From nobody@FreeBSD.org  Wed Sep 15 21:54:00 2004
Return-Path: <nobody@FreeBSD.org>
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 28A6516A4CE
	for <freebsd-gnats-submit@FreeBSD.org>; Wed, 15 Sep 2004 21:54:00 +0000 (GMT)
Received: from www.freebsd.org (www.freebsd.org [216.136.204.117])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 0BDC943D1D
	for <freebsd-gnats-submit@FreeBSD.org>; Wed, 15 Sep 2004 21:54:00 +0000 (GMT)
	(envelope-from nobody@FreeBSD.org)
Received: from www.freebsd.org (localhost [127.0.0.1])
	by www.freebsd.org (8.12.11/8.12.11) with ESMTP id i8FLrxQa001598
	for <freebsd-gnats-submit@FreeBSD.org>; Wed, 15 Sep 2004 21:53:59 GMT
	(envelope-from nobody@www.freebsd.org)
Received: (from nobody@localhost)
	by www.freebsd.org (8.12.11/8.12.11/Submit) id i8FLrxCT001597;
	Wed, 15 Sep 2004 21:53:59 GMT
	(envelope-from nobody)
Message-Id: <200409152153.i8FLrxCT001597@www.freebsd.org>
Date: Wed, 15 Sep 2004 21:53:59 GMT
From: "Leroy R. van Logchem" <Leroy.vanLogchem@wldelft.nl>
To: freebsd-gnats-submit@FreeBSD.org
Subject: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05, 2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
X-Send-Pr-Version: www-2.3

>Number:         71778
>Category:       kern
>Synopsis:       5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05, 2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-scsi
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Wed Sep 15 22:00:43 GMT 2004
>Closed-Date:    Mon Oct 24 07:01:02 GMT 2005
>Last-Modified:  Mon Oct 24 07:01:02 GMT 2005
>Originator:     Leroy R. van Logchem
>Release:        5.3-BETA3
>Organization:
WL | delft hydraulics
>Environment:
FreeBSD 5.3-BETA3
Supermicro 6013P8 server
Adaptec AIC-7902 with Adaptec 2015S module. I2O
Dual 36GB scsi onboard (being mirrored by the 2015S)
External Eonstor A08 raid cabinet
>Description:
The FreeBSD 5.3-BETA installer says no drives found.

Long problem description:
------------------------------

This occurs when using first install cd. On the system is still a 
working FBSD 4.10 install
which can use all drives connected to the Adaptec 2015S.

The bios output of the controller:
-------------------------------------

The Adaptec 2015S bios shows:

Controller: 0xF8300000 IRQ:5
Drive:   (0,0,0)   Adaptec RAID1      34GB
Proc:     (0,6,0)   SUPER GEM318
Drive:   (1,0,0)   IFT   ES A08U-G   697GB
Drive:   (1,0,1)   IFT   ES A08U-G   687GB

The 5.3-BETA3 bootloader reports:
Bios Drive C: is disk1
Bios Drive D: is disk2
Bios Drive E: is disk3

System hardware:
---------------------
Supermicro 6013P8 server
Adaptec AIC-7902 with Adaptec 2015S module.
Dual 36GB scsi onboard (being mirrored using the 2015S)
External Eonstor A08 raid cabinet.

Dmesg output captured using the live-cd:
----------------------------------------------

opyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
      The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA3
  root at mack.dcsl.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2799.69-MHz 686-class CPU)
Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS, 

HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory  = 1073217536 (1023 MB)
avail memory = 1036460032 (988 MB)
MPTable: <  Kings Canyon>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 24
ioapic2: Assuming intbase of 48
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <base peripheral, interrupt controller> at device 28.0 (no driver 
attached)
pcib2: <MPTable PCI-PCI bridge> at device 29.0 on pci1
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 
0x3000-0x303f mem 0xf8200000-0xf821ffff irq 54 at device 3.0 on p
ci2
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:30:48:2a:53:be
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 
0x3040-0x307f mem 0xf8220000-0xf823ffff irq 55 at device 3.1 on p
ci2
em1: [GIANT-LOCKED]
em1: Ethernet address: 00:30:48:2a:53:bf
em1:  Speed:N/A  Duplex:N/A
pci1: <base peripheral, interrupt controller> at device 30.0 (no driver 
attached)
pcib3: <MPTable PCI-PCI bridge> at device 31.0 on pci1
pci3: <PCI bus> on pcib3
asr0: <Adaptec Caching SCSI RAID> mem 
0xfc000000-0xfdffffff,0xfb000000-0xfbffffff,0xf8300000-0xf83fffff irq 30 
at device 3.0 on pci3
asr0: [GIANT-LOCKED]
asr0: ADAPTEC 2015S FW Rev. 3B05, 2 channel, 256 CCBs, Protocol I2O
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 
0x2000-0x201f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 
0x2020-0x203f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 
0x2040-0x205f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib4: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci4: <PCI bus> on pcib4
pci4: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 
0x2060-0x206f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
cpu1 on motherboard
orm0: <ISA Option ROMs> at iomem 
0xe0000-0xe3fff,0xc9000-0xcefff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model VersaPad, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ahc0: No resources alloated.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
ahc0: No resources alloated.
ahc0: No resources alloated.
ahc0: No resources alloated.
ahc0: No resources alloated.
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 10.000 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09d4800
ATAPI_RESET time = 40us
acd0: CDROM <CD-224E/1.9A> at ata1-master UDMA33
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/md0
>How-To-Repeat:
Use a Supermicro 6013P8's with Adaptec 2015 SCSI. Boot the FreeBSD 5.3-BETA2 or 3 installation cd.
>Fix:
No fix but 4.10-RELEASE can see and use the scsi drives and external attached raid-cabinets.
>Release-Note:
>Audit-Trail:

From: Peter Pentchev <roam@ringlet.net>
To: "Leroy R. van Logchem" <Leroy.vanLogchem@wldelft.nl>
Cc: bug-followup@FreeBSD.org
Subject: Re: kern/71778: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05, 2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
Date: Thu, 16 Sep 2004 03:40:37 +0300

 On Wed, Sep 15, 2004 at 09:53:59PM +0000, Leroy R. van Logchem wrote:
 > 
 > >Number:         71778
 > >Category:       kern
 > >Synopsis:       5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05, 2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
 > >Originator:     Leroy R. van Logchem
 [snip]
 > Dmesg output captured using the live-cd:
 
 Could you also provide the output of 'pnpinfo' and 'pciconf -lv' from
 the live CD's shell prompt?
 
 G'luck,
 Peter
 
 -- 
 Peter Pentchev	roam@ringlet.net    roam@cnsys.bg    roam@FreeBSD.org
 PGP key:	http://people.FreeBSD.org/~roam/roam.key.asc
 Key fingerprint	FDBA FD79 C26F 3C51 C95E  DF9E ED18 B68D 1619 4553
 I am the thought you are now thinking.
Responsible-Changed-From-To: freebsd-bugs->freebsd-scsi 
Responsible-Changed-By: linimon 
Responsible-Changed-When: Thu Sep 16 03:41:51 GMT 2004 
Responsible-Changed-Why:  
Over to mailing list. 

http://www.freebsd.org/cgi/query-pr.cgi?pr=71778 

From: Leroy van Logchem <leroy.vanlogchem@wldelft.nl>
To: freebsd-gnats-submit@freebsd.org, Leroy.vanLogchem@wldelft.nl
Cc:  
Subject: Re: kern/71778: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05,
 2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
Date: Thu, 16 Sep 2004 09:48:15 +0200

 Output of 'pciconf -lv':
 ------------------------
 
 hostb0@pci0:0:0:        class=0x060000 card=0x358015d9 chip=0x254c8086 
 rev=0x01 hdr=0x00
     class    = bridge
     subclass = HOST-PCI
 none0@pci0:0:1: class=0xff0000 card=0x358015d9 chip=0x25418086 rev=0x01 
 hdr=0x00
 pcib1@pci0:2:0: class=0x060400 card=0x00000000 chip=0x25438086 rev=0x01 
 hdr=0x01
     class    = bridge
     subclass = PCI-PCI
 uhci0@pci0:29:0:        class=0x0c0300 card=0x358015d9 chip=0x24828086 
 rev=0x02 hdr=0x00
     class    = serial bus
     subclass = USB
 uhci1@pci0:29:1:        class=0x0c0300 card=0x358015d9 chip=0x24848086 
 rev=0x02 hdr=0x00
     class    = serial bus
     subclass = USB
 uhci2@pci0:29:2:        class=0x0c0300 card=0x358015d9 chip=0x24878086 
 rev=0x02 hdr=0x00
     class    = serial bus
     subclass = USB
 pcib4@pci0:30:0:        class=0x060400 card=0x00000000 chip=0x244e8086 
 rev=0x42 hdr=0x01
     class    = bridge
     subclass = PCI-PCI
 isab0@pci0:31:0:        class=0x060100 card=0x00000000 chip=0x24808086 
 rev=0x02 hdr=0x00
     class    = bridge
     subclass = PCI-ISA
 atapci0@pci0:31:1:      class=0x01018a card=0x358015d9 chip=0x248b8086 
 rev=0x02 hdr=0x00
     class    = mass storage
     subclass = ATA
 none1@pci0:31:3:        class=0x0c0500 card=0x358015d9 chip=0x24838086 
 rev=0x02 hdr=0x00
     class    = serial bus
     subclass = SMBus
 none2@pci1:28:0:        class=0x080020 card=0x358015d9 chip=0x14618086 
 rev=0x04 hdr=0x00
     class    = base peripheral
     subclass = interrupt controller
 pcib2@pci1:29:0:        class=0x060400 card=0x00000050 chip=0x14608086 
 rev=0x04 hdr=0x01
     class    = bridge
     subclass = PCI-PCI
 none3@pci1:30:0:        class=0x080020 card=0x358015d9 chip=0x14618086 
 rev=0x04 hdr=0x00
     class    = base peripheral
     subclass = interrupt controller
 pcib3@pci1:31:0:        class=0x060400 card=0x00000050 chip=0x14608086 
 rev=0x04 hdr=0x01
     class    = bridge
     subclass = PCI-PCI
 em0@pci2:3:0:   class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01 
 hdr=0x00
     class    = network
     subclass = ethernet
 em1@pci2:3:1:   class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01 
 hdr=0x00
     class    = network
     subclass = ethernet
 asr0@pci3:3:0:  class=0x010400 card=0xc0341044 chip=0xa5111044 rev=0x01 
 hdr=0x00
     class    = mass storage
     subclass = RAID
 none4@pci4:1:0: class=0x030000 card=0x00081002 chip=0x47521002 rev=0x27 
 hdr=0x00
     class    = display
     subclass = VGA
 
 Output of 'pnpinfo':
 --------------------
 Checking for Plug-n-Play devices...
 No Plug-n-Play devices were found
 
 

From: Peter Pentchev <roam@ringlet.net>
To: bug-followup@FreeBSD.org
Cc:  
Subject: Re: kern/71778: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05, 2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
Date: Thu, 16 Sep 2004 13:25:53 +0300

 Make sure GNATS sees the originator's follow-up...
 
 ----- Forwarded message from Leroy van Logchem <leroy.vanlogchem@wldelft.nl> -----
 
 Date: Thu, 16 Sep 2004 10:02:20 +0200
 From: Leroy van Logchem <leroy.vanlogchem@wldelft.nl>
 To: Peter Pentchev <roam@ringlet.net>
 Subject: Re: kern/71778: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05,
  2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
 In-Reply-To: <20040916004037.GL1001@straylight.m.ringlet.net>
 
 Peter Pentchev wrote:
 
 >On Wed, Sep 15, 2004 at 09:53:59PM +0000, Leroy R. van Logchem wrote:
 > 
 >
 >>>Number:         71778
 >>>Category:       kern
 >>>Synopsis:       5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05, 2 ch, 
 >>>256 CCBs, Protocol I2O while 4.10-RELEASE can use it
 >>>Originator:     Leroy R. van Logchem
 >>>     
 >>>
 >[snip]
 > 
 >
 >>Dmesg output captured using the live-cd:
 >>   
 >>
 >
 >Could you also provide the output of 'pnpinfo' and 'pciconf -lv' from
 >the live CD's shell prompt?
 >
 >G'luck,
 >Peter
 > 
 >
 Hi Peter,
 
 Thanks for looking at the PR since it would be greatly appricated when 
 this works.
 
 Output of 'pciconf -lv':
 ------------------------
 
 hostb0@pci0:0:0:        class=0x060000 card=0x358015d9 chip=0x254c8086 
 rev=0x01 hdr=0x00
   class    = bridge
   subclass = HOST-PCI
 none0@pci0:0:1: class=0xff0000 card=0x358015d9 chip=0x25418086 rev=0x01 
 hdr=0x00
 pcib1@pci0:2:0: class=0x060400 card=0x00000000 chip=0x25438086 rev=0x01 
 hdr=0x01
   class    = bridge
   subclass = PCI-PCI
 uhci0@pci0:29:0:        class=0x0c0300 card=0x358015d9 chip=0x24828086 
 rev=0x02 hdr=0x00
   class    = serial bus
   subclass = USB
 uhci1@pci0:29:1:        class=0x0c0300 card=0x358015d9 chip=0x24848086 
 rev=0x02 hdr=0x00
   class    = serial bus
   subclass = USB
 uhci2@pci0:29:2:        class=0x0c0300 card=0x358015d9 chip=0x24878086 
 rev=0x02 hdr=0x00
   class    = serial bus
   subclass = USB
 pcib4@pci0:30:0:        class=0x060400 card=0x00000000 chip=0x244e8086 
 rev=0x42 hdr=0x01
   class    = bridge
   subclass = PCI-PCI
 isab0@pci0:31:0:        class=0x060100 card=0x00000000 chip=0x24808086 
 rev=0x02 hdr=0x00
   class    = bridge
   subclass = PCI-ISA
 atapci0@pci0:31:1:      class=0x01018a card=0x358015d9 chip=0x248b8086 
 rev=0x02 hdr=0x00
   class    = mass storage
   subclass = ATA
 none1@pci0:31:3:        class=0x0c0500 card=0x358015d9 chip=0x24838086 
 rev=0x02 hdr=0x00
   class    = serial bus
   subclass = SMBus
 none2@pci1:28:0:        class=0x080020 card=0x358015d9 chip=0x14618086 
 rev=0x04 hdr=0x00
   class    = base peripheral
   subclass = interrupt controller
 pcib2@pci1:29:0:        class=0x060400 card=0x00000050 chip=0x14608086 
 rev=0x04 hdr=0x01
   class    = bridge
   subclass = PCI-PCI
 none3@pci1:30:0:        class=0x080020 card=0x358015d9 chip=0x14618086 
 rev=0x04 hdr=0x00
   class    = base peripheral
   subclass = interrupt controller
 pcib3@pci1:31:0:        class=0x060400 card=0x00000050 chip=0x14608086 
 rev=0x04 hdr=0x01
   class    = bridge
   subclass = PCI-PCI
 em0@pci2:3:0:   class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01 
 hdr=0x00
   class    = network
   subclass = ethernet
 em1@pci2:3:1:   class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01 
 hdr=0x00
   class    = network
   subclass = ethernet
 asr0@pci3:3:0:  class=0x010400 card=0xc0341044 chip=0xa5111044 rev=0x01 
 hdr=0x00
   class    = mass storage
   subclass = RAID
 none4@pci4:1:0: class=0x030000 card=0x00081002 chip=0x47521002 rev=0x27 
 hdr=0x00
   class    = display
   subclass = VGA
 
 Output of 'pnpinfo':
 --------------------
 Checking for Plug-n-Play devices...
 No Plug-n-Play devices were found
 
 
 Anymore information needed?
 
 Best regards,
 Leroy
 
 
 
 ----- End forwarded message -----

From: Leroy van Logchem <leroy.vanlogchem@wldelft.nl>
To: freebsd-gnats-submit@freebsd.org, Leroy.vanLogchem@wldelft.nl
Cc:  
Subject: Re: kern/71778: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05,
 2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
Date: Thu, 07 Oct 2004 15:33:19 +0200

 Tried 5.3-BETA7 still no disks found.
 

From: Leroy van Logchem <leroy.vanlogchem@wldelft.nl>
To: freebsd-gnats-submit@freebsd.org, Leroy.vanLogchem@wldelft.nl
Cc:  
Subject: Re: kern/71778: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05,
 2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
Date: Thu, 21 Oct 2004 13:27:32 +0200

 Tried 5.3-RC1 today. Something changed this time :) It *does* show the 
 drives in the bootloader and when I issue a 'lsdev' at the prompt it 
 lists them all. But the installer still says "No drives found".
 

From: Leroy van Logchem <leroy.vanlogchem@wldelft.nl>
To: freebsd-gnats-submit@freebsd.org, Leroy.vanLogchem@wldelft.nl
Cc:  
Subject: Re: kern/71778: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05,
 2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
Date: Wed, 03 Nov 2004 16:32:40 +0100

 Tried to boot the 386 disc1 iso of FreeBSD-5.3-RC2. When using verbose 
 booting the screen is filled with:
 
 ...
 (probe7:asr0:1:0:0): Request Command
 (probe7:asr0:1:0:0): Retrying Command
 ...
 
 These messages keep on being produced and the raid cabinets leds are 
 very busy.
 The SCSI bios and BTX loader did see the drives just like RC1.
 

From: Leroy van Logchem <leroy.vanlogchem@wldelft.nl>
To: freebsd-gnats-submit@freebsd.org, Leroy.vanLogchem@wldelft.nl
Cc: l.farr@gunfright.epcdirect.co.uk, ken@kdm.org, gibbs@scsiguy.com,
	scottl@samsco.org
Subject: Re: kern/71778: 5.3-RELEASE can't use IFT ES A08U-G on Adaptec 2015S
 while 4.10-R can
Date: Fri, 12 Nov 2004 09:58:51 +0100

 Another update, now using 5.3-RELEASE I can use the interal RAID-1 device:
 
 ses0 at asr0 bus 0 target 6 lun 0
 ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device 
 ses0: SAF-TE Compliant Device
 da0 at asr0 bus 0 target 0 lun 0
 da0: <ADAPTEC RAID-1 3B0A> Fixed Direct Access SCSI-2 device 
 da0: Tagged Queueing Enabled
 da0: 35003MB (71686144 512 byte sectors: 255H 63S/T 4462C)
 
 
 But when I attach the external Eonstor A08 raid cabinet (IFT ES A08U-G) 
 none of the devices are found.
 Sorry to repeat but the bios and loader (lsdev -v) do see the devices. 
 After booting no geoms/devices have been created.
 
 All information is now hosted here:
 
 http://cybercon.info/kern_71778/4.10-RELEASE.camcontrol-EonStore_connected
 http://cybercon.info/kern_71778/4.10-RELEASE.dmesg-EonStore_connected
 http://cybercon.info/kern_71778/4.10-RELEASE.pciconf-EonStore_connected
 http://cybercon.info/kern_71778/5.3-RELEASE.camcontrol-EonStore_connected
 http://cybercon.info/kern_71778/5.3-RELEASE.camcontrol-EonStore_disconnected
 http://cybercon.info/kern_71778/5.3-RELEASE.dmesg-EonStore_connected
 http://cybercon.info/kern_71778/5.3-RELEASE.dmesg-EonStore_disconnected
 http://cybercon.info/kern_71778/5.3-RELEASE.pciconf-EonStore_connected
 http://cybercon.info/kern_71778/5.3-RELEASE.pciconf-EonStore_disconnected
 
 ( the vendor and device strings do not show with pciconf -l -v using the 
 live cd, why might that be?)
 
 Leroy
 

From: Leroy van Logchem <leroy.vanlogchem@wldelft.nl>
To: freebsd-gnats-submit@freebsd.org, Leroy.vanLogchem@wldelft.nl
Cc:  
Subject: Re: kern/71778: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05, 2
	ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
Date: Thu, 20 Jan 2005 10:21:27 +0100

 The raid cabinets are working now using 5.3-RELEASE-p5 after a bios
 downgrade on the servers mainboard.
 
 I guess it can be closed with the conclusion that if you use Supermicro
 6013-P8 servers with the AIC-7902 (PCI-X) and ZCR 2015S addon you have
 to bring the bios down to version 1.5 instead of 1.6. (Meanwhile we are
 waiting for a reaction from Supermicro about what the changes really are
 in 1.6)
 
 Thanks to all people who have send my suggestions and tips in general!
 
State-Changed-From-To: open->closed 
State-Changed-By: linimon 
State-Changed-When: Mon Oct 24 06:59:30 GMT 2005 
State-Changed-Why:  
Submitter notes that this problem was fixed by downgrading the BIOS, so 
this is a problem particular to one BIOS revision. 

http://www.freebsd.org/cgi/query-pr.cgi?pr=71778 
>Unformatted:
