From nobody@FreeBSD.org  Mon Sep 30 23:16:37 2002
Return-Path: <nobody@FreeBSD.org>
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 139F937B401
	for <freebsd-gnats-submit@FreeBSD.org>; Mon, 30 Sep 2002 23:16:37 -0700 (PDT)
Received: from www.freebsd.org (www.freebsd.org [216.136.204.117])
	by mx1.FreeBSD.org (Postfix) with ESMTP id B53F843E77
	for <freebsd-gnats-submit@FreeBSD.org>; Mon, 30 Sep 2002 23:16:36 -0700 (PDT)
	(envelope-from nobody@FreeBSD.org)
Received: from www.freebsd.org (localhost [127.0.0.1])
	by www.freebsd.org (8.12.6/8.12.6) with ESMTP id g916Ga7R053740
	for <freebsd-gnats-submit@FreeBSD.org>; Mon, 30 Sep 2002 23:16:36 -0700 (PDT)
	(envelope-from nobody@www.freebsd.org)
Received: (from nobody@localhost)
	by www.freebsd.org (8.12.6/8.12.6/Submit) id g916GakE053739;
	Mon, 30 Sep 2002 23:16:36 -0700 (PDT)
Message-Id: <200210010616.g916GakE053739@www.freebsd.org>
Date: Mon, 30 Sep 2002 23:16:36 -0700 (PDT)
From: Paul Mason <paulwm2001@msn.com>
To: freebsd-gnats-submit@FreeBSD.org
Subject: ppp will not connect to att worldnet over dialup
X-Send-Pr-Version: www-1.0

>Number:         43547
>Category:       misc
>Synopsis:       ppp will not connect to att worldnet over dialup
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Mon Sep 30 23:20:01 PDT 2002
>Closed-Date:    Fri Aug 15 22:40:40 PDT 2003
>Last-Modified:  Fri Aug 15 22:40:40 PDT 2003
>Originator:     Paul Mason
>Release:        FreeBSD 4.6
>Organization:
n/a
>Environment:
FreeBSD  4.6-RELEASE FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002     murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC  i386
 
>Description:
ppp.log excerpt of latest connect attempt:

Phase: Using interface: tun0 
Phase: deflink: Created in closed state 
Command: default: ident user-ppp VERSION (built COMPILATIONDATE) 
Command: default: set device /dev/cuaa0 
Command: default: disable pred1 
Command: default: deny pred1 
Command: default: disable lqr 
Command: default: deny lqr 
Command: default: set speed 115200 
Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5            "" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT 
Command: default: set timeout 180 
Command: default: enable dns 
Phase: PPP Started (interactive mode). 
Command: /dev/tty: accept chap 
Command: /dev/tty: set phone 3457965 
Command: /dev/tty: set authkey ******** 
Command: /dev/tty: set authname ********(authname omitted)
Command: /dev/tty: set openmode active 
Command: /dev/tty: dial 
Phase: bundle: Establish 
Phase: deflink: closed -> opening 
Phase: deflink: Connected! 
Phase: deflink: opening -> dial 
Chat: Phone: 3457965 
Chat: deflink: Dial attempt 1 of 1 
Chat: Send: AT^M 
Chat: Expect(5): OK 
Chat: Received: AT^M^M 
Chat: Received: OK^M 
Chat: Send: ATE1Q0^M 
Chat: Expect(5): OK 
Chat: Received: ATE1Q0^M^M 
Chat: Received: OK^M 
Chat: Send: ATDT3457965^M 
Chat: Expect(40): CONNECT 
Chat: Received: ATDT3457965^M^M 
Chat: Received: CONNECT 49333^M 
Phase: deflink: dial -> carrier 
Phase: deflink: /dev/cuaa0: CD detected 
Phase: deflink: carrier -> login 
Phase: deflink: login -> lcp 
LCP: FSM: Using "deflink" as a transport 
LCP: deflink: State change Initial --> Closed 
LCP: deflink: State change Closed --> Stopped 
LCP: deflink: LayerStart 
LCP: deflink: SendConfigReq(1) state = Stopped 
LCP:  ACFCOMP[2] 
LCP:  PROTOCOMP[2] 
LCP:  ACCMAP[6] 0x00000000 
LCP:  MRU[4] 1500 
LCP:  MAGICNUM[6] 0x85af0328 
LCP: deflink: State change Stopped --> Req-Sent 
LCP: deflink: RecvConfigReq(1) state = Req-Sent 
LCP:  MRU[4] 1514 
LCP:  ACCMAP[6] 0x00000000 
LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05) 
LCP:  MAGICNUM[6] 0x46e3226e 
LCP:  PROTOCOMP[2] 
LCP:  ACFCOMP[2] 
LCP:  MRRU[4] 1514 
LCP:  ENDDISC[3] Null Class 
LCP: deflink: SendConfigRej(1) state = Req-Sent 
LCP:  MRRU[4] 1514 
LCP: Sending ident magic 85af0328 text user-ppp 2.3.3 (built Jun 11 2002) 
LCP: deflink: SendIdent(0) state = Req-Sent 
LCP: deflink: RecvConfigAck(1) state = Req-Sent 
LCP: deflink: State change Req-Sent --> Ack-Rcvd 
LCP: deflink: RecvConfigReq(2) state = Ack-Rcvd 
LCP:  MRU[4] 1514 
LCP:  ACCMAP[6] 0x00000000 
LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05) 
LCP:  MAGICNUM[6] 0x46e3226e 
LCP:  PROTOCOMP[2] 
LCP:  ACFCOMP[2] 
LCP: deflink: SendConfigAck(2) state = Ack-Rcvd 
LCP:  MRU[4] 1514 
LCP:  ACCMAP[6] 0x00000000 
LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05) 
LCP:  MAGICNUM[6] 0x46e3226e 
LCP:  PROTOCOMP[2] 
LCP:  ACFCOMP[2] 
LCP: deflink: State change Ack-Rcvd --> Opened 
LCP: deflink: LayerUp 
LCP: Sending ident magic 85af0328 text user-ppp 2.3.3 (built Jun 11 2002) 
LCP: deflink: SendIdent(1) state = Opened 
Phase: bundle: Authenticate 
Phase: deflink: his = CHAP 0x05, mine = none 
Phase: Chap Input: CHALLENGE (16 bytes from HiPer) 
Phase: Chap Output: RESPONSE (********(authname omitted)) 
Phase: Chap Input: FAILURE dropped (got id 0, not 3) 
LCP: deflink: RecvTerminateReq(4) state = Opened 
LCP: deflink: LayerDown 
LCP: deflink: SendTerminateAck(4) state = Opened 
LCP: deflink: State change Opened --> Stopping 
Phase: deflink: Carrier lost 
LCP: deflink: State change Stopping --> Starting 
LCP: deflink: LayerFinish 
LCP: deflink: State change Starting --> Initial 
Phase: deflink: Disconnected! 
Phase: deflink: lcp -> logout 
Phase: deflink: Disconnected! 
Phase: deflink: logout -> hangup 
Phase: deflink: Connect time: 27 secs: 441 octets in, 317 octets out 
Phase: deflink: : 15 packets in, 7 packets out 
Phase:  total 28 bytes/sec, peak 151 bytes/sec on Thu  12 20:12:58 2002 
Phase: deflink: hangup -> closed 
Phase: bundle: Dead 

hardware: askey 56k external modem, area code 540,
setup files as per http://www.wurd.com/eng/setup/dialers/freebsd.html directions, then followed directions in manpages/online handbook/various websources. All ultimatly encountered same problem as shown above. Windows has been able to connect without fuss or a hair ball, freebsd and my cat don't have so much luck.
>How-To-Repeat:
open a ppp session and try to connect to connect to at&t worldnet dialup service.
>Fix:
      unknown
>Release-Note:
>Audit-Trail:

From: aida-s@jcom.home.ne.jp
To: freebsd-gnats-submit@FreeBSD.org, paulwm2001@msn.com
Cc:  
Subject: Re: misc/43547: ppp will not connect to att worldnet over dialup
Date: Sun, 13 Oct 2002 00:39:56 +0900 (JST)

 Dear Paul Mason,
 
 It seems that simply a wrong username or password is sent, whether you input
 your username/password correctly or not. Doesn't it include '$', '\' or '~'?
 If so, you might have encountered docs/42762 problem. To escape these
 characters might help you.
 
 AIDA Shinra
State-Changed-From-To: open->feedback 
State-Changed-By: johan 
State-Changed-When: Fri Oct 25 02:05:15 PDT 2002 
State-Changed-Why:  
Hi Paul, did you try AIDA Shinra suggestion? 

Does you password or username contain $, or ~? 

Please followup by sending a mail to  
freebsd-gnats-submit@FreeBSD.org 
with the subject of this mail intact. 




http://www.freebsd.org/cgi/query-pr.cgi?pr=43547 

From: "PAUL MASON" <paulwm2001@msn.com>
To: freebsd-gnats-submit@FreeBSD.org
Cc:  
Subject: Re: misc/43547: ppp will not connect to att worldnet over dialup 
Date: Mon, 04 Nov 2002 21:18:53 -0500

 Afraid My password doesn't. The closest to those it contains is a period and 
 the password is eight letters. It is one of those <name>@att.net ones 
 though, if that is any help.
 
 Thank you for the suggestion though, I tried creating another account 
 without a period in the name, no luck.
 
 Sincerely,
 Paul
 
 
 
 
 _________________________________________________________________
 Get a speedy connection with MSN Broadband. Join now! 
 http://resourcecenter.msn.com/access/plans/freeactivation.asp
 

From: Giorgos Keramidas <keramida@FreeBSD.org>
To: Paul Mason <paulwm2001@msn.com>
Cc: bug-followup@FreeBSD.org
Subject: Re: misc/43547: ppp will not connect to att worldnet over dialup
Date: Tue, 25 Mar 2003 17:56:13 +0200

 Hi, can you try quoting your authname and authkey using double quotes?
 
 For example:
 
 : upnet:
 :  set phone 8962415150
 :  set authname "giorgos keramidas"
 :  set authkey "key of giorgos"
State-Changed-From-To: feedback->closed 
State-Changed-By: kris 
State-Changed-When: Fri Aug 15 22:40:32 PDT 2003 
State-Changed-Why:  
Feedback timeout 

http://www.freebsd.org/cgi/query-pr.cgi?pr=43547 
>Unformatted:
