From nobody@FreeBSD.org  Tue Sep 18 17:25:22 2007
Return-Path: <nobody@FreeBSD.org>
Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34])
	by hub.freebsd.org (Postfix) with ESMTP id D472316A41B
	for <freebsd-gnats-submit@FreeBSD.org>; Tue, 18 Sep 2007 17:25:22 +0000 (UTC)
	(envelope-from nobody@FreeBSD.org)
Received: from www.freebsd.org (www.freebsd.org [IPv6:2001:4f8:fff6::21])
	by mx1.freebsd.org (Postfix) with ESMTP id C997113C465
	for <freebsd-gnats-submit@FreeBSD.org>; Tue, 18 Sep 2007 17:25:22 +0000 (UTC)
	(envelope-from nobody@FreeBSD.org)
Received: from www.freebsd.org (localhost [127.0.0.1])
	by www.freebsd.org (8.14.1/8.14.1) with ESMTP id l8IHPMSi053090
	for <freebsd-gnats-submit@FreeBSD.org>; Tue, 18 Sep 2007 17:25:22 GMT
	(envelope-from nobody@www.freebsd.org)
Received: (from nobody@localhost)
	by www.freebsd.org (8.14.1/8.14.1/Submit) id l8IHPMsa053089;
	Tue, 18 Sep 2007 17:25:22 GMT
	(envelope-from nobody)
Message-Id: <200709181725.l8IHPMsa053089@www.freebsd.org>
Date: Tue, 18 Sep 2007 17:25:22 GMT
From: Stphane Thibaud <snthibaud@gmail.com>
To: freebsd-gnats-submit@FreeBSD.org
Subject: Atheros 5005G (AR5212) miniPCI: unable to attach device hal status 3
X-Send-Pr-Version: www-3.1
X-GNATS-Notify:

>Number:         116444
>Category:       kern
>Synopsis:       [ath] Atheros 5005G (AR5212) miniPCI: unable to attach device hal status 3
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    vwe
>State:          suspended
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Sep 18 17:30:02 GMT 2007
>Closed-Date:    
>Last-Modified:  Sat Jan 31 22:50:01 UTC 2009
>Originator:     Stphane Thibaud
>Release:        FreeBSD 6.2-RELEASE
>Organization:
>Environment:
>Description:
Couldn't get the environment output... my FreeBSD isn't installed anymore
on my laptop because of this issue, but I would like to get back.

I have a laptop with a miniPCI version of the Atheros 5005G (I'm sure
it is, Vista says it and the deviceID's correspond too). Under madwifi it
works as explained in this madwifi ticket: http://madwifi.org/ticket/1546,
but FreeBSD uses different code apparently. 

It should be noted that hal stops with error status 3 (unable to attach
device), not 13. So it's not about unrecognized hardware at first glance,
and the 5005G should be supported anyway (according to the ath manpage).
>How-To-Repeat:
By booting with a standard kernel.
>Fix:


>Release-Note:
>Audit-Trail:
Responsible-Changed-From-To: freebsd-bugs->freebsd-net 
Responsible-Changed-By: vwe 
Responsible-Changed-When: Wed Jan 14 23:43:43 UTC 2009 
Responsible-Changed-Why:  

Over to maintainer(s). 

http://www.freebsd.org/cgi/query-pr.cgi?pr=116444 
State-Changed-From-To: open->suspended 
State-Changed-By: vwe 
State-Changed-When: Fri Jan 30 22:06:41 UTC 2009 
State-Changed-Why:  
Stephane, 
without seeing any details at all (the madwifi ticket URL is also invalid) 
there's nothing we can do about your issue. Please feel free to give 
us device specific information like a verbose boot dmesg, pciconf -lv, 
devinfo -rv and the like. Also if you think your issue should be worked out, 
please check a more recent relase of FreeBSD. 
Thank you for reporting! 
As we think we're unable to do anything for this problem ATM, we're 
suspending this PR. 


Responsible-Changed-From-To: freebsd-net->vwe 
Responsible-Changed-By: vwe 
Responsible-Changed-When: Fri Jan 30 22:06:41 UTC 2009 
Responsible-Changed-Why:  
track 

http://www.freebsd.org/cgi/query-pr.cgi?pr=116444 

From: Dalibor Gudzic <dalibor.gudzic@gmail.com>
To: bug-followup@FreeBSD.org, snthibaud@gmail.com
Cc:  
Subject: Re: kern/116444: [ath] Atheros 5005G (AR5212) miniPCI: unable to 
	attach device hal status 3
Date: Sat, 31 Jan 2009 23:31:45 +0100

 --0016e6de0373f2e5ec0461cee2c4
 Content-Type: text/plain; charset=ISO-8859-1
 Content-Transfer-Encoding: 7bit
 
 I'm not the original poster that has opened this PR, but I got the same
 error on FS Amilo Pro V3515 laptop. Here is more information:
 
 dmesg:
 
 Copyright (c) 1992-2009 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
     The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 7.1-RELEASE #0: Thu Jan  1 14:37:25 UTC 2009
     root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Intel(R) Celeron(R) M CPU        430  @ 1.73GHz (1729.02-MHz 686-class
 CPU)
   Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
 
 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
   Features2=0xc109<SSE3,MON,TM2,xTPR,PDCM>
   AMD Features=0x100000<NX>
 real memory  = 1541996544 (1470 MB)
 avail memory = 1497018368 (1427 MB)
 ACPI APIC Table: <PTLTD       APIC  >
 MADT: Forcing active-low polarity and level trigger for SCI
 ioapic0 <Version 0.3> irqs 0-23 on motherboard
 ioapic1 <Version 0.3> irqs 24-47 on motherboard
 kbd1 at kbdmux0
 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 acpi0: <FSC PC> on motherboard
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 acpi0: reservation of f0013000, 1000 (3) failed
 acpi0: reservation of 0, a0000 (3) failed
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
 acpi_button0: <Power Button> on acpi0
 acpi_lid0: <Control Method Lid Switch> on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 vgapci0: <VGA-compatible display> mem
 0xa0000000-0xbfffffff,0xc8000000-0xc8ffffff irq 16 at device 0.0 on pci1
 pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0
 pci2: <ACPI PCI bus> on pcib2
 pcib3: <ACPI PCI-PCI bridge> irq 31 at device 3.0 on pci0
 pci3: <ACPI PCI bus> on pcib3
 atapci0: <VIA 8237A SATA150 controller> port
 0x60b8-0x60bf,0x60b0-0x60b3,0x6008-0x600f,0x6004-0x6007,0x6010-0x601f,0x6400-0x64ff
 irq 21 at device 15.0 on pci0
 atapci0: [ITHREAD]
 ata2: <ATA channel 0> on atapci0
 ata2: [ITHREAD]
 ata3: <ATA channel 1> on atapci0
 ata3: [ITHREAD]
 atapci1: <VIA 8237A UDMA133 controller> port
 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x60a0-0x60af at device 15.1 on pci0
 ata0: <ATA channel 0> on atapci1
 ata0: [ITHREAD]
 ata1: <ATA channel 1> on atapci1
 ata1: [ITHREAD]
 uhci0: <VIA 83C572 USB controller> port 0x6020-0x603f irq 20 at device 16.0
 on pci0
 uhci0: [GIANT-LOCKED]
 uhci0: [ITHREAD]
 usb0: <VIA 83C572 USB controller> on uhci0
 usb0: USB revision 1.0
 uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 uhub0: 2 ports with 2 removable, self powered
 uhci1: <VIA 83C572 USB controller> port 0x6040-0x605f irq 22 at device 16.1
 on pci0
 uhci1: [GIANT-LOCKED]
 uhci1: [ITHREAD]
 usb1: <VIA 83C572 USB controller> on uhci1
 usb1: USB revision 1.0
 uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
 uhub1: 2 ports with 2 removable, self powered
 uhci2: <VIA 83C572 USB controller> port 0x6060-0x607f irq 21 at device 16.2
 on pci0
 uhci2: [GIANT-LOCKED]
 uhci2: [ITHREAD]
 usb2: <VIA 83C572 USB controller> on uhci2
 usb2: USB revision 1.0
 uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
 uhub2: 2 ports with 2 removable, self powered
 uhci3: <VIA 83C572 USB controller> port 0x6080-0x609f irq 23 at device 16.3
 on pci0
 uhci3: [GIANT-LOCKED]
 uhci3: [ITHREAD]
 usb3: <VIA 83C572 USB controller> on uhci3
 usb3: USB revision 1.0
 uhub3: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
 uhub3: 2 ports with 2 removable, self powered
 ehci0: <VIA VT6202 USB 2.0 controller> mem 0xc9400000-0xc94000ff irq 21 at
 device 16.4 on pci0
 ehci0: [GIANT-LOCKED]
 ehci0: [ITHREAD]
 usb4: waiting for BIOS to give up control
 usb4: timed out waiting for BIOS
 usb4: EHCI version 1.0
 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
 usb4: <VIA VT6202 USB 2.0 controller> on ehci0
 usb4: USB revision 2.0
 uhub4: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
 uhub4: 8 ports with 8 removable, self powered
 umass0: <vendor 0x3538 USB Mass Storage Device, class 0/0, rev 2.00/1.00,
 addr 2> on uhub4
 isab0: <PCI-ISA bridge> at device 17.0 on pci0
 isa0: <ISA bus> on isab0
 vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x6800-0x68ff mem
 0xc9400400-0xc94004ff irq 23 at device 18.0 on pci0
 vr0: Quirks: 0x0
 vr0: Revision: 0x7c
 miibus0: <MII bus> on vr0
 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
 ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 vr0: Ethernet address: 00:14:0b:08:64:5b
 vr0: [ITHREAD]
 pcib4: <ACPI PCI-PCI bridge> at device 19.0 on pci0
 pci4: <ACPI PCI bus> on pcib4
 pci4: <multimedia> at device 1.0 (no driver attached)
 pcib5: <ACPI PCI-PCI bridge> at device 19.1 on pci0
 pci5: <ACPI PCI bus> on pcib5
 ath0: <Atheros 5212> mem 0xc9000000-0xc900ffff irq 18 at device 1.0 on pci5
 ath0: [ITHREAD]
 ath0: unable to attach hardware; HAL status 3
 device_attach: ath0 attach returned 6
 acpi_acad0: <AC Adapter> on acpi0
 battery0: <ACPI Control Method Battery> on acpi0
 acpi_tz0: <Thermal Zone> on acpi0
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 atkbd0: [ITHREAD]
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: [ITHREAD]
 psm0: model GlidePoint, device ID 0
 cpu0: <ACPI CPU> on acpi0
 p4tcc0: <CPU Frequency Thermal Control> on cpu0
 pmtimer0 on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sio0: configured irq 4 not in bitmap of probed irqs 0
 sio0: port may not be enabled
 sio0: configured irq 4 not in bitmap of probed irqs 0
 sio0: port may not be enabled
 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
 sio0: type 8250 or not responding
 sio0: [FILTER]
 sio1: configured irq 3 not in bitmap of probed irqs 0
 sio1: port may not be enabled
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 Timecounter "TSC" frequency 1729018252 Hz quality 800
 Timecounters tick every 1.000 msec
 acd0: DVDR <HL-DT-ST DVDRAM GSA-T10N/PW02> at ata1-master UDMA33
 ad4: 57231MB <WDC WD600BEVS-07LAT0 01.06M01> at ata2-master SATA150
 GEOM_LABEL: Label for provider ad4s4 is ext2fs//.
 da0 at umass-sim0 bus 0 target 0 lun 0
 da0: <Generic USB Flash Disk 0.00> Removable Direct Access SCSI-2 device
 da0: 40.000MB/s transfers
 da0: 984MB (2015232 512 byte sectors: 64H 32S/T 984C)
 Trying to mount root from ufs:/dev/ad4s3a
 
 pciconf -lv:
 
 ath0@pci0:5:1:0:    class=0x020000 card=0x2052168c chip=0x001a168c rev=0x01
 hdr=0x00
     vendor     = 'Atheros Communications Inc.'
     device     = 'Atheros AR5005G Atheros AR5005G 802.11abg NIC Chipset /
 TP-Link (TL-WN551G)'
     class      = network
     subclass   = ethernet
 
 If there is something else I could provide, or even go to -current, pls let
 me know. Card is working properly with Windows XP and Fedora 10, but fails
 with both NetBSD and OpenSBD too.
 
 --0016e6de0373f2e5ec0461cee2c4
 Content-Type: text/html; charset=ISO-8859-1
 Content-Transfer-Encoding: quoted-printable
 
 I&#39;m not the original poster that has opened this PR, but I got the same=
  error on FS Amilo Pro V3515 laptop. Here is more information:<br><br>dmesg=
 :<br><br>Copyright (c) 1992-2009 The FreeBSD Project.<br>Copyright (c) 1979=
 , 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994<br>
 &nbsp;&nbsp;&nbsp; The Regents of the University of California. All rights =
 reserved.<br>FreeBSD is a registered trademark of The FreeBSD Foundation.<b=
 r>FreeBSD 7.1-RELEASE #0: Thu Jan&nbsp; 1 14:37:25 UTC 2009<br>&nbsp;&nbsp;=
 &nbsp; root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC<br>
 Timecounter &quot;i8254&quot; frequency 1193182 Hz quality 0<br>CPU: Intel(=
 R) Celeron(R) M CPU&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 430&nbsp; @ 1=
 .73GHz (1729.02-MHz 686-class CPU)<br>&nbsp; Origin =3D &quot;GenuineIntel&=
 quot;&nbsp; Id =3D 0x6e8&nbsp; Stepping =3D 8<br>&nbsp; Features=3D0xafe9fb=
 ff&lt;FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLF=
 LUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE&gt;<br>
 &nbsp; Features2=3D0xc109&lt;SSE3,MON,TM2,xTPR,PDCM&gt;<br>&nbsp; AMD Featu=
 res=3D0x100000&lt;NX&gt;<br>real memory&nbsp; =3D 1541996544 (1470 MB)<br>a=
 vail memory =3D 1497018368 (1427 MB)<br>ACPI APIC Table: &lt;PTLTD&nbsp; &n=
 bsp;&nbsp;&nbsp; &nbsp;APIC&nbsp; &gt;<br>MADT: Forcing active-low polarity=
  and level trigger for SCI<br>
 ioapic0 &lt;Version 0.3&gt; irqs 0-23 on motherboard<br>ioapic1 &lt;Version=
  0.3&gt; irqs 24-47 on motherboard<br>kbd1 at kbdmux0<br>ath_hal: 0.9.20.3 =
 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)<br>acpi0: &lt;FSC =
 PC&gt; on motherboard<br>
 acpi0: [ITHREAD]<br>acpi0: Power Button (fixed)<br>acpi0: reservation of f0=
 013000, 1000 (3) failed<br>acpi0: reservation of 0, a0000 (3) failed<br>Tim=
 ecounter &quot;ACPI-fast&quot; frequency 3579545 Hz quality 1000<br>acpi_ti=
 mer0: &lt;24-bit timer at 3.579545MHz&gt; port 0x4008-0x400b on acpi0<br>
 acpi_button0: &lt;Power Button&gt; on acpi0<br>acpi_lid0: &lt;Control Metho=
 d Lid Switch&gt; on acpi0<br>pcib0: &lt;ACPI Host-PCI bridge&gt; port 0xcf8=
 -0xcff on acpi0<br>pci0: &lt;ACPI PCI bus&gt; on pcib0<br>pcib1: &lt;ACPI P=
 CI-PCI bridge&gt; at device 1.0 on pci0<br>
 pci1: &lt;ACPI PCI bus&gt; on pcib1<br>vgapci0: &lt;VGA-compatible display&=
 gt; mem 0xa0000000-0xbfffffff,0xc8000000-0xc8ffffff irq 16 at device 0.0 on=
  pci1<br>pcib2: &lt;ACPI PCI-PCI bridge&gt; irq 27 at device 2.0 on pci0<br=
 >
 pci2: &lt;ACPI PCI bus&gt; on pcib2<br>pcib3: &lt;ACPI PCI-PCI bridge&gt; i=
 rq 31 at device 3.0 on pci0<br>pci3: &lt;ACPI PCI bus&gt; on pcib3<br>atapc=
 i0: &lt;VIA 8237A SATA150 controller&gt; port 0x60b8-0x60bf,0x60b0-0x60b3,0=
 x6008-0x600f,0x6004-0x6007,0x6010-0x601f,0x6400-0x64ff irq 21 at device 15.=
 0 on pci0<br>
 atapci0: [ITHREAD]<br>ata2: &lt;ATA channel 0&gt; on atapci0<br>ata2: [ITHR=
 EAD]<br>ata3: &lt;ATA channel 1&gt; on atapci0<br>ata3: [ITHREAD]<br>atapci=
 1: &lt;VIA 8237A UDMA133 controller&gt; port 0x1f0-0x1f7,0x3f6,0x170-0x177,=
 0x376,0x60a0-0x60af at device 15.1 on pci0<br>
 ata0: &lt;ATA channel 0&gt; on atapci1<br>ata0: [ITHREAD]<br>ata1: &lt;ATA =
 channel 1&gt; on atapci1<br>ata1: [ITHREAD]<br>uhci0: &lt;VIA 83C572 USB co=
 ntroller&gt; port 0x6020-0x603f irq 20 at device 16.0 on pci0<br>uhci0: [GI=
 ANT-LOCKED]<br>
 uhci0: [ITHREAD]<br>usb0: &lt;VIA 83C572 USB controller&gt; on uhci0<br>usb=
 0: USB revision 1.0<br>uhub0: &lt;VIA UHCI root hub, class 9/0, rev 1.00/1.=
 00, addr 1&gt; on usb0<br>uhub0: 2 ports with 2 removable, self powered<br>
 uhci1: &lt;VIA 83C572 USB controller&gt; port 0x6040-0x605f irq 22 at devic=
 e 16.1 on pci0<br>uhci1: [GIANT-LOCKED]<br>uhci1: [ITHREAD]<br>usb1: &lt;VI=
 A 83C572 USB controller&gt; on uhci1<br>usb1: USB revision 1.0<br>uhub1: &l=
 t;VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb1<br>
 uhub1: 2 ports with 2 removable, self powered<br>uhci2: &lt;VIA 83C572 USB =
 controller&gt; port 0x6060-0x607f irq 21 at device 16.2 on pci0<br>uhci2: [=
 GIANT-LOCKED]<br>uhci2: [ITHREAD]<br>usb2: &lt;VIA 83C572 USB controller&gt=
 ; on uhci2<br>
 usb2: USB revision 1.0<br>uhub2: &lt;VIA UHCI root hub, class 9/0, rev 1.00=
 /1.00, addr 1&gt; on usb2<br>uhub2: 2 ports with 2 removable, self powered<=
 br>uhci3: &lt;VIA 83C572 USB controller&gt; port 0x6080-0x609f irq 23 at de=
 vice 16.3 on pci0<br>
 uhci3: [GIANT-LOCKED]<br>uhci3: [ITHREAD]<br>usb3: &lt;VIA 83C572 USB contr=
 oller&gt; on uhci3<br>usb3: USB revision 1.0<br>uhub3: &lt;VIA UHCI root hu=
 b, class 9/0, rev 1.00/1.00, addr 1&gt; on usb3<br>uhub3: 2 ports with 2 re=
 movable, self powered<br>
 ehci0: &lt;VIA VT6202 USB 2.0 controller&gt; mem 0xc9400000-0xc94000ff irq =
 21 at device 16.4 on pci0<br>ehci0: [GIANT-LOCKED]<br>ehci0: [ITHREAD]<br>u=
 sb4: waiting for BIOS to give up control<br>usb4: timed out waiting for BIO=
 S<br>
 usb4: EHCI version 1.0<br>usb4: companion controllers, 2 ports each: usb0 u=
 sb1 usb2 usb3<br>usb4: &lt;VIA VT6202 USB 2.0 controller&gt; on ehci0<br>us=
 b4: USB revision 2.0<br>uhub4: &lt;VIA EHCI root hub, class 9/0, rev 2.00/1=
 .00, addr 1&gt; on usb4<br>
 uhub4: 8 ports with 8 removable, self powered<br>umass0: &lt;vendor 0x3538 =
 USB Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2&gt; on uhub4<br>i=
 sab0: &lt;PCI-ISA bridge&gt; at device 17.0 on pci0<br>isa0: &lt;ISA bus&gt=
 ; on isab0<br>
 vr0: &lt;VIA VT6102 Rhine II 10/100BaseTX&gt; port 0x6800-0x68ff mem 0xc940=
 0400-0xc94004ff irq 23 at device 18.0 on pci0<br>vr0: Quirks: 0x0<br>vr0: R=
 evision: 0x7c<br>miibus0: &lt;MII bus&gt; on vr0<br>ukphy0: &lt;Generic IEE=
 E 802.3u media interface&gt; PHY 1 on miibus0<br>
 ukphy0:&nbsp; 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto<br>vr0: =
 Ethernet address: 00:14:0b:08:64:5b<br>vr0: [ITHREAD]<br>pcib4: &lt;ACPI PC=
 I-PCI bridge&gt; at device 19.0 on pci0<br>pci4: &lt;ACPI PCI bus&gt; on pc=
 ib4<br>
 pci4: &lt;multimedia&gt; at device 1.0 (no driver attached)<br>pcib5: &lt;A=
 CPI PCI-PCI bridge&gt; at device 19.1 on pci0<br>pci5: &lt;ACPI PCI bus&gt;=
  on pcib5<br>ath0: &lt;Atheros 5212&gt; mem 0xc9000000-0xc900ffff irq 18 at=
  device 1.0 on pci5<br>
 ath0: [ITHREAD]<br>ath0: unable to attach hardware; HAL status 3<br>device_=
 attach: ath0 attach returned 6<br>acpi_acad0: &lt;AC Adapter&gt; on acpi0<b=
 r>battery0: &lt;ACPI Control Method Battery&gt; on acpi0<br>acpi_tz0: &lt;T=
 hermal Zone&gt; on acpi0<br>
 atkbdc0: &lt;Keyboard controller (i8042)&gt; port 0x60,0x64 irq 1 on acpi0<=
 br>atkbd0: &lt;AT Keyboard&gt; irq 1 on atkbdc0<br>kbd0 at atkbd0<br>atkbd0=
 : [GIANT-LOCKED]<br>atkbd0: [ITHREAD]<br>psm0: &lt;PS/2 Mouse&gt; irq 12 on=
  atkbdc0<br>
 psm0: [GIANT-LOCKED]<br>psm0: [ITHREAD]<br>psm0: model GlidePoint, device I=
 D 0<br>cpu0: &lt;ACPI CPU&gt; on acpi0<br>p4tcc0: &lt;CPU Frequency Thermal=
  Control&gt; on cpu0<br>pmtimer0 on isa0<br>sc0: &lt;System console&gt; at =
 flags 0x100 on isa0<br>
 sc0: VGA &lt;16 virtual consoles, flags=3D0x300&gt;<br>sio0: configured irq=
  4 not in bitmap of probed irqs 0<br>sio0: port may not be enabled<br>sio0:=
  configured irq 4 not in bitmap of probed irqs 0<br>sio0: port may not be e=
 nabled<br>
 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0<br>sio0: type 8250 or not=
  responding<br>sio0: [FILTER]<br>sio1: configured irq 3 not in bitmap of pr=
 obed irqs 0<br>sio1: port may not be enabled<br>vga0: &lt;Generic ISA VGA&g=
 t; at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0<br>
 Timecounter &quot;TSC&quot; frequency 1729018252 Hz quality 800<br>Timecoun=
 ters tick every 1.000 msec<br>acd0: DVDR &lt;HL-DT-ST DVDRAM GSA-T10N/PW02&=
 gt; at ata1-master UDMA33<br>ad4: 57231MB &lt;WDC WD600BEVS-07LAT0 01.06M01=
 &gt; at ata2-master SATA150<br>
 GEOM_LABEL: Label for provider ad4s4 is ext2fs//.<br>da0 at umass-sim0 bus =
 0 target 0 lun 0<br>da0: &lt;Generic USB Flash Disk 0.00&gt; Removable Dire=
 ct Access SCSI-2 device <br>da0: 40.000MB/s transfers<br>da0: 984MB (201523=
 2 512 byte sectors: 64H 32S/T 984C)<br>
 Trying to mount root from ufs:/dev/ad4s3a<br><br>pciconf -lv:<br><br>ath0@p=
 ci0:5:1:0:&nbsp;&nbsp;&nbsp; class=3D0x020000 card=3D0x2052168c chip=3D0x00=
 1a168c rev=3D0x01 hdr=3D0x00<br>&nbsp;&nbsp;&nbsp; vendor&nbsp;&nbsp;&nbsp;=
 &nbsp; =3D &#39;Atheros Communications Inc.&#39;<br>&nbsp;&nbsp;&nbsp; devi=
 ce&nbsp;&nbsp;&nbsp;&nbsp; =3D &#39;Atheros AR5005G Atheros AR5005G 802.11a=
 bg NIC Chipset / TP-Link (TL-WN551G)&#39;<br>
 &nbsp;&nbsp;&nbsp; class&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; =3D network<br>&nbsp=
 ;&nbsp;&nbsp; subclass&nbsp;&nbsp; =3D ethernet<br><br>If there is somethin=
 g else I could provide, or even go to -current, pls let me know. Card is wo=
 rking properly with Windows XP and Fedora 10, but fails with both NetBSD an=
 d OpenSBD too.<br>
 
 --0016e6de0373f2e5ec0461cee2c4--
>Unformatted:
