From jin@gracie.lbl.gov  Tue Dec 21 10:00:26 1999
Return-Path: <jin@gracie.lbl.gov>
Received: from gracie.lbl.gov (gracie.lbl.gov [131.243.2.175])
	by hub.freebsd.org (Postfix) with ESMTP id F07AC155A5
	for <FreeBSD-gnats-submit@freebsd.org>; Tue, 21 Dec 1999 10:00:09 -0800 (PST)
	(envelope-from jin@gracie.lbl.gov)
Received: (from jin@localhost)
	by gracie.lbl.gov (8.9.3/8.9.3) id KAA00633;
	Tue, 21 Dec 1999 10:00:09 -0800 (PST)
	(envelope-from jin)
Message-Id: <199912211800.KAA00633@gracie.lbl.gov>
Date: Tue, 21 Dec 1999 10:00:09 -0800 (PST)
From: Jin Guojun (FTG staff) <jin@gracie.lbl.gov>
Reply-To: j_guojun@lbl.gov
To: FreeBSD-gnats-submit@freebsd.org
Subject: 3.4-RELEASE installation hang on aic0 SCSI -- timeout
X-Send-Pr-Version: 3.2

>Number:         15610
>Category:       misc
>Synopsis:       3.4-RELEASE installation hang on aic0 SCSI -- timeout
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    freebsd-bugs
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Dec 21 10:10:01 PST 1999
>Closed-Date:    Wed Mar 28 11:16:37 PST 2001
>Last-Modified:  Wed Mar 28 11:16:46 PST 2001
>Originator:     Jin Guojun (FTG staff)
>Release:        FreeBSD 3.4-RELEASE i386
>Organization:
>Environment:

	3.4-RELEASE installation floppies
	Hardware info.: (Current run 3.3-RELEASE)
	ASUS P2B-F with P-III 500
	NCR (Symbios) 875 SCSI controller
		Seagate ST15320N disk drive
		HP C1533A dat tape drive

	3.3-RELEASE boot output
Waiting 15 seconds for SCSI devices to settle
sa0 at ncr0 bus 0 target 3 lun 0
sa0: <HP C1533A A612> Removable Sequential Access SCSI-2 device 
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
da0 at ncr0 bus 0 target 1 lun 0
da0: <SEAGATE ST15230N 0498> Fixed Direct Access SCSI-2 device 
da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da0: 4095MB (8386733 512 byte sectors: 255H 63S/T 522C)


>Description:

	3.4-RELEASE installation output
	Waiting 15 seconds for SCSI devices to settle
	(ptobe15:aic0:0:0:0): ccb 0xc0d03e00 -- Tiem Out, phase 0x0, state 1
	(ptobe15:aic0:0:0:0): ccb 0xc0d03e00 -- Tiem Out, phase 0x0, state 1
	(ptobe15:aic0:0:0:0): ccb 0xc0d03e00 -- Tiem Out, phase 0x0, state 1
	(ptobe15:aic0:0:0:0): ccb 0xc0d03e00 -- Tiem Out, phase 0x0, state 1
	...

>How-To-Repeat:

	happened to above hardwares.

>Fix:
	
	


>Release-Note:
>Audit-Trail:

From: Jin Guojun (FTG staff) <jin@george.lbl.gov>
To: FreeBSD-gnats-submit@FreeBSD.ORG
Cc:  
Subject: Re: misc/15610: 3.4-RELEASE installation hang on aic0 SCSI -- timeout
Date: Tue, 21 Dec 1999 15:14:05 -0800 (PST)

 More information on this installation.
 After disbale aic, the installation will continue to the installation menu.
 Everything can be set up correctly, but immediately panic whenever the
 installing procedure starts. The installation reboots the machine :-(
 
 	-Jin
 
 
 > >Number:         15610
 > >Category:       misc
 > >Synopsis:       3.4-RELEASE installation hang on aic0 SCSI -- timeout
 > >Confidential:   no
 > >Severity:       serious
 > >Priority:       high
 > >Responsible:    freebsd-bugs
 > >State:          open
 > >Quarter:        
 > >Keywords:       
 > >Date-Required:
 > >Class:          sw-bug
 > >Submitter-Id:   current-users
 > >Arrival-Date:   Tue Dec 21 10:10:01 PST 1999
 > >Closed-Date:
 > >Last-Modified:
 > >Originator:     Jin Guojun (FTG staff)
 > >Release:        FreeBSD 3.4-RELEASE i386
 > >Organization:
 > >Environment:
 > 
 > 	3.4-RELEASE installation floppies
 > 	Hardware info.: (Current run 3.3-RELEASE)
 > 	ASUS P2B-F with P-III 500
 > 	NCR (Symbios) 875 SCSI controller
 > 		Seagate ST15320N disk drive
 > 		HP C1533A dat tape drive
 > 
 > 	3.3-RELEASE boot output
 > Waiting 15 seconds for SCSI devices to settle
 > sa0 at ncr0 bus 0 target 3 lun 0
 > sa0: <HP C1533A A612> Removable Sequential Access SCSI-2 device 
 > sa0: 10.000MB/s transfers (10.000MHz, offset 8)
 > da0 at ncr0 bus 0 target 1 lun 0
 > da0: <SEAGATE ST15230N 0498> Fixed Direct Access SCSI-2 device 
 > da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
 > da0: 4095MB (8386733 512 byte sectors: 255H 63S/T 522C)
 > 
 > 
 > >Description:
 > 
 > 	3.4-RELEASE installation output
 > 	Waiting 15 seconds for SCSI devices to settle
 > 	(ptobe15:aic0:0:0:0): ccb 0xc0d03e00 -- Tiem Out, phase 0x0, state 1
 > 	(ptobe15:aic0:0:0:0): ccb 0xc0d03e00 -- Tiem Out, phase 0x0, state 1
 > 	(ptobe15:aic0:0:0:0): ccb 0xc0d03e00 -- Tiem Out, phase 0x0, state 1
 > 	(ptobe15:aic0:0:0:0): ccb 0xc0d03e00 -- Tiem Out, phase 0x0, state 1
 > 	...
 > 
 > >How-To-Repeat:
 > 
 > 	happened to above hardwares.
 > 
 > >Fix:
 > 	
 > 	
 > 
 > 
 > >Release-Note:
 > >Audit-Trail:
 > >Unformatted:
 > 
 > 
 > To Unsubscribe: send mail to majordomo@FreeBSD.org
 > with "unsubscribe freebsd-bugs" in the body of the message
 
State-Changed-From-To: open->closed 
State-Changed-By: phk 
State-Changed-When: Wed Mar 28 11:16:37 PST 2001 
State-Changed-Why:  
Antique PR. 

http://www.freebsd.org/cgi/query-pr.cgi?pr=15610 
>Unformatted:
