From vermaden@interia.pl  Mon Sep 21 06:47:38 2009
Return-Path: <vermaden@interia.pl>
Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34])
	by hub.freebsd.org (Postfix) with ESMTP id 107C2106568B
	for <bug-followup@FreeBSD.org>; Mon, 21 Sep 2009 06:47:38 +0000 (UTC)
	(envelope-from vermaden@interia.pl)
Received: from smtp240.poczta.interia.pl (smtp240.poczta.interia.pl [217.74.64.240])
	by mx1.freebsd.org (Postfix) with ESMTP id 517D08FC24
	for <bug-followup@FreeBSD.org>; Mon, 21 Sep 2009 06:47:37 +0000 (UTC)
Received: by smtp240.poczta.interia.pl (INTERIA.PL, from userid 502)
	id E94201EF22F; Mon, 21 Sep 2009 08:17:17 +0200 (CEST)
Received: from f34.poczta.interia.pl (f34.poczta.interia.pl [10.217.2.34])
	by smtp240.poczta.interia.pl (INTERIA.PL) with ESMTP id 8E9C41EF1B4
	for <bug-followup@FreeBSD.org>; Mon, 21 Sep 2009 08:17:17 +0200 (CEST)
Received: from localhost (localhost [127.0.0.1])
	by f34.poczta.interia.pl (Postfix) with ESMTP id 60AEA9F34AF
	for <bug-followup@FreeBSD.org>; Mon, 21 Sep 2009 08:17:16 +0200 (CEST)
Message-Id: <20090921061717.60AEA9F34AF@f34.poczta.interia.pl>
Date: 21 Sep 2009 08:17:16 +0200
From: vermaden <vermaden@interia.pl>
To: bug-followup@FreeBSD.org
Subject: =?UTF-8?q?re:_kern/138739:_[wpi]_wpi(4)_does_not_work_very_well_under_8.0-beta4?=

>Number:         139007
>Category:       kern
>Synopsis:       Re: kern/138739: [wpi] wpi(4) does not work very well under 8.0-beta4
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Mon Sep 21 06:50:00 UTC 2009
>Closed-Date:    Mon Sep 21 07:18:08 UTC 2009
>Last-Modified:  Mon Sep 21 07:18:08 UTC 2009
>Originator:     
>Release:        
>Organization:
>Environment:
>Description:
 I have added dmesg(8) output below after some time of working
 connection (freebsd-update upgrade -r 8.0-RC1 ended succesfully).
 
 root# dmesg=20
 Copyright (c) 1992-2009 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 8.0-BETA4 #0: Sun Sep  6 05:51:03 UTC 2009
     root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 WARNING: WITNESS option enabled, expect reduced performance.
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz (1994.44-MHz 686-class=
  CPU)
   Origin =3D "GenuineIntel"  Id =3D 0x6fa  Stepping =3D 10
   Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
 E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=3D0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDC=
 M>
   AMD Features=3D0x20100000<NX,LM>
   AMD Features2=3D0x1<LAHF>
   TSC: P-state invariant
 real memory  =3D 2147483648 (2048 MB)
 avail memory =3D 2076880896 (1980 MB)
 ACPI APIC Table: <DELL   M08    >
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 FreeBSD/SMP: 1 package(s) x 2 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
 ioapic0: Changing APIC ID to 2
 ioapic0 <Version 2.0> irqs 0-23 on motherboard
 kbd1 at kbdmux0
 acpi0: <DELL M08    > on motherboard
 acpi0: [ITHREAD]
 ACPI Warning: Incorrect checksum in table [TCPA] - 33, should be D7 2009052=
 1 tbutils-275
 Timecounter "HPET" frequency 14318180 Hz quality 900
 acpi0: reservation of 0, 9f000 (3) failed
 acpi0: reservation of 100000, 7f55a800 (3) failed
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 vgapci0: <VGA-compatible display> port 0xeff8-0xefff mem 0xf6e00000-0xf6eff=
 fff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
 agp0: <Intel GM965 SVGA controller> on vgapci0
 agp0: detected 7676k stolen memory
 agp0: aperture size is 256M
 vgapci1: <VGA-compatible display> mem 0xf6f00000-0xf6ffffff at device 2.1 o=
 n pci0
 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20=
  at device 26.0 on pci0
 uhci0: [ITHREAD]
 uhci0: LegSup =3D 0x0f00
 usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
 uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21=
  at device 26.1 on pci0
 uhci1: [ITHREAD]
 uhci1: LegSup =3D 0x0f00
 usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
 ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed=
 1c7ff irq 22 at device 26.7 on pci0
 ehci0: [ITHREAD]
 usbus2: EHCI version 1.0
 usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
 pci0: <multimedia, HDA> at device 27.0 (no driver attached)
 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
 pci11: <ACPI PCI bus> on pcib1
 pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
 pci12: <ACPI PCI bus> on pcib2
 wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xf6cff000-0xf6cfffff irq 17 at d=
 evice 0.0 on pci12
 wpi0: Driver Revision 20071127
 wpi0: Hardware Revision (0x1)
 adding chan 1 (2412MHz) flags=3D0x2b maxpwr=3D15 passive=3D0, offset 2
 adding chan 2 (2417MHz) flags=3D0x2b maxpwr=3D15 passive=3D0, offset 4
 adding chan 3 (2422MHz) flags=3D0x2b maxpwr=3D15 passive=3D0, offset 6
 adding chan 4 (2427MHz) flags=3D0x2b maxpwr=3D15 passive=3D0, offset 8
 adding chan 5 (2432MHz) flags=3D0x2b maxpwr=3D15 passive=3D0, offset 10
 adding chan 6 (2437MHz) flags=3D0x2b maxpwr=3D15 passive=3D0, offset 12
 adding chan 7 (2442MHz) flags=3D0x2b maxpwr=3D15 passive=3D0, offset 14
 adding chan 8 (2447MHz) flags=3D0x2b maxpwr=3D15 passive=3D0, offset 16
 adding chan 9 (2452MHz) flags=3D0x2b maxpwr=3D15 passive=3D0, offset 18
 adding chan 10 (2457MHz) flags=3D0x2b maxpwr=3D15 passive=3D0, offset 20
 adding chan 11 (2462MHz) flags=3D0x2b maxpwr=3D14 passive=3D0, offset 22
 adding chan 36 (5180MHz) flags=3D0xa1 maxpwr=3D14 passive=3D1, offset 23
 adding chan 40 (5200MHz) flags=3D0xa1 maxpwr=3D14 passive=3D1, offset 24
 adding chan 44 (5220MHz) flags=3D0xa1 maxpwr=3D14 passive=3D1, offset 25
 adding chan 48 (5240MHz) flags=3D0xa1 maxpwr=3D14 passive=3D1, offset 26
 adding chan 52 (5260MHz) flags=3D0xb1 maxpwr=3D14 passive=3D1, offset 27
 adding chan 56 (5280MHz) flags=3D0xb1 maxpwr=3D14 passive=3D1, offset 28
 adding chan 60 (5300MHz) flags=3D0xb1 maxpwr=3D14 passive=3D1, offset 29
 adding chan 64 (5320MHz) flags=3D0xb1 maxpwr=3D14 passive=3D1, offset 30
 adding chan 149 (5745MHz) flags=3D0x21 maxpwr=3D16 passive=3D1, offset 31
 adding chan 153 (5765MHz) flags=3D0x21 maxpwr=3D16 passive=3D1, offset 32
 adding chan 157 (5785MHz) flags=3D0x21 maxpwr=3D16 passive=3D1, offset 33
 adding chan 161 (5805MHz) flags=3D0x21 maxpwr=3D16 passive=3D1, offset 34
 adding chan 165 (5825MHz) flags=3D0x21 maxpwr=3D16 passive=3D1, offset 35
 power group 0: chan=3D1 maxpwr=3D48 temp=3D-184
         sample 0: index=3D13 power=3D45
         sample 1: index=3D29 power=3D34
         sample 2: index=3D47 power=3D15
         sample 3: index=3D58 power=3D5
         sample 4: index=3D77 power=3D-14
 power group 1: chan=3D44 maxpwr=3D58 temp=3D-187
         sample 0: index=3D12 power=3D52
         sample 1: index=3D19 power=3D44
         sample 2: index=3D32 power=3D31
         sample 3: index=3D43 power=3D21
         sample 4: index=3D77 power=3D-12
 power group 2: chan=3D64 maxpwr=3D60 temp=3D-185
         sample 0: index=3D12 power=3D54
         sample 1: index=3D20 power=3D47
         sample 2: index=3D33 power=3D35
         sample 3: index=3D44 power=3D25
         sample 4: index=3D77 power=3D-6
 power group 3: chan=3D116 maxpwr=3D54 temp=3D-184
         sample 0: index=3D12 power=3D45
         sample 1: index=3D20 power=3D37
         sample 2: index=3D36 power=3D21
         sample 3: index=3D48 power=3D11
         sample 4: index=3D77 power=3D-16
 power group 4: chan=3D153 maxpwr=3D52 temp=3D-183
         sample 0: index=3D10 power=3D42
         sample 1: index=3D20 power=3D31
         sample 2: index=3D32 power=3D19
         sample 3: index=3D42 power=3D12
         sample 4: index=3D77 power=3D-20
 wpi0: Regulatory Domain: MoW1
 wpi0: Hardware Type: B
 wpi0: Hardware Revision: ?
 wpi0: SKU does support 802.11a
 wpi0: [ITHREAD]
 pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0
 pci9: <ACPI PCI bus> on pcib3
 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0xa002> me=
 m 0xf6bf0000-0xf6bfffff irq 17 at device 0.0 on pci9
 miibus0: <MII bus> on bge0
 brgphy0: <BCM5755 10/100/1000baseTX PHY> PHY 1 on miibus0
 brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000ba=
 seT-FDX, auto
 bge0: Ethernet address: 00:1c:23:xx:xx:xx
 bge0: [ITHREAD]
 uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20=
  at device 29.0 on pci0
 uhci2: [ITHREAD]
 uhci2: LegSup =3D 0x0f00
 usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
 uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21=
  at device 29.1 on pci0
 uhci3: [ITHREAD]
 uhci3: LegSup =3D 0x0f00
 usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
 uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22=
  at device 29.2 on pci0
 uhci4: [ITHREAD]
 uhci4: LegSup =3D 0x0f00
 usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
 ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed=
 1c3ff irq 20 at device 29.7 on pci0
 ehci1: [ITHREAD]
 usbus6: EHCI version 1.0
 usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 pci3: <ACPI PCI bus> on pcib4
 cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
 cardbus0: <CardBus bus> on cbb0
 pccard0: <16-bit PCCard bus> on cbb0
 cbb0: [FILTER]
 fwohci0: <1394 Open Host Controller Interface> mem 0xf6aff000-0xf6afffff,0x=
 f6afe800-0xf6afefff irq 19 at device 1.4 on pci3
 fwohci0: [ITHREAD]
 fwohci0: OHCI version 1.10 (ROM=3D0)
 fwohci0: No. of Isochronous channels is 8.
 fwohci0: EUI64 47:4f:c0:00:01:xx:xx:xx
 fwohci0: Phy 1394a available S400, 1 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 firewire0: <IEEE1394(FireWire) bus> on fwohci0
 dcons_crom0: <dcons configuration ROM> on firewire0
 dcons_crom0: bus_addr 0x17c8000
 fwe0: <Ethernet over FireWire> on firewire0
 if_fwe0: Fake Ethernet address: 46:4f:c0:xx:xx:xx
 fwe0: Ethernet address: 46:4f:c0:xx:xx:xx
 fwip0: <IP over FireWire> on firewire0
 fwip0: Firewire address: 47:4f:c0:00:01:63:6d:81 @ 0xfffe00000000, S400, ma=
 xrec 2048
 sbp0: <SBP-2/SCSI over FireWire> on firewire0
 fwohci0: Initiate bus reset
 fwohci0: fwohci_intr_core: BUS reset
 fwohci0: fwohci_intr_core: node_id=3D0x00000000, SelfID Count=3D1, CYCLEMAS=
 TER mode
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x17=
 7,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0
 ata0: <ATA channel 0> on atapci0
 ata0: [ITHREAD]
 atapci1: <Intel ICH8M SATA300 controller> port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,=
 0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eff mem 0xf6dfb800-0xf6dfbfff irq 18 =
 at device 31.2 on pci0
 atapci1: [ITHREAD]
 atapci1: AHCI called from vendor specific driver
 atapci1: AHCI v1.10 controller with 3 3Gbps ports, PM not supported
 ata2: <ATA channel 0> on atapci1
 ata2: [ITHREAD]
 ata3: <ATA channel 2> on atapci1
 ata3: [ITHREAD]
 pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 acpi_lid0: <Control Method Lid Switch> on acpi0
 acpi_button0: <Power Button> on acpi0
 acpi_button1: <Sleep Button> on acpi0
 acpi_acad0: <AC Adapter> on acpi0
 battery0: <ACPI Control Method Battery> on acpi0
 battery1: <ACPI Control Method Battery> on acpi0
 acpi_tz0: <Thermal Zone> on acpi0
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on ac=
 pi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 atkbd0: [ITHREAD]
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: [ITHREAD]
 psm0: model GlidePoint, device ID 0
 atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 uart0: [FILTER]
 cpu0: <ACPI CPU> on acpi0
 est0: <Enhanced SpeedStep Frequency Control> on cpu0
 p4tcc0: <CPU Frequency Thermal Control> on cpu0
 cpu1: <ACPI CPU> on acpi0
 est1: <Enhanced SpeedStep Frequency Control> on cpu1
 p4tcc1: <CPU Frequency Thermal Control> on cpu1
 pmtimer0 on isa0
 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff pnpid ORM0=
 000 on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=3D0x300>
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 ppc0: parallel port not found.
 Timecounters tick every 1.000 msec
 firewire0: 1 nodes, maxhop <=3D 0 cable IRM irm(0)  (me)=20
 firewire0: bus manager 0=20
 usbus0: 12Mbps Full Speed USB v1.0
 usbus1: 12Mbps Full Speed USB v1.0
 usbus2: 480Mbps High Speed USB v2.0
 usbus3: 12Mbps Full Speed USB v1.0
 usbus4: 12Mbps Full Speed USB v1.0
 usbus5: 12Mbps Full Speed USB v1.0
 usbus6: 480Mbps High Speed USB v2.0
 ugen0.1: <Intel> at usbus0
 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
 ugen1.1: <Intel> at usbus1
 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
 ugen2.1: <Intel> at usbus2
 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
 ugen3.1: <Intel> at usbus3
 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
 ugen4.1: <Intel> at usbus4
 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
 ugen5.1: <Intel> at usbus5
 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
 ugen6.1: <Intel> at usbus6
 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
 ad4: 76319MB <Seagate ST980813AS 3.ADC> at ata2-master SATA300
 GEOM: ad4s2: geometry does not match label (255h,63s !=3D 16h,63s).
 uhub0: 2 ports with 2 removable, self powered
 uhub1: 2 ports with 2 removable, self powered
 uhub3: 2 ports with 2 removable, self powered
 uhub4: 2 ports with 2 removable, self powered
 uhub5: 2 ports with 2 removable, self powered
 uhub2: 4 ports with 4 removable, self powered
 uhub6: 6 ports with 6 removable, self powered
 ugen0.2: <Broadcom> at usbus0
 uhub7: <Broadcom BCM2045B2, class 9/0, rev 2.00/1.00, addr 2> on usbus0
 uhub7: 3 ports with 0 removable, bus powered
 ugen5.2: <vendor 0x0b97> at usbus5
 uhub8: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on =
 usbus5
 SMP: AP CPU #1 Launched!
 WARNING: WITNESS option enabled, expect reduced performance.
 Trying to mount root from ufs:/dev/ad4s2a
 ugen0.3: <Broadcom Corp> at usbus0
 uhub8: 4 ports with 3 removable, self powered
 ugen0.4: <Broadcom Corp> at usbus0
 ukbd0: <Broadcom Corp product 0x4502, class 0/0, rev 2.00/1.00, addr 4> on =
 usbus0
 kbd2 at ukbd0
 ugen5.3: <O2> at usbus5
 ugen0.5: <Broadcom Corp> at usbus0
 ums0: <Broadcom Corp product 0x4503, class 0/0, rev 2.00/1.00, addr 5> on u=
 sbus0
 ums0: 3 buttons and [XY] coordinates ID=3D2
 wlan0: Ethernet address: 00:1b:77:xx:xx:xx
 wpi0: timeout resetting Tx ring 1
 wpi0: timeout resetting Tx ring 3
 wpi0: timeout resetting Tx ring 4
 microcode alive notification version 10e02 alive 1
 microcode alive notification version 10e02 alive 1
 wpi_newstate: INIT -> SCAN flags 0x0
 wpi_newstate: SCAN -> AUTH flags 0x0
 config chan 6 flags 8005 cck f ofdm 15
 lock order reversal:
  1st 0xc5ba2014 wpi0_com_lock (wpi0_com_lock) @ /usr/src/sys/modules/wpi/..=
 /../dev/wpi/if_wpi.c:1291
  2nd 0xc5abc808 wpi0 (network driver) @ /usr/src/sys/modules/wpi/../../dev/=
 wpi/if_wpi.c:2068
 KDB: stack backtrace:
 db_trace_self_wrapper(c0c74987,e5d72a40,c08c0f75,c08b1cfb,c0c7785a,...) at =
 db_trace_self_wrapper+0x26
 kdb_backtrace(c08b1cfb,c0c7785a,c592d960,c5929040,e5d72a9c,...) at kdb_back=
 trace+0x29
 _witness_debugger(c0c7785a,c5abc808,c5b04c60,c5929040,c110d9ce,...) at _wit=
 ness_debugger+0x25
 witness_checkorder(c5abc808,9,c110d9ce,814,0,...) at witness_checkorder+0x8=
 39
 _mtx_lock_flags(c5abc808,0,c110d9ce,814,c63e819f,...) at _mtx_lock_flags+0x=
 c4
 wpi_raw_xmit(c63e8000,c60b0b00,e5d72b7a,10,c5f782a4,...) at wpi_raw_xmit+0x=
 6d
 ieee80211_mgmt_output(c63e8000,c60b0b00,b0,e5d72b7a,e5d72b60,...) at ieee80=
 211_mgmt_output+0x21e
 ieee80211_send_mgmt(c63e8000,b0,1,d3,c5ba2014,...) at ieee80211_send_mgmt+0=
 x9b2
 sta_newstate(c5f78000,2,c0,50b,15,...) at sta_newstate+0x2b6
 wpi_newstate(c5f78000,2,c0,654,e5d72ca8,...) at wpi_newstate+0xed
 ieee80211_newstate_cb(c5f78000,1,c0c761f6,51,c5afdb98,...) at ieee80211_new=
 state_cb+0x179
 taskqueue_run(c5afdb80,c5afdb98,0,c0c6759f,0,...) at taskqueue_run+0x103
 taskqueue_thread_loop(c5ba2074,e5d72d38,c0c6cc30,33e,c0dc34a0,...) at taskq=
 ueue_thread_loop+0x68
 fork_exit(c08ba280,c5ba2074,e5d72d38) at fork_exit+0xb8
 fork_trampoline() at fork_trampoline+0x8
 --- trap 0, eip =3D 0, esp =3D 0xe5d72d70, ebp =3D 0 ---
 wpi_newstate: AUTH -> ASSOC flags 0x0
 wpi_newstate: ASSOC -> RUN flags 0x0
 config chan 6 flags 8035
 wlan0: link state changed to UP
 wpi0: need multicast update callback
 wpi0: need multicast update callback
 wpi0: need multicast update callback
 lock order reversal:
  1st 0xc55f01e0 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2559
  2nd 0xc6405600 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:285
 KDB: stack backtrace:
 db_trace_self_wrapper(c0c74987,e830e850,c08c0f75,c08b1cfb,c0c7785a,...) at =
 db_trace_self_wrapper+0x26
 kdb_backtrace(c08b1cfb,c0c7785a,c592bef8,c592f7d8,e830e8ac,...) at kdb_back=
 trace+0x29
 _witness_debugger(c0c7785a,c6405600,c0c98a02,c592f7d8,c0c9869b,...) at _wit=
 ness_debugger+0x25
 witness_checkorder(c6405600,9,c0c9869b,11d,0,...) at witness_checkorder+0x8=
 39
 _sx_xlock(c6405600,0,c0c9869b,11d,c63bac3c,...) at _sx_xlock+0x85
 ufsdirhash_acquire(c55f0180,dae03e00,200,dae03e4c,e830e97c,...) at ufsdirha=
 sh_acquire+0x35
 ufsdirhash_add(c63bac3c,e830ea0c,23e4c,e830e968,e830e96c,...) at ufsdirhash=
 _add+0x13
 ufs_direnter(c63fbb84,0,e830ea0c,e830eba0,0,...) at ufs_direnter+0x729
 ufs_rename(e830ec1c,0,c7bcca78,e830ebc8,0,...) at ufs_rename+0x717
 VOP_RENAME_APV(c0d78220,e830ec1c,0,0,e830eba0,...) at VOP_RENAME_APV+0xa5
 kern_renameat(c6148d80,ffffff9c,bfbfecf7,ffffff9c,bfbfed3b,...) at kern_ren=
 ameat+0x307
 kern_rename(c6148d80,bfbfecf7,bfbfed3b,0,e830ed2c,...) at kern_rename+0x36
 rename(c6148d80,e830ecf8,8,c6148d80,c0d57700,...) at rename+0x29
 syscall(e830ed38) at syscall+0x2a3
 Xint0x80_syscall() at Xint0x80_syscall+0x20
 --- syscall (128, FreeBSD ELF32, rename), eip =3D 0x280d975b, esp =3D 0xbfb=
 fe05c, ebp =3D 0xbfbfe6f8 ---
 wpi_newstate: RUN -> AUTH flags 0x0
 config chan 6 flags 8035 cck f ofdm 15
 wlan0: link state changed to DOWN
 wpi_newstate: AUTH -> AUTH flags 0x0
 config chan 6 flags 8035 cck f ofdm 15
 wpi_newstate: AUTH -> ASSOC flags 0x0
 wpi_newstate: ASSOC -> RUN flags 0x0
 config chan 6 flags 8035
 wlan0: link state changed to UP
 wpi0: need multicast update callback
 wpi0: need multicast update callback
 wpi_newstate: RUN -> AUTH flags 0x0
 config chan 6 flags 8035 cck f ofdm 15
 wlan0: link state changed to DOWN
 wpi_newstate: AUTH -> AUTH flags 0x0
 config chan 6 flags 8035 cck f ofdm 15
 wpi_newstate: AUTH -> ASSOC flags 0x0
 wpi_newstate: ASSOC -> RUN flags 0x0
 config chan 6 flags 8035
 wlan0: link state changed to UP
 wpi0: fatal firmware error
 wpi0: timeout resetting Rx ring
 microcode alive notification version 10e02 alive 1
 microcode alive notification version 10e02 alive 1
 wpi_newstate: RUN -> AUTH flags 0x0
 config chan 6 flags 8005 cck f ofdm 15
 wlan0: link state changed to DOWN
 wpi_newstate: AUTH -> AUTH flags 0x0
 config chan 6 flags 8005 cck f ofdm 15
 wpi_newstate: AUTH -> ASSOC flags 0x0
 wpi_newstate: ASSOC -> RUN flags 0x0
 config chan 6 flags 8035
 wlan0: link state changed to UP
 
 
 
 
 ----------------------------------------------------------------------
 Zobacz nowego Lambo reventon roadster 
 Klikinij >>>http://link.interia.pl/f2363
 
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->closed 
State-Changed-By: linimon 
State-Changed-When: Mon Sep 21 07:17:04 UTC 2009 
State-Changed-Why:  
Misfiled followup to kern/138739; content migrated. 


Responsible-Changed-From-To: gnats-admin->freebsd-bugs 
Responsible-Changed-By: linimon 
Responsible-Changed-When: Mon Sep 21 07:17:04 UTC 2009 
Responsible-Changed-Why:  

http://www.freebsd.org/cgi/query-pr.cgi?pr=139007 
>Unformatted:
