From hohmuth@irs201.inf.tu-dresden.de  Wed Jul 31 09:10:18 1996
Received: from irs201.inf.tu-dresden.de (irs201.inf.tu-dresden.de [141.76.16.201])
          by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id JAA08417
          for <FreeBSD-gnats-submit@freebsd.org>; Wed, 31 Jul 1996 09:10:13 -0700 (PDT)
Received: (from hohmuth@localhost) by irs201.inf.tu-dresden.de (8.7.5/8.6.9) id SAA12022; Wed, 31 Jul 1996 18:10:46 +0200 (MET DST)
Message-Id: <199607311610.SAA12022@irs201.inf.tu-dresden.de>
Date: Wed, 31 Jul 1996 18:10:46 +0200 (MET DST)
From: hohmuth@inf.tu-dresden.de (Michael Hohmuth)
Reply-To: hohmuth@inf.tu-dresden.de (Michael Hohmuth)
To: FreeBSD-gnats-submit@freebsd.org
Subject: visual UserConfig doesn't work with pcvt console
X-Send-Pr-Version: 3.2

>Number:         1450
>Category:       kern
>Synopsis:       visual UserConfig doesn't work with pcvt console
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    joerg
>State:          closed
>Quarter:
>Keywords:
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Wed Jul 31 09:20:01 PDT 1996
>Closed-Date:    Sun Aug 11 00:18:50 MET DST 1996
>Last-Modified:  Sun Aug 11 00:19:59 MET DST 1996
>Originator:     Michael Hohmuth
>Release:        FreeBSD 2.1.5-RELEASE i386
>Organization:
Dept. of Computer Science, TU Dresden, Germany
>Environment:
"uname -a" yields:

    FreeBSD olymp.inf.tu-dresden.de 2.1.5-RELEASE FreeBSD 2.1.5-RELEASE #0: Sat Jul 27 03:11:06 MET DST 1996     root@olymp.inf.tu-dresden.de:/usr/src/sys/compile/OLYMP  i386

Here's my kernel config file:

machine		"i386"
#cpu		"I386_CPU"
cpu		"I486_CPU"
#cpu		"I586_CPU"
ident		OLYMP
maxusers	10

#options		DIAGNOSTIC		# turn on various sanity checks
options		KTRACE			#kernel tracing
options		BROKEN_KEYBOARD_RESET

#options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		NFS			#Network Filesystem
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3
options		"SCSI_DELAY=15"		#Be pessimistic about Joe SCSI device
#options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
options		UCONSOLE		#Allow users to grab the console

options		SYSVSHM
options		SYSVSEM
options		SYSVMSG

config		kernel	root on wd0 

controller	isa0
#controller	eisa0
controller	pci0

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0
disk		fd1	at fdc0 drive 1
tape		ft0	at fdc0 drive 2

controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

#controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk		wd2	at wdc1 drive 0
#disk		wd3	at wdc1 drive 1

#options	ATAPI	#Enable ATAPI support for IDE bus
#device		wcd0	#IDE CD-ROM

controller	ncr0
#controller	ahc0

#controller	bt0	at isa? port "IO_BT0" bio irq ? vector btintr
#controller	uha0	at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
#controller	ahc1	at isa? bio irq ? vector ahcintr
#controller	ahb0	at isa? bio irq ? vector ahbintr
#controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
#controller	aic0    at isa? port 0x340 bio irq 11 vector aicintr
#controller	nca0	at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller	nca1	at isa? port 0x350 bio irq 5 vector ncaintr
#controller	sea0	at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr

controller	scbus0

device		sd0

device		st0

device		cd0	#Only need one of these, the code dynamically grows

#device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr
#device		mcd1	at isa? port 0x340 bio irq 11 vector mcdintr

#controller	matcd0	at isa? port ? bio

#device		scd0	at isa? port 0x230 bio

# syscons is the default console driver, resembling an SCO console
#device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
device		vt0	at isa? port "IO_KBD" tty irq 1 vector pcrint
options		"PCVT_FREEBSD=210"	# pcvt running on FreeBSD 2.1
options		XSERVER			# include code for XFree86

# Mandatory, don't remove
device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr

device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
#device		sio2	at isa? port "IO_COM3" tty irq 5 vector siointr
#device		sio3	at isa? port "IO_COM4" tty irq 9 vector siointr

device		lpt0	at isa? port? tty irq 7 vector lptintr
#device		lpt1	at isa? port? tty
#device		lpt2	at isa? port? tty

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
device ed0 at isa? port 0x280 net irq  5 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq  5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq  7 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr

pseudo-device	loop
pseudo-device	ether
pseudo-device	log
pseudo-device	sl	1
# ijppp uses tun instead of ppp device
#pseudo-device	ppp	1
pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	bpfilter	4	#Berkeley packet filter
pseudo-device	gzip		# Exec gzipped a.out's
pseudo-device	vn		# Vnode driver (turns a file into a device)

>Description:
When using the PCVT console driver, in visual UserConfig, the cursor
keys don't work.

The other keys (Tab, "q" etc.) still work OK.

>How-To-Repeat:
Configure a kernel to use the PCVT console driver.

Boot the kernel with "-c".

Type "visual".

Try using the arrow keys.

>Fix:
Use the dumb console UserConfig, or don't use the PCVT console driver


>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->closed 
State-Changed-By: joerg 
State-Changed-When: Sun Aug 11 00:18:50 MET DST 1996 
State-Changed-Why:  
All currently open pcvt PRs have been resolved in the following  
files and respective revisions:  

pcvt_conf.h 1.5  
pcvt_drv.c 1.22  
pcvt_hdr.h 1.18  
pcvt_kbd.c 1.11  

(in combination with userconfig.c rev 1.43, regarding the visual  
UserConfig).  



Responsible-Changed-From-To: freebsd-bugs->joerg 
Responsible-Changed-By: joerg 
Responsible-Changed-When: Sun Aug 11 00:18:50 MET DST 1996 
Responsible-Changed-Why:  
I'm dealing with pcvt in FreeBSD. 
>Unformatted:
 
