From nobody@FreeBSD.org  Fri Feb 24 08:39:50 2006
Return-Path: <nobody@FreeBSD.org>
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id 25C3316A420
	for <freebsd-gnats-submit@FreeBSD.org>; Fri, 24 Feb 2006 08:39:50 +0000 (GMT)
	(envelope-from nobody@FreeBSD.org)
Received: from www.freebsd.org (www.freebsd.org [216.136.204.117])
	by mx1.FreeBSD.org (Postfix) with ESMTP id E7C4943D45
	for <freebsd-gnats-submit@FreeBSD.org>; Fri, 24 Feb 2006 08:39:49 +0000 (GMT)
	(envelope-from nobody@FreeBSD.org)
Received: from www.freebsd.org (localhost [127.0.0.1])
	by www.freebsd.org (8.13.1/8.13.1) with ESMTP id k1O8dnAH061872
	for <freebsd-gnats-submit@FreeBSD.org>; Fri, 24 Feb 2006 08:39:49 GMT
	(envelope-from nobody@www.freebsd.org)
Received: (from nobody@localhost)
	by www.freebsd.org (8.13.1/8.13.1/Submit) id k1O8dnZB061871;
	Fri, 24 Feb 2006 08:39:49 GMT
	(envelope-from nobody)
Message-Id: <200602240839.k1O8dnZB061871@www.freebsd.org>
Date: Fri, 24 Feb 2006 08:39:49 GMT
From: Curtis Wilson <mrfordwrench@powerpony.net>
To: freebsd-gnats-submit@FreeBSD.org
Subject: freebsd 6.0 hangs on atkbd0 on Proliant 1850r server and Dl380 server
X-Send-Pr-Version: www-2.3
X-GNATS-Notify: peterjeremy@optushome.com.au

>Number:         93787
>Category:       i386
>Synopsis:       [hang] freebsd 6.0 hangs on atkbd0 on Proliant 1850r server and Dl380 server
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    gavin
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Fri Feb 24 08:40:06 GMT 2006
>Closed-Date:    
>Last-Modified:  Thu Jan 14 11:55:48 UTC 2010
>Originator:     Curtis Wilson
>Release:        Using 5.4 right now because 6.0 will not install
>Organization:
none
>Environment:
FreeBSD ralph.gateway.2wire.net 5.4-RELEASE FreeBSD 5.4-RELEASE #0: Wed Feb 22 22:21:49 CST 2006     root@ralph.powerpony.net:/usr/src/sys/i386/compile/MUSTANGBSD  i386           
>Description:
Compaq proliant 1850r
2xP3 600
1gig ram
3x9 raid with Compaq 2dh controller
1x36 scsi hd on port2


When trying to install fbsd V6.0 the system hangs on atkbd0.

also above the atkbd0 before it hangs it says the following:

uhci0: <Intel 82371 AB/EB (PIIx4) USB controller> at device 20.2 on pcio
pcib0: unable to route slot 20 INTD
uhci0: could not allocate irq
device_attach: uhci0 attach returned 6              
>How-To-Repeat:
Try to install V6.0 on any Compaq proliant 1850r, 1600, or Dl380.

              
>Fix:
              
>Release-Note:
>Audit-Trail:

From: Jeff at NorrisTechs <jeff@norristechs.net>
To: bug-followup@FreeBSD.org
Cc:  
Subject: re:i386/93787 follow  up
Date: Tue, 05 Sep 2006 09:07:18 -0600

 This is a multi-part message in MIME format.
 --------------060102040504040604000403
 Content-Type: text/plain; charset=ISO-8859-1; format=flowed
 Content-Transfer-Encoding: 7bit
 
 
 status reports for bug i386/93787
 
 --------------060102040504040604000403--

From: Peter Jeremy <peterjeremy@optushome.com.au>
To: bug-followup@FreeBSD.org, mrfordwrench@powerpony.net
Cc:  
Subject: Re: i386/93787: freebsd 6.0 hangs on atkbd0 on Proliant 1850r server and Dl380 server
Date: Fri, 27 Oct 2006 18:50:20 +1000

 --bg08WKrSYDhXBjb5
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: inline
 Content-Transfer-Encoding: quoted-printable
 
 I'm getting the same problem with 6.1-RELEASE on an uniprocessor
 1850R.  In my case the system is connected thru a KVM which may be an
 issue but I was not in a position to test without the KVM.
 
 Disabling atkbdc0 and sc0 in the boot loader and using a serial console
 works.  I'm updating the system to 6-STABLE to see if that helps.
 
 In my case, ACPI will not start - the boot loader reports a checksum
 error - and is disabled.
 
 --=20
 Peter Jeremy
 
 --bg08WKrSYDhXBjb5
 Content-Type: application/pgp-signature
 Content-Disposition: inline
 
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.5 (FreeBSD)
 
 iD8DBQFFQchM/opHv/APuIcRAgJxAKCO6Qrzmfo7axVjLKTrUXpxDEhdKwCeNViX
 1wHU4rAoxWZqpvHpr5jiWek=
 =DZ/1
 -----END PGP SIGNATURE-----
 
 --bg08WKrSYDhXBjb5--
State-Changed-From-To: open->feedback 
State-Changed-By: gavin 
State-Changed-When: Wed Mar 11 16:02:07 UTC 2009 
State-Changed-Why:  
To submitter: apologies for this PR sitting idle for so long.  Do you know 
if this problem was ever resolved?  If you still have this system and are 
still interested in the issue could you please retest with 7.1-RELEASE (or 
6.4-RELEASE if you can't test 7.x) and provide a full verbose dmesg, as 
well as the output of "pciconf -lv" from the affected system? 


Responsible-Changed-From-To: freebsd-i386->gavin 
Responsible-Changed-By: gavin 
Responsible-Changed-When: Wed Mar 11 16:02:07 UTC 2009 
Responsible-Changed-Why:  
Track 

http://www.freebsd.org/cgi/query-pr.cgi?pr=93787 
State-Changed-From-To: feedback->closed 
State-Changed-By: gavin 
State-Changed-When: Wed Jan 13 22:28:49 UTC 2010 
State-Changed-Why:  
Feedback timeout (~9 months) 

http://www.freebsd.org/cgi/query-pr.cgi?pr=93787 

From: Peter Jeremy <peterjeremy@acm.org>
To: gavin@FreeBSD.org, FreeBSD-gnats-submit@FreeBSD.org
Cc: mrfordwrench@powerpony.net
Subject: Re: i386/93787: [hang] freebsd 6.0 hangs on atkbd0 on Proliant
 1850r server and Dl380 server
Date: Thu, 14 Jan 2010 11:00:22 +1100

 --6c2NcOVqGQ03X4Wi
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: inline
 Content-Transfer-Encoding: quoted-printable
 
 On 2010-Jan-13 22:29:27 +0000, gavin@FreeBSD.org wrote:
 >State-Changed-Why:=20
 >Feedback timeout (~9 months)
 
 I do not appear to have been copied on the feedback request but I
 can confirm that the problem is still present on 7.2-RELEASE on
 my uniprocessor P1850.
 
 I will endeavour to get tha additional information requested
 
 --=20
 Peter Jeremy
 
 --6c2NcOVqGQ03X4Wi
 Content-Type: application/pgp-signature
 Content-Disposition: inline
 
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (FreeBSD)
 
 iEYEARECAAYFAktOXpUACgkQ/opHv/APuIeTJQCfd124A/E3yFf/S4iRHqQHOSsE
 U5QAoKT4BYec03MnBQ5x8U4cY1uD677L
 =gnwD
 -----END PGP SIGNATURE-----
 
 --6c2NcOVqGQ03X4Wi--

From: Peter Jeremy <peter.jeremy@alcatel-lucent.com>
To: bug-followup@FreeBSD.org, gavin@FreeBSD.org
Cc: mrfordwrench@powerpony.net
Subject: Re: i386/93787: [hang] freebsd 6.0 hangs on atkbd0 on Proliant
 1850r server and Dl380 server
Date: Thu, 14 Jan 2010 13:31:12 +1100

 --3uo+9/B/ebqu+fSQ
 Content-Type: multipart/mixed; boundary="BOKacYhQ+x31HxR3"
 Content-Disposition: inline
 
 
 --BOKacYhQ+x31HxR3
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: inline
 Content-Transfer-Encoding: quoted-printable
 
 Attached are verbose boot from 7.2-RELEASE CD-ROM (using 'boot -Dv',
 though the last line is identical when booted normally.  After the
 last 'atkbd' line, the keyboard is non-responsive (LEDs don't change
 with caps lock, numlock etc).
 
 There's also a normal 7.0 boot from the kernel this host usually
 runs (no atkbd) and a 'pciconf -lv' output.
 
 Note that ACPI fails with
 acpi: bad RSDP checksum (224)
 
 --=20
 Peter Jeremy
 
 --BOKacYhQ+x31HxR3
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: attachment; filename="7.2-verbose"
 
 SMAP type=01 base=0000000000000000 len=000000000009fc00
 SMAP type=02 base=000000000009fc00 len=0000000000000400
 SMAP type=02 base=00000000000f0000 len=0000000000010000
 SMAP type=01 base=0000000000100000 len=0000000007efc000
 SMAP type=03 base=0000000007ffc000 len=0000000000004000
 SMAP type=02 base=00000000fec00000 len=0000000000010000
 SMAP type=02 base=00000000fee00000 len=0000000000010000
 SMAP type=02 base=00000000fff80000 len=0000000000080000
 SMAP type=01 base=0000000100000000 len=0000000000000000
 Copyright (c) 1992-2009 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 7.2-RELEASE #0: Fri May  1 08:49:13 UTC 2009
     root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 Preloaded elf kernel "/boot/kernel/kernel" at 0xc1234000.
 Preloaded mfs_root "/boot/mfsroot" at 0xc1234194.
 Calibrating clock(s) ... i8254 clock: 1193153 Hz
 CLK_USE_I8254_CALIBRATION not specified - using default frequency
 Timecounter "i8254" frequency 1193182 Hz quality 0
 Calibrating TSC clock ... TSC clock: 598184321 Hz
 CPU: Pentium III/Pentium III Xeon/Celeron (598.18-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
   Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
 
 Instruction TLB: 4 KB pages, 4-way set associative, 32 entries
 Instruction TLB: 4 MB pages, fully associative, 2 entries
 Data TLB: 4 KB pages, 4-way set associative, 64 entries
 2nd-level cache: 512 KB, 4-way set associative, 32 byte line size
 1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size
 Data TLB: 4 MB Pages, 4-way set associative, 8 entries
 1st-level data cache: 16 KB, 4-way set associative, 32 byte line size
 real memory  = 134201344 (127 MB)
 Physical memory chunk(s):
 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
 0x0000000001425000 - 0x0000000007d79fff, 110448640 bytes (26965 pages)
 avail memory = 113041408 (107 MB)
 bios32: Found BIOS32 Service Directory header at 0xc00ffee0
 bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
 pcibios: PCI BIOS entry at 0xf0000+0x84
 Other BIOS signatures found:
 ULE: setup cpu group 0
 ULE: setup cpu 0
 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
 wlan_amrr: <AMRR Transmit Rate Control Algorithm>
 wlan: <802.11 Link Layer>
 null: <null device, zero device>
 random: <entropy source, Software, Yarrow>
 nfslock: pseudo-device
 io: <I/O>
 kbd: new array size 4
 kbd1 at kbdmux0
 mem: <memory>
 Pentium Pro MTRR support enabled
 hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (May  1 2009 08:47:24)
 npx0: INT 16 interface
 pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
 pci_open(1a):	mode1res=0x80000000 (0x80000000)
 pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71928086)
 pcibios: BIOS version 2.10
 pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> pcibus 0 on motherboard
 pci0: <PCI bus> on pcib0
 pci0: domain=0, physical bus=0
 found->	vendor=0x8086, dev=0x7192, revid=0x03
 	domain=0, bus=0, slot=0, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0106, statreg=0x2200, cachelnsz=0 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	map[10]: type Prefetchable Memory, range 32, base 0, size 28, enabled
 found->	vendor=0x1000, dev=0x000f, revid=0x14
 	domain=0, bus=0, slot=6, func=0
 	class=01-00-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0157, statreg=0x0200, cachelnsz=8 (dwords)
 	lattimer=0xff (7650 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
 	intpin=a, irq=10
 	map[10]: type I/O Port, range 32, base 0x2000, size  8, enabled
 	map[14]: type Memory, range 32, base 0xc6ffcf00, size  8, enabled
 	map[18]: type Memory, range 32, base 0xc6fff000, size 12, enabled
 found->	vendor=0x1000, dev=0x000f, revid=0x14
 	domain=0, bus=0, slot=6, func=1
 	class=01-00-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0157, statreg=0x0200, cachelnsz=8 (dwords)
 	lattimer=0xff (7650 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
 	intpin=b, irq=11
 	map[10]: type I/O Port, range 32, base 0x2400, size  8, enabled
 	map[14]: type Memory, range 32, base 0xc6ffce00, size  8, enabled
 	map[18]: type Memory, range 32, base 0xc6ffe000, size 12, enabled
 found->	vendor=0x0e11, dev=0xae43, revid=0x10
 	domain=0, bus=0, slot=7, func=0
 	class=02-80-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0147, statreg=0x0280, cachelnsz=8 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=15
 	map[10]: type I/O Port, range 32, base 0x2c80, size  4, enabled
 	map[14]: type Memory, range 32, base 0xc6ffcc70, size  4, enabled
 found->	vendor=0x1002, dev=0x4756, revid=0x7a
 	domain=0, bus=0, slot=8, func=0
 	class=03-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
 	powerspec 1  supports D0 D3  current D0
 	map[10]: type Prefetchable Memory, range 32, base 0xc5000000, size 24, enabled
 	map[14]: type I/O Port, range 32, base 0x2800, size  8, enabled
 	map[18]: type Memory, range 32, base 0xc6ffd000, size 12, enabled
 found->	vendor=0x0e11, dev=0xa0f0, revid=0x00
 	domain=0, bus=0, slot=9, func=0
 	class=08-80-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0143, statreg=0x0200, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
 	map[10]: type I/O Port, range 32, base 0x1800, size  8, enabled
 	map[14]: type Memory, range 32, base 0xc6ffcd00, size  8, enabled
 found->	vendor=0x10b7, dev=0x9055, revid=0x24
 	domain=0, bus=0, slot=16, func=0
 	class=02-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0157, statreg=0x0210, cachelnsz=8 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
 	intpin=a, irq=5
 	powerspec 1  supports D0 D1 D2 D3  current D0
 	map[10]: type I/O Port, range 32, base 0x2c00, size  7, enabled
 	map[14]: type Memory, range 32, base 0xc6ffcc80, size  7, enabled
 found->	vendor=0x8086, dev=0x7110, revid=0x02
 	domain=0, bus=0, slot=20, func=0
 	class=06-01-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found->	vendor=0x8086, dev=0x7111, revid=0x01
 	domain=0, bus=0, slot=20, func=1
 	class=01-01-80, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	map[20]: type I/O Port, range 32, base 0xf100, size  4, enabled
 found->	vendor=0x8086, dev=0x7112, revid=0x01
 	domain=0, bus=0, slot=20, func=2
 	class=0c-03-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=d, irq=255
 	map[20]: type I/O Port, range 32, base 0, size  5, port disabled
 found->	vendor=0x8086, dev=0x7113, revid=0x02
 	domain=0, bus=0, slot=20, func=3
 	class=06-80-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	map[90]: type I/O Port, range 32, base 0xf040, size  4, port disabled
 sym0: <875> port 0x2000-0x20ff mem 0xc6ffcf00-0xc6ffcfff,0xc6fff000-0xc6ffffff irq 10 at device 6.0 on pci0
 sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0xc6ffcf00
 sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xc6fff000
 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
 sym0: open drain IRQ line driver, using on-chip SRAM
 sym0: using LOAD/STORE-based firmware.
 sym0: [MPSAFE]
 sym0: [ITHREAD]
 sym1: <875> port 0x2400-0x24ff mem 0xc6ffce00-0xc6ffceff,0xc6ffe000-0xc6ffefff irq 11 at device 6.1 on pci0
 sym1: Reserved 0x100 bytes for rid 0x14 type 3 at 0xc6ffce00
 sym1: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xc6ffe000
 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
 sym1: open drain IRQ line driver, using on-chip SRAM
 sym1: using LOAD/STORE-based firmware.
 sym1: [MPSAFE]
 sym1: [ITHREAD]
 tl0: <Compaq Netelligent 10/100 Proliant> port 0x2c80-0x2c8f mem 0xc6ffcc70-0xc6ffcc7f irq 15 at device 7.0 on pci0
 tl0: Reserved 0x10 bytes for rid 0x10 type 4 at 0x2c80
 miibus0: <MII bus> on tl0
 lxtphy0: <LXT970 10/100 media interface> PHY 1 on miibus0
 lxtphy0:  100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 tlphy0: <ThunderLAN 10baseT media interface> PHY 31 on miibus0
 tlphy0:  10base2/BNC, 10base5/AUI
 tl0: WARNING: using obsoleted if_watchdog interface
 tl0: bpf attached
 tl0: Ethernet address: 00:50:8b:dc:8a:75
 tl0: [MPSAFE]
 tl0: [ITHREAD]
 vgapci0: <VGA-compatible display> port 0x2800-0x28ff mem 0xc5000000-0xc5ffffff,0xc6ffd000-0xc6ffdfff at device 8.0 on pci0
 pci0: <base peripheral> at device 9.0 (no driver attached)
 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x2c00-0x2c7f mem 0xc6ffcc80-0xc6ffccff irq 5 at device 16.0 on pci0
 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xc6ffcc80
 xl0: using memory mapped I/O
 xl0: media options word: a
 xl0: found MII/AUTO
 miibus1: <MII bus> on xl0
 xlphy0: <3Com internal media interface> PHY 24 on miibus1
 xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 xl0: bpf attached
 xl0: Ethernet address: 00:10:4b:11:b4:db
 xl0: [MPSAFE]
 xl0: [ITHREAD]
 isab0: <PCI-ISA bridge> at device 20.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf100-0xf10f at device 20.1 on pci0
 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf100
 ata0: <ATA channel 0> on atapci0
 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
 ata0: reset tp1 mask=03 ostat0=50 ostat1=01
 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
 ata0: stat1=0x01 err=0x04 lsb=0x14 msb=0xeb
 ata0: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
 ata0: [MPSAFE]
 ata0: [ITHREAD]
 ata1: <ATA channel 1> on atapci0
 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
 ata1: [MPSAFE]
 ata1: [ITHREAD]
 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 20.2 on pci0
 uhci0: Lazy allocation of 0x20 bytes rid 0x20 type 4 at 0x1000
 uhci0: Could not allocate irq
 device_attach: uhci0 attach returned 6
 piix0: <PIIX Timecounter> port 0xf040-0xf04f at device 20.3 on pci0
 Timecounter "PIIX" frequency 3579545 Hz quality 0
 cpu0 on motherboard
 eisa0: <EISA bus> on motherboard
 mainboard0: <CPQ0679 (System Board)> at slot 0 on eisa0
 eisa0: @X@0000 (0x03000000) at slot 2 (no driver attached)
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed 0
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 unknown: status reg test failed ff
 ahc_isa_probe 2: ioport 0x2c00 alloc failed
 ex_isa_identify()
 ata: ata0 already exists; skipping it
 ata: ata1 already exists; skipping it
 pnp_identify: Trying Read_Port at 203
 pnp_identify: Trying Read_Port at 243
 pnp_identify: Trying Read_Port at 283
 pnp_identify: Trying Read_Port at 2c3
 pnp_identify: Trying Read_Port at 303
 pnp_identify: Trying Read_Port at 343
 pnp_identify: Trying Read_Port at 383
 pnp_identify: Trying Read_Port at 3c3
 PNP Identify complete
 sc: sc0 already exists; skipping it
 vga: vga0 already exists; skipping it
 isa_probe_children: disabling PnP devices
 isa_probe_children: probing non-PnP devices
 pmtimer0 on isa0
 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xedfff,0xee000-0xeffff pnpid ORM0000 on isa0
 adv0: not probed (disabled)
 aha0: not probed (disabled)
 aic0: not probed (disabled)
 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 atkbd: the current kbd controller command byte 0065
 
 --BOKacYhQ+x31HxR3
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: attachment; filename="7.0-dmesg"
 Content-Transfer-Encoding: quoted-printable
 
 KDB: debugger backends: ddb
 KDB: current backend: ddb
 Copyright (c) 1992-2008 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 7.0-STABLE #1: Wed Jul  2 06:56:36 EST 2008
     root@:/var/obj/usr/src/sys/wansim
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Pentium III/Pentium III Xeon/Celeron (598.19-MHz 686-class CPU)
   Origin =3D "GenuineIntel"  Id =3D 0x673  Stepping =3D 3
   Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
 CMOV,PAT,PSE36,MMX,FXSR,SSE>
 real memory  =3D 134201344 (127 MB)
 avail memory =3D 121823232 (116 MB)
 cpu0 on motherboard
 pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> pcibus 0 on mother=
 board
 pci0: <PCI bus> on pcib0
 sym0: <875> port 0x2000-0x20ff mem 0xc6ffcf00-0xc6ffcfff,0xc6fff000-0xc6fff=
 fff irq 10 at device 6.0 on pci0
 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
 sym0: [ITHREAD]
 sym1: <875> port 0x2400-0x24ff mem 0xc6ffce00-0xc6ffceff,0xc6ffe000-0xc6ffe=
 fff irq 11 at device 6.1 on pci0
 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
 sym1: [ITHREAD]
 tl0: <Compaq Netelligent 10/100 Proliant> port 0x2c80-0x2c8f mem 0xc6ffcc70=
 -0xc6ffcc7f irq 15 at device 7.0 on pci0
 miibus0: <MII bus> on tl0
 lxtphy0: <LXT970 10/100 media interface> PHY 1 on miibus0
 lxtphy0:  100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100bas=
 eTX-FDX, auto
 tlphy0: <ThunderLAN 10baseT media interface> PHY 31 on miibus0
 tlphy0:  10base2/BNC, 10base5/AUI
 tl0: using obsoleted if_watchdog interface
 tl0: Ethernet address: 00:50:8b:dc:8a:75
 tl0: [ITHREAD]
 vgapci0: <VGA-compatible display> port 0x2800-0x28ff mem 0xc5000000-0xc5fff=
 fff,0xc6ffd000-0xc6ffdfff at device 8.0 on pci0
 pci0: <base peripheral> at device 9.0 (no driver attached)
 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x2c00-0x2c7f mem 0xc6ffcc80-0=
 xc6ffccff irq 5 at device 16.0 on pci0
 miibus1: <MII bus> on xl0
 xlphy0: <3Com internal media interface> PHY 24 on miibus1
 xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 xl0: Ethernet address: 00:10:4b:11:b4:db
 xl0: [ITHREAD]
 isab0: <PCI-ISA bridge> at device 20.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177=
 ,0x376,0xf100-0xf10f at device 20.1 on pci0
 ata0: <ATA channel 0> on atapci0
 ata0: [ITHREAD]
 ata1: <ATA channel 1> on atapci0
 ata1: [ITHREAD]
 pci0: <serial bus, USB> at device 20.2 (no driver attached)
 pci0: <bridge> at device 20.3 (no driver attached)
 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xedfff,0xee000-0x=
 effff pnpid ORM0000 on isa0
 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on=
  isa0
 fdc0: [FILTER]
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
 ppbus0: <Parallel port bus> on ppc0
 ppbus0: [ITHREAD]
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 ppc0: [GIANT-LOCKED]
 ppc0: [ITHREAD]
 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
 sio0: type 16550A, console
 sio0: [FILTER]
 sio1 at port 0x2f8-0x2ff irq 3 on isa0
 sio1: type 16550A
 sio1: [FILTER]
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 Timecounter "TSC" frequency 598185543 Hz quality 800
 Timecounters tick every 1.000 msec
 ipfw2 initialized, divert enabled, nat loadable, rule-based forwarding disa=
 bled, default to accept, logging limited to 100 packets/entry by default
 Waiting 2 seconds for SCSI devices to settle
 acd0: CDROM <CD-224E/9.0B> at ata0-master PIO4
 da0 at sym0 bus 0 target 0 lun 0
 da0: <COMPAQ BB00911CA0 3B07> Fixed Direct Access SCSI-2 device=20
 da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
 da0: Command Queueing Enabled
 da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
 sa0 at sym1 bus 0 target 5 lun 0
 sa0: <DEC TZ89     (C) DEC 2150> Removable Sequential Access SCSI-2 device=
 =20
 sa0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit)
 Trying to mount root from ufs:/dev/da0s1a
 
 --BOKacYhQ+x31HxR3
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: attachment; filename=pciconf
 
 aalp03# pciconf -lv
 hostb0@pci0:0:0:0:      class=0x060000 card=0x00000000 chip=0x71928086 rev=0x03 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Not Implemented)'
     class      = bridge
     subclass   = HOST-PCI
 sym0@pci0:0:6:0:        class=0x010000 card=0x70040e11 chip=0x000f1000 rev=0x14 hdr=0x00
     vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
     device     = 'LSI53C875/E,LSI53C876/E PCI to Ultra SCSI I/O Processor'
     class      = mass storage
     subclass   = SCSI
 sym1@pci0:0:6:1:        class=0x010000 card=0x70040e11 chip=0x000f1000 rev=0x14 hdr=0x00
     vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
     device     = 'LSI53C875/E,LSI53C876/E PCI to Ultra SCSI I/O Processor'
     class      = mass storage
     subclass   = SCSI
 tl0@pci0:0:7:0: class=0x028000 card=0x00000000 chip=0xae430e11 rev=0x10 hdr=0x00
     vendor     = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
     device     = 'Integrated Netelligent 10/100 TX PCI TLAN 2.3'
     class      = network
 vgapci0@pci0:0:8:0:     class=0x030000 card=0x47561002 chip=0x47561002 rev=0x7a hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'Rage 3D IIC PCI [Mach64 GT IIC] (PQFP Package)'
     class      = display
     subclass   = VGA
 none0@pci0:0:9:0:       class=0x088000 card=0xf3b0110e chip=0xa0f00e11 rev=0x00 hdr=0x00
     vendor     = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
     device     = 'Advanced System Management Controller'
     class      = base peripheral
 xl0@pci0:0:16:0:        class=0x020000 card=0x905510b7 chip=0x905510b7 rev=0x24 hdr=0x00
     vendor     = '3COM Corp, Networking Division'
     device     = '3C905-TX Fast Etherlink 10/100 PCI TX NIC'
     class      = network
     subclass   = ethernet
 isab0@pci0:0:20:0:      class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
     class      = bridge
     subclass   = PCI-ISA
 atapci0@pci0:0:20:1:    class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
     class      = mass storage
     subclass   = ATA
 none1@pci0:0:20:2:      class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
     class      = serial bus
     subclass   = USB
 none2@pci0:0:20:3:      class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
     class      = bridge
 
 --BOKacYhQ+x31HxR3--
 
 --3uo+9/B/ebqu+fSQ
 Content-Type: application/pgp-signature
 Content-Disposition: inline
 
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.13 (FreeBSD)
 
 iEYEARECAAYFAktOgfAACgkQ/opHv/APuIdqHwCgppFbjQQS6dLGM8RUGKSyAoCR
 2MkAn2RRR39URednag8RdTV2G3U5wlcG
 =3XzY
 -----END PGP SIGNATURE-----
 
 --3uo+9/B/ebqu+fSQ--
State-Changed-From-To: closed->open 
State-Changed-By: gavin 
State-Changed-When: Thu Jan 14 11:53:50 UTC 2010 
State-Changed-Why:  
Reopen, we have confirmation that this is still a problem. 

http://www.freebsd.org/cgi/query-pr.cgi?pr=93787 
>Unformatted:
