From aleksey.ovcharenko@gmail.com  Wed Dec  7 08:46:02 2005
Return-Path: <aleksey.ovcharenko@gmail.com>
Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
	by hub.freebsd.org (Postfix) with ESMTP id CC37C16A41F
	for <FreeBSD-gnats-submit@freebsd.org>; Wed,  7 Dec 2005 08:46:02 +0000 (GMT)
	(envelope-from aleksey.ovcharenko@gmail.com)
Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.203])
	by mx1.FreeBSD.org (Postfix) with ESMTP id 52C7143D6D
	for <FreeBSD-gnats-submit@freebsd.org>; Wed,  7 Dec 2005 08:46:02 +0000 (GMT)
	(envelope-from aleksey.ovcharenko@gmail.com)
Received: by wproxy.gmail.com with SMTP id i31so299949wra
        for <FreeBSD-gnats-submit@freebsd.org>; Wed, 07 Dec 2005 00:46:01 -0800 (PST)
Received: by 10.54.144.3 with SMTP id r3mr914985wrd;
        Wed, 07 Dec 2005 00:46:01 -0800 (PST)
Received: by 10.54.141.17 with HTTP; Wed, 7 Dec 2005 00:46:01 -0800 (PST)
Message-Id: <54d47ab30512070046x63aa2b0aw@mail.gmail.com>
Date: Wed, 7 Dec 2005 10:46:01 +0200
From: Aleksey Ovcharenko <aleksey.ovcharenko@gmail.com>
To: FreeBSD-gnats-submit@freebsd.org
Subject: panic in 2 mins after power on PC

>Number:         90059
>Category:       i386
>Synopsis:       panic in 2 mins after power on PC
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    gavin
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Wed Dec 07 08:50:01 GMT 2005
>Closed-Date:    Wed Feb 06 18:06:24 UTC 2008
>Last-Modified:  Wed Feb 06 18:06:24 UTC 2008
>Originator:     Aleksey Ovcharenko
>Release:        FreeBSD 6.0-STABLE i386
>Organization:
>Environment:
System: FreeBSD ice.uaoffice.etadirect.net 6.0-STABLE FreeBSD 6.0-STABLE #0:
Mon Dec 5 12:24:38 EET 2005
root@ice.uaoffice.etadirect.net:/usr/obj/usr/src/sys/TOA
i386



>Description:
After every power on PC it crashes in 2 minutes with following error:

Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0x88
fault code              = supervisor read, page not present
instruction pointer     = 0x20:0xc355edbf
stack pointer           = 0x28:0xd5232c6c
frame pointer           = 0x28:0xd5232c74
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 36 (swi4: clock sio)
panic: from debugger
Uptime: 2m3s

It does not happen until PC power off and on. So, PC works stable until next
power on.

Here comes dmesg output:

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #0: Mon Dec  5 12:24:38 EET 2005
    root@ice.uaoffice.etadirect.net:/usr/obj/usr/src/sys/TOA
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193225 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.66GHz (2660.91-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x451d<SSE3,RSVD2,MON,DS_CPL,TM2,CNTX-ID,<b14>>
real memory  = 528154624 (503 MB)
avail memory = 507486208 (483 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
netsmb_dev: loaded
acpi0: <A M I OEMRSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xd880-0xd89f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xd800-0xd81f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xd480-0xd49f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xd400-0xd41f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfea3bc00-0xfea3bfff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 22 at device 10.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:13:8f:12:53:63
pcm0: <Intel ICH6 (82801FB)> port 0xd000-0xd0ff,0xcc00-0xcc3f mem 0xfea3b800-0xfea3b9ff,0xfea3b400-0xfea3b4ff irq 17 at device 30.2 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC850 AC97 Codec>
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH6 SATA150 controller> port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f irq 19 at device 31.2 on pci0
atapci1: failed to enable memory mapping!
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ichsmb0: <SMBus controller> port 0x400-0x41f irq 19 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
acpi_button0: <Power Button> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: Samsung Electronics Sam Sung Electronics, rev 1.10/2.00, addr 2
Timecounter "TSC" frequency 2660906600 Hz quality 800
Timecounters tick every 1.000 msec
ad0: DMA limited to UDMA33, controller found non-ATA66 cable
ad0: 38146MB <WDC WD400BB-75JHC0 06.01C06> at ata0-master UDMA33
acd0: DMA limited to UDMA33, controller found non-ATA66 cable
acd0: DVDROM <ASUS DVD-E616P3/1.05> at ata0-slave UDMA33
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted

>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
Responsible-Changed-From-To: gnats-admin->freebsd-i386 
Responsible-Changed-By: linimon 
Responsible-Changed-When: Thu Dec 8 02:03:55 GMT 2005 
Responsible-Changed-Why:  
Rescue this PR from the 'pending' category. 

http://www.freebsd.org/cgi/query-pr.cgi?pr=90059 
State-Changed-From-To: open->feedback 
State-Changed-By: gavin 
State-Changed-When: Sun Jan 27 15:21:49 UTC 2008 
State-Changed-Why:  
To submitter:  Do you still have this problem with more recent 
versions of FreeBSD? 


Responsible-Changed-From-To: freebsd-i386->gavin 
Responsible-Changed-By: gavin 
Responsible-Changed-When: Sun Jan 27 15:21:49 UTC 2008 
Responsible-Changed-Why:  
Track 

http://www.freebsd.org/cgi/query-pr.cgi?pr=90059 
State-Changed-From-To: feedback->closed 
State-Changed-By: gavin 
State-Changed-When: Wed Feb 6 18:05:28 UTC 2008 
State-Changed-Why:  
Submitter can no longer reproduce this after hardware was replaced 

http://www.freebsd.org/cgi/query-pr.cgi?pr=90059 
>Unformatted:
