From nobody@FreeBSD.org  Fri Sep  5 02:55:25 2008
Return-Path: <nobody@FreeBSD.org>
Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34])
	by hub.freebsd.org (Postfix) with ESMTP id 5F9C51065678
	for <freebsd-gnats-submit@FreeBSD.org>; Fri,  5 Sep 2008 02:55:25 +0000 (UTC)
	(envelope-from nobody@FreeBSD.org)
Received: from www.freebsd.org (www.freebsd.org [IPv6:2001:4f8:fff6::21])
	by mx1.freebsd.org (Postfix) with ESMTP id 4DD318FC19
	for <freebsd-gnats-submit@FreeBSD.org>; Fri,  5 Sep 2008 02:55:25 +0000 (UTC)
	(envelope-from nobody@FreeBSD.org)
Received: from www.freebsd.org (localhost [127.0.0.1])
	by www.freebsd.org (8.14.2/8.14.2) with ESMTP id m852tPuj010517
	for <freebsd-gnats-submit@FreeBSD.org>; Fri, 5 Sep 2008 02:55:25 GMT
	(envelope-from nobody@www.freebsd.org)
Received: (from nobody@localhost)
	by www.freebsd.org (8.14.2/8.14.1/Submit) id m852tPbM010516;
	Fri, 5 Sep 2008 02:55:25 GMT
	(envelope-from nobody)
Message-Id: <200809050255.m852tPbM010516@www.freebsd.org>
Date: Fri, 5 Sep 2008 02:55:25 GMT
From: Pavel <figyshki@gmail.com>
To: freebsd-gnats-submit@FreeBSD.org
Subject: Intel 3945ABG (wpi) low throughput
X-Send-Pr-Version: www-3.1
X-GNATS-Notify:

>Number:         127102
>Category:       kern
>Synopsis:       [wpi] Intel 3945ABG low throughput
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    bschmidt
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Fri Sep 05 03:00:11 UTC 2008
>Closed-Date:    Fri Jan 07 20:23:57 UTC 2011
>Last-Modified:  Fri Jan 07 20:23:57 UTC 2011
>Originator:     Pavel
>Release:        7.1-PRERELEASE (RELENG_7)
>Organization:
>Environment:
FreeBSD lapa-tyapa.domain 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #0: Thu Sep  4 22:02:10 EDT 2008     root@lapa-tyapa.domain:/usr/obj/usr/src/sys/GENERIC  amd64
>Description:
Environment:
Hardware: Clevo M570TU, integrated WiFi
CVSup'ed 03 Sept 2008 against RELENG_7 branch. Same behavior seen in 7-STABLE.

Cablevision's cable modem to PFsense 1.2-RELEASE access point. WPA-PSK in use. 30-char WPA passphrase.

/etc/wpa_supplicant.conf (sanitized):
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
fast_reauth=1
eapol_version=1

#
# WPA2 auth for here.
#
network={
        ssid="Moria"
        scan_ssid=1
        proto=WPA2
        key_mgmt=WPA-PSK
        psk=<EncodedStringHere>
}

wpi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 00:1c:bf:6c:39:f5
        inet 10.0.0.21 netmask 0xffffff00 broadcast 10.0.0.255
        media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/54Mbps)
        status: associated
        ssid Moria channel 36 (5180 Mhz 11a) bssid 00:02:6f:4b:c6:ec
        authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit
        TKIP 3:128-bit txpower 50 bmiss 7 scanvalid 60 roaming MANUAL

/etc/rc.conf has: 'fconfig_wpi0="WPA DHCP"'

Transfers crawl at speeds measured in bps, ~900 bps.
>How-To-Repeat:
Uncertain. Above-listed environment seems to do it, though.
>Fix:


Patch attached with submission follows:

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-PRERELEASE #0: Thu Sep  4 22:02:10 EDT 2008
    root@lapa-tyapa.domain:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz (2394.01-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fa  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
usable memory = 2132475904 (2033 MB)
avail memory  = 2057699328 (1962 MB)
ACPI APIC Table: <INTEL  CRESTLNE>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <MSTEST TESTONLY> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xce000000-0xceffffff,0xd0000000-0xdfffffff,0xcc000000-0xcdffffff irq 16 at device 0.0 on pci1
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1800-0x181f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1820-0x183f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xf0f04000-0xf0f043ff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
ugen0: <Syntek USB2.0, class 0/0, rev 2.00/0.05, addr 2> on uhub2
pcm0: <Intel 82801H High Definition Audio Controller> mem 0xf0f00000-0xf0f03fff irq 22 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci6: <ACPI PCI bus> on pcib4
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xf0800000-0xf0800fff irq 18 at device 0.0 on pci6
wpi0: Ethernet address: 00:1c:bf:6c:39:f5
wpi0: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci8: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0x5000-0x50ff mem 0xf0a00000-0xf0a00fff irq 19 at device 0.0 on pci8
re0: turning off MSI enable bit.
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:90:f5:66:db:70
re0: [FILTER]
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci10: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci11: <ACPI PCI bus> on pcib7
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x1840-0x185f irq 23 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x1860-0x187f irq 19 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x1880-0x189f irq 18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xf0f04400-0xf0f047ff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci12: <ACPI PCI bus> on pcib8
pci12: <memory, flash> at device 7.0 (no driver attached)
pci12: <base peripheral> at device 7.1 (no driver attached)
pci12: <memory, flash> at device 7.3 (no driver attached)
fwohci0: <VIA Fire II (VT6306)> port 0x6000-0x607f mem 0xf0c00000-0xf0c007ff irq 19 at device 9.0 on pci12
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:06:66:00:00:00:2d
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x112c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:06:00:00:2d
fwe0: Ethernet address: 02:11:06:00:00:2d
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:11:06:66:00:00:00:2d @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef,0x18d0-0x18df at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xce000-0xcefff,0xe0000-0xe17ff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen1: <TouchStrip Fingerprint Sensor, class 0/0, rev 1.00/0.01, addr 2> on uhub1
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad0: 114473MB <Seagate ST9120823AS 3.AAB> at ata0-master SATA150
GEOM_LABEL: Label for provider ad0s1 is msdosfs/grub.
acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/TI03> at ata1-master UDMA33
pcm0: <HDA Codec: Realtek ALC883>
pcm0: <HDA Driver Revision: 20080420_0052>
GEOM_LABEL: Label for provider ad0s5 is ntfs/XP_DATA.
GEOM_LABEL: Label for provider ad0s6 is msdosfs/Shared_Data.
GEOM_LABEL: Label for provider acd0 is iso9660/GTA_SAN_ANDREAS.
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s3a
GEOM_LABEL: Label msdosfs/grub removed.
GEOM_LABEL: Label msdosfs/Shared_Data removed.
wpi0: timeout resetting Tx ring 1
wpi0: timeout resetting Tx ring 3
wpi0: timeout resetting Tx ring 4
wpi0: fatal firmware error
wpi0: timeout resetting Rx ring
fire_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (fire_saver, 0xffffffffae7cd000, 0) error 19

****************************
pfsense's dmesg:

$ dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p11 #0: Sun Feb 24 17:36:53 EST 2008
    sullrich@builder6.pfsense.com:/usr/obj.pfSense/usr/src/sys/pfSense_wrap.6
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by AMD PCS (498.05-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x5a2  Stepping = 2
  Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
  AMD Features=0xc0400000<MMX+,3DNow+,3DNow>
real memory  = 268435456 (256 MB)
avail memory = 253272064 (241 MB)
pnpbios: Bad PnP BIOS data checksum
wlan: mac acl policy registered
K6-family MTRR support enabled (2 registers)
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
MFGPT bar: f00100006200
pci0: <encrypt/decrypt, entertainment crypto> at device 1.2 (no driver attached)
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1000-0x10ff mem 0xe0000000-0xe00000ff irq 10 at device 9.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:0d:b9:13:ae:04
vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1400-0x14ff mem 0xe0040000-0xe00400ff irq 12 at device 11.0 on pci0
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: Ethernet address: 00:0d:b9:13:ae:05
ath0: <Atheros 5212> mem 0xe0080000-0xe008ffff irq 11 at device 14.0 on pci0
ath0: Ethernet address: 00:02:6f:4b:c6:ec
ath0: mac 10.4 phy 6.1 radio 6.3
isab0: <PCI-ISA bridge> port 0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x9d7f,0x9c00-0x9c3f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 15.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xefffe000-0xefffefff irq 15 at device 15.4 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0: <AMD CS5536 USB 2.0 controller> mem 0xefffd000-0xefffdfff irq 15 at device 15.5 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <AMD CS5536 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: AMD EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
orm0: <ISA Option ROM> at iomem 0xe0000-0xea7ff on isa0
ppc0: parallel port not found.
sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
RTC BIOS diagnostic error 80<clock_battery>
Timecounter "TSC" frequency 498052719 Hz quality 800
Timecounters tick every 10.000 msec
Fast IPsec: Initialized Security Association Processing.
ad0: 1953MB <SanDisk SDCFH-2048 HDX 4.04> at ata0-master PIO4
GEOM_LABEL: Label for provider ad0a is ufs/pfSense.
GEOM_LABEL: Label for provider ad0d is ufs/pfSenseCfg.
Trying to mount root from ufs:/dev/ufs/pfSense



>Release-Note:
>Audit-Trail:
Responsible-Changed-From-To: freebsd-amd64->freebsd-net 
Responsible-Changed-By: linimon 
Responsible-Changed-When: Fri Sep 5 03:16:19 UTC 2008 
Responsible-Changed-Why:  
Probably not amd64-specific. 

http://www.freebsd.org/cgi/query-pr.cgi?pr=127102 

From: "j0 m4m4" <figyshki@gmail.com>
To: bug-followup@FreeBSD.org, figyshki@gmail.com
Cc:  
Subject: Re: kern/127102: [wpi] Intel 3945ABG low throughput
Date: Thu, 4 Sep 2008 23:43:33 -0400

 ------=_Part_14797_25734829.1220586213145
 Content-Type: text/plain; charset=ISO-8859-1
 Content-Transfer-Encoding: 7bit
 Content-Disposition: inline
 
 Same hardware has no issues under Windows and OpenSuSe 10.3 (x86_64).
 
 ------=_Part_14797_25734829.1220586213145
 Content-Type: text/html; charset=ISO-8859-1
 Content-Transfer-Encoding: 7bit
 Content-Disposition: inline
 
 <div dir="ltr">Same hardware has no issues under Windows and OpenSuSe 10.3 (x86_64).<br></div>
 
 ------=_Part_14797_25734829.1220586213145--

From: "=?KOI8-R?B?7sUg5MHN09E=?=" <figyshki@gmail.com>
To: bug-followup@freebsd.org
Cc:  
Subject: Re: kern/127102: [wpi] Intel 3945ABG low throughput
Date: Tue, 9 Sep 2008 13:15:29 -0400

 ------=_Part_24971_5426585.1220980530002
 Content-Type: text/plain; charset=ISO-8859-1
 Content-Transfer-Encoding: 7bit
 Content-Disposition: inline
 
 Curious discovery. Similar behavior (slow throughput) is experienced under
 Windows on battery power, but not on AC power. Under FreeBSD, the behavior
 is experienced under AC power or battery power.
 
 ------=_Part_24971_5426585.1220980530002
 Content-Type: text/html; charset=ISO-8859-1
 Content-Transfer-Encoding: 7bit
 Content-Disposition: inline
 
 <div dir="ltr">Curious discovery. Similar behavior (slow throughput) is experienced under Windows on battery power, but not on AC power. Under FreeBSD, the behavior is experienced under AC power or battery power.<br></div>
 
 ------=_Part_24971_5426585.1220980530002--
State-Changed-From-To: open->feedback 
State-Changed-By: bschmidt 
State-Changed-When: Mon Dec 20 13:35:50 UTC 2010 
State-Changed-Why:  
Is that still an issue on a recent stable/7 setup? 


Responsible-Changed-From-To: freebsd-net->bschmidt 
Responsible-Changed-By: bschmidt 
Responsible-Changed-When: Mon Dec 20 13:35:50 UTC 2010 
Responsible-Changed-Why:  
over to me 

http://www.freebsd.org/cgi/query-pr.cgi?pr=127102 

From: =?UTF-8?B?0J3QtSDQlNCw0LzRgdGP?= <figyshki@gmail.com>
To: bug-followup@freebsd.org, figyshki@gmail.com
Cc:  
Subject: Re: kern/127102: [wpi] Intel 3945ABG low throughput
Date: Fri, 7 Jan 2011 14:44:12 -0500

 --0015174c3d3cbbc096049946d793
 Content-Type: text/plain; charset=ISO-8859-1
 
 Original hardware is MIA, so it is not possible to replicate or test.
 
 Please close this PR.
 
 --0015174c3d3cbbc096049946d793
 Content-Type: text/html; charset=ISO-8859-1
 
 Original hardware is MIA, so it is not possible to replicate or test. <br><br>Please close this PR.<br>
 
 --0015174c3d3cbbc096049946d793--
State-Changed-From-To: feedback->closed 
State-Changed-By: bschmidt 
State-Changed-When: Fri Jan 7 20:23:08 UTC 2011 
State-Changed-Why:  
closed on request by originator 

http://www.freebsd.org/cgi/query-pr.cgi?pr=127102 
>Unformatted:
