From nobody@FreeBSD.org  Wed Apr  4 14:39:02 2007
Return-Path: <nobody@FreeBSD.org>
Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52])
	by hub.freebsd.org (Postfix) with ESMTP id 9E18416A402
	for <freebsd-gnats-submit@FreeBSD.org>; Wed,  4 Apr 2007 14:39:02 +0000 (UTC)
	(envelope-from nobody@FreeBSD.org)
Received: from www.freebsd.org (www.freebsd.org [69.147.83.33])
	by mx1.freebsd.org (Postfix) with ESMTP id 825A313C45A
	for <freebsd-gnats-submit@FreeBSD.org>; Wed,  4 Apr 2007 14:39:02 +0000 (UTC)
	(envelope-from nobody@FreeBSD.org)
Received: from www.freebsd.org (localhost [127.0.0.1])
	by www.freebsd.org (8.13.1/8.13.1) with ESMTP id l34Ed1IT066186
	for <freebsd-gnats-submit@FreeBSD.org>; Wed, 4 Apr 2007 14:39:01 GMT
	(envelope-from nobody@www.freebsd.org)
Received: (from nobody@localhost)
	by www.freebsd.org (8.13.1/8.13.1/Submit) id l34EY0bG065355;
	Wed, 4 Apr 2007 14:34:00 GMT
	(envelope-from nobody)
Message-Id: <200704041434.l34EY0bG065355@www.freebsd.org>
Date: Wed, 4 Apr 2007 14:34:00 GMT
From: Maurizio Giunti<maurizio@mauriziogiunti.it>
To: freebsd-gnats-submit@FreeBSD.org
Subject: tar error in listing archive contents (-t command)
X-Send-Pr-Version: www-3.0

>Number:         111236
>Category:       misc
>Synopsis:       tar error in listing archive contents (-t command)
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    cperciva
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Wed Apr 04 14:40:05 GMT 2007
>Closed-Date:    Thu Apr 05 00:27:02 GMT 2007
>Last-Modified:  Thu Apr 05 00:27:02 GMT 2007
>Originator:     Maurizio Giunti
>Release:        6.2
>Organization:
MGShareware
>Environment:
uname -a:
FreeBSD gandalf.homegiunti 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Tue Jan 30 16:56:24 CET 2007     root@gandalf.homegiunti:/usr/src/sys/i386/compile/GANDALF  i386

dmesg:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Tue Jan 30 16:56:24 CET 2007
    root@gandalf.homegiunti:/usr/src/sys/i386/compile/GANDALF
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.52-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf49  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Logical CPUs per core: 2
real memory  = 1072693248 (1023 MB)
avail memory = 1040539648 (992 MB)
MPTable: <Intel    Lakeport    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
cpu1 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa3fc00-0xffa3ffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib1: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port 0xc800-0xc8ff mem 0xff8ff000-0xff8fffff irq 16 at device 0.0 on pci1
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
rl0: <RealTek 8139 10/100BaseTX> port 0xc400-0xc4ff mem 0xff8efc00-0xff8efcff irq 20 at device 4.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:16:17:49:45:ef
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0xe880-0xe887,0xe800-0xe803,0xe480-0xe487,0xe400-0xe403,0xe080-0xe08f irq 19 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
pwc0: vendor 0x046d product 0x08b4, rev 1.10/0.03, addr 2
pwc0: Logitech QuickCam Zoom (new model) USB webcam
pwc0: This camera is equipped with a unknown type of sensor (112)
ugen0: American Power Conversion Back-UPS RS 1000 FW:7.g8 .I USB FW:g8, rev 1.10/1.06, addr 2
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled
acd0: DVDR <BENQ DVD DD DW1640/BSHB> at ata0-slave UDMA33
ad4: 286188MB <Maxtor 6L300S0 BACE1G20> at ata2-master SATA150
GEOM_MIRROR: Device gm0 created (id=2613154795).
GEOM_MIRROR: Device gm0: provider ad4 detected.
ad5: 305245MB <MAXTOR STM3320820AS 3.AAE> at ata2-slave SATA150
ad6: 286188MB <Maxtor 6L300S0 BACE1G20> at ata3-master SATA150
Waiting 5 seconds for SCSI devices to settle
GEOM_MIRROR: Device gm0: provider ad6 detected.
GEOM_MIRROR: Device gm0: provider ad6 activated.
GEOM_MIRROR: Device gm0: provider ad4 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <QUANTUM DLT7000 2561> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/mirror/gm0s1a
rl0: link state changed to UP


>Description:
If I create a tar archive containing big files (over 1GB) I get errors when I try to list its content with -t tar command, while extracting (-x) works fine.
Example:
gandalf# ll -h /archive/dumps/19
total 6075088
-rw-r--r--  1 root  wheel   1.6G Mar 19 05:09 foto.dump.gz
-rw-r--r--  1 root  wheel   2.1G Mar 19 04:59 home.dump.gz
-rw-r--r--  1 root  wheel   1.5G Mar 19 05:23 mysql.dump.gz
-rw-r--r--  1 root  wheel    44M Mar 19 04:50 root.dump.gz
-rw-r--r--  1 root  wheel   608M Mar 19 05:04 usr.dump.gz
-rw-r--r--  1 root  wheel    10M Mar 19 05:04 var.dump.gz
gandalf# tar -cvf /disk2/test/test.tar 19
a 19
a 19/root.dump.gz
a 19/home.dump.gz
a 19/usr.dump.gz
a 19/var.dump.gz
a 19/foto.dump.gz
a 19/mysql.dump.gz
gandalf# cd /disk2/test/
gandalf# tar -tvf test.tar
drwxr-xr-x  0 root   wheel       0 Mar 19 05:09 19
-rw-r--r--  0 root   wheel 45711222 Mar 19 04:50 19/root.dump.gz
-rw-r--r--  0 root   wheel 2210089943 Mar 19 04:59 19/home.dump.gz
tar: (Empty error message)
gandalf# tar -xvf test.tar
x 19
x 19/root.dump.gz
x 19/home.dump.gz
....

Note: if I use as tar output device a tape driver (I own a DLT tape) I get a different error:
gandalf# tar tv
drwxr-xr-x  0 root   wheel       0 Mar 28 04:49 archive/dumps
drwxr-xr-x  0 root   wheel       0 Mar 28 04:51 archive/dumps/28
-rw-r--r--  0 root   wheel  340251 Mar 28 04:49 archive/dumps/28/root.dump.gz
tar: Unrecognized archive format: Inappropriate file type or format

And again I have no problems in untarring files with tar xv command.



>How-To-Repeat:
Create over 1GB files and tar them. Then try use tar tv to list their contents.

>Fix:
none


>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->closed 
State-Changed-By: cperciva 
State-Changed-When: Thu Apr 5 00:21:13 UTC 2007 
State-Changed-Why:  
I fixed this in HEAD and RELENG_6 in January.  The problem 
concerned the use of size_t / ssize_t for skip lengths; on 
32-bit systems this broke skipping for archive entries of 
2GB or more. 



Responsible-Changed-From-To: freebsd-bugs->cperciva 
Responsible-Changed-By: cperciva 
Responsible-Changed-When: Thu Apr 5 00:21:13 UTC 2007 
Responsible-Changed-Why:  

http://www.freebsd.org/cgi/query-pr.cgi?pr=111236 
>Unformatted:
