From nobody@FreeBSD.org  Fri May 21 08:43:19 2010
Return-Path: <nobody@FreeBSD.org>
Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34])
	by hub.freebsd.org (Postfix) with ESMTP id 5170F106566C
	for <freebsd-gnats-submit@FreeBSD.org>; Fri, 21 May 2010 08:43:19 +0000 (UTC)
	(envelope-from nobody@FreeBSD.org)
Received: from www.freebsd.org (www.freebsd.org [IPv6:2001:4f8:fff6::21])
	by mx1.freebsd.org (Postfix) with ESMTP id 40D378FC18
	for <freebsd-gnats-submit@FreeBSD.org>; Fri, 21 May 2010 08:43:19 +0000 (UTC)
Received: from www.freebsd.org (localhost [127.0.0.1])
	by www.freebsd.org (8.14.3/8.14.3) with ESMTP id o4L8hI60081547
	for <freebsd-gnats-submit@FreeBSD.org>; Fri, 21 May 2010 08:43:18 GMT
	(envelope-from nobody@www.freebsd.org)
Received: (from nobody@localhost)
	by www.freebsd.org (8.14.3/8.14.3/Submit) id o4L8hI7C081545;
	Fri, 21 May 2010 08:43:18 GMT
	(envelope-from nobody)
Message-Id: <201005210843.o4L8hI7C081545@www.freebsd.org>
Date: Fri, 21 May 2010 08:43:18 GMT
From: "Vassily V. Kiryanov" <kvas@bf.pstu.ac.ru>
To: freebsd-gnats-submit@FreeBSD.org
Subject: New PCI devID for if_fxp driver (tested, worked)
X-Send-Pr-Version: www-3.1
X-GNATS-Notify:

>Number:         146788
>Category:       kern
>Synopsis:       [fxp] [patch] New PCI devID for if_fxp driver (tested, worked)
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    yongari
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          update
>Submitter-Id:   current-users
>Arrival-Date:   Fri May 21 08:50:20 UTC 2010
>Closed-Date:    Fri May 28 16:40:18 UTC 2010
>Last-Modified:  Fri May 28 16:40:18 UTC 2010
>Originator:     Vassily V. Kiryanov
>Release:        6.4, 7.3, 8.0
>Organization:
Berezniki branch of Perm-state technical university
>Environment:
FreeBSD black.bf.pstu.ru 8.0-RELEASE-p2 FreeBSD 8.0-RELEASE-p2 #0: Tue Jan  5 16:02:27 UTC 2010     root@i386-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC  i386
>Description:
My Intel netcard was not detected by FreeBSD 7.0 & 7.3
I have added it's PCI DevID and RevID to if_fxp driver and now it works fine.
Patch is trivial, the added line looks simple:

{ 0x1201,   0x08,   "Intel GD82559 PRO/100+ Ethernet" },

the mark of the chip and netcard's name was printed on them.

>How-To-Repeat:
Insert such card in a PC, than reboot and see dmesg.
>Fix:
Adding one line and recompile/reinstall GENERIC kernel. Tested and worked.


>Release-Note:
>Audit-Trail:

From: Garrett Cooper <yanefbsd@gmail.com>
To: "Vassily V. Kiryanov" <kvas@bf.pstu.ac.ru>
Cc: freebsd-gnats-submit@freebsd.org
Subject: Re: kern/146788: New PCI devID for if_fxp driver (tested, worked)
Date: Fri, 21 May 2010 02:36:30 -0700

 I realize this seems silly, but could you provide a real patch please?
 Thanks,
 -Garrett
State-Changed-From-To: open->feedback 
State-Changed-By: linimon 
State-Changed-When: Fri May 21 20:51:04 UTC 2010 
State-Changed-Why:  
Note that feedback was requested. 


Responsible-Changed-From-To: freebsd-bugs->freebsd-net 
Responsible-Changed-By: linimon 
Responsible-Changed-When: Fri May 21 20:51:04 UTC 2010 
Responsible-Changed-Why:  
Reassign. 

http://www.freebsd.org/cgi/query-pr.cgi?pr=146788 
Responsible-Changed-From-To: freebsd-net->yongari 
Responsible-Changed-By: yongari 
Responsible-Changed-When: Fri May 21 21:10:33 UTC 2010 
Responsible-Changed-Why:  
Grab. 

Would you show me the output of "pciconf -lcbv"? 

http://www.freebsd.org/cgi/query-pr.cgi?pr=146788 

From: kvas <kvas@bf.pstu.ac.ru>
To: bug-followup@FreeBSD.org, kvas@bf.pstu.ac.ru
Cc:  
Subject: Re: kern/146788: [fxp] [patch] New PCI devID for if_fxp driver (tested, worked)
Date: Mon, 24 May 2010 09:32:19 +0600

 Hello bug-followup,
 
 Here is the real patches, as produced by 'diff --normal if_fxp.c.orig
 if_fxp.c' command.
 
 for FreeBSD 7.3 sources:
 ========================================================================
 176a177
 >     { 0x1201, 0x08,   0, "Intel PRO/100+ GD82559 10/100 Ethernet" },
 ========================================================================
 
 for FreeBSD 8.0 sources:
 ========================================================================
 185a186
 >     { 0x1201, 0x08, "Intel GD82559 PRO/100+ Ethernet" },
 ========================================================================
 
 1) Netcards name differs a little, because at my work i have typed it
 by memory not reading from netcards sticker as at home. Choose the
 best variant at your will.
 
 2) I have not tested this netcard at 10 Mbps or half-duplex, only
 100Mbps-FD and only for PPPoE dialup to my provider. No IP was binded
 to netcards interface itself.
 
 3) pciconf -lcbv output given below:
 
 hostb0@pci0:0:0:0:      class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
     class      = bridge
     subclass   = HOST-PCI
     bar   [10] = type Prefetchable Memory, range 32, base 0x44000000, size 67108864, enabled
     cap 02[a0] = AGP 2x 1x SBA disabled
 pcib1@pci0:0:1:0:       class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
     vendor     = 'Intel Corporation'
     device     = '440BX/ZX AGPset PCI-to-PCI bridge (82443BX/ZX)'
     class      = bridge
     subclass   = PCI-PCI
 fxp0@pci0:0:16:0:       class=0x020000 card=0x000b8086 chip=0x12298086 rev=0x08 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
     class      = network
     subclass   = ethernet
     bar   [10] = type Memory, range 32, base 0x48200000, size 4096, enabled
     bar   [14] = type I/O Port, range 32, base 0x1400, size 64, enabled
     bar   [18] = type Memory, range 32, base 0x48100000, size 1048576, enabled
     cap 01[dc] = powerspec 2  supports D0 D1 D2 D3  current D0
 isab0@pci0:0:20:0:      class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M ISBridgeA  (82371AB/EB/MB)'
     class      = bridge
     subclass   = PCI-ISA
 atapci0@pci0:0:20:1:    class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M IDE Controller (82371AB/EB/MB)'
     class      = mass storage
     subclass   = ATA
     bar   [20] = type I/O Port, range 32, base 0x1460, size 16, enabled
 uhci0@pci0:0:20:2:      class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M USB Interface (82371AB/EB/MB)'
     class      = serial bus
     subclass   = USB
     bar   [20] = type I/O Port, range 32, base 0x1440, size 32, enabled
 none0@pci0:0:20:3:      class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M Power Management Controller (82371AB/EB/MB)'
     class      = bridge
 vgapci0@pci0:1:0:0:     class=0x030000 card=0x00000000 chip=0x002c10de rev=0x15 hdr=0x00
     vendor     = 'Nvidia Corp'
     device     = 'VANTA / VANTA LT [NVVANTA]'
     class      = display
     subclass   = VGA
     bar   [10] = type Memory, range 32, base 0x40000000, size 16777216, enabled
     bar   [14] = type Prefetchable Memory, range 32, base 0x42000000, size 33554432, enabled
     cap 01[60] = powerspec 1  supports D0 D3  current D0
     cap 02[44] = AGP 4x 2x 1x disabled
 
 -- 
 Best regards,
  kvas                          mailto:kvas@bf.pstu.ac.ru
 

From: Pyun YongHyeon <pyunyh@gmail.com>
To: kvas <kvas@bf.pstu.ac.ru>
Cc: bug-followup@FreeBSD.org
Subject: Re: kern/146788: [fxp] [patch] New PCI devID for if_fxp driver (tested, worked)
Date: Tue, 25 May 2010 09:41:55 -0700

 On Tue, May 25, 2010 at 09:35:45AM +0600, kvas wrote:
 > Hello Pyun,
 > 
 
 [...]
 
 > So strange it looks for me too. But i am sure that
 > 
 > 1) without this patch the GENERIC kernels from 7.0-Release and
 > 7.3-Release was not able to detect my netcard as a netcard, only as an
 > unknown device
 > 
 
 Hmm, none of your device has 0x1201 id. I have no idea how this can
 happen. And the second question is where did you know device id
 0x1201 is your controller's id?
 The only wild guess I can think of is ACPI related thing or
 half-inserted NIC controller. Please check whether your controller
 is firmly inserted into your box.
 
 > 2) after adding the patch to the 7.3-Release GENERIC kernel i have
 > sucessfully worked thru this netcard with my Internet provider for
 > some hours
 > 
 > 3) of cause in such situation better to recheck, and this evening at
 > home i shall boot the comp with original GENERIC and modified GENERIC
 > kernels, and take output from verbose dmesg and pciconf -lcbv in both
 > variants. Then i shall follow-up it to PR.
 > 
 
 Ok, please check it again. Also the patch you posted couldn't be
 applied to 7.3-RELEASE because I changed "struct fxp_ident"
 structure. So I wonder how you successfully built a kernel on
 7.3-RELEASE with the patch.

From: kvas <kvas@bf.pstu.ac.ru>
To: Pyun YongHyeon <pyunyh@gmail.com>
Cc: yongari@FreeBSD.org, bug-followup@FreeBSD.org
Subject: Re[2]: kern/146788: [fxp] [patch] New PCI devID for if_fxp driver (tested, worked)
Date: Wed, 26 May 2010 11:45:28 +0600

 Hello Pyun,
 
 Tuesday, May 25, 2010, 10:41:55 PM, you wrote:
 
 
 PY> [...]
 
 >> So strange it looks for me too. But i am sure that
 >> 
 >> 1) without this patch the GENERIC kernels from 7.0-Release and
 >> 7.3-Release was not able to detect my netcard as a netcard, only as an
 >> unknown device
 >> 
 
 PY> Hmm, none of your device has 0x1201 id. I have no idea how this can
 PY> happen. And the second question is where did you know device id
 PY> 0x1201 is your controller's id?
 PY> The only wild guess I can think of is ACPI related thing or
 PY> half-inserted NIC controller. Please check whether your controller
 PY> is firmly inserted into your box.
 
 >> 2) after adding the patch to the 7.3-Release GENERIC kernel i have
 >> sucessfully worked thru this netcard with my Internet provider for
 >> some hours
 >> 
 >> 3) of cause in such situation better to recheck, and this evening at
 >> home i shall boot the comp with original GENERIC and modified GENERIC
 >> kernels, and take output from verbose dmesg and pciconf -lcbv in both
 >> variants. Then i shall follow-up it to PR.
 >> 
 
 PY> Ok, please check it again. Also the patch you posted couldn't be
 PY> applied to 7.3-RELEASE because I changed "struct fxp_ident"
 PY> structure. So I wonder how you successfully built a kernel on
 PY> 7.3-RELEASE with the patch.
 
 I have tested situation with this netcard some more. In the 1-st, 2-nd
 and 4-th PCI slots of motherboard (Compaq Deskpro EP/SB series) it
 detects as "chip=0x12298086 rev=0x08" which values are recognized fine
 with fxp driver without my patch. But in the 3-rd PCI slot the netcard
 identification for FreeBSD (7.3-Release GENERIC) may be differ.
 Yesterday evening it was detected "chip=0x12280086 rev=0x08" and
 19/05/2010 values was "vendor=0x8086, dev=0x1201, revid=0x08".
 
 I am unsure about the reasons of this strange behaviour. The insertion
 of netcard was really firm enough. This motherboard is known partially
 faulty, at least its floppy drive controller. May be hardware problems
 includes not only FDC, but a PCI-slot3 too. Or the reason may be in
 ACPI and design of the motherboard. Motherboards PCI-slot3 shares its
 IRQ with AGP-slot (AGP contains Nvidia Vanta controller), can it be
 the reason? And in PCI-slot4 which IRQ shared with onboards USB
 controller the netcard detects and works fine. Now i have settled
 netcard in PCI-slot2 and plan to leave it here for long time.
 
 Thank you for the attention to my problem and giving me impulse to
 continue investigation. If you have an interest, below i include files
 of verbose dmesg and "pciconf -lcbv" results for netcard placed in all
 four slots. The output of "pciconf -lcbv" for slots 1,2,4 have equal
 file length, and for slot3 the file length differs.
 
 =========== dmesg.boot_19-05-2010.slot3 (fragment) =================
 found-> vendor=0x8086, dev=0x1201, revid=0x08
         domain=0, bus=0, slot=14, func=0
         class=02-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0004, statreg=0x8290, cachelnsz=8 (dwords)
         lattimer=0x42 (1980 ns), mingnt=0x00 (0 ns), maxlat=0x38 (14000 ns)
         intpin=a, irq=255
         powerspec 2  supports D0 D1 D2 D3  current D0
         map[10]: type Memory, range 32, base 0, size 12, memory disabled
         map[14]: type I/O Port, range 32, base 0, size  6, port disabled
         map[18]: type Memory, range 32, base 0, size 20, memory disabled
 ====================================================================
 
 =========== dmesg.boot_verbose.slot1 ===============================
 Copyright (c) 1992-2010 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 7.3-RELEASE #0: Sun Mar 21 06:15:01 UTC 2010
     root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ea2000.
 Preloaded elf module "/boot/kernel/ipfw.ko" at 0xc0ea2138.
 Preloaded elf module "/boot/kernel/speaker.ko" at 0xc0ea21e4.
 Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ea2290.
 Calibrating clock(s) ... i8254 clock: 1193217 Hz
 CLK_USE_I8254_CALIBRATION not specified - using default frequency
 Timecounter "i8254" frequency 1193182 Hz quality 0
 Calibrating TSC clock ... TSC clock: 398270500 Hz
 CPU: Pentium II/Pentium II Xeon/Celeron (398.27-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
   Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
 
 Instruction TLB: 4 KB pages, 4-way set associative, 32 entries
 Instruction TLB: 4 MB pages, fully associative, 2 entries
 Data TLB: 4 KB pages, 4-way set associative, 64 entries
 2nd-level cache: 512 KB, 4-way set associative, 32 byte line size
 1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size
 Data TLB: 4 MB Pages, 4-way set associative, 8 entries
 1st-level data cache: 16 KB, 4-way set associative, 32 byte line size
 real memory  = 134217728 (128 MB)
 Physical memory chunk(s):
 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
 0x0000000001025000 - 0x0000000007d7dfff, 114659328 bytes (27993 pages)
 avail memory = 117198848 (111 MB)
 bios32: Found BIOS32 Service Directory header at 0xc00fa000
 bios32: Entry = 0xecb00 (c00ecb00)  Rev = 0  Len = 1
 pcibios: PCI BIOS entry at 0xecb00+0x1020
 pnpbios: Found PnP BIOS data at 0xc00f7dd0
 pnpbios: Entry = f0000:64a6  Rev = 1.0
 pnpbios: OEM ID b6b0110e
 Other BIOS signatures found:
 ULE: setup cpu group 0
 ULE: setup cpu 0
 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
 wlan: <802.11 Link Layer>
 wlan_amrr: <AMRR Transmit Rate Control Algorithm>
 random: <entropy source, Software, Yarrow>
 nfslock: pseudo-device
 io: <I/O>
 kbd: new array size 4
 kbd1 at kbdmux0
 mem: <memory>
 Pentium Pro MTRR support enabled
 null: <null device, zero device>
 hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Mar 21 2010 06:13:51)
 ACPI: RSDP @ 0x0xe0010/0x0014 (v  0 COMPAQ)
 ACPI: RSDT @ 0x0xe0080/0x0030 (v  1 COMPAQ CPQB0B6  0x19990822      0x00000000)
 ACPI: FACP @ 0x0xe00cc/0x0074 (v  1 COMPAQ CONTACT  0x00000001      0x00000000)
 ACPI: DSDT @ 0x0xe0140/0x0933 (v  1 COMPAQ     DSDT 0x00000001 MSFT 0x0100000B)
 ACPI: FACS @ 0x0xe0040/0x0040
 ACPI: SSDT @ 0x0xe0a73/0x0F1C (v  1 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000B)
 ACPI: SSDT @ 0x0xe198f/0x071E (v  1 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000B)
 npx0: INT 16 interface
 acpi0: <COMPAQ CPQB0B6> on motherboard
 acpi0: [MPSAFE]
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 acpi0: wakeup code va 0xc1b5d000 pa 0x1000
 pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000058
 pci_open(1a):   mode1res=0x80000000 (0x80000000)
 pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=71908086)
 pcibios: BIOS version 2.10
 acpi_bus_number: root bus has no _BBN, assuming 0
 AcpiOsDerivePciId: \\_SB_.PCI0.IBRG.PIRQ -> bus 0 dev 20 func 0
 acpi: bad write to port 0x070 (8), val 0x31
 acpi: bad read from port 0x071 (8)
 acpi: bad write to port 0x070 (8), val 0x30
 acpi: bad read from port 0x071 (8)
 acpi: bad write to port 0x070 (8), val 0x31
 acpi: bad read from port 0x071 (8)
 acpi: bad write to port 0x070 (8), val 0x30
 acpi: bad read from port 0x071 (8)
 acpi0: reservation of 0, a0000 (3) failed
 acpi0: reservation of 100000, 7f00000 (3) failed
 ACPI timer: 0/4 0/4 0/5 0/4 0/4 0/4 0/4 0/4 0/4 0/5 -> 0
 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
 pci_link0:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  3 4 5 6 7 10 11
   Validation          0   11   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pci_link1:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  3 4 5 6 7 10 11
   Validation          0  255   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pci_link2:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0    9   N     0  3 4 5 6 7 10 11
   Validation          0    9   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pci_link3:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  3 4 5 6 7 10 11
   Validation          0   11   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 ACPI: Found matching pin for 0.13.INTA at func 0: 11
 ACPI: Found matching pin for 0.20.INTD at func 2: 11
 pci0: <ACPI PCI bus> on pcib0
 pci0: domain=0, physical bus=0
 found-> vendor=0x8086, dev=0x7190, revid=0x03
         domain=0, bus=0, slot=0, func=0
         class=06-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[10]: type Prefetchable Memory, range 32, base 0x44000000, size 26, enabled
 found-> vendor=0x8086, dev=0x7191, revid=0x03
         domain=0, bus=0, slot=1, func=0
         class=06-04-00, hdrtype=0x01, mfdev=0
         cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
 found-> vendor=0x8086, dev=0x1229, revid=0x08
         domain=0, bus=0, slot=13, func=0
         class=02-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
         lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
         intpin=a, irq=11
         powerspec 2  supports D0 D1 D2 D3  current D0
         map[10]: type Memory, range 32, base 0x48100000, size 12, enabled
         map[14]: type I/O Port, range 32, base 0x1000, size  6, enabled
         map[18]: type Memory, range 32, base 0x48000000, size 20, enabled
 pcib0: matched entry for 0.13.INTA (src \\_SB_.LNKA:0)
 pcib0: slot 13 INTA routed to irq 11 via \\_SB_.LNKA
 found-> vendor=0x8086, dev=0x7110, revid=0x02
         domain=0, bus=0, slot=20, func=0
         class=06-01-00, hdrtype=0x00, mfdev=1
         cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found-> vendor=0x8086, dev=0x7111, revid=0x01
         domain=0, bus=0, slot=20, func=1
         class=01-01-80, hdrtype=0x00, mfdev=0
         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[20]: type I/O Port, range 32, base 0x1460, size  4, enabled
 found-> vendor=0x8086, dev=0x7112, revid=0x01
         domain=0, bus=0, slot=20, func=2
         class=0c-03-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=d, irq=11
         map[20]: type I/O Port, range 32, base 0x1440, size  5, enabled
 pcib0: matched entry for 0.20.INTD (src \\_SB_.LNKD:0)
 pcib0: slot 20 INTD routed to irq 11 via \\_SB_.LNKD
 found-> vendor=0x8086, dev=0x7113, revid=0x02
         domain=0, bus=0, slot=20, func=3
         class=06-80-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[90]: type I/O Port, range 32, base 0xfc00, size  4, enabled
 agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
 hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0x44000000
 agp0: allocating GATT for aperture of size 64M
 pcib1: <PCI-PCI bridge> at device 1.0 on pci0
 pcib1:   domain            0
 pcib1:   secondary bus     1
 pcib1:   subordinate bus   1
 pcib1:   I/O decode        0xf000-0xfff
 pcib1:   memory decode     0x40000000-0x40ffffff
 pcib1:   prefetched decode 0x42000000-0x43ffffff
 pci1: <PCI bus> on pcib1
 pci1: domain=0, physical bus=1
 found-> vendor=0x10de, dev=0x002c, revid=0x15
         domain=0, bus=1, slot=0, func=0
         class=03-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
         intpin=a, irq=9
         powerspec 1  supports D0 D3  current D0
         map[10]: type Memory, range 32, base 0x40000000, size 24, enabled
 pcib1: requested memory range 0x40000000-0x40ffffff: good
         map[14]: type Prefetchable Memory, range 32, base 0x42000000, size 25, enabled
 pcib1: requested memory range 0x42000000-0x43ffffff: good
 pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKC:0)
 pcib0: slot 1 INTA routed to irq 9 via \\_SB_.LNKC
 pcib1: slot 0 INTA is routed to irq 9
 vgapci0: <VGA-compatible display> mem 0x40000000-0x40ffffff,0x42000000-0x43ffffff irq 9 at device 0.0 on pci1
 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1000-0x103f mem 0x48100000-0x48100fff,0x48000000-0x480fffff irq 11 at device 13.0 on pci0
 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x48100000
 fxp0: using memory space register mapping
 fxp0: PCI IDs: 8086 1229 8086 000b 0008
 fxp0: Dynamic Standby mode is disabled
 miibus0: <MII bus> on fxp0
 inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
 inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 fxp0: bpf attached
 fxp0: Ethernet address: 00:07:e9:1a:d1:f8
 fxp0: [MPSAFE]
 fxp0: [ITHREAD]
 isab0: <PCI-ISA bridge> at device 20.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1460-0x146f at device 20.1 on pci0
 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1460
 ata0: <ATA channel 0> on atapci0
 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
 ata0: reset tp1 mask=03 ostat0=50 ostat1=00
 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
 ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
 ata0: [MPSAFE]
 ata0: [ITHREAD]
 ata1: <ATA channel 1> on atapci0
 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
 ata1: reset tp1 mask=03 ostat0=00 ostat1=00
 ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
 ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
 ata1: reset tp2 stat0=00 stat1=00 devices=0x0
 ata1: [MPSAFE]
 ata1: [ITHREAD]
 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1440-0x145f irq 11 at device 20.2 on pci0
 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1440
 uhci0: [GIANT-LOCKED]
 uhci0: [ITHREAD]
 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
 usb0: USB revision 1.0
 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 uhub0: 2 ports with 2 removable, self powered
 pci0: <bridge> at device 20.3 (no driver attached)
 acpi_button0: <Power Button> on acpi0
 speaker0: <PC speaker> port 0x61 on acpi0
 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 atkbd: the current kbd controller command byte 0047
 atkbd: keyboard ID 0x41ab (2)
 kbd0 at atkbd0
 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
 atkbd0: [GIANT-LOCKED]
 atkbd0: [ITHREAD]
 psm0: current command byte:0047
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: [ITHREAD]
 psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons
 psm0: config:00000000, flags:00000008, packet size:4
 psm0: syncmask:08, syncbits:00
 sio0: irq maps: 0x1 0x11 0x1 0x1
 sio0: irq maps: 0x1 0x11 0x1 0x1
 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 sio0: type 16550A
 sio0: [FILTER]
 sio1: irq maps: 0x1 0x9 0x1 0x1
 sio1: irq maps: 0x1 0x9 0x1 0x1
 sio1: <Standard PC COM port> port 0x2f8-0x2ff irq 3 on acpi0
 sio1: type 16550A
 sio1: [FILTER]
 fdc0: <floppy drive controller> port 0x3f2-0x3f7,0 irq 6 drq 2 on acpi0
 fdc0: No FDOUT register!
 device_attach: fdc0 attach returned 6
 cpu0: <ACPI CPU> on acpi0
 cpu0: switching to generic Cx mode
 acpi_throttle0: <ACPI CPU Throttling> on cpu0
 acpi_throttle0: P_CNT from P_BLK 0xf810
 fdc0: <floppy drive controller> port 0x3f2-0x3f7,0 irq 6 drq 2 on acpi0
 fdc0: No FDOUT register!
 device_attach: fdc0 attach returned 6
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 ex_isa_identify()
 ata: ata0 already exists; skipping it
 ata: ata1 already exists; skipping it
 atkbdc: atkbdc0 already exists; skipping it
 fdc: fdc0 already exists; skipping it
 sio: sio0 already exists; skipping it
 sio: sio1 already exists; skipping it
 pnp_identify: Trying Read_Port at 203
 pnp_identify: Trying Read_Port at 243
 pnp_identify: Trying Read_Port at 283
 pnp_identify: Trying Read_Port at 2c3
 pnp_identify: Trying Read_Port at 303
 pnp_identify: Trying Read_Port at 343
 pnp_identify: Trying Read_Port at 383
 pnp_identify: Trying Read_Port at 3c3
 PNP Identify complete
 sc: sc0 already exists; skipping it
 vga: vga0 already exists; skipping it
 isa_probe_children: disabling PnP devices
 isa_probe_children: probing non-PnP devices
 pmtimer0 on isa0
 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xe7fff pnpid ORM0000 on isa0
 adv0: not probed (disabled)
 aha0: not probed (disabled)
 aic0: not probed (disabled)
 bt0: not probed (disabled)
 cs0: not probed (disabled)
 ed0: not probed (disabled)
 fe0: not probed (disabled)
 ie0: not probed (disabled)
 le0: not probed (disabled)
 ppc0: parallel port found at 0x378
 ppc0: using extended I/O port range
 ppc0: ECP SPP ECP+EPP SPP
 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
 ppc0: FIFO with 16/16/8 bytes threshold
 ppbus0: <Parallel port bus> on ppc0
 ppbus0: [MPSAFE]
 ppbus0: [ITHREAD]
 plip0: <PLIP network interface> on ppbus0
 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
 plip0: bpf attached
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 ppc0: [GIANT-LOCKED]
 ppc0: [ITHREAD]
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
 sio2: not probed (disabled)
 sio3: not probed (disabled)
 sn0: not probed (disabled)
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 vt0: not probed (disabled)
 isa_probe_children: probing PnP devices
 umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.41, addr 2> on uhub0
 umass0:0:0:-1: Attached to scbus0
 Device configuration finished.
 procfs registered
 Timecounter "TSC" frequency 398270500 Hz quality 800
 Timecounters tick every 1.000 msec
 vlan: initialized, using hash tables with chaining
 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
 lo0: bpf attached
 hptrr: no controller detected.
 ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
 ad0: setting PIO4 on PIIX4 chip
 ad0: setting UDMA33 on PIIX4 chip
 ad0: 19092MB <Seagate ST320011A 3.21> at ata0-master UDMA33
 ad0: 39102336 sectors [41378C/15H/63S] 16 sectors/interrupt 1 depth queue
 GEOM: new disk ad0
 ad0: Intel check1 failed
 ad0: Adaptec check1 failed
 ad0: LSI (v3) check1 failed
 ad0: LSI (v2) check1 failed
 ad0: FreeBSD check1 failed
 acd0: setting PIO4 on PIIX4 chip
 acd0: setting UDMA33 on PIIX4 chip
 acd0: <PIONEER DVD-RW DVR-110D/1.17> DVDR drive at ata0 as slave
 acd0: read 6890KB/s (6890KB/s) write 5511KB/s (6890KB/s), 2000KB buffer, UDMA33
 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
 acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
 acd0: Audio: play, 256 volume levels
 acd0: Mechanism: ejectable tray, unlocked
 acd0: Medium: no/blank disc
 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
 (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
 (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
 (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
 (probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
 (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
 (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
 Retrying Command (per Sense Data)
 (probe0:umass-sim0:0:0:0): Retrying Command
 GEOM: new disk da0
 pass0 at umass-sim0 bus 0 target 0 lun 0
 pass0: <JetFlash TS4GJF185 8.07> Removable Direct Access SCSI-2 device 
 pass0: 1.000MB/s transfers
 ATA PseudoRAID loaded
 da0 at umass-sim0 bus 0 target 0 lun 0
 da0: <JetFlash TS4GJF185 8.07> Removable Direct Access SCSI-2 device 
 da0: 1.000MB/s transfers
 da0: 3911MB (8011774 512 byte sectors: 255H 63S/T 498C)
 Trying to mount root from ufs:/dev/ad0s2a
 start_init: trying /sbin/init
 tun0: bpf attached
 WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
 ====================================================================
 
 =========== pciconf-lcbv.slot1 =====================================
 hostb0@pci0:0:0:0:      class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
     class      = bridge
     subclass   = HOST-PCI
     bar   [10] = type Prefetchable Memory, range 32, base 0x44000000, size 67108864, enabled
     cap 02[a0] = AGP 2x 1x SBA disabled
 pcib1@pci0:0:1:0:       class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
     vendor     = 'Intel Corporation'
     device     = '440BX/ZX AGPset PCI-to-PCI bridge (82443BX/ZX)'
     class      = bridge
     subclass   = PCI-PCI
 fxp0@pci0:0:13:0:       class=0x020000 card=0x000b8086 chip=0x12298086 rev=0x08 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
     class      = network
     subclass   = ethernet
     bar   [10] = type Memory, range 32, base 0x48100000, size 4096, enabled
     bar   [14] = type I/O Port, range 32, base 0x1000, size 64, enabled
     bar   [18] = type Memory, range 32, base 0x48000000, size 1048576, enabled
     cap 01[dc] = powerspec 2  supports D0 D1 D2 D3  current D0
 isab0@pci0:0:20:0:      class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M ISBridgeA  (82371AB/EB/MB)'
     class      = bridge
     subclass   = PCI-ISA
 atapci0@pci0:0:20:1:    class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M IDE Controller (82371AB/EB/MB)'
     class      = mass storage
     subclass   = ATA
     bar   [20] = type I/O Port, range 32, base 0x1460, size 16, enabled
 uhci0@pci0:0:20:2:      class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M USB Interface (82371AB/EB/MB)'
     class      = serial bus
     subclass   = USB
     bar   [20] = type I/O Port, range 32, base 0x1440, size 32, enabled
 none0@pci0:0:20:3:      class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M Power Management Controller (82371AB/EB/MB)'
     class      = bridge
 vgapci0@pci0:1:0:0:     class=0x030000 card=0x00000000 chip=0x002c10de rev=0x15 hdr=0x00
     vendor     = 'Nvidia Corp'
     device     = 'VANTA / VANTA LT [NVVANTA]'
     class      = display
     subclass   = VGA
     bar   [10] = type Memory, range 32, base 0x40000000, size 16777216, enabled
     bar   [14] = type Prefetchable Memory, range 32, base 0x42000000, size 33554432, enabled
     cap 01[60] = powerspec 1  supports D0 D3  current D0
     cap 02[44] = AGP 4x 2x 1x disabled
 ====================================================================
 
 =========== dmesg.boot_verbose.slot2 ===============================
 Copyright (c) 1992-2010 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 7.3-RELEASE #0: Sun Mar 21 06:15:01 UTC 2010
     root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ea2000.
 Preloaded elf module "/boot/kernel/ipfw.ko" at 0xc0ea2138.
 Preloaded elf module "/boot/kernel/speaker.ko" at 0xc0ea21e4.
 Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ea2290.
 Calibrating clock(s) ... i8254 clock: 1193218 Hz
 CLK_USE_I8254_CALIBRATION not specified - using default frequency
 Timecounter "i8254" frequency 1193182 Hz quality 0
 Calibrating TSC clock ... TSC clock: 398270700 Hz
 CPU: Pentium II/Pentium II Xeon/Celeron (398.27-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
   Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
 
 Instruction TLB: 4 KB pages, 4-way set associative, 32 entries
 Instruction TLB: 4 MB pages, fully associative, 2 entries
 Data TLB: 4 KB pages, 4-way set associative, 64 entries
 2nd-level cache: 512 KB, 4-way set associative, 32 byte line size
 1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size
 Data TLB: 4 MB Pages, 4-way set associative, 8 entries
 1st-level data cache: 16 KB, 4-way set associative, 32 byte line size
 real memory  = 134217728 (128 MB)
 Physical memory chunk(s):
 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
 0x0000000001025000 - 0x0000000007d7dfff, 114659328 bytes (27993 pages)
 avail memory = 117198848 (111 MB)
 bios32: Found BIOS32 Service Directory header at 0xc00fa000
 bios32: Entry = 0xecb00 (c00ecb00)  Rev = 0  Len = 1
 pcibios: PCI BIOS entry at 0xecb00+0x1020
 pnpbios: Found PnP BIOS data at 0xc00f7dd0
 pnpbios: Entry = f0000:64a6  Rev = 1.0
 pnpbios: OEM ID b6b0110e
 Other BIOS signatures found:
 ULE: setup cpu group 0
 ULE: setup cpu 0
 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
 wlan: <802.11 Link Layer>
 wlan_amrr: <AMRR Transmit Rate Control Algorithm>
 random: <entropy source, Software, Yarrow>
 nfslock: pseudo-device
 io: <I/O>
 kbd: new array size 4
 kbd1 at kbdmux0
 mem: <memory>
 Pentium Pro MTRR support enabled
 null: <null device, zero device>
 hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Mar 21 2010 06:13:51)
 ACPI: RSDP @ 0x0xe0010/0x0014 (v  0 COMPAQ)
 ACPI: RSDT @ 0x0xe0080/0x0030 (v  1 COMPAQ CPQB0B6  0x19990822      0x00000000)
 ACPI: FACP @ 0x0xe00cc/0x0074 (v  1 COMPAQ CONTACT  0x00000001      0x00000000)
 ACPI: DSDT @ 0x0xe0140/0x0933 (v  1 COMPAQ     DSDT 0x00000001 MSFT 0x0100000B)
 ACPI: FACS @ 0x0xe0040/0x0040
 ACPI: SSDT @ 0x0xe0a73/0x0F1C (v  1 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000B)
 ACPI: SSDT @ 0x0xe198f/0x071E (v  1 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000B)
 npx0: INT 16 interface
 acpi0: <COMPAQ CPQB0B6> on motherboard
 acpi0: [MPSAFE]
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 acpi0: wakeup code va 0xc1b5d000 pa 0x1000
 pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000058
 pci_open(1a):   mode1res=0x80000000 (0x80000000)
 pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=71908086)
 pcibios: BIOS version 2.10
 acpi_bus_number: root bus has no _BBN, assuming 0
 AcpiOsDerivePciId: \\_SB_.PCI0.IBRG.PIRQ -> bus 0 dev 20 func 0
 acpi: bad write to port 0x070 (8), val 0x31
 acpi: bad read from port 0x071 (8)
 acpi: bad write to port 0x070 (8), val 0x30
 acpi: bad read from port 0x071 (8)
 acpi: bad write to port 0x070 (8), val 0x31
 acpi: bad read from port 0x071 (8)
 acpi: bad write to port 0x070 (8), val 0x30
 acpi: bad read from port 0x071 (8)
 acpi0: reservation of 0, a0000 (3) failed
 acpi0: reservation of 100000, 7f00000 (3) failed
 ACPI timer: 0/4 0/5 0/16777209 0/16777200 0/4 0/5 0/4 0/5 0/4 0/5 -> 0
 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
 pci_link0:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  3 4 5 6 7 10 11
   Validation          0  255   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pci_link1:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  3 4 5 6 7 10 11
   Validation          0   11   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pci_link2:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0    9   N     0  3 4 5 6 7 10 11
   Validation          0    9   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pci_link3:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  3 4 5 6 7 10 11
   Validation          0   11   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 ACPI: Found matching pin for 0.14.INTA at func 0: 11
 ACPI: Found matching pin for 0.20.INTD at func 2: 11
 pci0: <ACPI PCI bus> on pcib0
 pci0: domain=0, physical bus=0
 found-> vendor=0x8086, dev=0x7190, revid=0x03
         domain=0, bus=0, slot=0, func=0
         class=06-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[10]: type Prefetchable Memory, range 32, base 0x44000000, size 26, enabled
 found-> vendor=0x8086, dev=0x7191, revid=0x03
         domain=0, bus=0, slot=1, func=0
         class=06-04-00, hdrtype=0x01, mfdev=0
         cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
 found-> vendor=0x8086, dev=0x1229, revid=0x08
         domain=0, bus=0, slot=14, func=0
         class=02-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
         lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
         intpin=a, irq=11
         powerspec 2  supports D0 D1 D2 D3  current D0
         map[10]: type Memory, range 32, base 0x48100000, size 12, enabled
         map[14]: type I/O Port, range 32, base 0x1000, size  6, enabled
         map[18]: type Memory, range 32, base 0x48000000, size 20, enabled
 pcib0: matched entry for 0.14.INTA (src \\_SB_.LNKB:0)
 pcib0: slot 14 INTA routed to irq 11 via \\_SB_.LNKB
 found-> vendor=0x8086, dev=0x7110, revid=0x02
         domain=0, bus=0, slot=20, func=0
         class=06-01-00, hdrtype=0x00, mfdev=1
         cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found-> vendor=0x8086, dev=0x7111, revid=0x01
         domain=0, bus=0, slot=20, func=1
         class=01-01-80, hdrtype=0x00, mfdev=0
         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[20]: type I/O Port, range 32, base 0x1460, size  4, enabled
 found-> vendor=0x8086, dev=0x7112, revid=0x01
         domain=0, bus=0, slot=20, func=2
         class=0c-03-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=d, irq=11
         map[20]: type I/O Port, range 32, base 0x1440, size  5, enabled
 pcib0: matched entry for 0.20.INTD (src \\_SB_.LNKD:0)
 pcib0: slot 20 INTD routed to irq 11 via \\_SB_.LNKD
 found-> vendor=0x8086, dev=0x7113, revid=0x02
         domain=0, bus=0, slot=20, func=3
         class=06-80-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[90]: type I/O Port, range 32, base 0xfc00, size  4, enabled
 agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
 hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0x44000000
 agp0: allocating GATT for aperture of size 64M
 pcib1: <PCI-PCI bridge> at device 1.0 on pci0
 pcib1:   domain            0
 pcib1:   secondary bus     1
 pcib1:   subordinate bus   1
 pcib1:   I/O decode        0xf000-0xfff
 pcib1:   memory decode     0x40000000-0x40ffffff
 pcib1:   prefetched decode 0x42000000-0x43ffffff
 pci1: <PCI bus> on pcib1
 pci1: domain=0, physical bus=1
 found-> vendor=0x10de, dev=0x002c, revid=0x15
         domain=0, bus=1, slot=0, func=0
         class=03-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
         intpin=a, irq=9
         powerspec 1  supports D0 D3  current D0
         map[10]: type Memory, range 32, base 0x40000000, size 24, enabled
 pcib1: requested memory range 0x40000000-0x40ffffff: good
         map[14]: type Prefetchable Memory, range 32, base 0x42000000, size 25, enabled
 pcib1: requested memory range 0x42000000-0x43ffffff: good
 pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKC:0)
 pcib0: slot 1 INTA routed to irq 9 via \\_SB_.LNKC
 pcib1: slot 0 INTA is routed to irq 9
 vgapci0: <VGA-compatible display> mem 0x40000000-0x40ffffff,0x42000000-0x43ffffff irq 9 at device 0.0 on pci1
 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1000-0x103f mem 0x48100000-0x48100fff,0x48000000-0x480fffff irq 11 at device 14.0 on pci0
 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x48100000
 fxp0: using memory space register mapping
 fxp0: PCI IDs: 8086 1229 8086 000b 0008
 fxp0: Dynamic Standby mode is disabled
 miibus0: <MII bus> on fxp0
 inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
 inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 fxp0: bpf attached
 fxp0: Ethernet address: 00:07:e9:1a:d1:f8
 fxp0: [MPSAFE]
 fxp0: [ITHREAD]
 isab0: <PCI-ISA bridge> at device 20.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1460-0x146f at device 20.1 on pci0
 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1460
 ata0: <ATA channel 0> on atapci0
 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
 ata0: reset tp1 mask=03 ostat0=50 ostat1=00
 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
 ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
 ata0: [MPSAFE]
 ata0: [ITHREAD]
 ata1: <ATA channel 1> on atapci0
 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
 ata1: reset tp1 mask=03 ostat0=00 ostat1=00
 ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
 ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
 ata1: reset tp2 stat0=00 stat1=00 devices=0x0
 ata1: [MPSAFE]
 ata1: [ITHREAD]
 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1440-0x145f irq 11 at device 20.2 on pci0
 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1440
 uhci0: [GIANT-LOCKED]
 uhci0: [ITHREAD]
 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
 usb0: USB revision 1.0
 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 uhub0: 2 ports with 2 removable, self powered
 pci0: <bridge> at device 20.3 (no driver attached)
 acpi_button0: <Power Button> on acpi0
 speaker0: <PC speaker> port 0x61 on acpi0
 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 atkbd: the current kbd controller command byte 0047
 atkbd: keyboard ID 0x41ab (2)
 kbd0 at atkbd0
 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
 atkbd0: [GIANT-LOCKED]
 atkbd0: [ITHREAD]
 psm0: current command byte:0047
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: [ITHREAD]
 psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons
 psm0: config:00000000, flags:00000008, packet size:4
 psm0: syncmask:08, syncbits:00
 sio0: irq maps: 0x1 0x11 0x1 0x1
 sio0: irq maps: 0x1 0x11 0x1 0x1
 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 sio0: type 16550A
 sio0: [FILTER]
 sio1: irq maps: 0x1 0x9 0x1 0x1
 sio1: irq maps: 0x1 0x9 0x1 0x1
 sio1: <Standard PC COM port> port 0x2f8-0x2ff irq 3 on acpi0
 sio1: type 16550A
 sio1: [FILTER]
 fdc0: <floppy drive controller> port 0x3f2-0x3f7,0 irq 6 drq 2 on acpi0
 fdc0: No FDOUT register!
 device_attach: fdc0 attach returned 6
 cpu0: <ACPI CPU> on acpi0
 cpu0: switching to generic Cx mode
 acpi_throttle0: <ACPI CPU Throttling> on cpu0
 acpi_throttle0: P_CNT from P_BLK 0xf810
 fdc0: <floppy drive controller> port 0x3f2-0x3f7,0 irq 6 drq 2 on acpi0
 fdc0: No FDOUT register!
 device_attach: fdc0 attach returned 6
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 ex_isa_identify()
 ata: ata0 already exists; skipping it
 ata: ata1 already exists; skipping it
 atkbdc: atkbdc0 already exists; skipping it
 fdc: fdc0 already exists; skipping it
 sio: sio0 already exists; skipping it
 sio: sio1 already exists; skipping it
 pnp_identify: Trying Read_Port at 203
 pnp_identify: Trying Read_Port at 243
 pnp_identify: Trying Read_Port at 283
 pnp_identify: Trying Read_Port at 2c3
 pnp_identify: Trying Read_Port at 303
 pnp_identify: Trying Read_Port at 343
 pnp_identify: Trying Read_Port at 383
 pnp_identify: Trying Read_Port at 3c3
 PNP Identify complete
 sc: sc0 already exists; skipping it
 vga: vga0 already exists; skipping it
 isa_probe_children: disabling PnP devices
 isa_probe_children: probing non-PnP devices
 pmtimer0 on isa0
 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xe7fff pnpid ORM0000 on isa0
 adv0: not probed (disabled)
 aha0: not probed (disabled)
 aic0: not probed (disabled)
 bt0: not probed (disabled)
 cs0: not probed (disabled)
 ed0: not probed (disabled)
 fe0: not probed (disabled)
 ie0: not probed (disabled)
 le0: not probed (disabled)
 ppc0: parallel port found at 0x378
 ppc0: using extended I/O port range
 ppc0: ECP SPP ECP+EPP SPP
 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
 ppc0: FIFO with 16/16/8 bytes threshold
 ppbus0: <Parallel port bus> on ppc0
 ppbus0: [MPSAFE]
 ppbus0: [ITHREAD]
 plip0: <PLIP network interface> on ppbus0
 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
 plip0: bpf attached
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 ppc0: [GIANT-LOCKED]
 ppc0: [ITHREAD]
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
 sio2: not probed (disabled)
 sio3: not probed (disabled)
 sn0: not probed (disabled)
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 vt0: not probed (disabled)
 isa_probe_children: probing PnP devices
 umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.41, addr 2> on uhub0
 umass0:0:0:-1: Attached to scbus0
 Device configuration finished.
 procfs registered
 Timecounter "TSC" frequency 398270700 Hz quality 800
 Timecounters tick every 1.000 msec
 vlan: initialized, using hash tables with chaining
 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
 lo0: bpf attached
 hptrr: no controller detected.
 ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
 ad0: setting PIO4 on PIIX4 chip
 ad0: setting UDMA33 on PIIX4 chip
 ad0: 19092MB <Seagate ST320011A 3.21> at ata0-master UDMA33
 ad0: 39102336 sectors [41378C/15H/63S] 16 sectors/interrupt 1 depth queue
 GEOM: new disk ad0
 ad0: Intel check1 failed
 ad0: Adaptec check1 failed
 ad0: LSI (v3) check1 failed
 ad0: LSI (v2) check1 failed
 ad0: FreeBSD check1 failed
 acd0: setting PIO4 on PIIX4 chip
 acd0: setting UDMA33 on PIIX4 chip
 acd0: <PIONEER DVD-RW DVR-110D/1.17> DVDR drive at ata0 as slave
 acd0: read 6890KB/s (6890KB/s) write 5511KB/s (6890KB/s), 2000KB buffer, UDMA33
 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
 acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
 acd0: Audio: play, 256 volume levels
 acd0: Mechanism: ejectable tray, unlocked
 acd0: Medium: no/blank disc
 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
 (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
 (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
 (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
 (probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
 (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
 (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
 Retrying Command (per Sense Data)
 (probe0:umass-sim0:0:0:0): Retrying Command
 GEOM: new disk da0
 pass0 at umass-sim0 bus 0 target 0 lun 0
 pass0: <JetFlash TS4GJF185 8.07> Removable Direct Access SCSI-2 device 
 pass0: 1.000MB/s transfers
 ATA PseudoRAID loaded
 da0 at umass-sim0 bus 0 target 0 lun 0
 da0: <JetFlash TS4GJF185 8.07> Removable Direct Access SCSI-2 device 
 da0: 1.000MB/s transfers
 da0: 3911MB (8011774 512 byte sectors: 255H 63S/T 498C)
 Trying to mount root from ufs:/dev/ad0s2a
 start_init: trying /sbin/init
 tun0: bpf attached
 WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
 ====================================================================
 
 =========== pciconf-lcbv.slot2 =====================================
 hostb0@pci0:0:0:0:      class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
     class      = bridge
     subclass   = HOST-PCI
     bar   [10] = type Prefetchable Memory, range 32, base 0x44000000, size 67108864, enabled
     cap 02[a0] = AGP 2x 1x SBA disabled
 pcib1@pci0:0:1:0:       class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
     vendor     = 'Intel Corporation'
     device     = '440BX/ZX AGPset PCI-to-PCI bridge (82443BX/ZX)'
     class      = bridge
     subclass   = PCI-PCI
 fxp0@pci0:0:14:0:       class=0x020000 card=0x000b8086 chip=0x12298086 rev=0x08 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
     class      = network
     subclass   = ethernet
     bar   [10] = type Memory, range 32, base 0x48100000, size 4096, enabled
     bar   [14] = type I/O Port, range 32, base 0x1000, size 64, enabled
     bar   [18] = type Memory, range 32, base 0x48000000, size 1048576, enabled
     cap 01[dc] = powerspec 2  supports D0 D1 D2 D3  current D0
 isab0@pci0:0:20:0:      class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M ISBridgeA  (82371AB/EB/MB)'
     class      = bridge
     subclass   = PCI-ISA
 atapci0@pci0:0:20:1:    class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M IDE Controller (82371AB/EB/MB)'
     class      = mass storage
     subclass   = ATA
     bar   [20] = type I/O Port, range 32, base 0x1460, size 16, enabled
 uhci0@pci0:0:20:2:      class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M USB Interface (82371AB/EB/MB)'
     class      = serial bus
     subclass   = USB
     bar   [20] = type I/O Port, range 32, base 0x1440, size 32, enabled
 none0@pci0:0:20:3:      class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M Power Management Controller (82371AB/EB/MB)'
     class      = bridge
 vgapci0@pci0:1:0:0:     class=0x030000 card=0x00000000 chip=0x002c10de rev=0x15 hdr=0x00
     vendor     = 'Nvidia Corp'
     device     = 'VANTA / VANTA LT [NVVANTA]'
     class      = display
     subclass   = VGA
     bar   [10] = type Memory, range 32, base 0x40000000, size 16777216, enabled
     bar   [14] = type Prefetchable Memory, range 32, base 0x42000000, size 33554432, enabled
     cap 01[60] = powerspec 1  supports D0 D3  current D0
     cap 02[44] = AGP 4x 2x 1x disabled
 ====================================================================
 
 =========== dmesg.boot_verbose.slot3 ===============================
 Copyright (c) 1992-2010 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 7.3-RELEASE #0: Sun Mar 21 06:15:01 UTC 2010
     root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ea2000.
 Preloaded elf module "/boot/kernel/ipfw.ko" at 0xc0ea2138.
 Preloaded elf module "/boot/kernel/speaker.ko" at 0xc0ea21e4.
 Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ea2290.
 Calibrating clock(s) ... i8254 clock: 1193214 Hz
 CLK_USE_I8254_CALIBRATION not specified - using default frequency
 Timecounter "i8254" frequency 1193182 Hz quality 0
 Calibrating TSC clock ... TSC clock: 398271700 Hz
 CPU: Pentium II/Pentium II Xeon/Celeron (398.27-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
   Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
 
 Instruction TLB: 4 KB pages, 4-way set associative, 32 entries
 Instruction TLB: 4 MB pages, fully associative, 2 entries
 Data TLB: 4 KB pages, 4-way set associative, 64 entries
 2nd-level cache: 512 KB, 4-way set associative, 32 byte line size
 1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size
 Data TLB: 4 MB Pages, 4-way set associative, 8 entries
 1st-level data cache: 16 KB, 4-way set associative, 32 byte line size
 real memory  = 134217728 (128 MB)
 Physical memory chunk(s):
 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
 0x0000000001025000 - 0x0000000007d7dfff, 114659328 bytes (27993 pages)
 avail memory = 117198848 (111 MB)
 bios32: Found BIOS32 Service Directory header at 0xc00fa000
 bios32: Entry = 0xecb00 (c00ecb00)  Rev = 0  Len = 1
 pcibios: PCI BIOS entry at 0xecb00+0x1020
 pnpbios: Found PnP BIOS data at 0xc00f7dd0
 pnpbios: Entry = f0000:64a6  Rev = 1.0
 pnpbios: OEM ID b6b0110e
 Other BIOS signatures found:
 ULE: setup cpu group 0
 ULE: setup cpu 0
 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
 wlan: <802.11 Link Layer>
 wlan_amrr: <AMRR Transmit Rate Control Algorithm>
 random: <entropy source, Software, Yarrow>
 nfslock: pseudo-device
 io: <I/O>
 kbd: new array size 4
 kbd1 at kbdmux0
 mem: <memory>
 Pentium Pro MTRR support enabled
 null: <null device, zero device>
 hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Mar 21 2010 06:13:51)
 ACPI: RSDP @ 0x0xe0010/0x0014 (v  0 COMPAQ)
 ACPI: RSDT @ 0x0xe0080/0x0030 (v  1 COMPAQ CPQB0B6  0x19990822      0x00000000)
 ACPI: FACP @ 0x0xe00cc/0x0074 (v  1 COMPAQ CONTACT  0x00000001      0x00000000)
 ACPI: DSDT @ 0x0xe0140/0x0933 (v  1 COMPAQ     DSDT 0x00000001 MSFT 0x0100000B)
 ACPI: FACS @ 0x0xe0040/0x0040
 ACPI: SSDT @ 0x0xe0a73/0x0F1C (v  1 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000B)
 ACPI: SSDT @ 0x0xe198f/0x071E (v  1 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000B)
 npx0: INT 16 interface
 acpi0: <COMPAQ CPQB0B6> on motherboard
 acpi0: [MPSAFE]
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 acpi0: wakeup code va 0xc1b5d000 pa 0x1000
 pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000058
 pci_open(1a):   mode1res=0x80000000 (0x80000000)
 pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=71908086)
 pcibios: BIOS version 2.10
 acpi_bus_number: root bus has no _BBN, assuming 0
 AcpiOsDerivePciId: \\_SB_.PCI0.IBRG.PIRQ -> bus 0 dev 20 func 0
 acpi: bad write to port 0x070 (8), val 0x31
 acpi: bad read from port 0x071 (8)
 acpi: bad write to port 0x070 (8), val 0x30
 acpi: bad read from port 0x071 (8)
 acpi: bad write to port 0x070 (8), val 0x31
 acpi: bad read from port 0x071 (8)
 acpi: bad write to port 0x070 (8), val 0x30
 acpi: bad read from port 0x071 (8)
 acpi0: reservation of 0, a0000 (3) failed
 acpi0: reservation of 100000, 7f00000 (3) failed
 ACPI timer: 0/4 0/16777214 0/5 0/4 0/4 0/16777209 0/5 0/4 0/5 0/4 -> 0
 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
 pci_link0:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  3 4 5 6 7 10 11
   Validation          0  255   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pci_link1:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  3 4 5 6 7 10 11
   Validation          0  255   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pci_link2:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0    9   N     0  3 4 5 6 7 10 11
   Validation          0    9   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pci_link3:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  3 4 5 6 7 10 11
   Validation          0   11   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 ACPI: Found matching pin for 0.15.INTA at func 0: 255
 ACPI: Found matching pin for 0.20.INTD at func 2: 11
 pci0: <ACPI PCI bus> on pcib0
 pci0: domain=0, physical bus=0
 found-> vendor=0x8086, dev=0x7190, revid=0x03
         domain=0, bus=0, slot=0, func=0
         class=06-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0106, statreg=0xa210, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[10]: type Prefetchable Memory, range 32, base 0x44000000, size 26, enabled
 found-> vendor=0x8086, dev=0x7191, revid=0x03
         domain=0, bus=0, slot=1, func=0
         class=06-04-00, hdrtype=0x01, mfdev=0
         cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
 found-> vendor=0x0086, dev=0x1228, revid=0x08
         domain=0, bus=0, slot=15, func=0
         class=02-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0004, statreg=0x8290, cachelnsz=8 (dwords)
         lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
         intpin=a, irq=255
         powerspec 2  supports D0 D1 D2 D3  current D0
         map[10]: type Memory, range 32, base 0, size 12, memory disabled
         map[14]: type I/O Port, range 32, base 0, size  6, port disabled
         map[18]: type Memory, range 32, base 0, size 20, memory disabled
 found-> vendor=0x8086, dev=0x7110, revid=0x02
         domain=0, bus=0, slot=20, func=0
         class=06-01-00, hdrtype=0x00, mfdev=1
         cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found-> vendor=0x8086, dev=0x7111, revid=0x01
         domain=0, bus=0, slot=20, func=1
         class=01-01-80, hdrtype=0x00, mfdev=0
         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[20]: type I/O Port, range 32, base 0x1460, size  4, enabled
 found-> vendor=0x8086, dev=0x7112, revid=0x01
         domain=0, bus=0, slot=20, func=2
         class=0c-03-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=d, irq=11
         map[20]: type I/O Port, range 32, base 0x1440, size  5, enabled
 pcib0: matched entry for 0.20.INTD (src \\_SB_.LNKD:0)
 pcib0: slot 20 INTD routed to irq 11 via \\_SB_.LNKD
 found-> vendor=0x8086, dev=0x7113, revid=0x02
         domain=0, bus=0, slot=20, func=3
         class=06-80-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[90]: type I/O Port, range 32, base 0xfc00, size  4, enabled
 agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
 hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0x44000000
 agp0: allocating GATT for aperture of size 64M
 pcib1: <PCI-PCI bridge> at device 1.0 on pci0
 pcib1:   domain            0
 pcib1:   secondary bus     1
 pcib1:   subordinate bus   1
 pcib1:   I/O decode        0xf000-0xfff
 pcib1:   memory decode     0x40000000-0x40ffffff
 pcib1:   prefetched decode 0x42000000-0x43ffffff
 pci1: <PCI bus> on pcib1
 pci1: domain=0, physical bus=1
 found-> vendor=0x10de, dev=0x002c, revid=0x15
         domain=0, bus=1, slot=0, func=0
         class=03-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
         intpin=a, irq=9
         powerspec 1  supports D0 D3  current D0
         map[10]: type Memory, range 32, base 0x40000000, size 24, enabled
 pcib1: requested memory range 0x40000000-0x40ffffff: good
         map[14]: type Prefetchable Memory, range 32, base 0x42000000, size 25, enabled
 pcib1: requested memory range 0x42000000-0x43ffffff: good
 pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKC:0)
 pcib0: slot 1 INTA routed to irq 9 via \\_SB_.LNKC
 pcib1: slot 0 INTA is routed to irq 9
 vgapci0: <VGA-compatible display> mem 0x40000000-0x40ffffff,0x42000000-0x43ffffff irq 9 at device 0.0 on pci1
 pci0: <network, ethernet> at device 15.0 (no driver attached)
 isab0: <PCI-ISA bridge> at device 20.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1460-0x146f at device 20.1 on pci0
 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1460
 ata0: <ATA channel 0> on atapci0
 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
 ata0: reset tp1 mask=03 ostat0=50 ostat1=00
 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
 ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
 ata0: [MPSAFE]
 ata0: [ITHREAD]
 ata1: <ATA channel 1> on atapci0
 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
 ata1: reset tp1 mask=03 ostat0=00 ostat1=00
 ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
 ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
 ata1: reset tp2 stat0=00 stat1=00 devices=0x0
 ata1: [MPSAFE]
 ata1: [ITHREAD]
 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1440-0x145f irq 11 at device 20.2 on pci0
 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1440
 uhci0: [GIANT-LOCKED]
 uhci0: [ITHREAD]
 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
 usb0: USB revision 1.0
 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 uhub0: 2 ports with 2 removable, self powered
 pci0: <bridge> at device 20.3 (no driver attached)
 acpi_button0: <Power Button> on acpi0
 speaker0: <PC speaker> port 0x61 on acpi0
 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 atkbd: the current kbd controller command byte 0047
 atkbd: keyboard ID 0x41ab (2)
 kbd0 at atkbd0
 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
 atkbd0: [GIANT-LOCKED]
 atkbd0: [ITHREAD]
 psm0: current command byte:0047
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: [ITHREAD]
 psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons
 psm0: config:00000000, flags:00000008, packet size:4
 psm0: syncmask:08, syncbits:00
 sio0: irq maps: 0x1 0x11 0x1 0x1
 sio0: irq maps: 0x1 0x11 0x1 0x1
 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 sio0: type 16550A
 sio0: [FILTER]
 sio1: irq maps: 0x1 0x9 0x1 0x1
 sio1: irq maps: 0x1 0x9 0x1 0x1
 sio1: <Standard PC COM port> port 0x2f8-0x2ff irq 3 on acpi0
 sio1: type 16550A
 sio1: [FILTER]
 fdc0: <floppy drive controller> port 0x3f2-0x3f7,0 irq 6 drq 2 on acpi0
 fdc0: No FDOUT register!
 device_attach: fdc0 attach returned 6
 cpu0: <ACPI CPU> on acpi0
 cpu0: switching to generic Cx mode
 acpi_throttle0: <ACPI CPU Throttling> on cpu0
 acpi_throttle0: P_CNT from P_BLK 0xf810
 fdc0: <floppy drive controller> port 0x3f2-0x3f7,0 irq 6 drq 2 on acpi0
 fdc0: No FDOUT register!
 device_attach: fdc0 attach returned 6
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 ex_isa_identify()
 ata: ata0 already exists; skipping it
 ata: ata1 already exists; skipping it
 atkbdc: atkbdc0 already exists; skipping it
 fdc: fdc0 already exists; skipping it
 sio: sio0 already exists; skipping it
 sio: sio1 already exists; skipping it
 pnp_identify: Trying Read_Port at 203
 pnp_identify: Trying Read_Port at 243
 pnp_identify: Trying Read_Port at 283
 pnp_identify: Trying Read_Port at 2c3
 pnp_identify: Trying Read_Port at 303
 pnp_identify: Trying Read_Port at 343
 pnp_identify: Trying Read_Port at 383
 pnp_identify: Trying Read_Port at 3c3
 PNP Identify complete
 sc: sc0 already exists; skipping it
 vga: vga0 already exists; skipping it
 isa_probe_children: disabling PnP devices
 isa_probe_children: probing non-PnP devices
 pmtimer0 on isa0
 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xe7fff pnpid ORM0000 on isa0
 adv0: not probed (disabled)
 aha0: not probed (disabled)
 aic0: not probed (disabled)
 bt0: not probed (disabled)
 cs0: not probed (disabled)
 ed0: not probed (disabled)
 fe0: not probed (disabled)
 ie0: not probed (disabled)
 le0: not probed (disabled)
 ppc0: parallel port found at 0x378
 ppc0: using extended I/O port range
 ppc0: ECP SPP ECP+EPP SPP
 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
 ppc0: FIFO with 16/16/8 bytes threshold
 ppbus0: <Parallel port bus> on ppc0
 ppbus0: [MPSAFE]
 ppbus0: [ITHREAD]
 plip0: <PLIP network interface> on ppbus0
 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
 plip0: bpf attached
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 ppc0: [GIANT-LOCKED]
 ppc0: [ITHREAD]
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
 sio2: not probed (disabled)
 sio3: not probed (disabled)
 sn0: not probed (disabled)
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 vt0: not probed (disabled)
 isa_probe_children: probing PnP devices
 umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.41, addr 2> on uhub0
 umass0:0:0:-1: Attached to scbus0
 Device configuration finished.
 procfs registered
 Timecounter "TSC" frequency 398271700 Hz quality 800
 Timecounters tick every 1.000 msec
 vlan: initialized, using hash tables with chaining
 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
 lo0: bpf attached
 hptrr: no controller detected.
 ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
 ad0: setting PIO4 on PIIX4 chip
 ad0: setting UDMA33 on PIIX4 chip
 ad0: 19092MB <Seagate ST320011A 3.21> at ata0-master UDMA33
 ad0: 39102336 sectors [41378C/15H/63S] 16 sectors/interrupt 1 depth queue
 GEOM: new disk ad0
 ad0: Intel check1 failed
 ad0: Adaptec check1 failed
 ad0: LSI (v3) check1 failed
 ad0: LSI (v2) check1 failed
 ad0: FreeBSD check1 failed
 acd0: setting PIO4 on PIIX4 chip
 acd0: setting UDMA33 on PIIX4 chip
 acd0: <PIONEER DVD-RW DVR-110D/1.17> DVDR drive at ata0 as slave
 acd0: read 6890KB/s (6890KB/s) write 5511KB/s (6890KB/s), 2000KB buffer, UDMA33
 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
 acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
 acd0: Audio: play, 256 volume levels
 acd0: Mechanism: ejectable tray, unlocked
 acd0: Medium: no/blank disc
 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
 (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
 (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
 (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
 (probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
 (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
 (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
 Retrying Command (per Sense Data)
 (probe0:umass-sim0:0:0:0): Retrying Command
 GEOM: new disk da0
 pass0 at umass-sim0 bus 0 target 0 lun 0
 pass0: <JetFlash TS4GJF185 8.07> Removable Direct Access SCSI-2 device 
 pass0: 1.000MB/s transfers
 ATA PseudoRAID loaded
 da0 at umass-sim0 bus 0 target 0 lun 0
 da0: <JetFlash TS4GJF185 8.07> Removable Direct Access SCSI-2 device 
 da0: 1.000MB/s transfers
 da0: 3911MB (8011774 512 byte sectors: 255H 63S/T 498C)
 Trying to mount root from ufs:/dev/ad0s2a
 start_init: trying /sbin/init
 tun0: bpf attached
 WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
 ====================================================================
 
 =========== pciconf-lcbv.slot3 =====================================
 hostb0@pci0:0:0:0:      class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
     class      = bridge
     subclass   = HOST-PCI
     bar   [10] = type Prefetchable Memory, range 32, base 0x44000000, size 67108864, enabled
     cap 02[a0] = AGP 2x 1x SBA disabled
 pcib1@pci0:0:1:0:       class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
     vendor     = 'Intel Corporation'
     device     = '440BX/ZX AGPset PCI-to-PCI bridge (82443BX/ZX)'
     class      = bridge
     subclass   = PCI-PCI
 none0@pci0:0:15:0:      class=0x020000 card=0x000a0086 chip=0x12280086 rev=0x08 hdr=0x00
     class      = network
     subclass   = ethernet
     cap 01[dc] = powerspec 2  supports D0 D1 D2 D3  current D0
 isab0@pci0:0:20:0:      class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M ISBridgeA  (82371AB/EB/MB)'
     class      = bridge
     subclass   = PCI-ISA
 atapci0@pci0:0:20:1:    class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M IDE Controller (82371AB/EB/MB)'
     class      = mass storage
     subclass   = ATA
     bar   [20] = type I/O Port, range 32, base 0x1460, size 16, enabled
 uhci0@pci0:0:20:2:      class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M USB Interface (82371AB/EB/MB)'
     class      = serial bus
     subclass   = USB
     bar   [20] = type I/O Port, range 32, base 0x1440, size 32, enabled
 none1@pci0:0:20:3:      class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M Power Management Controller (82371AB/EB/MB)'
     class      = bridge
 vgapci0@pci0:1:0:0:     class=0x030000 card=0x00000000 chip=0x002c10de rev=0x15 hdr=0x00
     vendor     = 'Nvidia Corp'
     device     = 'VANTA / VANTA LT [NVVANTA]'
     class      = display
     subclass   = VGA
     bar   [10] = type Memory, range 32, base 0x40000000, size 16777216, enabled
     bar   [14] = type Prefetchable Memory, range 32, base 0x42000000, size 33554432, enabled
     cap 01[60] = powerspec 1  supports D0 D3  current D0
     cap 02[44] = AGP 4x 2x 1x disabled
 ====================================================================
 
 =========== dmesg.boot_verbose.slot4 ===============================
 Copyright (c) 1992-2010 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 7.3-RELEASE #0: Sun Mar 21 06:15:01 UTC 2010
     root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ea2000.
 Preloaded elf module "/boot/kernel/ipfw.ko" at 0xc0ea2138.
 Preloaded elf module "/boot/kernel/speaker.ko" at 0xc0ea21e4.
 Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ea2290.
 Calibrating clock(s) ... i8254 clock: 1193216 Hz
 CLK_USE_I8254_CALIBRATION not specified - using default frequency
 Timecounter "i8254" frequency 1193182 Hz quality 0
 Calibrating TSC clock ... TSC clock: 398271524 Hz
 CPU: Pentium II/Pentium II Xeon/Celeron (398.27-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
   Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
 
 Instruction TLB: 4 KB pages, 4-way set associative, 32 entries
 Instruction TLB: 4 MB pages, fully associative, 2 entries
 Data TLB: 4 KB pages, 4-way set associative, 64 entries
 2nd-level cache: 512 KB, 4-way set associative, 32 byte line size
 1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size
 Data TLB: 4 MB Pages, 4-way set associative, 8 entries
 1st-level data cache: 16 KB, 4-way set associative, 32 byte line size
 real memory  = 134217728 (128 MB)
 Physical memory chunk(s):
 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
 0x0000000001025000 - 0x0000000007d7dfff, 114659328 bytes (27993 pages)
 avail memory = 117198848 (111 MB)
 bios32: Found BIOS32 Service Directory header at 0xc00fa000
 bios32: Entry = 0xecb00 (c00ecb00)  Rev = 0  Len = 1
 pcibios: PCI BIOS entry at 0xecb00+0x1020
 pnpbios: Found PnP BIOS data at 0xc00f7dd0
 pnpbios: Entry = f0000:64a6  Rev = 1.0
 pnpbios: OEM ID b6b0110e
 Other BIOS signatures found:
 ULE: setup cpu group 0
 ULE: setup cpu 0
 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
 wlan: <802.11 Link Layer>
 wlan_amrr: <AMRR Transmit Rate Control Algorithm>
 random: <entropy source, Software, Yarrow>
 nfslock: pseudo-device
 io: <I/O>
 kbd: new array size 4
 kbd1 at kbdmux0
 mem: <memory>
 Pentium Pro MTRR support enabled
 null: <null device, zero device>
 hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Mar 21 2010 06:13:51)
 ACPI: RSDP @ 0x0xe0010/0x0014 (v  0 COMPAQ)
 ACPI: RSDT @ 0x0xe0080/0x0030 (v  1 COMPAQ CPQB0B6  0x19990822      0x00000000)
 ACPI: FACP @ 0x0xe00cc/0x0074 (v  1 COMPAQ CONTACT  0x00000001      0x00000000)
 ACPI: DSDT @ 0x0xe0140/0x0933 (v  1 COMPAQ     DSDT 0x00000001 MSFT 0x0100000B)
 ACPI: FACS @ 0x0xe0040/0x0040
 ACPI: SSDT @ 0x0xe0a73/0x0F1C (v  1 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000B)
 ACPI: SSDT @ 0x0xe198f/0x071E (v  1 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000B)
 npx0: INT 16 interface
 acpi0: <COMPAQ CPQB0B6> on motherboard
 acpi0: [MPSAFE]
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 acpi0: wakeup code va 0xc1b5d000 pa 0x1000
 pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000058
 pci_open(1a):   mode1res=0x80000000 (0x80000000)
 pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=71908086)
 pcibios: BIOS version 2.10
 acpi_bus_number: root bus has no _BBN, assuming 0
 AcpiOsDerivePciId: \\_SB_.PCI0.IBRG.PIRQ -> bus 0 dev 20 func 0
 acpi: bad write to port 0x070 (8), val 0x31
 acpi: bad read from port 0x071 (8)
 acpi: bad write to port 0x070 (8), val 0x30
 acpi: bad read from port 0x071 (8)
 acpi: bad write to port 0x070 (8), val 0x31
 acpi: bad read from port 0x071 (8)
 acpi: bad write to port 0x070 (8), val 0x30
 acpi: bad read from port 0x071 (8)
 acpi0: reservation of 0, a0000 (3) failed
 acpi0: reservation of 100000, 7f00000 (3) failed
 ACPI timer: 0/4 0/5 0/16777185 0/4 0/16777214 0/4 0/5 0/16777201 0/4 0/5 -> 0
 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
 pci_link0:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  3 4 5 6 7 10 11
   Validation          0  255   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pci_link1:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  3 4 5 6 7 10 11
   Validation          0  255   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pci_link2:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0    9   N     0  3 4 5 6 7 10 11
   Validation          0    9   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pci_link3:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  3 4 5 6 7 10 11
   Validation          0   11   N     0  3 4 5 6 7 10 11
   After Disable       0  255   N     0  3 4 5 6 7 10 11
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 ACPI: Found matching pin for 0.16.INTA at func 0: 11
 ACPI: Found matching pin for 0.20.INTD at func 2: 11
 pci0: <ACPI PCI bus> on pcib0
 pci0: domain=0, physical bus=0
 found-> vendor=0x8086, dev=0x7190, revid=0x03
         domain=0, bus=0, slot=0, func=0
         class=06-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[10]: type Prefetchable Memory, range 32, base 0x44000000, size 26, enabled
 found-> vendor=0x8086, dev=0x7191, revid=0x03
         domain=0, bus=0, slot=1, func=0
         class=06-04-00, hdrtype=0x01, mfdev=0
         cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
 found-> vendor=0x8086, dev=0x1229, revid=0x08
         domain=0, bus=0, slot=16, func=0
         class=02-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
         lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
         intpin=a, irq=11
         powerspec 2  supports D0 D1 D2 D3  current D0
         map[10]: type Memory, range 32, base 0x48200000, size 12, enabled
         map[14]: type I/O Port, range 32, base 0x1400, size  6, enabled
         map[18]: type Memory, range 32, base 0x48100000, size 20, enabled
 pcib0: matched entry for 0.16.INTA (src \\_SB_.LNKD:0)
 pcib0: slot 16 INTA routed to irq 11 via \\_SB_.LNKD
 found-> vendor=0x8086, dev=0x7110, revid=0x02
         domain=0, bus=0, slot=20, func=0
         class=06-01-00, hdrtype=0x00, mfdev=1
         cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found-> vendor=0x8086, dev=0x7111, revid=0x01
         domain=0, bus=0, slot=20, func=1
         class=01-01-80, hdrtype=0x00, mfdev=0
         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[20]: type I/O Port, range 32, base 0x1460, size  4, enabled
 found-> vendor=0x8086, dev=0x7112, revid=0x01
         domain=0, bus=0, slot=20, func=2
         class=0c-03-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=d, irq=11
         map[20]: type I/O Port, range 32, base 0x1440, size  5, enabled
 pcib0: matched entry for 0.20.INTD (src \\_SB_.LNKD:0)
 pcib0: slot 20 INTD routed to irq 11 via \\_SB_.LNKD
 found-> vendor=0x8086, dev=0x7113, revid=0x02
         domain=0, bus=0, slot=20, func=3
         class=06-80-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[90]: type I/O Port, range 32, base 0xfc00, size  4, enabled
 agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
 hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0x44000000
 agp0: allocating GATT for aperture of size 64M
 pcib1: <PCI-PCI bridge> at device 1.0 on pci0
 pcib1:   domain            0
 pcib1:   secondary bus     1
 pcib1:   subordinate bus   1
 pcib1:   I/O decode        0xf000-0xfff
 pcib1:   memory decode     0x40000000-0x40ffffff
 pcib1:   prefetched decode 0x42000000-0x43ffffff
 pci1: <PCI bus> on pcib1
 pci1: domain=0, physical bus=1
 found-> vendor=0x10de, dev=0x002c, revid=0x15
         domain=0, bus=1, slot=0, func=0
         class=03-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
         intpin=a, irq=9
         powerspec 1  supports D0 D3  current D0
         map[10]: type Memory, range 32, base 0x40000000, size 24, enabled
 pcib1: requested memory range 0x40000000-0x40ffffff: good
         map[14]: type Prefetchable Memory, range 32, base 0x42000000, size 25, enabled
 pcib1: requested memory range 0x42000000-0x43ffffff: good
 pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKC:0)
 pcib0: slot 1 INTA routed to irq 9 via \\_SB_.LNKC
 pcib1: slot 0 INTA is routed to irq 9
 vgapci0: <VGA-compatible display> mem 0x40000000-0x40ffffff,0x42000000-0x43ffffff irq 9 at device 0.0 on pci1
 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1400-0x143f mem 0x48200000-0x48200fff,0x48100000-0x481fffff irq 11 at device 16.0 on pci0
 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x48200000
 fxp0: using memory space register mapping
 fxp0: PCI IDs: 8086 1229 8086 000b 0008
 fxp0: Dynamic Standby mode is disabled
 miibus0: <MII bus> on fxp0
 inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
 inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 fxp0: bpf attached
 fxp0: Ethernet address: 00:07:e9:1a:d1:f8
 fxp0: [MPSAFE]
 fxp0: [ITHREAD]
 isab0: <PCI-ISA bridge> at device 20.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1460-0x146f at device 20.1 on pci0
 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1460
 ata0: <ATA channel 0> on atapci0
 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
 ata0: reset tp1 mask=03 ostat0=50 ostat1=00
 ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
 ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
 ata0: [MPSAFE]
 ata0: [ITHREAD]
 ata1: <ATA channel 1> on atapci0
 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
 ata1: reset tp1 mask=03 ostat0=00 ostat1=00
 ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
 ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
 ata1: reset tp2 stat0=00 stat1=00 devices=0x0
 ata1: [MPSAFE]
 ata1: [ITHREAD]
 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1440-0x145f irq 11 at device 20.2 on pci0
 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1440
 uhci0: [GIANT-LOCKED]
 uhci0: [ITHREAD]
 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
 usb0: USB revision 1.0
 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 uhub0: 2 ports with 2 removable, self powered
 pci0: <bridge> at device 20.3 (no driver attached)
 acpi_button0: <Power Button> on acpi0
 speaker0: <PC speaker> port 0x61 on acpi0
 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 atkbd: the current kbd controller command byte 0047
 atkbd: keyboard ID 0x41ab (2)
 kbd0 at atkbd0
 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
 atkbd0: [GIANT-LOCKED]
 atkbd0: [ITHREAD]
 psm0: current command byte:0047
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: [ITHREAD]
 psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons
 psm0: config:00000000, flags:00000008, packet size:4
 psm0: syncmask:08, syncbits:00
 sio0: irq maps: 0x1 0x11 0x1 0x1
 sio0: irq maps: 0x1 0x11 0x1 0x1
 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 sio0: type 16550A
 sio0: [FILTER]
 sio1: irq maps: 0x1 0x9 0x1 0x1
 sio1: irq maps: 0x1 0x9 0x1 0x1
 sio1: <Standard PC COM port> port 0x2f8-0x2ff irq 3 on acpi0
 sio1: type 16550A
 sio1: [FILTER]
 fdc0: <floppy drive controller> port 0x3f2-0x3f7,0 irq 6 drq 2 on acpi0
 fdc0: No FDOUT register!
 device_attach: fdc0 attach returned 6
 cpu0: <ACPI CPU> on acpi0
 cpu0: switching to generic Cx mode
 acpi_throttle0: <ACPI CPU Throttling> on cpu0
 acpi_throttle0: P_CNT from P_BLK 0xf810
 fdc0: <floppy drive controller> port 0x3f2-0x3f7,0 irq 6 drq 2 on acpi0
 fdc0: No FDOUT register!
 device_attach: fdc0 attach returned 6
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 ex_isa_identify()
 ata: ata0 already exists; skipping it
 ata: ata1 already exists; skipping it
 atkbdc: atkbdc0 already exists; skipping it
 fdc: fdc0 already exists; skipping it
 sio: sio0 already exists; skipping it
 sio: sio1 already exists; skipping it
 pnp_identify: Trying Read_Port at 203
 pnp_identify: Trying Read_Port at 243
 pnp_identify: Trying Read_Port at 283
 pnp_identify: Trying Read_Port at 2c3
 pnp_identify: Trying Read_Port at 303
 pnp_identify: Trying Read_Port at 343
 pnp_identify: Trying Read_Port at 383
 pnp_identify: Trying Read_Port at 3c3
 PNP Identify complete
 sc: sc0 already exists; skipping it
 vga: vga0 already exists; skipping it
 isa_probe_children: disabling PnP devices
 isa_probe_children: probing non-PnP devices
 pmtimer0 on isa0
 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xe7fff pnpid ORM0000 on isa0
 adv0: not probed (disabled)
 aha0: not probed (disabled)
 aic0: not probed (disabled)
 bt0: not probed (disabled)
 cs0: not probed (disabled)
 ed0: not probed (disabled)
 fe0: not probed (disabled)
 ie0: not probed (disabled)
 le0: not probed (disabled)
 ppc0: parallel port found at 0x378
 ppc0: using extended I/O port range
 ppc0: ECP SPP ECP+EPP SPP
 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
 ppc0: FIFO with 16/16/8 bytes threshold
 ppbus0: <Parallel port bus> on ppc0
 ppbus0: [MPSAFE]
 ppbus0: [ITHREAD]
 plip0: <PLIP network interface> on ppbus0
 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
 plip0: bpf attached
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 ppc0: [GIANT-LOCKED]
 ppc0: [ITHREAD]
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
 sio2: not probed (disabled)
 sio3: not probed (disabled)
 sn0: not probed (disabled)
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 vt0: not probed (disabled)
 isa_probe_children: probing PnP devices
 umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.41, addr 2> on uhub0
 umass0:0:0:-1: Attached to scbus0
 Device configuration finished.
 procfs registered
 Timecounter "TSC" frequency 398271524 Hz quality 800
 Timecounters tick every 1.000 msec
 vlan: initialized, using hash tables with chaining
 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
 lo0: bpf attached
 hptrr: no controller detected.
 ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
 ad0: setting PIO4 on PIIX4 chip
 ad0: setting UDMA33 on PIIX4 chip
 ad0: 19092MB <Seagate ST320011A 3.21> at ata0-master UDMA33
 ad0: 39102336 sectors [41378C/15H/63S] 16 sectors/interrupt 1 depth queue
 GEOM: new disk ad0
 ad0: Intel check1 failed
 ad0: Adaptec check1 failed
 ad0: LSI (v3) check1 failed
 ad0: LSI (v2) check1 failed
 ad0: FreeBSD check1 failed
 acd0: setting PIO4 on PIIX4 chip
 acd0: setting UDMA33 on PIIX4 chip
 acd0: <PIONEER DVD-RW DVR-110D/1.17> DVDR drive at ata0 as slave
 acd0: read 6890KB/s (6890KB/s) write 5511KB/s (6890KB/s), 2000KB buffer, UDMA33
 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
 acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
 acd0: Audio: play, 256 volume levels
 acd0: Mechanism: ejectable tray, unlocked
 acd0: Medium: no/blank disc
 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
 (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
 (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
 (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
 (probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
 (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
 (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
 Retrying Command (per Sense Data)
 (probe0:umass-sim0:0:0:0): Retrying Command
 GEOM: new disk da0
 pass0 at umass-sim0 bus 0 target 0 lun 0
 pass0: <JetFlash TS4GJF185 8.07> Removable Direct Access SCSI-2 device 
 pass0: 1.000MB/s transfers
 ATA PseudoRAID loaded
 da0 at umass-sim0 bus 0 target 0 lun 0
 da0: <JetFlash TS4GJF185 8.07> Removable Direct Access SCSI-2 device 
 da0: 1.000MB/s transfers
 da0: 3911MB (8011774 512 byte sectors: 255H 63S/T 498C)
 Trying to mount root from ufs:/dev/ad0s2a
 start_init: trying /sbin/init
 tun0: bpf attached
 WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
 ====================================================================
 
 =========== pciconf-lcbv.slot4 =====================================
 hostb0@pci0:0:0:0:      class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
     class      = bridge
     subclass   = HOST-PCI
     bar   [10] = type Prefetchable Memory, range 32, base 0x44000000, size 67108864, enabled
     cap 02[a0] = AGP 2x 1x SBA disabled
 pcib1@pci0:0:1:0:       class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
     vendor     = 'Intel Corporation'
     device     = '440BX/ZX AGPset PCI-to-PCI bridge (82443BX/ZX)'
     class      = bridge
     subclass   = PCI-PCI
 fxp0@pci0:0:16:0:       class=0x020000 card=0x000b8086 chip=0x12298086 rev=0x08 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
     class      = network
     subclass   = ethernet
     bar   [10] = type Memory, range 32, base 0x48200000, size 4096, enabled
     bar   [14] = type I/O Port, range 32, base 0x1400, size 64, enabled
     bar   [18] = type Memory, range 32, base 0x48100000, size 1048576, enabled
     cap 01[dc] = powerspec 2  supports D0 D1 D2 D3  current D0
 isab0@pci0:0:20:0:      class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M ISBridgeA  (82371AB/EB/MB)'
     class      = bridge
     subclass   = PCI-ISA
 atapci0@pci0:0:20:1:    class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M IDE Controller (82371AB/EB/MB)'
     class      = mass storage
     subclass   = ATA
     bar   [20] = type I/O Port, range 32, base 0x1460, size 16, enabled
 uhci0@pci0:0:20:2:      class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M USB Interface (82371AB/EB/MB)'
     class      = serial bus
     subclass   = USB
     bar   [20] = type I/O Port, range 32, base 0x1440, size 32, enabled
 none0@pci0:0:20:3:      class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PIIX4/4E/4M Power Management Controller (82371AB/EB/MB)'
     class      = bridge
 vgapci0@pci0:1:0:0:     class=0x030000 card=0x00000000 chip=0x002c10de rev=0x15 hdr=0x00
     vendor     = 'Nvidia Corp'
     device     = 'VANTA / VANTA LT [NVVANTA]'
     class      = display
     subclass   = VGA
     bar   [10] = type Memory, range 32, base 0x40000000, size 16777216, enabled
     bar   [14] = type Prefetchable Memory, range 32, base 0x42000000, size 33554432, enabled
     cap 01[60] = powerspec 1  supports D0 D3  current D0
     cap 02[44] = AGP 4x 2x 1x disabled
 ====================================================================
 
 -- 
 Best regards,
  kvas                            mailto:kvas@bf.pstu.ac.ru
 

From: Pyun YongHyeon <pyunyh@gmail.com>
To: kvas <kvas@bf.pstu.ac.ru>
Cc: yongari@FreeBSD.org, bug-followup@FreeBSD.org
Subject: Re: kern/146788: [fxp] [patch] New PCI devID for if_fxp driver (tested, worked)
Date: Thu, 27 May 2010 11:42:11 -0700

 On Wed, May 26, 2010 at 11:45:28AM +0600, kvas wrote:
 > Hello Pyun,
 > 
 > Tuesday, May 25, 2010, 10:41:55 PM, you wrote:
 > 
 > 
 > PY> [...]
 > 
 > >> So strange it looks for me too. But i am sure that
 > >> 
 > >> 1) without this patch the GENERIC kernels from 7.0-Release and
 > >> 7.3-Release was not able to detect my netcard as a netcard, only as an
 > >> unknown device
 > >> 
 > 
 > PY> Hmm, none of your device has 0x1201 id. I have no idea how this can
 > PY> happen. And the second question is where did you know device id
 > PY> 0x1201 is your controller's id?
 > PY> The only wild guess I can think of is ACPI related thing or
 > PY> half-inserted NIC controller. Please check whether your controller
 > PY> is firmly inserted into your box.
 > 
 > >> 2) after adding the patch to the 7.3-Release GENERIC kernel i have
 > >> sucessfully worked thru this netcard with my Internet provider for
 > >> some hours
 > >> 
 > >> 3) of cause in such situation better to recheck, and this evening at
 > >> home i shall boot the comp with original GENERIC and modified GENERIC
 > >> kernels, and take output from verbose dmesg and pciconf -lcbv in both
 > >> variants. Then i shall follow-up it to PR.
 > >> 
 > 
 > PY> Ok, please check it again. Also the patch you posted couldn't be
 > PY> applied to 7.3-RELEASE because I changed "struct fxp_ident"
 > PY> structure. So I wonder how you successfully built a kernel on
 > PY> 7.3-RELEASE with the patch.
 > 
 > I have tested situation with this netcard some more. In the 1-st, 2-nd
 > and 4-th PCI slots of motherboard (Compaq Deskpro EP/SB series) it
 > detects as "chip=0x12298086 rev=0x08" which values are recognized fine
 > with fxp driver without my patch. But in the 3-rd PCI slot the netcard
 > identification for FreeBSD (7.3-Release GENERIC) may be differ.
 > Yesterday evening it was detected "chip=0x12280086 rev=0x08" and
 > 19/05/2010 values was "vendor=0x8086, dev=0x1201, revid=0x08".
 > 
 > I am unsure about the reasons of this strange behaviour. The insertion
 > of netcard was really firm enough. This motherboard is known partially
 > faulty, at least its floppy drive controller. May be hardware problems
 > includes not only FDC, but a PCI-slot3 too. Or the reason may be in
 > ACPI and design of the motherboard. Motherboards PCI-slot3 shares its
 > IRQ with AGP-slot (AGP contains Nvidia Vanta controller), can it be
 > the reason? And in PCI-slot4 which IRQ shared with onboards USB
 
 I think it's not related with interrupt sharing.
 
 > controller the netcard detects and works fine. Now i have settled
 > netcard in PCI-slot2 and plan to leave it here for long time.
 > 
 > Thank you for the attention to my problem and giving me impulse to
 > continue investigation. If you have an interest, below i include files
 > of verbose dmesg and "pciconf -lcbv" results for netcard placed in all
 > four slots. The output of "pciconf -lcbv" for slots 1,2,4 have equal
 > file length, and for slot3 the file length differs.
 > 
 > =========== dmesg.boot_19-05-2010.slot3 (fragment) =================
 > found-> vendor=0x8086, dev=0x1201, revid=0x08
 >         domain=0, bus=0, slot=14, func=0
 >         class=02-00-00, hdrtype=0x00, mfdev=0
 >         cmdreg=0x0004, statreg=0x8290, cachelnsz=8 (dwords)
 >         lattimer=0x42 (1980 ns), mingnt=0x00 (0 ns), maxlat=0x38 (14000 ns)
 >         intpin=a, irq=255
 >         powerspec 2  supports D0 D1 D2 D3  current D0
 >         map[10]: type Memory, range 32, base 0, size 12, memory disabled
 >         map[14]: type I/O Port, range 32, base 0, size  6, port disabled
 >         map[18]: type Memory, range 32, base 0, size 20, memory disabled
 > ====================================================================
 > 
 
 Thanks for the deep investigation. Looking at the id pattern
 changes indicate one or two bit were erroneously flipped when
 the controller sits on 3rd PCI slot.
 device id 0x1229 -> 0x1201 : Two bits change
 vendor 0x8086 -> 0x0086 : 1 bit change
 startreg 0x0290 -> 0x8290 : 1 bit change
 So I guess it was caused by faulty motherboard.
 May I close this PR?
State-Changed-From-To: feedback->closed 
State-Changed-By: yongari 
State-Changed-When: Fri May 28 16:39:23 UTC 2010 
State-Changed-Why:  
Close. Submitter confirms the reported device id was generated by 
faulty motherboard. Stock fxp(4) has no problems to idenify the 
controller when it sits on other PCI slot. 

http://www.freebsd.org/cgi/query-pr.cgi?pr=146788 
>Unformatted:
