From ijliao@Terry.Dorm10.NCTU.edu.tw  Tue Dec  1 08:25:18 1998
Received: from Terry.Dorm10.NCTU.edu.tw (Terry.Dorm10.NCTU.edu.tw [140.113.122.99])
          by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id IAA13880
          for <FreeBSD-gnats-submit@freebsd.org>; Tue, 1 Dec 1998 08:25:15 -0800 (PST)
          (envelope-from ijliao@Terry.Dorm10.NCTU.edu.tw)
Received: (from ijliao@localhost)
	by Terry.Dorm10.NCTU.edu.tw (8.9.1/8.9.1) id AAA03673;
	Wed, 2 Dec 1998 00:24:48 +0800 (CST)
Message-Id: <199812011624.AAA03673@Terry.Dorm10.NCTU.edu.tw>
Date: Wed, 2 Dec 1998 00:24:48 +0800 (CST)
From: "Q@~WRǥ" <ijliao@Terry.Dorm10.NCTU.edu.tw>
Reply-To: ijliao@Terry.Dorm10.NCTU.edu.tw
To: FreeBSD-gnats-submit@freebsd.org
Subject: can't detect wdc1
X-Send-Pr-Version: 3.2

>Number:         8922
>Category:       i386
>Synopsis:       can't detect wdc1 on Abit LX6 motherboard
>Confidential:   no
>Severity:       critical
>Priority:       medium
>Responsible:    n_hibma
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Dec  1 08:30:00 PST 1998
>Closed-Date:    Tue Jul 20 05:18:01 PDT 1999
>Last-Modified:  Tue Jul 20 05:40:00 PDT 1999
>Originator:     Q@~WRǥ
>Release:        FreeBSD 3.0-CURRENT i386
>Organization:
@~qdj
>Environment:

FreeBSD Terry.Dorm10.NCTU.edu.tw 3.0-CURRENT FreeBSD 3.0-CURRENT #0: Tue Dec  1
18:00:57 CST 1998     root@Terry.Dorm10.NCTU.edu.tw:/usr/src/sys/compile/TERRY
i386

>Description:

I put a cdrom on slave of secondary ide, and it's ok under dos & windows.
But when i switch to FreeeBSD, on bootup it can't detect my wdc1.
my kernel config :
controller      wdc1    at isa? port "IO_WD2" bio irq 15
options         ATAPI           #Enable ATAPI support for IDE bus
options         ATAPI_STATIC    #Don't do it as an LKM
device          wcd0            #IDE CD-ROM

>How-To-Repeat:

Install 3.0, then the problem occur.

>Fix:
>Release-Note:
>Audit-Trail:
Responsible-Changed-From-To: freebsd-bugs->n_hibma 
Responsible-Changed-By: n_hibma 
Responsible-Changed-When: Tue Jul 20 03:22:25 PDT 1999 
Responsible-Changed-Why:  
Remind me of taking care of this PR if sos doesn't. 
State-Changed-From-To: open->closed 
State-Changed-By: sos 
State-Changed-When: Tue Jul 20 05:18:01 PDT 1999 
State-Changed-Why:  
This is fixed in 4.0-current using the ata driver instead, the old wd driver 
is not probing correctly. 

From: Nick Hibma <nick.hibma@jrc.it>
To: freebsd-gnats-submit@freebsd.org, ijliao@Terry.Dorm10.NCTU.edu.tw
Cc:  
Subject: Re: i386/8922: can't detect wdc1 on Abit LX6 motherboard
Date: Tue, 20 Jul 1999 14:30:03 +0200

 In case he has not sent you a more explanatory e-mail along with the
 closing of the PR:
 
 With 'not probing correctly' he means: CD-ROM as the secondary drive,
 without a master drive present on the same channel is not supported in
 the old ATA driver. Either configure the CD ROM  to be master on that
 channel or move it to the same channel as your IDE driver but then as
 secondary (the IDE drive being master).
 
 Hope this helps. Feel free to ask more questions if needed.
 
 Nick
 -- 
 ISIS/STA, T.P.270, Joint Research Centre, 21020 Ispra, Italy
 
>Unformatted:
