From hsu@news.bbnetworks.net  Mon Sep  9 21:49:22 2002
Return-Path: <hsu@news.bbnetworks.net>
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 6120F37B400
	for <FreeBSD-gnats-submit@freebsd.org>; Mon,  9 Sep 2002 21:49:22 -0700 (PDT)
Received: from news.bbnetworks.net (news.bbnetworks.net [212.16.96.3])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 5FDA643E6A
	for <FreeBSD-gnats-submit@freebsd.org>; Mon,  9 Sep 2002 21:49:21 -0700 (PDT)
	(envelope-from hsu@news.bbnetworks.net)
Received: from news.bbnetworks.net (localhost [127.0.0.1])
	by news.bbnetworks.net (8.11.6/8.11.3) with ESMTP id g8A4nIX62945
	for <FreeBSD-gnats-submit@freebsd.org>; Tue, 10 Sep 2002 07:49:19 +0300 (EEST)
	(envelope-from hsu@news.bbnetworks.net)
Received: (from hsu@localhost)
	by news.bbnetworks.net (8.12.5/8.12.5/Submit) id g8A4nHgB062943;
	Tue, 10 Sep 2002 07:49:17 +0300 (EEST)
Message-Id: <200209100449.g8A4nHgB062943@news.bbnetworks.net>
Date: Tue, 10 Sep 2002 07:49:17 +0300 (EEST)
From: Heikki Suonsivu <hsu@bbnetworks.net>
Reply-To: Heikki Suonsivu <hsu@bbnetworks.net>
To: FreeBSD-gnats-submit@freebsd.org
Cc:
Subject: Dell Inspiron 5000e hangs when using Orinoco or Cisco WLAN cards
X-Send-Pr-Version: 3.113
X-GNATS-Notify:

>Number:         42621
>Category:       kern
>Synopsis:       Dell Inspiron 5000e hangs when using Orinoco or Cisco WLAN cards
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    imp
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Mon Sep 09 21:50:04 PDT 2002
>Closed-Date:    Fri May 13 14:06:50 MDT 2011
>Last-Modified:  Fri May 13 14:06:50 MDT 2011
>Originator:     Heikki Suonsivu
>Release:        FreeBSD 4.5-STABLE i386
>Organization:
bbnetworks
>Environment:

System: FreeBSD news.bbnetworks.net 4.5-STABLE FreeBSD 4.5-STABLE #1: Mon Mar 18 17:56:25 EET 2002 hsu@news.bbnetworks.net:/m/news/overview/obj/usr/src/sys/CAT i386

Dell Inspiron 5000e.  BIOS flashed to latest, 1600x1200 LCD.

dmesg:

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.7-PRERELEASE #0: Mon Sep  9 05:29:29 EEST 2002
    root@:/usr/obj/usr/src/sys/LAPTOP
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (696.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 201261056 (196544K bytes)
avail memory = 190623744 (186156K bytes)
Preloaded elf kernel "kernel" at 0xc04f6000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdf50
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c46 graphics accelerator> at 0.0 irq 11
pci_cfgintr_linked: linked (60) to hard-routed irq 11
pci_cfgintr: 0:4 INTA routed to irq 11
pcic0: <TI PCI-1225 PCI-CardBus Bridge> mem 0x88000000-0x88000fff irq 11 at device 4.0 on pci0
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pci_cfgintr_linked: linked (60) to hard-routed irq 11
pci_cfgintr: 0:4 INTA routed to irq 11
pcic1: <TI PCI-1225 PCI-CardBus Bridge> mem 0x88001000-0x88001fff irq 11 at device 4.1 on pci0
pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pccard1: <PC Card bus (classic)> on pcic1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 5 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0
chip2: <ESS Technology Maestro 2E Audio controller> port 0x1400-0x14ff irq 5 at device 8.0 on pci0
orm0: <Option ROM> at iomem 0xc0000-0xcefff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
DUMMYNET initialized (011031)
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
ata1-slave: ATAPI identify retries exceeded
pccard: card inserted, slot 0
ad0: 38154MB <IC25N040ATCS04-0> [77520/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
ep0: <3Com 3C574> at port 0x240-0x25f irq 11 flags 0x1 slot 0 on pccard0
ep0: Ethernet address 00:50:04:58:99:32

>Description:

When inserting originoco silver or cisco aironet 340 WLAN cards, the
computer hangs up after initializing the card:

kernel: pccard: card inserted, slot 0
syslog: pccardd[47]: Card "Lucent Technologies"("WaveLAN/IEEE") [Version 01.01] []
syslog: matched "Lucent Technologies" ("WaveLAN/IEEE") [(null)] [(null)]
syslog: pccardd[47]: Using I/O addr 0x240, size 64
syslog: pccardd[47]: Setting config reg at offs 0x3e0 to 0x41, Reset time = 50 ms
syslog: pccardd[47]: Assigning I/O window 0, start 0x240, size 0x40 flags 0x5
syslog: pccardd[47]: Assign wi0, io 0x240-0x27f, mem 0x0, 0 bytes, irq 11, flags 0
kernel: wi0 at port 0x240-0x27f irq 11 slot 0 on pccard0
kernel: wi0 802.11 address: 00:xx:xx:xx:xx:xx

And the system locks up at this point.

Assuming this could be irq problem, I tried removing all other irqs
except 10 from pccard.conf, but pccardd insist on using 11.  -i 10 on
command like does change the situation.

I have tried kernel options listed in wi manual page, with no help (other
than messing up the kernel more).

On windows, lucent (orinoco) card shows at I/O 1080-10BF, irq 10, and
works fine.  In windows IRQ 10 seems to be the only one actually
available, all the others are assigned to something.

3com 3C574 (ep) works fine, it also gets irq 11 assigned for it. 

I have used GENERIC kernel from 4.6.2, and -stable from 6th september
with my own kernel config and dell inspiron 5000e config I found in
FreeBSD laptop compatibility page, neither helped, same problem.

It cannot be wi only, as cisco aironet card uses an driver.

It cannot be for all pcmcia cards as 3c574 works.

>How-To-Repeat:

Plug in the card, it initializes and dies, hard reset is the only
option I have found.


>Fix:

>Release-Note:
>Audit-Trail:
Responsible-Changed-From-To: freebsd-bugs->imp 
Responsible-Changed-By: kris 
Responsible-Changed-When: Sun Jul 13 02:54:57 PDT 2003 
Responsible-Changed-Why:  
Assign to wi maintainer 

http://www.freebsd.org/cgi/query-pr.cgi?pr=42621 

From: John Baldwin <jhb@FreeBSD.org>
To: freebsd-gnats-submit@FreeBSD.org, hsu@bbnetworks.net
Cc:  
Subject: Re: kern/42621: Dell Inspiron 5000e hangs when using Orinoco or Cisco WLAN cards
Date: Wed, 23 Mar 2005 16:05:18 -0500

 Does this problem still persist?  I have been running current with NEWCARD on 
 a 5000e with wi(4) for years without any problems.
 
 -- 
 John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
 "Power Users Use the Power to Serve"  =  http://www.FreeBSD.org

From: Heikki Suonsivu <hsu@bbnetworks.net>
To: John Baldwin <jhb@FreeBSD.org>
Cc: freebsd-gnats-submit@FreeBSD.org
Subject: Re: kern/42621: Dell Inspiron 5000e hangs when using Orinoco or Cisco
 WLAN cards
Date: Thu, 24 Mar 2005 16:41:38 +0200

 John Baldwin wrote:
 > Does this problem still persist?  I have been running current with NEWCARD on 
 > a 5000e with wi(4) for years without any problems.
 
 I do not have a 5000e any more.  I think I get a panic or hangup if I 
 insert lucent or prism card into a compaq N620c, but I have to check 
 this, as it was couple of months ago when I tested, and I'm currently 
 using a card with atheros chipset.
 

From: John Baldwin <jhb@FreeBSD.org>
To: Heikki Suonsivu <hsu@bbnetworks.net>
Cc: freebsd-gnats-submit@FreeBSD.org
Subject: Re: kern/42621: Dell Inspiron 5000e hangs when using Orinoco or Cisco WLAN cards
Date: Thu, 24 Mar 2005 10:46:29 -0500

 On Thursday 24 March 2005 09:41 am, Heikki Suonsivu wrote:
 > John Baldwin wrote:
 > > Does this problem still persist?  I have been running current with
 > > NEWCARD on a 5000e with wi(4) for years without any problems.
 >
 > I do not have a 5000e any more.  I think I get a panic or hangup if I
 > insert lucent or prism card into a compaq N620c, but I have to check
 > this, as it was couple of months ago when I tested, and I'm currently
 > using a card with atheros chipset.
 
 Is it ok to close the PR then?
 
 -- 
 John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
 "Power Users Use the Power to Serve"  =  http://www.FreeBSD.org

From: Heikki Suonsivu <heikki.suonsivu@wlansystems.com>
To: John Baldwin <jhb@FreeBSD.org>
Cc: Heikki Suonsivu <hsu@bbnetworks.net>,
	freebsd-gnats-submit@FreeBSD.org
Subject: Re: kern/42621: Dell Inspiron 5000e hangs when using Orinoco or Cisco
 WLAN cards
Date: Fri, 25 Mar 2005 15:43:59 +0200

 John Baldwin wrote:
 
 >On Thursday 24 March 2005 09:41 am, Heikki Suonsivu wrote:
 >  
 >
 >>John Baldwin wrote:
 >>    
 >>
 >>>Does this problem still persist?  I have been running current with
 >>>NEWCARD on a 5000e with wi(4) for years without any problems.
 >>>      
 >>>
 >>I do not have a 5000e any more.  I think I get a panic or hangup if I
 >>insert lucent or prism card into a compaq N620c, but I have to check
 >>this, as it was couple of months ago when I tested, and I'm currently
 >>using a card with atheros chipset.
 >>    
 >>
 >
 >Is it ok to close the PR then?
 >
 >  
 >
 It still does not seem to work, though it just fails, without lockup.
 
 pcib2: device pccard0 requested decoded memory range 0x90000000-0x901fffff
 pccard0: CIS version PC Card Standard 5.0
 pccard0: CIS info: Lucent Technologies, WaveLAN/IEEE, Version 01.01,
 pccard0: Manufacturer code 0x156, product 0x2
 pccard0: function 0: network adapter, ccr addr 3e0 mask 1
 pccard0: function 0, config table entry 1: I/O card; irq mask ffff; 
 iomask 6, iospace 0-3f; io16 irqpulse irqlevel
 pcib2: device pccard0 requested decoded memory range 0x90000000-0x901fffff
 wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq 10 
 function 0 config 1 on pccard0
 wi0: [MPSAFE]
 wi0: timeout in wi_cmd 0x0000; event status 0x8000
 wi0: timeout in wi_cmd 0x0000; event status 0x8000
 wi0: timeout in wi_cmd 0x0000; event status 0x8000
 : init failed
 device_attach: wi0 attach returned 6
 pcib2: device cardbus0 requested decoded memory range 0x90000000-0x901fffff
 pcib2: device cardbus0 requested decoded memory range 0x90000000-0x901fffff
 found-> vendor=0x168c, dev=0x0013, revid=0x01
         bus=3, slot=0, func=0
         class=02-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0000, statreg=0x0290, cachelnsz=8 (dwords)
         lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x1c 
 (7000 ns)
         intpin=a, irq=10
         powerspec 2  supports D0 D3  current D0
 ath0: <Atheros 5212> mem 0x90010000-0x9001ffff irq 10 at device 0.0 on 
 cardbus0
 pcib2: device ath0 requested decoded memory range 0x90010000-0x9001ffff
 ath0: [MPSAFE]
 ath0: mac 5.9 phy 4.3 5ghz radio 4.6
 ath0: bpf attached
 ath0: Ethernet address: 00:0f:3d:87:1c:df
 ath0: bpf attached
 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 
 24Mbps 36Mbps 48Mbps 54Mbps
 ath0: bpf attached
 

From: John Baldwin <jhb@FreeBSD.org>
To: Heikki Suonsivu <heikki.suonsivu@wlansystems.com>
Cc: Heikki Suonsivu <hsu@bbnetworks.net>,
	freebsd-gnats-submit@FreeBSD.org, "M. Warner Losh" <imp@bsdimp.com>
Subject: Re: kern/42621: Dell Inspiron 5000e hangs when using Orinoco or Cisco WLAN cards
Date: Fri, 25 Mar 2005 15:04:11 -0500

 On Friday 25 March 2005 08:43 am, Heikki Suonsivu wrote:
 > John Baldwin wrote:
 > >On Thursday 24 March 2005 09:41 am, Heikki Suonsivu wrote:
 > >>John Baldwin wrote:
 > >>>Does this problem still persist?  I have been running current with
 > >>>NEWCARD on a 5000e with wi(4) for years without any problems.
 > >>
 > >>I do not have a 5000e any more.  I think I get a panic or hangup if I
 > >>insert lucent or prism card into a compaq N620c, but I have to check
 > >>this, as it was couple of months ago when I tested, and I'm currently
 > >>using a card with atheros chipset.
 > >
 > >Is it ok to close the PR then?
 >
 > It still does not seem to work, though it just fails, without lockup.
 >
 > pcib2: device pccard0 requested decoded memory range 0x90000000-0x901fffff
 > pccard0: CIS version PC Card Standard 5.0
 > pccard0: CIS info: Lucent Technologies, WaveLAN/IEEE, Version 01.01,
 > pccard0: Manufacturer code 0x156, product 0x2
 > pccard0: function 0: network adapter, ccr addr 3e0 mask 1
 > pccard0: function 0, config table entry 1: I/O card; irq mask ffff;
 > iomask 6, iospace 0-3f; io16 irqpulse irqlevel
 > pcib2: device pccard0 requested decoded memory range 0x90000000-0x901fffff
 > wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq 10
 > function 0 config 1 on pccard0
 > wi0: [MPSAFE]
 > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 >
 > : init failed
 >
 > device_attach: wi0 attach returned 6
 
 Hmm, maybe Warner can look at this.  It looks like it is getting close though, 
 since if the I/O ports weren't mapped it would return 0xffff rather than 
 0x8000.
 
 -- 
 John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
 "Power Users Use the Power to Serve"  =  http://www.FreeBSD.org

From: "M. Warner Losh" <imp@bsdimp.com>
To: jhb@freebsd.org
Cc: heikki.suonsivu@wlansystems.com, hsu@bbnetworks.net,
	freebsd-gnats-submit@freebsd.org
Subject: Re: kern/42621: Dell Inspiron 5000e hangs when using Orinoco or
 Cisco WLAN cards
Date: Fri, 25 Mar 2005 13:23:04 -0700 (MST)

 In message: <200503251504.11612.jhb@FreeBSD.org>
             John Baldwin <jhb@FreeBSD.org> writes:
 : On Friday 25 March 2005 08:43 am, Heikki Suonsivu wrote:
 : > John Baldwin wrote:
 : > >On Thursday 24 March 2005 09:41 am, Heikki Suonsivu wrote:
 : > >>John Baldwin wrote:
 : > >>>Does this problem still persist?  I have been running current with
 : > >>>NEWCARD on a 5000e with wi(4) for years without any problems.
 : > >>
 : > >>I do not have a 5000e any more.  I think I get a panic or hangup if I
 : > >>insert lucent or prism card into a compaq N620c, but I have to check
 : > >>this, as it was couple of months ago when I tested, and I'm currently
 : > >>using a card with atheros chipset.
 : > >
 : > >Is it ok to close the PR then?
 : >
 : > It still does not seem to work, though it just fails, without lockup.
 : >
 : > pcib2: device pccard0 requested decoded memory range 0x90000000-0x901fffff
 : > pccard0: CIS version PC Card Standard 5.0
 : > pccard0: CIS info: Lucent Technologies, WaveLAN/IEEE, Version 01.01,
 : > pccard0: Manufacturer code 0x156, product 0x2
 : > pccard0: function 0: network adapter, ccr addr 3e0 mask 1
 : > pccard0: function 0, config table entry 1: I/O card; irq mask ffff;
 : > iomask 6, iospace 0-3f; io16 irqpulse irqlevel
 : > pcib2: device pccard0 requested decoded memory range 0x90000000-0x901fffff
 : > wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq 10
 : > function 0 config 1 on pccard0
 : > wi0: [MPSAFE]
 : > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 : > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 : > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 : >
 : > : init failed
 : >
 : > device_attach: wi0 attach returned 6
 : 
 : Hmm, maybe Warner can look at this.  It looks like it is getting close though, 
 : since if the I/O ports weren't mapped it would return 0xffff rather than 
 : 0x8000.
 
 The card isn't coming up, for reasons unknown. :-(
 
 Warner

From: John Baldwin <jhb@FreeBSD.org>
To: heikki.suonsivu@wlansystems.com
Cc: hsu@bbnetworks.net, freebsd-gnats-submit@FreeBSD.org,
	"M. Warner Losh" <imp@bsdimp.com>
Subject: Re: kern/42621: Dell Inspiron 5000e hangs when using Orinoco or Cisco WLAN cards
Date: Fri, 25 Mar 2005 15:51:17 -0500

 On Friday 25 March 2005 03:23 pm, M. Warner Losh wrote:
 > In message: <200503251504.11612.jhb@FreeBSD.org>
 >
 >             John Baldwin <jhb@FreeBSD.org> writes:
 > : On Friday 25 March 2005 08:43 am, Heikki Suonsivu wrote:
 > : > John Baldwin wrote:
 > : > >On Thursday 24 March 2005 09:41 am, Heikki Suonsivu wrote:
 > : > >>John Baldwin wrote:
 > : > >>>Does this problem still persist?  I have been running current with
 > : > >>>NEWCARD on a 5000e with wi(4) for years without any problems.
 > : > >>
 > : > >>I do not have a 5000e any more.  I think I get a panic or hangup if I
 > : > >>insert lucent or prism card into a compaq N620c, but I have to check
 > : > >>this, as it was couple of months ago when I tested, and I'm currently
 > : > >>using a card with atheros chipset.
 > : > >
 > : > >Is it ok to close the PR then?
 > : >
 > : > It still does not seem to work, though it just fails, without lockup.
 > : >
 > : > pcib2: device pccard0 requested decoded memory range
 > : > 0x90000000-0x901fffff pccard0: CIS version PC Card Standard 5.0
 > : > pccard0: CIS info: Lucent Technologies, WaveLAN/IEEE, Version 01.01,
 > : > pccard0: Manufacturer code 0x156, product 0x2
 > : > pccard0: function 0: network adapter, ccr addr 3e0 mask 1
 > : > pccard0: function 0, config table entry 1: I/O card; irq mask ffff;
 > : > iomask 6, iospace 0-3f; io16 irqpulse irqlevel
 > : > pcib2: device pccard0 requested decoded memory range
 > : > 0x90000000-0x901fffff wi0: <Lucent Technologies WaveLAN/IEEE> at port
 > : > 0x100-0x13f irq 10 function 0 config 1 on pccard0
 > : > wi0: [MPSAFE]
 > : > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 > : > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 > : > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 > : >
 > : > : init failed
 > : >
 > : > device_attach: wi0 attach returned 6
 > :
 > : Hmm, maybe Warner can look at this.  It looks like it is getting close
 > : though, since if the I/O ports weren't mapped it would return 0xffff
 > : rather than 0x8000.
 >
 > The card isn't coming up, for reasons unknown. :-(
 
 Does this card work ok in other laptops?
 
 -- 
 John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
 "Power Users Use the Power to Serve"  =  http://www.FreeBSD.org

From: "M. Warner Losh" <imp@bsdimp.com>
To: jhb@FreeBSD.org
Cc: heikki.suonsivu@wlansystems.com, hsu@bbnetworks.net,
	freebsd-gnats-submit@FreeBSD.org
Subject: Re: kern/42621: Dell Inspiron 5000e hangs when using Orinoco or
 Cisco WLAN cards
Date: Fri, 25 Mar 2005 14:32:54 -0700 (MST)

 In message: <200503251551.17741.jhb@FreeBSD.org>
             John Baldwin <jhb@FreeBSD.org> writes:
 : On Friday 25 March 2005 03:23 pm, M. Warner Losh wrote:
 : > In message: <200503251504.11612.jhb@FreeBSD.org>
 : >
 : >             John Baldwin <jhb@FreeBSD.org> writes:
 : > : On Friday 25 March 2005 08:43 am, Heikki Suonsivu wrote:
 : > : > John Baldwin wrote:
 : > : > >On Thursday 24 March 2005 09:41 am, Heikki Suonsivu wrote:
 : > : > >>John Baldwin wrote:
 : > : > >>>Does this problem still persist?  I have been running current with
 : > : > >>>NEWCARD on a 5000e with wi(4) for years without any problems.
 : > : > >>
 : > : > >>I do not have a 5000e any more.  I think I get a panic or hangup if I
 : > : > >>insert lucent or prism card into a compaq N620c, but I have to check
 : > : > >>this, as it was couple of months ago when I tested, and I'm currently
 : > : > >>using a card with atheros chipset.
 : > : > >
 : > : > >Is it ok to close the PR then?
 : > : >
 : > : > It still does not seem to work, though it just fails, without lockup.
 : > : >
 : > : > pcib2: device pccard0 requested decoded memory range
 : > : > 0x90000000-0x901fffff pccard0: CIS version PC Card Standard 5.0
 : > : > pccard0: CIS info: Lucent Technologies, WaveLAN/IEEE, Version 01.01,
 : > : > pccard0: Manufacturer code 0x156, product 0x2
 : > : > pccard0: function 0: network adapter, ccr addr 3e0 mask 1
 : > : > pccard0: function 0, config table entry 1: I/O card; irq mask ffff;
 : > : > iomask 6, iospace 0-3f; io16 irqpulse irqlevel
 : > : > pcib2: device pccard0 requested decoded memory range
 : > : > 0x90000000-0x901fffff wi0: <Lucent Technologies WaveLAN/IEEE> at port
 : > : > 0x100-0x13f irq 10 function 0 config 1 on pccard0
 : > : > wi0: [MPSAFE]
 : > : > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 : > : > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 : > : > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 : > : >
 : > : > : init failed
 : > : >
 : > : > device_attach: wi0 attach returned 6
 : > :
 : > : Hmm, maybe Warner can look at this.  It looks like it is getting close
 : > : though, since if the I/O ports weren't mapped it would return 0xffff
 : > : rather than 0x8000.
 : >
 : > The card isn't coming up, for reasons unknown. :-(
 : 
 : Does this card work ok in other laptops?
 
 Yes.  At least other similar cards do.
 
 Warner

From: John Baldwin <jhb@FreeBSD.org>
To: "M. Warner Losh" <imp@bsdimp.com>
Cc: heikki.suonsivu@wlansystems.com, hsu@bbnetworks.net,
	freebsd-gnats-submit@FreeBSD.org
Subject: Re: kern/42621: Dell Inspiron 5000e hangs when using Orinoco or Cisco WLAN cards
Date: Mon, 28 Mar 2005 14:16:42 -0500

 On Friday 25 March 2005 04:32 pm, M. Warner Losh wrote:
 > In message: <200503251551.17741.jhb@FreeBSD.org>
 >
 >             John Baldwin <jhb@FreeBSD.org> writes:
 > : On Friday 25 March 2005 03:23 pm, M. Warner Losh wrote:
 > : > In message: <200503251504.11612.jhb@FreeBSD.org>
 > : >
 > : >             John Baldwin <jhb@FreeBSD.org> writes:
 > : > : On Friday 25 March 2005 08:43 am, Heikki Suonsivu wrote:
 > : > : > John Baldwin wrote:
 > : > : > >On Thursday 24 March 2005 09:41 am, Heikki Suonsivu wrote:
 > : > : > >>John Baldwin wrote:
 > : > : > >>>Does this problem still persist?  I have been running current
 > : > : > >>> with NEWCARD on a 5000e with wi(4) for years without any
 > : > : > >>> problems.
 > : > : > >>
 > : > : > >>I do not have a 5000e any more.  I think I get a panic or hangup
 > : > : > >> if I insert lucent or prism card into a compaq N620c, but I have
 > : > : > >> to check this, as it was couple of months ago when I tested, and
 > : > : > >> I'm currently using a card with atheros chipset.
 > : > : > >
 > : > : > >Is it ok to close the PR then?
 > : > : >
 > : > : > It still does not seem to work, though it just fails, without
 > : > : > lockup.
 > : > : >
 > : > : > pcib2: device pccard0 requested decoded memory range
 > : > : > 0x90000000-0x901fffff pccard0: CIS version PC Card Standard 5.0
 > : > : > pccard0: CIS info: Lucent Technologies, WaveLAN/IEEE, Version
 > : > : > 01.01, pccard0: Manufacturer code 0x156, product 0x2
 > : > : > pccard0: function 0: network adapter, ccr addr 3e0 mask 1
 > : > : > pccard0: function 0, config table entry 1: I/O card; irq mask ffff;
 > : > : > iomask 6, iospace 0-3f; io16 irqpulse irqlevel
 > : > : > pcib2: device pccard0 requested decoded memory range
 > : > : > 0x90000000-0x901fffff wi0: <Lucent Technologies WaveLAN/IEEE> at
 > : > : > port 0x100-0x13f irq 10 function 0 config 1 on pccard0
 > : > : > wi0: [MPSAFE]
 > : > : > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 > : > : > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 > : > : > wi0: timeout in wi_cmd 0x0000; event status 0x8000
 > : > : >
 > : > : > : init failed
 > : > : >
 > : > : > device_attach: wi0 attach returned 6
 > : > :
 > : > : Hmm, maybe Warner can look at this.  It looks like it is getting
 > : > : close though, since if the I/O ports weren't mapped it would return
 > : > : 0xffff rather than 0x8000.
 > : >
 > : > The card isn't coming up, for reasons unknown. :-(
 > :
 > : Does this card work ok in other laptops?
 >
 > Yes.  At least other similar cards do.
 
 I mean this physical card.  I have two wi(4) cards that both work fine in my 
 5000e.  I'm curious if this physical card has a hardware problem of some 
 sort.
 
 -- 
 John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
 "Power Users Use the Power to Serve"  =  http://www.FreeBSD.org
State-Changed-From-To: open->closed 
State-Changed-By: imp 
State-Changed-When: Fri May 13 14:06:22 MDT 2011 
State-Changed-Why:  
Too old.  So many things have changed tht this likely is no longer 
relevant.  Refile if it is. 


http://www.freebsd.org/cgi/query-pr.cgi?pr=42621 
>Unformatted:
