-Date:    Wed Jan 7 16:04:44 PST 1998
>Last-Modified:  Wed Jan  7 16:06:14 PST 1998
>Originator:     David Hansen
>Release:        2.2.5
>Organization:
>Environment:
haven't gotten that far
>Description:
After the initial installation device configuration, the machine 
freezes.  This is after one of the very initial menus during 
beginning installation.  The visual device editor as well as the command
line based one both fail.  The visual one fails after the exit/save
and the command line one fails after the exit.  I would assume these
are exactly equal points as far as the machine is concerned.  After
trying to save the floppy drive is accessed once and the HD is accessed
on additional time as well.  The machine is not just busy, time will not
fix the problem.  The machine is an IBM Aptiva S64 with 48MB RAM and a 
real Intel NON-MMX P166.  
>How-To-Repeat:

>Fix:

>Release-Note:
>Audit-Trail:

From: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
To: david_hansen@ibm.net
Cc: freebsd-gnats-submit@freebsd.org, yokota@zodiac.mech.utsunomiya-u.ac.jp
Subject: Re: misc/5367: Freeze after config 
Date: Tue, 23 Dec 1997 17:24:59 +0900

 >>Number:         5367
 >>Category:       misc
 >>Synopsis:       Freeze after config
 >>Confidential:   no
 >>Severity:       critical
 >>Priority:       low
 >>Responsible:    freebsd-bugs
 >>State:          open
 >>Class:          sw-bug
 >>Submitter-Id:   current-users
 >>Arrival-Date:   Mon Dec 22 22:30:01 PST 1997
 >>Last-Modified:
 >>Originator:     David Hansen
 >>Organization:
 >>Release:        2.2.5
 >>Environment:
 >haven't gotten that far
 >>Description:
 >After the initial installation device configuration, the machine 
 >freezes.  This is after one of the very initial menus during 
 >beginning installation.  The visual device editor as well as the command
 >line based one both fail.  The visual one fails after the exit/save
 >and the command line one fails after the exit.  I would assume these
 >are exactly equal points as far as the machine is concerned.  After
 >trying to save the floppy drive is accessed once and the HD is accessed
 >on additional time as well.  The machine is not just busy, time will not
 >fix the problem.  The machine is an IBM Aptiva S64 with 48MB RAM and a 
 >real Intel NON-MMX P166.  
 
 Which devices do you enable/disable in the configuration menu?
 Did you by any chance disable sc0?  It's the console driver without
 which FreeBSD cannot show anything on the display.
 
 Kazu

From: "Jordan K. Hubbard" <jkh@time.cdrom.com>
To: david_hansen@ibm.net
Cc: freebsd-gnats-submit@FreeBSD.ORG
Subject: Re: misc/5367: Freeze after config 
Date: Tue, 23 Dec 1997 08:06:44 -0800

 > After the initial installation device configuration, the machine 
 > freezes.  This is after one of the very initial menus during 
 
 You didn't do something terminally silly like delete sc0 or anything,
 did you?
State-Changed-From-To: open->closed 
State-Changed-By: steve 
State-Changed-When: Wed Jan 7 16:04:44 PST 1998 
State-Changed-Why:  
The orginator has solved the problem mentioned in this PR 
and we are working on a new list of questions. 
>Unformatted:
