From nobody@FreeBSD.org  Thu Nov  1 00:37:04 2012
Return-Path: <nobody@FreeBSD.org>
Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52])
	by hub.freebsd.org (Postfix) with ESMTP id 9542C37E
	for <freebsd-gnats-submit@FreeBSD.org>; Thu,  1 Nov 2012 00:37:04 +0000 (UTC)
	(envelope-from nobody@FreeBSD.org)
Received: from red.freebsd.org (red.freebsd.org [IPv6:2001:4f8:fff6::22])
	by mx1.freebsd.org (Postfix) with ESMTP id 7C4948FC12
	for <freebsd-gnats-submit@FreeBSD.org>; Thu,  1 Nov 2012 00:37:04 +0000 (UTC)
Received: from red.freebsd.org (localhost [127.0.0.1])
	by red.freebsd.org (8.14.5/8.14.5) with ESMTP id qA10b4gU022867
	for <freebsd-gnats-submit@FreeBSD.org>; Thu, 1 Nov 2012 00:37:04 GMT
	(envelope-from nobody@red.freebsd.org)
Received: (from nobody@localhost)
	by red.freebsd.org (8.14.5/8.14.5/Submit) id qA10b4pV022866;
	Thu, 1 Nov 2012 00:37:04 GMT
	(envelope-from nobody)
Message-Id: <201211010037.qA10b4pV022866@red.freebsd.org>
Date: Thu, 1 Nov 2012 00:37:04 GMT
From: "M." <michael.schuh@gmail.com>
To: freebsd-gnats-submit@FreeBSD.org
Subject: ACHI/ATA_CAM doesn't find any SATA Disk on ICH7 - Dell SC430
X-Send-Pr-Version: www-3.1
X-GNATS-Notify:

>Number:         173251
>Category:       kern
>Synopsis:       [ata] ACHI/ATA_CAM doesn't find any SATA Disk on ICH7 - Dell SC430
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    mav
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Thu Nov 01 00:40:00 UTC 2012
>Closed-Date:    
>Last-Modified:  Thu Nov  8 13:50:00 UTC 2012
>Originator:     M.
>Release:        9-STABLE/9.1-RC2/9.1-PRERELEASE
>Organization:
http://michael-schuh.net
>Environment:
FreeBSD blaster.michael-schuh.net 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #1: Thu Nov  1 01:01:29 CET 2012     root@blaster.michael-schuh.net:/usr/obj/usr/src/sys/MYGENERIC  amd64

>Description:
The (default) AHCI/ATA_CAM or ata-ich drivers doesn't see any SATA-Disk or Optical drive
at the Controller.

The Machine is an DELL SC430.  For more on the HArdware see the dmesg.

This got tested with the following Kinds of FreeBSD:
9.0 RELEASE i386
9.0 RELEASE amd64
9-STABLE i386
9-STABLE amd64

May be also 8.3-RELEASE will be affected?

The above uname is from a GENERIC Kernel reverted to the old ATA drivers, like described in 
UPDATING entry 20110424for ATA/AHCI.

This behavior is valid for both configs, GENERIC with AHCI and ATA_CAM and the one without those options asa described in the UPDATING file.

The drives get properly detected by the Systems BIOS.
The Systems BIOS is already updated to the last Version.
The drives get detected and can get accessed by other Operating Systems.
the drives get detected and can get accessed by drive diagnostic tools under FreeDOS and unter Linux.

The entire machien is known to working very well. Until today the Machine was running under Linux debian. No Hardware Errors known.

If more testing/help is needed to figure the source of this error, please let me know.

Another sideeffect: 
#glabel create swap ad0s1b
or resp.
# glabel create swap ada0s1b
is not persistend written to the disk, after a reboot the label is gone.
i tested this with exactly the same Disk on another System that is exactly the same way installed and configure but newer hardware. 


etract of
#pciconf -lv 
isab0@pci0:0:31:0:      class=0x060100 card=0x00000000 chip=0x27b88086 rev=0x01 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801GB/GR (ICH7 Family) LPC Interface Bridge'
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:1:    class=0x01018a card=0x01ae1028 chip=0x27df8086 rev=0x01 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) IDE Controller'
    class      = mass storage
    subclass   = ATA
atapci1@pci0:0:31:2:    class=0x01018f card=0x01ae1028 chip=0x27c08086 rev=0x01 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH7 Family SATA IDE Controller'
    class      = mass storage
    subclass   = ATA
none0@pci0:0:31:3:      class=0x0c0500 card=0x01ae1028 chip=0x27da8086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family SMBus Controller'
    class      = serial bus

#dmesg

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-PRERELEASE #1: Thu Nov  1 01:01:29 CET 2012
    root@blaster.michael-schuh.net:/usr/obj/usr/src/sys/MYGENERIC amd64
can't re-use a leaf (geom_label)!
module_register: module g_label already exists!
Module g_label failed to register: 17
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (2992.56-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0xf62  Family = 0xf  Model = 0x6  Stepping = 2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe43d<SSE3,DTES64,MON,DS_CPL,VMX,CNXT-ID,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 3856138240 (3677 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <DELL   PESC430>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
Cuse4BSD v0.1.26 @ /dev/cuse
kbd1 at kbdmux0
acpi0: <DELL PESC430> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, f00000 (3) failed
acpi0: reservation of 1000000, eee8cc00 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xdcc0-0xdcdf mem 0xfea80000-0xfea9ffff,0xfeaa0000-0xfeabffff irq 16 at device 0.0 on pci1
em0: Using an MSI interrupt
em0: Ethernet address: 00:15:17:bb:22:f4
em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xdce0-0xdcff mem 0xfeac0000-0xfeadffff,0xfeae0000-0xfeafffff irq 17 at device 0.1 on pci1
em1: Using an MSI interrupt
em1: Ethernet address: 00:15:17:bb:22:f5
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xcc00-0xccff mem 0xfe7ff000-0xfe7fffff irq 16 at device 0.0 on pci3
re0: Using 1 MSI message
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 74:ea:3a:80:26:74
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004001> mem 0xfe6f0000-0xfe6fffff irq 17 at device 0.0 on pci4
bge0: CHIP ID 0x00004001; ASIC REV 0x04; CHIP REV 0x40; PCI-E
miibus1: <MII bus> on bge0
brgphy0: <BCM5750 1000BASE-T media interface> PHY 1 on miibus1
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:13:72:18:a6:11
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xff80-0xff9f irq 21 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xff60-0xff7f irq 22 at device 29.1 on pci0
usbus1 on uhci1

uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xff20-0xff3f irq 23 at device 29.3 on pci0
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 21 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
emu10kx0: <Creative SBLive! [CT4620]> port 0xbc60-0xbc7f irq 18 at device 2.0 on pci5
pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0
pcm0: <TriTech TR28023 AC97 Codec>
pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0
pci5: <input device> at device 2.1 (no driver attached)
vgapci0: <VGA-compatible display> port 0xbc80-0xbcff mem 0xfc000000-0xfdffffff,0xfe4c0000-0xfe4fffff at device 7.0 on pci5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf irq 20 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff,0xca000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x2ee offMax=0x6ea
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0

The GEOM class LABEL is already loaded.
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ad0: 190782MB <WDC WD2000BB-55GUA0 08.02D08> at ata0-master UDMA100 
ad1: 476940MB <Hitachi HDS725050KLAT80 K2AOAB0A> at ata0-slave UDMA100 
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 11689688 Hz quality 1000
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
Trying to mount root from ufs:/dev/ufsid/50911449207a744a [rw]...
ugen0.2: <Microsoft> at usbus0
ums0: <Microsoft Microsoft Basic Optical Mouse, class 0/0, rev 1.10/3.90, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen2.2: <GASIA> at usbus2
ukbd0: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 2> on usbus2
ugen0.3: <vendor 0x046a> at usbus0
kbd2 at ukbd0
ukbd2: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/2.20, addr 3> on usbus0
ums1: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 2> on usbus2
kbd3 at ukbd2
ums1: 5 buttons and [XYZ] coordinates ID=1
uhid0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/2.20, addr 3> on usbus0

>How-To-Repeat:
Install/boot with any provided (9.0 RELEASE onwards) CD/Memstick image and try to find any SATA Drive.
>Fix:
No idea - fix the source code for ?ata-ich? or according sources for SATA drive detection and recompile kernel - reboot - look what you get. :-)

>Release-Note:
>Audit-Trail:

From: Michael Schuh <michael.schuh@gmail.com>
To: bug-followup@freebsd.org
Cc:  
Subject: Re: kern/173251: ACHI/ATA_CAM doesn't find any SATA Disk on ICH7 -
 Dell SC430
Date: Thu, 1 Nov 2012 06:10:29 +0100

 --485b390f7f22b4a6d604cd680940
 Content-Type: text/plain; charset=ISO-8859-1
 
 The RELEASE 8.3 is also affected.  No SATA drives found.
 
 With RELEASE 8.2 the disks get detected correctly.
 
 --485b390f7f22b4a6d604cd680940
 Content-Type: text/html; charset=ISO-8859-1
 Content-Transfer-Encoding: quoted-printable
 
 The RELEASE 8.3 is also affected. =A0No SATA drives found.<div><br>
 <div>With RELEASE 8.2 the disks get detected correctly.</div></div>
 
 --485b390f7f22b4a6d604cd680940--

From: Michael Schuh <michael.schuh@gmail.com>
To: bug-followup@freebsd.org
Cc:  
Subject: Re: kern/173251: ACHI/ATA_CAM doesn't find any SATA Disk on ICH7 -
 Dell SC430
Date: Thu, 1 Nov 2012 07:55:08 +0100

 2012/11/1 Michael Schuh <michael.schuh@gmail.com>
 >
 > The RELEASE 8.3 is also affected.  No SATA drives found.
 >
 > With RELEASE 8.2 the disks get detected correctly.
 
 i patched /usr/src/sys/dev/ata/chipsets/ata-intel.c.
 I reverted to the definitions of RELEASE 8.2 and now i can access
 all my drives.
 
 i added the patch to this message. ata-intel.c is my version,
 ata-intel.c.org the actual.
 
 No compiling errors no Timeouts.
 Peakperformance of 90MByte/S could getting reached without any errors.
 
 I am not really sure what my changed meaning in deep, but it seems to work
 correctly.
 
 probably a kernel hacker can supervise that.
 
 will be thankful for any feedback
 
 many thanks.

From: Michael Schuh <michael.schuh@gmail.com>
To: bug-followup@freebsd.org
Cc:  
Subject: Re: kern/173251: ACHI/ATA_CAM doesn't find any SATA Disk on ICH7 -
 Dell SC430
Date: Thu, 1 Nov 2012 08:09:51 +0100

 2012/11/1 Michael Schuh <michael.schuh@gmail.com>:
 > i patched /usr/src/sys/dev/ata/chipsets/ata-intel.c.
 umh, sorry - the patch got cutted off. so here
 
 [root@blaster]/usr/src/sys/dev/ata/chipsets# cat
 patch-82-alike-ata-intel-ich7.patch
 *** ata-intel.c.org     2012-11-01 06:48:06.000000000 +0100
 --- ata-intel.c 2012-11-01 07:05:51.000000000 +0100
 ***************
 *** 129,143 ****
        { ATA_I82801FB,     0,          0, 2, ATA_UDMA5, "ICH6" },
        { ATA_I82801FB_S1,  0, INTEL_AHCI, 0, ATA_SA150, "ICH6" },
        { ATA_I82801FB_R1,  0, INTEL_AHCI, 0, ATA_SA150, "ICH6" },
        { ATA_I82801FBM,    0, INTEL_AHCI, 0, ATA_SA150, "ICH6M" },
        { ATA_I82801GB,     0,          0, 1, ATA_UDMA5, "ICH7" },
 !      { ATA_I82801GB_S1,  0, INTEL_ICH7, 0, ATA_SA300, "ICH7" },
 !      { ATA_I82801GB_R1,  0, INTEL_AHCI, 0, ATA_SA300, "ICH7" },
        { ATA_I82801GB_AH,  0, INTEL_AHCI, 0, ATA_SA300, "ICH7" },
 !      { ATA_I82801GBM_S1, 0, INTEL_ICH7, 0, ATA_SA150, "ICH7M" },
 !      { ATA_I82801GBM_R1, 0, INTEL_AHCI, 0, ATA_SA150, "ICH7M" },
        { ATA_I82801GBM_AH, 0, INTEL_AHCI, 0, ATA_SA150, "ICH7M" },
        { ATA_I63XXESB2,    0,          0, 1, ATA_UDMA5, "63XXESB2" },
        { ATA_I63XXESB2_S1, 0,          0, 0, ATA_SA300, "63XXESB2" },
        { ATA_I63XXESB2_S2, 0, INTEL_AHCI, 0, ATA_SA300, "63XXESB2" },
        { ATA_I63XXESB2_R1, 0, INTEL_AHCI, 0, ATA_SA300, "63XXESB2" },
 --- 129,147 ----
        { ATA_I82801FB,     0,          0, 2, ATA_UDMA5, "ICH6" },
        { ATA_I82801FB_S1,  0, INTEL_AHCI, 0, ATA_SA150, "ICH6" },
        { ATA_I82801FB_R1,  0, INTEL_AHCI, 0, ATA_SA150, "ICH6" },
        { ATA_I82801FBM,    0, INTEL_AHCI, 0, ATA_SA150, "ICH6M" },
        { ATA_I82801GB,     0,          0, 1, ATA_UDMA5, "ICH7" },
 !      //{ ATA_I82801GB_S1,  0, INTEL_ICH7, 0, ATA_SA300, "ICH7" },
 !      { ATA_I82801GB_S1,  0,          0, 0, ATA_SA300, "ICH7" },
 !      //{ ATA_I82801GB_R1,  0, INTEL_AHCI, 0, ATA_SA300, "ICH7" },
 !      { ATA_I82801GB_R1,  0,          0, 0, ATA_SA300, "ICH7" },
        { ATA_I82801GB_AH,  0, INTEL_AHCI, 0, ATA_SA300, "ICH7" },
 !      //{ ATA_I82801GBM_S1, 0, INTEL_ICH7, 0, ATA_SA150, "ICH7M" },
 !      { ATA_I82801GBM_S1, 0,          0, 0, ATA_SA150, "ICH7M" },
 !      //{ ATA_I82801GBM_R1, 0, INTEL_AHCI, 0, ATA_SA150, "ICH7M" },
 !      { ATA_I82801GBM_R1, 0,          0, 0, ATA_SA150, "ICH7M" },
        { ATA_I82801GBM_AH, 0, INTEL_AHCI, 0, ATA_SA150, "ICH7M" },
        { ATA_I63XXESB2,    0,          0, 1, ATA_UDMA5, "63XXESB2" },
        { ATA_I63XXESB2_S1, 0,          0, 0, ATA_SA300, "63XXESB2" },
        { ATA_I63XXESB2_S2, 0, INTEL_AHCI, 0, ATA_SA300, "63XXESB2" },
        { ATA_I63XXESB2_R1, 0, INTEL_AHCI, 0, ATA_SA300, "63XXESB2" },

From: Michael Schuh <michael.schuh@gmail.com>
To: bug-followup@freebsd.org
Cc:  
Subject: Re: kern/173251: ACHI/ATA_CAM doesn't find any SATA Disk on ICH7 -
 Dell SC430
Date: Thu, 1 Nov 2012 18:49:24 +0100

 After another night with digging the Internet
 i found why the newer RELEASES will not find the SATA drives.
 
 "The BIOS has programmed the chip into IDE mode, not AHCI mode.  It seems
 to have also set up the AHCI BAR, but the majority of chips with this ID
 won't have been and so the ahci driver will fail with them. If the chip
 was in AHCI mode, the device ID would automatically have changed to
 0x27c1."
 
 
 Just this Machine has no BIOS-Options to manage the ICH controller Mode.
 It seems this caused the error, that the drives aren't visible for the
 AHCI-driver.
 
 So i ask, is there a solution/possibility to detect and change the working
 mode of this Controller from the Operating System base/Kernel?

From: Michael Schuh <michael.schuh@gmail.com>
To: bug-followup@freebsd.org
Cc:  
Subject: Re: kern/173251: ACHI/ATA_CAM doesn't find any SATA Disk on ICH7 -
 Dell SC430
Date: Thu, 1 Nov 2012 18:56:48 +0100

 2012/11/1 Michael Schuh <michael.schuh@gmail.com>:
 > After another night with digging the Internet
 > i found why the newer RELEASES will not find the SATA drives.
 >
 > "The BIOS has programmed the chip into IDE mode, not AHCI mode.  It seems
 > to have also set up the AHCI BAR, but the majority of chips with this ID
 > won't have been and so the ahci driver will fail with them. If the chip
 > was in AHCI mode, the device ID would automatically have changed to
 > 0x27c1."
 >
 >
 > Just this Machine has no BIOS-Options to manage the ICH controller Mode.
 > It seems this caused the error, that the drives aren't visible for the
 > AHCI-driver.
 >
 > So i ask, is there a solution/possibility to detect and change the working
 > mode of this Controller from the Operating System base/Kernel?
 
 http://rants.atmurray.net/2009/06/sata-ahci-mode-on-systems-without-bios.html
 
 <<< can we do this on/with FreeBSD?
 It seems that this didn't leaves the Controller in that state or that
 the BIOS changes it back.

From: Michael Schuh <michael.schuh@gmail.com>
To: bug-followup@freebsd.org
Cc:  
Subject: Re: kern/173251: ACHI/ATA_CAM doesn't find any SATA Disk on ICH7 -
 Dell SC430
Date: Thu, 1 Nov 2012 20:42:30 +0100

 According to http://www.intel.com/content/www/us/en/io/i-o-controller-hub-7=
 -datasheet.html
 
 if i understand the documentation and ata-intel.c right,
 this is a bug programmed into ata-intel.c.
 
 cause of:
 
 This document is intended for Original Equipment Manufacturers and BIOS ven=
 dors
 creating Intel=AE I/O Controller Hub 7 (ICH7) Family based products.
 This document is
 the datasheet for the following:
   =95 Intel=AE 82801GB ICH7 (ICH7)
   =95 Intel=AE 82801GR ICH7 RAID (ICH7R)
   =95 Intel=AE 82801GDH ICH7 Digital Home (ICH7DH)
   =95 Intel=AE 82801GBM ICH7 Mobile (ICH7-M)
   =95 Intel=AE 82801GHM ICH7 Mobile Digital Home (ICH7-M DH)
   =95 Intel=AE 82801GU ICH7-U Ultra Mobile (ICH7-U)
 
 
 Note: Throughout this datasheet, the terms =93Desktop=94, =93Digital Home=
 =94
 =93Mobile=94, and =93Ultra
       Mobile=94 refer to the following components, unless specifically
 noted otherwise:
        =95 Desktop refers to the 82801GB ICH7, 82801GR ICH7R, and 82801GDH =
 ICH7DH.
        =95 Digital Home refers to the 82801GDH ICH7DH and 82801GHM ICH7-M D=
 H.
        =95 Mobile refers to the 82801GBM ICH7-M, and 82801GHM ICH7-M DH.
        =95 Ultra Mobile refers to the 82801GU ICH7-U.
 
 AHCI (Intel=AE ICH7R, ICH7DH, and Mobile Only)
 The ICH7 provides hardware support for Advanced Host Controller
 Interface (AHCI), a
 new programming interface for SATA host controllers. Platforms
 supporting AHCI may
 take advantage of performance features such as no master/slave
 designation for SATA
 devices=97each device is treated as a master=97and hardware-assisted native=
  command
 queuing. AHCI also provides usability enhancements such as Hot-Plug (Deskto=
 p and
 Mobile Only). AHCI requires appropriate software support (e.g., an
 AHCI driver) and for
 some features, hardware support in the SATA device or additional
 platform hardware.
 
 <<< 82801GB no AHCI capability there?????
 Not all ICH7 Chipsets are capable of doing AHCI.
 I am not sure if the chip reported ID's are right translated in
 ata-intel.c oder pci devices.
Responsible-Changed-From-To: freebsd-bugs->mav 
Responsible-Changed-By: mav 
Responsible-Changed-When: Tue Nov 6 16:09:33 UTC 2012 
Responsible-Changed-Why:  
That's my area. 

http://www.freebsd.org/cgi/query-pr.cgi?pr=173251 

From: Alexander Motin <mav@FreeBSD.org>
To: bug-followup@FreeBSD.org, michael.schuh@gmail.com
Cc:  
Subject: Re: kern/173251: [ata] ACHI/ATA_CAM doesn&#39;t find any SATA Disk
 on ICH7 - Dell SC430
Date: Tue, 06 Nov 2012 18:06:26 +0200

 Hi.
 
 Enabling AHCI mode is quite messy process from the OS point of view, as 
 it requires to change device memory allocation, that is not supposed to 
 happen on that stage. I've decided to not do it. What we should do 
 instead is find why legacy mode on your board is not working correctly. 
 I guess problem is that your BIOS incorrectly setups device resource 
 responsible for SATA registers access. Please provide parts of `pciconf 
 -lvcb` output related to the controller and also full _verbose_ (press 
 respective button in boot menu) dmesg output.
 
 -- 
 Alexander Motin

From: Michael Schuh <michael.schuh@gmail.com>
To: bug-followup@freebsd.org
Cc:  
Subject: Re: kern/173251: [ata] ACHI/ATA_CAM doesn&#39;t find any SATA Disk on
 ICH7 - Dell SC430
Date: Thu, 8 Nov 2012 14:42:01 +0100

 2012/11/6 Alexander Motin <mav@freebsd.org>:
 > Hi.
 >
 > Enabling AHCI mode is quite messy process from the OS point of view, as it
 > requires to change device memory allocation, that is not supposed to happen
 > on that stage. I've decided to not do it. What we should do instead is find
 > why legacy mode on your board is not working correctly. I guess problem is
 > that your BIOS incorrectly setups device resource responsible for SATA
 > registers access. Please provide parts of `pciconf -lvcb` output related to
 > the controller and also full _verbose_ (press respective button in boot
 > menu) dmesg output.
 >
 > --
 > Alexander Motin
 
 Yes, i can understand the reasons why not to change the controller modes.
 Better a stable behaviour than a flaky mem alloc mess. That why i love
 and always prefer FreeBSD over any other OS.
 
 The funny part for me is: the kernel can see the SATA Channels, just
 not the disks/drives connected. So it looked for me the ata stuff has
 stopped device scanning after it found the channels.
 
 Many thanks for dealing with this old kind of s... stuff. :-)
 
 The requested pciconf -lvcb, i leaved it at once. I wasn't really sure
 which parts are not needed. i made the earlier tests with and without
 all of the plugged PCI-Cards.
 ========
 [root@blaster]~# pciconf -lvcb
 hostb0@pci0:0:0:0:      class=0x060000 card=0x01ae1028 chip=0x27788086
 rev=0x00 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'E7230/3000/3010 Memory Controller Hub'
     class      = bridge
     subclass   = HOST-PCI
     cap 09[e0] = vendor (length 9) Intel cap 4 version 1
 pcib1@pci0:0:1:0:       class=0x060400 card=0x00008086 chip=0x27798086
 rev=0x00 hdr=0x01
     vendor     = 'Intel Corporation'
     device     = 'E7230/3000/3010 PCI Express Root Port'
     class      = bridge
     subclass   = PCI-PCI
     cap 0d[88] = PCI Bridge card=0x00008086
     cap 01[80] = powerspec 2  supports D0 D3  current D0
     cap 05[90] = MSI supports 1 message
     cap 10[a0] = PCI-Express 1 root port slot max data 128(128) link x4(x8)
 ecap 0002[100] = VC 1 max VC1
 ecap 0005[140] = unknown 1
 pcib2@pci0:0:28:0:      class=0x060400 card=0x00000000 chip=0x27d08086
 rev=0x01 hdr=0x01
     vendor     = 'Intel Corporation'
     device     = 'N10/ICH 7 Family PCI Express Port 1'
     class      = bridge
     subclass   = PCI-PCI
     cap 10[40] = PCI-Express 1 root port slot max data 128(128) link x0(x4)
     cap 05[80] = MSI supports 1 message
     cap 0d[90] = PCI Bridge card=0x00000000
     cap 01[a0] = powerspec 2  supports D0 D3  current D0
 ecap 0002[100] = VC 1 max VC1
 ecap 0005[180] = unknown 1
 pcib3@pci0:0:28:4:      class=0x060400 card=0x00000000 chip=0x27e08086
 rev=0x01 hdr=0x01
     vendor     = 'Intel Corporation'
     device     = '82801GR/GH/GHM (ICH7 Family) PCI Express Port 5'
     class      = bridge
     subclass   = PCI-PCI
     cap 10[40] = PCI-Express 1 root port slot max data 128(128) link x1(x1)
     cap 05[80] = MSI supports 1 message
     cap 0d[90] = PCI Bridge card=0x00000000
     cap 01[a0] = powerspec 2  supports D0 D3  current D0
 ecap 0002[100] = VC 1 max VC1
 ecap 0005[180] = unknown 1
 pcib4@pci0:0:28:5:      class=0x060400 card=0x00000000 chip=0x27e28086
 rev=0x01 hdr=0x01
     vendor     = 'Intel Corporation'
     device     = '82801GR/GH/GHM (ICH7 Family) PCI Express Port 6'
     class      = bridge
     subclass   = PCI-PCI
     cap 10[40] = PCI-Express 1 root port slot max data 128(128) link x1(x1)
     cap 05[80] = MSI supports 1 message
     cap 0d[90] = PCI Bridge card=0x00000000
     cap 01[a0] = powerspec 2  supports D0 D3  current D0
 ecap 0002[100] = VC 1 max VC1
 ecap 0005[180] = unknown 1
 uhci0@pci0:0:29:0:      class=0x0c0300 card=0x01ae1028 chip=0x27c88086
 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'N10/ICH 7 Family USB UHCI Controller'
     class      = serial bus
     subclass   = USB
     bar   [20] = type I/O Port, range 32, base 0xff80, size 32, enabled
 uhci1@pci0:0:29:1:      class=0x0c0300 card=0x01ae1028 chip=0x27c98086
 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'N10/ICH 7 Family USB UHCI Controller'
     class      = serial bus
     subclass   = USB
     bar   [20] = type I/O Port, range 32, base 0xff60, size 32, enabled
 uhci2@pci0:0:29:2:      class=0x0c0300 card=0x01ae1028 chip=0x27ca8086
 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'N10/ICH 7 Family USB UHCI Controller'
     class      = serial bus
     subclass   = USB
     bar   [20] = type I/O Port, range 32, base 0xff40, size 32, enabled
 uhci3@pci0:0:29:3:      class=0x0c0300 card=0x01ae1028 chip=0x27cb8086
 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'N10/ICH 7 Family USB UHCI Controller'
     class      = serial bus
     subclass   = USB
     bar   [20] = type I/O Port, range 32, base 0xff20, size 32, enabled
 ehci0@pci0:0:29:7:      class=0x0c0320 card=0x01ae1028 chip=0x27cc8086
 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'N10/ICH 7 Family USB2 EHCI Controller'
     class      = serial bus
     subclass   = USB
     bar   [10] = type Memory, range 32, base 0xffa80800, size 1024, enabled
     cap 01[50] = powerspec 2  supports D0 D3  current D0
     cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
 pcib5@pci0:0:30:0:      class=0x060401 card=0x00000000 chip=0x244e8086
 rev=0xe1 hdr=0x01
     vendor     = 'Intel Corporation'
     device     = '82801 PCI Bridge'
     class      = bridge
     subclass   = PCI-PCI
     cap 0d[50] = PCI Bridge card=0x00000000
 isab0@pci0:0:31:0:      class=0x060100 card=0x00000000 chip=0x27b88086
 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82801GB/GR (ICH7 Family) LPC Interface Bridge'
     class      = bridge
     subclass   = PCI-ISA
     cap 09[e0] = vendor (length 12) Intel cap 1 version 0
                  features: Quick Resume, 4 PCI-e x1 slots
 atapci0@pci0:0:31:1:    class=0x01018a card=0x01ae1028 chip=0x27df8086
 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82801G (ICH7 Family) IDE Controller'
     class      = mass storage
     subclass   = ATA
     bar   [20] = type I/O Port, range 32, base 0xffa0, size 16, enabled
 atapci1@pci0:0:31:2:    class=0x01018f card=0x01ae1028 chip=0x27c08086
 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'N10/ICH7 Family SATA IDE Controller'
     class      = mass storage
     subclass   = ATA
     bar   [10] = type I/O Port, range 32, base 0xfe00, size  8, enabled
     bar   [14] = type I/O Port, range 32, base 0xfe10, size  4, enabled
     bar   [18] = type I/O Port, range 32, base 0xfe20, size  8, enabled
     bar   [1c] = type I/O Port, range 32, base 0xfe30, size  4, enabled
     bar   [20] = type I/O Port, range 32, base 0xfea0, size 16, enabled
     bar   [24] = type Memory, range 32, base 0xeff00000, size 1024, enabled
     cap 01[70] = powerspec 2  supports D0 D3  current D0
 none0@pci0:0:31:3:      class=0x0c0500 card=0x01ae1028 chip=0x27da8086
 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'N10/ICH 7 Family SMBus Controller'
     class      = serial bus
     subclass   = SMBus
     bar   [20] = type I/O Port, range 32, base 0xece0, size 32, enabled
 em0@pci0:1:0:0: class=0x020000 card=0x135e8086 chip=0x105e8086 rev=0x06 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82571EB Gigabit Ethernet Controller'
     class      = network
     subclass   = ethernet
     bar   [10] = type Memory, range 32, base 0xfea80000, size 131072, enabled
     bar   [14] = type Memory, range 32, base 0xfeaa0000, size 131072, enabled
     bar   [18] = type I/O Port, range 32, base 0xdcc0, size 32, enabled
     cap 01[c8] = powerspec 2  supports D0 D3  current D0
     cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
     cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x4(x4)
 ecap 0001[100] = AER 1 0 fatal 1 non-fatal 2 corrected
 ecap 0003[140] = Serial 1 001517ffffbb22f4
 em1@pci0:1:0:1: class=0x020000 card=0x135e8086 chip=0x105e8086 rev=0x06 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82571EB Gigabit Ethernet Controller'
     class      = network
     subclass   = ethernet
     bar   [10] = type Memory, range 32, base 0xfeac0000, size 131072, enabled
     bar   [14] = type Memory, range 32, base 0xfeae0000, size 131072, enabled
     bar   [18] = type I/O Port, range 32, base 0xdce0, size 32, enabled
     cap 01[c8] = powerspec 2  supports D0 D3  current D0
     cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
     cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x4(x4)
 ecap 0001[100] = AER 1 0 fatal 1 non-fatal 2 corrected
 ecap 0003[140] = Serial 1 001517ffffbb22f4
 re0@pci0:3:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x01 hdr=0x00
     vendor     = 'Realtek Semiconductor Co., Ltd.'
     device     = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
     class      = network
     subclass   = ethernet
     bar   [10] = type I/O Port, range 32, base 0xcc00, size 256, enabled
     bar   [18] = type Memory, range 64, base 0xfe7ff000, size 4096, enabled
     cap 01[40] = powerspec 2  supports D0 D1 D2 D3  current D0
     cap 03[48] = VPD
     cap 05[50] = MSI supports 2 messages, 64 bit enabled with 1 message
     cap 10[60] = PCI-Express 1 endpoint max data 128(1024) link x1(x1)
     cap 09[84] = vendor (length 76)
 ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
 ecap 0002[12c] = VC 1 max VC0
 ecap 0003[148] = Serial 1 7f080000684ce000
 ecap 0004[154] = unknown 1
 bge0@pci0:4:0:0:        class=0x020000 card=0x01ae1028 chip=0x167714e4
 rev=0x01 hdr=0x00
     vendor     = 'Broadcom Corporation'
     device     = 'NetXtreme BCM5751 Gigabit Ethernet PCI Express'
     class      = network
     subclass   = ethernet
     bar   [10] = type Memory, range 64, base 0xfe6f0000, size 65536, enabled
     cap 01[48] = powerspec 2  supports D0 D3  current D0
     cap 03[50] = VPD
     cap 05[58] = MSI supports 8 messages, 64 bit
     cap 10[d0] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
 ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
 ecap 0002[13c] = VC 1 max VC0
 emu10kx0@pci0:5:2:0:    class=0x040100 card=0x00211102 chip=0x00021102
 rev=0x04 hdr=0x00
     vendor     = 'Creative Labs'
     device     = 'SB Live! EMU10k1'
     class      = multimedia
     subclass   = audio
     bar   [10] = type I/O Port, range 32, base 0xbc60, size 32, enabled
     cap 01[dc] = powerspec 1  supports D0 D3  current D0
 none1@pci0:5:2:1:       class=0x098000 card=0x00201102 chip=0x70021102
 rev=0x01 hdr=0x00
     vendor     = 'Creative Labs'
     device     = 'SB Live! Game Port'
     class      = input device
     bar   [10] = type I/O Port, range 32, base 0xbc58, size  8, enabled
     cap 01[dc] = powerspec 1  supports D0 D3  current D0
 
 vgapci0@pci0:5:7:0:     class=0x030000 card=0x01ae1028 chip=0x002018ca
 rev=0x00 hdr=0x00
     vendor     = 'XGI Technology Inc. (eXtreme Graphics Innovation)'
     device     = 'Z7/Z9 (XG20 core)'
     class      = display
     subclass   = VGA
     bar   [10] = type Prefetchable Memory, range 32, base 0xfc000000,
 size 33554432, enabled
     bar   [14] = type Memory, range 32, base 0xfe4c0000, size 262144, enabled
     bar   [18] = type I/O Port, range 32, base 0xbc80, size 128, enabled
     cap 01[40] = powerspec 2  supports D0 D1 D2 D3  current D0
 ========
 
 dmesg of boot -v kernel.old (Generic build without any changes, no
 special loader variables set for ahci/sata
 ========
 [root@blaster]~# dmesg
 Table 'FACP' at 0xfd333
 Table 'SSDT' at 0xfffd14c1
 Table 'APIC' at 0xfd427
 APIC: Found table at 0xfd427
 APIC: Using the MADT enumerator.
 MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
 SMP: Added CPU 0 (AP)
 MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
 SMP: Added CPU 1 (AP)
 MADT: Found CPU APIC ID 5 ACPI ID 3: disabled
 MADT: Found CPU APIC ID 7 ACPI ID 4: disabled
 Copyright (c) 1992-2012 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 9.1-PRERELEASE #3: Wed Oct 31 22:38:12 CET 2012
     root@blaster.michael-schuh.net:/usr/obj/usr/src/sys/GENERIC amd64
 Preloaded elf kernel "/boot/kernel.old/kernel" at 0xffffffff815f9000.
 Preloaded elf obj module "/boot/kernel.old/splash_bmp.ko" at 0xffffffff815f9208.
 Preloaded splash_image_data "/boot/beastie_nebula.bmp" at 0xffffffff815f9778.
 Preloaded elf obj module "/boot/kernel.old/geom_label.ko" at 0xffffffff815f97e0.
 Preloaded elf obj module "/boot/kernel.old/linux.ko" at 0xffffffff815f9dd0.
 Preloaded elf obj module "/boot/kernel.old/acpi_video.ko" at 0xffffffff815fa580.
 Preloaded elf obj module "/boot/modules/cuse4bsd.ko" at 0xffffffff815fab30.
 Preloaded elf obj module "/boot/modules/vboxdrv.ko" at 0xffffffff815fb1a0.
 can't re-use a leaf (geom_label)!
 module_register: module g_label already exists!
 Module g_label failed to register: 17
 Calibrating TSC clock ... TSC clock: 2992567950 Hz
 CPU: Intel(R) Pentium(R) D CPU 3.00GHz (2992.57-MHz K8-class CPU)
   Origin = "GenuineIntel"  Id = 0xf62  Family = 0xf  Model = 0x6  Stepping = 2
   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0xe43d<SSE3,DTES64,MON,DS_CPL,VMX,CNXT-ID,CX16,xTPR,PDCM>
   AMD Features=0x20100800<SYSCALL,NX,LM>
   AMD Features2=0x1<LAHF>
   TSC: P-state invariant
 real memory  = 4294967296 (4096 MB)
 Physical memory chunk(s):
 0x0000000000010000 - 0x000000000009bfff, 573440 bytes (140 pages)
 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
 0x000000000162a000 - 0x00000000e8d8afff, 3883274240 bytes (948065 pages)
 avail memory = 3856080896 (3677 MB)
 INTR: Adding local APIC 0 as a target
 Event timer "LAPIC" quality 400
 ACPI APIC Table: <DELL   PESC430>
 INTR: Adding local APIC 0 as a target
 INTR: Adding local APIC 1 as a target
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 FreeBSD/SMP: 1 package(s) x 2 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
 APIC: CPU 0 has ACPI ID 1
 APIC: CPU 1 has ACPI ID 2
 x86bios:  IVT 0x000000-0x0004ff at 0xfffffe0000000000
 x86bios: SSEG 0x098000-0x098fff at 0xffffff8000212000
 x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000
 x86bios:  ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
 ULE: setup cpu 0
 ULE: setup cpu 1
 ACPI: RSDP 0xfeb00 00024 (v02 DELL  )
 ACPI: XSDT 0xfd23b 0005C (v01 DELL    PESC430 00000007 ASL  00000061)
 ACPI: FACP 0xfd333 000F4 (v03 DELL    PESC430 00000007 ASL  00000061)
 ACPI: DSDT 0xfffce4df 02E15 (v01   DELL    dt_ex 00001000 INTL 20050309)
 ACPI: FACS 0xefe8cc00 00040
 ACPI: SSDT 0xfffd14c1 00088 (v01   DELL    st_ex 00001000 INTL 20050309)
 ACPI: APIC 0xfd427 00072 (v01 DELL    PESC430 00000007 ASL  00000061)
 ACPI: BOOT 0xfd499 00028 (v01 DELL    PESC430 00000007 ASL  00000061)
 ACPI: ASF! 0xfd4c1 00067 (v16 DELL    PESC430 00000007 ASL  00000061)
 ACPI: MCFG 0xfd528 0003E (v01 DELL    PESC430 00000007 ASL  00000061)
 ACPI: HPET 0xfd566 00038 (v01 DELL    PESC430 00000007 ASL  00000061)
 MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
 ioapic0: Changing APIC ID to 8
 ioapic0: Routing external 8259A's -> intpin 0
 MADT: Interrupt override: source 0, irq 2
 ioapic0: Routing IRQ 0 -> intpin 2
 MADT: Interrupt override: source 9, irq 9
 ioapic0: intpin 9 trigger: level
 lapic: Routing NMI -> LINT1
 lapic: LINT1 trigger: level
 lapic: LINT1 polarity: high
 ioapic0 <Version 2.0> irqs 0-23 on motherboard
 lapic0: Forcing LINT1 to edge trigger
 cpu0 BSP:
      ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
 Cuse4BSD v0.1.26 @ /dev/cuse
 wlan: <802.11 Link Layer>
 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
 feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5
 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
 kbd: new array size 4
 kbd1 at kbdmux0
 mem: <memory>
 nfslock: pseudo-device
 null: <null device, zero device>
 random: <entropy source, Software, Yarrow>
 VESA: INT 0x10 vector 0xc000:0x0bc7
 VESA: information block
 0000   56 45 53 41 00 03 00 01 00 99 00 00 00 00 22 00
 0010   00 99 00 01 00 01 14 01 00 99 46 01 00 99 5a 01
 0020   00 99 02 01 01 01 00 01 03 01 04 01 05 01 07 01
 0030   30 01 31 01 0d 01 0e 01 10 01 11 01 13 01 14 01
 0040   16 01 17 01 19 01 1a 01 32 01 33 01 34 01 35 01
 0050   36 01 37 01 38 01 39 01 3a 01 3b 01 3c 01 3d 01
 0060   3e 01 ff ff 01 01 01 01 01 01 01 01 01 01 01 01
 0070   01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
 0080   01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
 0090   01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
 00a0   01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
 00b0   01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
 00c0   01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
 00d0   01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
 00e0   01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
 00f0   01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
 0100   58 47 49 00 00 00 00 00 00 00 00 00 00 00 00 00
 0110   00 00 00 00 58 47 49 20 54 65 63 68 6e 6f 6c 6f
 0120   67 79 2c 20 49 6e 63 2e 00 00 00 00 00 00 00 00
 0130   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 0140   00 00 00 00 00 00 56 6f 6c 61 72 69 20 5a 37 00
 0150   00 00 00 00 00 00 00 00 00 00 31 2e 30 32 2e 30
 0160   34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 0170   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 0180   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 0190   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 01a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 01b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 01c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 01d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 01e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 01f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 VESA: 32 mode(s) found
 VESA: v3.0, 16384k memory, flags:0x0, mode table:0xffffff8000258022 (99000022)
 VESA: XGI
 VESA: XGI Technology, Inc. Volari Z7 1.02.04
 io: <I/O>
 splash: image@0xffffffff81533008, size:64534
 bmp_start(): splash_mode:257
 splash: image decoder found: splash_bmp
 hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
 ctl: CAM Target Layer loaded
 acpi0: <DELL PESC430> on motherboard
 PCIe: Memory Mapped configuration base @ 0xf0000000
 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
 acpi0: Power Button (fixed)
 acpi0: reservation of 0, a0000 (3) failed
 acpi0: reservation of 100000, f00000 (3) failed
 acpi0: reservation of 1000000, eee8cc00 (3) failed
 cpu0: Processor \\_PR_.CPU0 (ACPI ID 1) -> APIC ID 0
 cpu0: <ACPI CPU> on acpi0
 cpu0: switching to generic Cx mode
 cpu1: Processor \\_PR_.CPU1 (ACPI ID 2) -> APIC ID 1
 cpu1: <ACPI CPU> on acpi0
 ACPI: Processor \\_PR_.CPU2 (ACPI ID 3) ignored
 ACPI: Processor \\_PR_.CPU3 (ACPI ID 4) ignored
 atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
 atrtc0: registered as a time-of-day clock (resolution 1000000us,
 adjustment 0.500000000s)
 ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
 Event timer "RTC" frequency 32768 Hz quality 0
 attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
 Timecounter "i8254" frequency 1193182 Hz quality 0
 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 50
 Event timer "i8254" frequency 1193182 Hz quality 100
 ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
 hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route
 hpet0:  t0: irqs 0x00f00000 (0), 64bit, periodic
 hpet0:  t1: irqs 0x00f00000 (0)
 hpet0:  t2: irqs 0x00f00800 (0)
 Timecounter "HPET" frequency 14318180 Hz quality 950
 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 51
 Event timer "HPET" frequency 14318180 Hz quality 450
 Event timer "HPET1" frequency 14318180 Hz quality 440
 Event timer "HPET2" frequency 14318180 Hz quality 440
 pci_link0:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11 12 15
   Validation          0   11   N     0  3 4 5 6 7 9 10 11 12 15
   After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
 pci_link1:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   10   N     0  3 4 5 6 7 9 10 11 12 15
   Validation          0   10   N     0  3 4 5 6 7 9 10 11 12 15
   After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
 pci_link2:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0    3   N     0  3 4 5 6 7 9 10 11 12 15
   Validation          0    3   N     0  3 4 5 6 7 9 10 11 12 15
   After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
 pci_link3:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  3 4 5 6 7 9 10 11 12 15
   Validation          0  255   N     0  3 4 5 6 7 9 10 11 12 15
   After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
 pci_link4:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0    5   N     0  3 4 5 6 7 9 10 11 12 15
   Validation          0    5   N     0  3 4 5 6 7 9 10 11 12 15
   After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
 pci_link5:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0    9   N     0  3 4 5 6 7 9 10 11 12 15
   Validation          0    9   N     0  3 4 5 6 7 9 10 11 12 15
   After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
 pci_link6:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0    5   N     0  3 4 5 6 7 9 10 11 12 15
   Validation          0    5   N     0  3 4 5 6 7 9 10 11 12 15
   After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
 pci_link7:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   10   N     0  3 4 5 6 7 9 10 11 12 15
   Validation          0   10   N     0  3 4 5 6 7 9 10 11 12 15
   After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 15
 acpi_button0: <Power Button> on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pcib0: decoding 4 range 0-0xcf7
 pcib0: decoding 4 range 0xd00-0xffff
 pcib0: decoding 3 range 0xa0000-0xbffff
 pcib0: decoding 3 range 0xc0000-0xeffff
 pcib0: decoding 3 range 0xf0000-0xfffff
 pcib0: decoding 3 range 0xeff00000-0xefffffff
 pcib0: decoding 3 range 0xf4000000-0xfebfffff
 pcib0: decoding 3 range 0xffa80800-0xffa80bff
 pci0: <ACPI PCI bus> on pcib0
 pci0: domain=0, physical bus=0
 found-> vendor=0x8086, dev=0x2778, revid=0x00
         domain=0, bus=0, slot=0, func=0
         class=06-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found-> vendor=0x8086, dev=0x2779, revid=0x00
         domain=0, bus=0, slot=1, func=0
         class=06-04-00, hdrtype=0x01, mfdev=0
         cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
         intpin=a, irq=11
         powerspec 2  supports D0 D3  current D0
         MSI supports 1 message
 pcib0: matched entry for 0.1.INTA
 pcib0: slot 1 INTA hardwired to IRQ 16
 found-> vendor=0x8086, dev=0x27d0, revid=0x01
         domain=0, bus=0, slot=28, func=0
         class=06-04-00, hdrtype=0x01, mfdev=1
         cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
         intpin=a, irq=11
         powerspec 2  supports D0 D3  current D0
         MSI supports 1 message
 pcib0: matched entry for 0.28.INTA
 pcib0: slot 28 INTA hardwired to IRQ 16
 found-> vendor=0x8086, dev=0x27e0, revid=0x01
         domain=0, bus=0, slot=28, func=4
         class=06-04-00, hdrtype=0x01, mfdev=1
         cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
         intpin=a, irq=11
         powerspec 2  supports D0 D3  current D0
         MSI supports 1 message
 pcib0: matched entry for 0.28.INTA
 pcib0: slot 28 INTA hardwired to IRQ 16
 found-> vendor=0x8086, dev=0x27e2, revid=0x01
         domain=0, bus=0, slot=28, func=5
         class=06-04-00, hdrtype=0x01, mfdev=1
         cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
         intpin=b, irq=10
         powerspec 2  supports D0 D3  current D0
         MSI supports 1 message
 pcib0: matched entry for 0.28.INTB
 pcib0: slot 28 INTB hardwired to IRQ 17
 found-> vendor=0x8086, dev=0x27c8, revid=0x01
         domain=0, bus=0, slot=29, func=0
         class=0c-03-00, hdrtype=0x00, mfdev=1
         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=a, irq=9
         map[20]: type I/O Port, range 32, base 0xff80, size  5, enabled
 
 pcib0: allocated type 4 (0xff80-0xff9f) for rid 20 of pci0:0:29:0
 pcib0: matched entry for 0.29.INTA
 pcib0: slot 29 INTA hardwired to IRQ 21
 found-> vendor=0x8086, dev=0x27c9, revid=0x01
         domain=0, bus=0, slot=29, func=1
         class=0c-03-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=b, irq=5
         map[20]: type I/O Port, range 32, base 0xff60, size  5, enabled
 pcib0: allocated type 4 (0xff60-0xff7f) for rid 20 of pci0:0:29:1
 pcib0: matched entry for 0.29.INTB
 pcib0: slot 29 INTB hardwired to IRQ 22
 found-> vendor=0x8086, dev=0x27ca, revid=0x01
         domain=0, bus=0, slot=29, func=2
         class=0c-03-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=c, irq=3
         map[20]: type I/O Port, range 32, base 0xff40, size  5, enabled
 pcib0: allocated type 4 (0xff40-0xff5f) for rid 20 of pci0:0:29:2
 pcib0: matched entry for 0.29.INTC
 pcib0: slot 29 INTC hardwired to IRQ 18
 found-> vendor=0x8086, dev=0x27cb, revid=0x01
         domain=0, bus=0, slot=29, func=3
         class=0c-03-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=d, irq=10
         map[20]: type I/O Port, range 32, base 0xff20, size  5, enabled
 pcib0: allocated type 4 (0xff20-0xff3f) for rid 20 of pci0:0:29:3
 pcib0: matched entry for 0.29.INTD
 pcib0: slot 29 INTD hardwired to IRQ 23
 found-> vendor=0x8086, dev=0x27cc, revid=0x01
         domain=0, bus=0, slot=29, func=7
         class=0c-03-20, hdrtype=0x00, mfdev=0
         cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=a, irq=9
         powerspec 2  supports D0 D3  current D0
         map[10]: type Memory, range 32, base 0xffa80800, size 10, enabled
 pcib0: allocated type 3 (0xffa80800-0xffa80bff) for rid 10 of pci0:0:29:7
 pcib0: matched entry for 0.29.INTA
 pcib0: slot 29 INTA hardwired to IRQ 21
 found-> vendor=0x8086, dev=0x244e, revid=0xe1
         domain=0, bus=0, slot=30, func=0
         class=06-04-01, hdrtype=0x01, mfdev=0
         cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
 found-> vendor=0x8086, dev=0x27b8, revid=0x01
         domain=0, bus=0, slot=31, func=0
         class=06-01-00, hdrtype=0x00, mfdev=1
         cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found-> vendor=0x8086, dev=0x27df, revid=0x01
         domain=0, bus=0, slot=31, func=1
         class=01-01-8a, hdrtype=0x00, mfdev=0
         cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=a, irq=11
 pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1
 pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1
 pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1
 pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1
         map[20]: type I/O Port, range 32, base 0xffa0, size  4, enabled
 pcib0: allocated type 4 (0xffa0-0xffaf) for rid 20 of pci0:0:31:1
 pcib0: matched entry for 0.31.INTA
 pcib0: slot 31 INTA hardwired to IRQ 16
 found-> vendor=0x8086, dev=0x27c0, revid=0x01
         domain=0, bus=0, slot=31, func=2
         class=01-01-8f, hdrtype=0x00, mfdev=0
         cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=c, irq=5
         powerspec 2  supports D0 D3  current D0
         map[10]: type I/O Port, range 32, base 0xfe00, size  3, enabled
 pcib0: allocated type 4 (0xfe00-0xfe07) for rid 10 of pci0:0:31:2
         map[14]: type I/O Port, range 32, base 0xfe10, size  2, enabled
 pcib0: allocated type 4 (0xfe10-0xfe13) for rid 14 of pci0:0:31:2
         map[18]: type I/O Port, range 32, base 0xfe20, size  3, enabled
 pcib0: allocated type 4 (0xfe20-0xfe27) for rid 18 of pci0:0:31:2
         map[1c]: type I/O Port, range 32, base 0xfe30, size  2, enabled
 pcib0: allocated type 4 (0xfe30-0xfe33) for rid 1c of pci0:0:31:2
         map[20]: type I/O Port, range 32, base 0xfea0, size  4, enabled
 pcib0: allocated type 4 (0xfea0-0xfeaf) for rid 20 of pci0:0:31:2
         map[24]: type Memory, range 32, base 0, size 10, enabled
 pcib0: matched entry for 0.31.INTC
 pcib0: slot 31 INTC hardwired to IRQ 20
 found-> vendor=0x8086, dev=0x27da, revid=0x01
         domain=0, bus=0, slot=31, func=3
         class=0c-05-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=b, irq=10
         map[20]: type I/O Port, range 32, base 0xece0, size  5, enabled
 pcib0: allocated type 4 (0xece0-0xecff) for rid 20 of pci0:0:31:3
 pcib0: matched entry for 0.31.INTB
 pcib0: slot 31 INTB hardwired to IRQ 17
 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
 pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib1
 pcib0: allocated type 3 (0xfea00000-0xfeafffff) for rid 20 of pcib1
 pcib1:   domain            0
 pcib1:   secondary bus     1
 pcib1:   subordinate bus   1
 pcib1:   I/O decode        0xd000-0xdfff
 pcib1:   memory decode     0xfea00000-0xfeafffff
 pcib1:   no prefetched decode
 pci1: <ACPI PCI bus> on pcib1
 pci1: domain=0, physical bus=1
 found-> vendor=0x8086, dev=0x105e, revid=0x06
         domain=0, bus=1, slot=0, func=0
         class=02-00-00, hdrtype=0x00, mfdev=1
         cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=a, irq=11
         powerspec 2  supports D0 D3  current D0
         MSI supports 1 message, 64 bit
         map[10]: type Memory, range 32, base 0xfea80000, size 17, enabled
 pcib1: allocated memory range (0xfea80000-0xfea9ffff) for rid 10 of pci0:1:0:0
         map[14]: type Memory, range 32, base 0xfeaa0000, size 17, enabled
 pcib1: allocated memory range (0xfeaa0000-0xfeabffff) for rid 14 of pci0:1:0:0
         map[18]: type I/O Port, range 32, base 0xdcc0, size  5, enabled
 pcib1: allocated I/O port range (0xdcc0-0xdcdf) for rid 18 of pci0:1:0:0
 pcib1: matched entry for 1.0.INTA
 pcib1: slot 0 INTA hardwired to IRQ 16
 found-> vendor=0x8086, dev=0x105e, revid=0x06
         domain=0, bus=1, slot=0, func=1
         class=02-00-00, hdrtype=0x00, mfdev=1
         cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=b, irq=10
         powerspec 2  supports D0 D3  current D0
         MSI supports 1 message, 64 bit
         map[10]: type Memory, range 32, base 0xfeac0000, size 17, enabled
 pcib1: allocated memory range (0xfeac0000-0xfeadffff) for rid 10 of pci0:1:0:1
         map[14]: type Memory, range 32, base 0xfeae0000, size 17, enabled
 pcib1: allocated memory range (0xfeae0000-0xfeafffff) for rid 14 of pci0:1:0:1
         map[18]: type I/O Port, range 32, base 0xdce0, size  5, enabled
 pcib1: allocated I/O port range (0xdce0-0xdcff) for rid 18 of pci0:1:0:1
 pcib1: matched entry for 1.0.INTB
 pcib1: slot 0 INTB hardwired to IRQ 17
 em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xdcc0-0xdcdf
 mem 0xfea80000-0xfea9ffff,0xfeaa0000-0xfeabffff irq 16 at device 0.0
 on pci1
 em0: attempting to allocate 1 MSI vectors (1 supported)
 msi: routing MSI IRQ 256 to local APIC 0 vector 52
 em0: using IRQ 256 for MSI
 em0: Using an MSI interrupt
 em0: Using 1024 TX descriptors instead of 8192!
 em0: Using 1024 RX descriptors instead of 8192!
 em0: bpf attached
 em0: Ethernet address: 00:15:17:bb:22:f4
 em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xdce0-0xdcff
 mem 0xfeac0000-0xfeadffff,0xfeae0000-0xfeafffff irq 17 at device 0.1
 on pci1
 em1: attempting to allocate 1 MSI vectors (1 supported)
 msi: routing MSI IRQ 257 to local APIC 0 vector 53
 em1: using IRQ 257 for MSI
 em1: Using an MSI interrupt
 em1: Using 1024 TX descriptors instead of 8192!
 em1: Using 1024 RX descriptors instead of 8192!
 em1: bpf attached
 em1: Ethernet address: 00:15:17:bb:22:f5
 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
 pcib0: allocated type 3 (0xfe900000-0xfe9fffff) for rid 20 of pcib2
 pcib2:   domain            0
 pcib2:   secondary bus     2
 pcib2:   subordinate bus   2
 pcib2:   memory decode     0xfe900000-0xfe9fffff
 pcib2:   no prefetched decode
 pci2: <ACPI PCI bus> on pcib2
 pci2: domain=0, physical bus=2
 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
 pcib0: allocated type 4 (0xc000-0xcfff) for rid 1c of pcib3
 pcib0: allocated type 3 (0xfe700000-0xfe8fffff) for rid 20 of pcib3
 pcib3:   domain            0
 pcib3:   secondary bus     3
 pcib3:   subordinate bus   3
 pcib3:   I/O decode        0xc000-0xcfff
 pcib3:   memory decode     0xfe700000-0xfe8fffff
 pcib3:   no prefetched decode
 pci3: <ACPI PCI bus> on pcib3
 pci3: domain=0, physical bus=3
 found-> vendor=0x10ec, dev=0x8168, revid=0x01
         domain=0, bus=3, slot=0, func=0
         class=02-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=a, irq=11
         powerspec 2  supports D0 D1 D2 D3  current D0
         MSI supports 2 messages, 64 bit
         map[10]: type I/O Port, range 32, base 0xcc00, size  8, enabled
 pcib3: allocated I/O port range (0xcc00-0xccff) for rid 10 of pci0:3:0:0
         map[18]: type Memory, range 64, base 0xfe7ff000, size 12, enabled
 pcib3: allocated memory range (0xfe7ff000-0xfe7fffff) for rid 18 of pci0:3:0:0
 pcib3: matched entry for 3.0.INTA
 pcib3: slot 0 INTA hardwired to IRQ 16
 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
 0xcc00-0xccff mem 0xfe7ff000-0xfe7fffff irq 16 at device 0.0 on pci3
 re0: MSI count : 2
 re0: MSI-X count : 0
 re0: attempting to allocate 1 MSI vectors (2 supported)
 msi: routing MSI IRQ 258 to local APIC 0 vector 54
 re0: using IRQ 258 for MSI
 re0: Using 1 MSI message
 re0: Chip rev. 0x38000000
 re0: MAC rev. 0x00000000
 miibus0: <MII bus> on re0
 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
 rgephy0: OUI 0x00e04c, model 0x0011, rev. 2
 rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
 1000baseT-FDX-flow-master, auto, auto-flow
 re0: bpf attached
 re0: Ethernet address: 74:ea:3a:80:26:74
 pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
 pcib0: allocated type 3 (0xfe600000-0xfe6fffff) for rid 20 of pcib4
 pcib4:   domain            0
 pcib4:   secondary bus     4
 pcib4:   subordinate bus   4
 pcib4:   memory decode     0xfe600000-0xfe6fffff
 pcib4:   no prefetched decode
 pci4: <ACPI PCI bus> on pcib4
 pci4: domain=0, physical bus=4
 found-> vendor=0x14e4, dev=0x1677, revid=0x01
         domain=0, bus=4, slot=0, func=0
         class=02-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=a, irq=10
         powerspec 2  supports D0 D3  current D0
         MSI supports 8 messages, 64 bit
         map[10]: type Memory, range 64, base 0xfe6f0000, size 16, enabled
 pcib4: allocated memory range (0xfe6f0000-0xfe6fffff) for rid 10 of pci0:4:0:0
 pcib4: matched entry for 4.0.INTA
 pcib4: slot 0 INTA hardwired to IRQ 17
 pci0:4:0:0: bad VPD cksum, remain 14
 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
 0x004001> mem 0xfe6f0000-0xfe6fffff irq 17 at device 0.0 on pci4
 bge0: CHIP ID 0x00004001; ASIC REV 0x04; CHIP REV 0x40; PCI-E
 miibus1: <MII bus> on bge0
 brgphy0: <BCM5750 1000BASE-T media interface> PHY 1 on miibus1
 brgphy0: OUI 0x001018, model 0x0018, rev. 0
 brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
 bge0: bpf attached
 bge0: Ethernet address: 00:13:72:18:a6:11
 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 55
 uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xff80-0xff9f
 irq 21 at device 29.0 on pci0
 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 56
 usbus0 on uhci0
 usbus0: bpf attached
 uhci0: usbpf: Attached
 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xff60-0xff7f
 irq 22 at device 29.1 on pci0
 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 57
 usbus1 on uhci1
 usbus1: bpf attached
 uhci1: usbpf: Attached
 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xff40-0xff5f
 irq 18 at device 29.2 on pci0
 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 58
 usbus2 on uhci2
 usbus2: bpf attached
 uhci2: usbpf: Attached
 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xff20-0xff3f
 irq 23 at device 29.3 on pci0
 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 59
 usbus3 on uhci3
 usbus3: bpf attached
 uhci3: usbpf: Attached
 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
 0xffa80800-0xffa80bff irq 21 at device 29.7 on pci0
 usbus4: EHCI version 1.0
 usbus4 on ehci0
 usbus4: bpf attached
 ehci0: usbpf: Attached
 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 pcib0: allocated type 4 (0xb000-0xbfff) for rid 1c of pcib5
 pcib0: allocated type 3 (0xfe400000-0xfe5fffff) for rid 20 of pcib5
 pcib0: allocated type 3 (0xfc000000-0xfdffffff) for rid 24 of pcib5
 pcib5:   domain            0
 pcib5:   secondary bus     5
 pcib5:   subordinate bus   5
 pcib5:   I/O decode        0xb000-0xbfff
 pcib5:   memory decode     0xfe400000-0xfe5fffff
 pcib5:   prefetched decode 0xfc000000-0xfdffffff
 pcib5:   Subtractively decoded bridge.
 pci5: <ACPI PCI bus> on pcib5
 pci5: domain=0, physical bus=5
 found-> vendor=0x1102, dev=0x0002, revid=0x04
         domain=0, bus=5, slot=2, func=0
         class=04-01-00, hdrtype=0x00, mfdev=1
         cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
         intpin=a, irq=3
         powerspec 1  supports D0 D3  current D0
         map[10]: type I/O Port, range 32, base 0xbc60, size  5, enabled
 pcib5: allocated I/O port range (0xbc60-0xbc7f) for rid 10 of pci0:5:2:0
 pcib5: matched entry for 5.2.INTA
 pcib5: slot 2 INTA hardwired to IRQ 18
 found-> vendor=0x1102, dev=0x7002, revid=0x01
         domain=0, bus=5, slot=2, func=1
         class=09-80-00, hdrtype=0x00, mfdev=1
         cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         powerspec 1  supports D0 D3  current D0
         map[10]: type I/O Port, range 32, base 0xbc58, size  3, enabled
 pcib5: allocated I/O port range (0xbc58-0xbc5f) for rid 10 of pci0:5:2:1
 found-> vendor=0x18ca, dev=0x0020, revid=0x00
         domain=0, bus=5, slot=7, func=0
         class=03-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         powerspec 2  supports D0 D1 D2 D3  current D0
         map[10]: type Prefetchable Memory, range 32, base 0xfc000000,
 size 25, enabled
 pcib5: allocated prefetch range (0xfc000000-0xfdffffff) for rid 10 of pci0:5:7:0
         map[14]: type Memory, range 32, base 0xfe4c0000, size 18, enabled
 pcib5: allocated memory range (0xfe4c0000-0xfe4fffff) for rid 14 of pci0:5:7:0
         map[18]: type I/O Port, range 32, base 0xbc80, size  7, enabled
 pcib5: allocated I/O port range (0xbc80-0xbcff) for rid 18 of pci0:5:7:0
 emu10kx0: <Creative SBLive! [CT4620]> port 0xbc60-0xbc7f irq 18 at
 device 2.0 on pci5
 emu10kx: setmap (2e40000, 8000), nseg=1, error=0
 emu10kx: setmap (2e50000, 1000), nseg=1, error=0
 emu10kx0: Card Configuration (   0x00000015 )
 emu10kx0: Card Configuration ( & 0xff000000 ) :
 emu10kx0: Card Configuration ( & 0x00ff0000 ) :
 emu10kx0: Card Configuration ( & 0x0000ff00 ) :
 emu10kx0: Card Configuration ( & 0x000000ff ) : [AUTOMUTE]
 [LOCKTANKCACHE] [AUDIOENABLE]
 pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0
 pcm0: <TriTech TR28023 AC97 Codec (id = 0x54524103)>
 pcm0: Codec features 6 bit master volume, no 3D Stereo Enhancement
 pcm0: ac97 codec dac ready count: 0
 pcm0: Mixer "vol":
 pcm0: Mixer "pcm":
 pcm0: Mixer "speaker":
 pcm0: Mixer "line":
 pcm0: Mixer "mic":
 pcm0: Mixer "cd":
 pcm0: Mixer "rec":
 pcm0: Mixer "igain":
 pcm0: Mixer "line1":
 pcm0: Mixer "line2":
 pcm0: Mixer "line3":
 pcm0: Mixer "dig1":
 pcm0: Mixer "dig2":
 pcm0: Mixer "dig3":
 pcm0: Mixer "phin":
 pcm0: Mixer "phout":
 pcm0: Mixer "video":
 pcm0: clone manager: deadline=750ms flags=0x8000001e
 emu10kx: setmap (2e60000, 1000), nseg=1, error=0
 emu10kx: setmap (2e70000, 1000), nseg=1, error=0
 emu10kx: setmap (2ea0000, 1000), nseg=1, error=0
 emu10kx: setmap (2eb0000, 1000), nseg=1, error=0
 pcm0: sndbuf_setmap 2ec0000, 10000; 0xffffff80e8dc8000 -> 2ec0000
 pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0
 pcm1: Mixer "vol":
 pcm1: Mixer "pcm":
 pcm1: clone manager: deadline=750ms flags=0x8000001e
 emu10kx: setmap (2ed0000, 1000), nseg=1, error=0
 pci5: <input device> at device 2.1 (no driver attached)
 vgapci0: <VGA-compatible display> port 0xbc80-0xbcff mem
 0xfc000000-0xfdffffff,0xfe4c0000-0xfe4fffff at device 7.0 on pci5
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel ICH7 UDMA100 controller> port
 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device
 31.1 on pci0
 ata0: <ATA channel> at channel 0 on atapci0
 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 60
 atapci1: <Intel ICH7 SATA300 controller> port
 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf
 irq 20 at device 31.2 on pci0
 pcib0: allocated type 3 (0xeff00000-0xeff003ff) for rid 24 of atapci1
 atapci1: Lazy allocation of 0x400 bytes rid 0x24 type 3 at 0xeff00000
 ata2: <ATA channel> at channel 0 on atapci1
 ata3: <ATA channel> at channel 1 on atapci1
 pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 61
 uart0: fast interrupt
 acpi0: wakeup code va 0xffffff810884f000 pa 0x90000
 ex_isa_identify()
 ahc_isa_probe 0: ioport 0xc00 alloc failed
 ahc_isa_probe 1: ioport 0x1c00 alloc failed
 ahc_isa_probe 2: ioport 0x2c00 alloc failed
 ahc_isa_probe 3: ioport 0x3c00 alloc failed
 ahc_isa_probe 4: ioport 0x4c00 alloc failed
 ahc_isa_probe 5: ioport 0x5c00 alloc failed
 ahc_isa_probe 6: ioport 0x6c00 alloc failed
 ahc_isa_probe 7: ioport 0x7c00 alloc failed
 ahc_isa_probe 8: ioport 0x8c00 alloc failed
 ahc_isa_probe 9: ioport 0x9c00 alloc failed
 ahc_isa_probe 10: ioport 0xac00 alloc failed
 ahc_isa_probe 11: ioport 0xbc00 alloc failed
 ahc_isa_probe 12: ioport 0xcc00 alloc failed
 ahc_isa_probe 13: ioport 0xdc00 alloc failed
 ahc_isa_probe 14: ioport 0xec00 alloc failed
 pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
 pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
 pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
 pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
 pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
 pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
 pcib0: allocated type 3 (0xc0000-0xc07ff) for rid 0 of orm0
 pcib0: allocated type 3 (0xc0000-0xc7fff) for rid 0 of orm0
 pcib0: allocated type 3 (0xc8000-0xc87ff) for rid 1 of orm0
 pcib0: allocated type 3 (0xc8000-0xc9fff) for rid 1 of orm0
 pcib0: allocated type 3 (0xca000-0xca7ff) for rid 2 of orm0
 pcib0: allocated type 3 (0xca000-0xcbfff) for rid 2 of orm0
 pcib0: allocated type 3 (0xcc000-0xcc7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xcc800-0xccfff) for rid 3 of orm0
 pcib0: allocated type 3 (0xcd000-0xcd7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xcd800-0xcdfff) for rid 3 of orm0
 pcib0: allocated type 3 (0xce000-0xce7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xce800-0xcefff) for rid 3 of orm0
 pcib0: allocated type 3 (0xcf000-0xcf7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xcf800-0xcffff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xda000-0xda7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xda800-0xdafff) for rid 3 of orm0
 pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 3 of orm0
 pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 3 of orm0
 pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xdd800-0xddfff) for rid 3 of orm0
 pcib0: allocated type 3 (0xde000-0xde7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xde800-0xdefff) for rid 3 of orm0
 pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xdf800-0xdffff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe0000-0xe07ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe0800-0xe0fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe1000-0xe17ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe1800-0xe1fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe2000-0xe27ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe2800-0xe2fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe3000-0xe37ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe3800-0xe3fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe4000-0xe47ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe4800-0xe4fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe5000-0xe57ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe5800-0xe5fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe6000-0xe67ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe6800-0xe6fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe7000-0xe77ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe7800-0xe7fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe8000-0xe87ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe8800-0xe8fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe9000-0xe97ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xe9800-0xe9fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xea000-0xea7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xea800-0xeafff) for rid 3 of orm0
 pcib0: allocated type 3 (0xeb000-0xeb7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xeb800-0xebfff) for rid 3 of orm0
 pcib0: allocated type 3 (0xec000-0xec7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xec800-0xecfff) for rid 3 of orm0
 pcib0: allocated type 3 (0xed000-0xed7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xed800-0xedfff) for rid 3 of orm0
 pcib0: allocated type 3 (0xee000-0xee7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xee800-0xeefff) for rid 3 of orm0
 pcib0: allocated type 3 (0xef000-0xef7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xef800-0xeffff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf0000-0xf07ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf0800-0xf0fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf1000-0xf17ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf1800-0xf1fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf2000-0xf27ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf2800-0xf2fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf3000-0xf37ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf3800-0xf3fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf4000-0xf47ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf4800-0xf4fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf5000-0xf57ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf5800-0xf5fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf6000-0xf67ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf6800-0xf6fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf7000-0xf77ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf7800-0xf7fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf8000-0xf87ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf8800-0xf8fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf9000-0xf97ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xf9800-0xf9fff) for rid 3 of orm0
 pcib0: allocated type 3 (0xfa000-0xfa7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xfa800-0xfafff) for rid 3 of orm0
 pcib0: allocated type 3 (0xfb000-0xfb7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xfb800-0xfbfff) for rid 3 of orm0
 pcib0: allocated type 3 (0xfc000-0xfc7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xfc800-0xfcfff) for rid 3 of orm0
 pcib0: allocated type 3 (0xfd000-0xfd7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xfd800-0xfdfff) for rid 3 of orm0
 pcib0: allocated type 3 (0xfe000-0xfe7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xfe800-0xfefff) for rid 3 of orm0
 pcib0: allocated type 3 (0xff000-0xff7ff) for rid 3 of orm0
 pcib0: allocated type 3 (0xff800-0xfffff) for rid 3 of orm0
 isa_probe_children: disabling PnP devices
 atrtc: atrtc0 already exists; skipping it
 attimer: attimer0 already exists; skipping it
 sc: sc0 already exists; skipping it
 uart: uart0 already exists; skipping it
 isa_probe_children: probing non-PnP devices
 orm0: <ISA Option ROMs> at iomem
 0xc0000-0xc7fff,0xc8000-0xc9fff,0xca000-0xcbfff on isa0
 atkbd: the current kbd controller command byte 0045
 atkbd: keyboard ID 0xffffffff (1)
 atkbd: failed to reset the keyboard.
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
 pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
 pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
 pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
 pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
 pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 62
 atkbd0: [GIANT-LOCKED]
 psm0: unable to allocate IRQ
 pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
 pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
 ppc0: cannot reserve I/O port range
 ppc0 failed to probe at irq 7 on isa0
 pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
 uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
 wbwd0 failed to probe on isa0
 isa_probe_children: probing PnP devices
 p4tcc0: <CPU Frequency Thermal Control> on cpu0
 p4tcc1: <CPU Frequency Thermal Control> on cpu1
 Device configuration finished.
 procfs registered
 Timecounters tick every 1.000 msec
 vlan: initialized, using hash tables with chaining
 vboxdrv: fAsync=0 offMin=0x2ee offMax=0x771
 Linux ELF exec handler installed
 lo0: bpf attached
 hptrr: no controller detected.
 usbus0: 12Mbps Full Speed USB v1.0
 usbus1: 12Mbps Full Speed USB v1.0
 usbus2: 12Mbps Full Speed USB v1.0
 usbus3: 12Mbps Full Speed USB v1.0
 usbus4: 480Mbps High Speed USB v2.0
 ata0: reset tp1 mask=03 ostat0=50 ostat1=50
 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
 ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
 ata0: reset tp2 stat0=50 stat1=50 devices=0x3
 ugen0.1: <Intel> at usbus0
 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
 ugen1.1: <Intel> at usbus1
 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
 ugen2.1: <Intel> at usbus2
 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
 ugen3.1: <Intel> at usbus3
 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
 ugen4.1: <Intel> at usbus4
 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
 ata2: SATA reset: ports status=0x01
 ata2: p0: hard reset ...
 ata2: p0: hard reset failed
 ata2: p1: hard reset ...
 ata2: p1: hard reset failed
 ata3: SATA reset: ports status=0x0a
 ata3: p0: hard reset ...
 ata3: p0: hard reset failed
 ata3: p1: hard reset ...
 ata3: p1: hard reset failed
 The GEOM class LABEL is already loaded.
 GEOM: new disk ada0
 ada0 at ata0 bus 0 scbus0 target 0 lun 0
 ada0: <WDC WD2000BB-55GUA0 08.02D08> ATA-6 device
 ada0: Serial Number WD-WCAL71709877
 ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
 ada0: 190782MB (390721968 512 byte sectors: 16H 63S/T 16383C)
 ada1 at ata0 bus 0 scbus0 target 1 lun 0
 ada1: <HDS725050KLAT80 K2AOAB0A> ATA-7 device
 ada1: Serial Number KRVA0AZBGXHEMJ
 ada1: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
 ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
 pass0 at ata0 bus 0 scbus0 target 0 lun 0
 pass0: <WDC WD2000BB-55GUA0 08.02D08> ATA-6 device
 pass0: Serial Number WD-WCAL71709877
 pass0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
 pass1 at ata0 bus 0 scbus0 target 1 lun 0
 pass1: <HDS725050KLAT80 K2AOAB0A> ATA-7 device
 pass1: Serial Number KRVA0AZBGXHEMJ
 pass1: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
 lapic1: Forcing LINT1 to edge trigger
 SMP: AP CPU #1 Launched!
 cpu1 AP:
      ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48
 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 49
 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 50
 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 51
 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 1 vector 52
 msi: Assigning MSI IRQ 257 to local APIC 1 vector 53
 SMP: passed TSC synchronization test
 TSC timecounter discards lower 8 bit(s)
 Timecounter "TSC-low" frequency 11689718 Hz quality 1000
 uhub0: 2 ports with 2 removable, self powered
 uhub1: 2 ports with 2 removable, self powered
 uhub2: 2 ports with 2 removable, self powered
 uhub3: 2 ports with 2 removable, self powered
 GEOM: new disk ada1
 Root mount waiting for: usbus4
 Root mount waiting for: usbus4
 Root mount waiting for: usbus4
 uhub4: 8 ports with 8 removable, self powered
 Root mount waiting for: usbus4
 Trying to mount root from ufs:/dev/ufsid/50911449207a744a [rw]...
 start_init: trying /sbin/init
 ugen0.2: <Microsoft> at usbus0
 ums0: <Microsoft Microsoft Basic Optical Mouse, class 0/0, rev
 1.10/3.90, addr 2> on usbus0
 ums0: 3 buttons and [XYZ] coordinates ID=0
 ugen2.2: <GASIA> at usbus2
 ukbd0: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 2> on usbus2
 kbd2 at ukbd0
 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
 ugen0.3: <vendor 0x046a> at usbus0
 ums2: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 2> on usbus2
 ukbd1: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/2.20, addr
 3> on usbus0
 ums2: 5 buttons and [XYZ] coordinates ID=1
 kbd3 at ukbd1
 kbd3: ukbd1, generic (0), config:0x0, flags:0x3d0000
 uhid0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/2.20, addr
 3> on usbus0
 lagg0: bpf attached
 splash: image decoder found: logo_saver
 ========
>Unformatted:
