From nobody@FreeBSD.org  Thu Apr 20 19:20:24 2000
Return-Path: <nobody@FreeBSD.org>
Received: from freefall.freebsd.org (freefall.FreeBSD.ORG [204.216.27.21])
	by hub.freebsd.org (Postfix) with ESMTP id 6EFB637B8CB
	for <freebsd-gnats-submit@FreeBSD.org>; Thu, 20 Apr 2000 19:20:24 -0700 (PDT)
	(envelope-from nobody@FreeBSD.org)
Received: (from nobody@localhost)
	by freefall.freebsd.org (8.9.3/8.9.2) id TAA09945;
	Thu, 20 Apr 2000 19:20:23 -0700 (PDT)
	(envelope-from nobody@FreeBSD.org)
Message-Id: <200004210220.TAA09945@freefall.freebsd.org>
Date: Thu, 20 Apr 2000 19:20:23 -0700 (PDT)
From: claus@b5.nu
Sender: nobody@FreeBSD.org
To: freebsd-gnats-submit@FreeBSD.org
Subject: 4.0-RELEASE crashes during boot from CD-ROM
X-Send-Pr-Version: www-1.0

>Number:         18123
>Category:       i386
>Synopsis:       4.0-RELEASE crashes during boot from CD-ROM
>Confidential:   no
>Severity:       critical
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Thu Apr 20 19:30:00 PDT 2000
>Closed-Date:    Wed May 30 01:19:10 PDT 2001
>Last-Modified:  Wed May 30 01:21:07 PDT 2001
>Originator:     Claus Endres
>Release:        4.0-RELEASE
>Organization:
>Environment:
Released kernel off CD-ROM 1
>Description:
Trying to boot off CD-ROM 1 in order to install 4.0. CPU halt after
pci0:<NVidia/SGS-Thomson Riva128 Graphics acelerator> at 8.0 irq 9.

Shouldn't that line above read: vga0:...  ???

The system is running FreeBSD 3.3 (and a few other M$ OSes) fine.

The 3.3 probe results are:
Apr 21 11:54:36 ganymede /kernel: avail memory = 62234624 (60776K bytes)
Apr 21 11:54:36 ganymede /kernel: Preloaded elf kernel "kernel" at 0xc02e5000.
Apr 21 11:54:36 ganymede /kernel: Preloaded userconfig_script "/boot/kernel.conf" at 0xc02e509c.
Apr 21 11:54:36 ganymede /kernel: Pentium Pro MTRR support enabled
Apr 21 11:54:36 ganymede /kernel: Probing for devices on PCI bus 0:
Apr 21 11:54:36 ganymede /kernel: chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
Apr 21 11:54:36 ganymede /kernel: chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
Apr 21 11:54:36 ganymede /kernel: ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
Apr 21 11:54:36 ganymede /kernel: vga0: <VGA-compatible display device> rev 0x10 int a irq 9 on pci0.8.0
Apr 21 11:54:36 ganymede /kernel: Probing for PnP devices:
Apr 21 11:54:36 ganymede /kernel: Probing for devices on the ISA bus:
Apr 21 11:54:36 ganymede /kernel: sc0 on isa
Apr 21 11:54:36 ganymede /kernel: sc0: VGA color <16 virtual consoles, flags=0x0>
Apr 21 11:54:36 ganymede /kernel: ed0 at 0x300-0x31f irq 10 on isa
Apr 21 11:54:36 ganymede /kernel: ed0: address 00:00:44:01:93:2a, type NE2000 (16 bit)
Apr 21 11:54:36 ganymede /kernel: atkbdc0 at 0x60-0x6f on motherboard
Apr 21 11:54:36 ganymede /kernel: atkbd0 irq 1 on isa
Apr 21 11:54:36 ganymede /kernel: sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
Apr 21 11:54:36 ganymede /kernel: sio0: type 16550A
Apr 21 11:54:36 ganymede /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa
Apr 21 11:54:36 ganymede /kernel: sio1: type 16550A
Apr 21 11:54:36 ganymede /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
Apr 21 11:54:36 ganymede /kernel: fdc0: FIFO enabled, 8 bytes threshold
Apr 21 11:54:36 ganymede /kernel: fd0: 1.44MB 3.5in
Apr 21 11:54:36 ganymede /kernel: wdc0 at 0x1f0-0x1f7 irq 14 on isa
Apr 21 11:54:36 ganymede /kernel: wdc0: unit 0 (wd0): <FUJITSU MPB3064ATU E>
Apr 21 11:54:36 ganymede /kernel: wd0: 6187MB (12672450 sectors), 13410 cyls, 15 heads, 63 S/T, 512 B/S
Apr 21 11:54:36 ganymede /kernel: wdc1 at 0x170-0x177 irq 15 on isa
Apr 21 11:54:36 ganymede /kernel: wdc1: unit 1 (atapi): <MATSHITA CR-587/7R16>, removable, accel, dma, iordis
Apr 21 11:54:36 ganymede /kernel: acd0: drive speed 4125KB/sec, 128KB cache
Apr 21 11:54:36 ganymede /kernel: acd0: supported read types: CD-R, CD-RW, CD-DA
Apr 21 11:54:36 ganymede /kernel: acd0: Audio: play, 256 volume levels
Apr 21 11:54:36 ganymede /kernel: acd0: Mechanism: ejectable tray
Apr 21 11:54:36 ganymede /kernel: acd0: Medium: no/blank disc inside, unlocked
Apr 21 11:54:36 ganymede /kernel: ppc0 at 0x378 irq 7 flags 0x40 on isa
Apr 21 11:54:36 ganymede /kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
Apr 21 11:54:36 ganymede /kernel: lpt0: <generic printer> on ppbus 0
Apr 21 11:54:36 ganymede /kernel: lpt0: Interrupt-driven port
Apr 21 11:54:36 ganymede /kernel: ppi0: <generic parallel i/o> on ppbus 0
Apr 21 11:54:36 ganymede /kernel: plip0: <PLIP network interface> on ppbus 0
Apr 21 11:54:36 ganymede /kernel: aha0 at 0x334-0x337 irq 11 drq 5 on isa
Apr 21 11:54:36 ganymede /kernel: aha0: AHA-1542CF FW Rev. B.0 (ID=45) SCSI Host Adapter, SCSI ID 0, 16 CCBs
Apr 21 11:54:36 ganymede /kernel: vga0 at 0x3c0-0x3df maddr 0xa0000 msize 131072 on isa
Apr 21 11:54:36 ganymede /kernel: npx0 on motherboard
Apr 21 11:54:36 ganymede /kernel: npx0: INT 16 interface
Apr 21 11:54:36 ganymede /kernel: IPsec: Initialized Security Association Processing.
Apr 21 11:54:36 ganymede /kernel: Waiting 15 seconds for SCSI devices to settle
Apr 21 11:54:36 ganymede /kernel: sa0 at aha0 bus 0 target 4 lun 0
Apr 21 11:54:36 ganymede /kernel: sa0: <CONNER CTT8000-S 1.17> Removable Sequential Access SCSI-2 device
Apr 21 11:54:36 ganymede /kernel: sa0: 5.000MB/s transfers (5.000MHz, offset 8)
Apr 21 11:54:36 ganymede /kernel: changing root device to wd0s3a
Apr 21 11:54:36 ganymede /kernel: cd0 at aha0 bus 0 target 3 lun 0
Apr 21 11:54:36 ganymede /kernel: cd0: <YAMAHA CRW6416S 1.0c> Removable CD-ROM SCSI-2 device
Apr 21 11:54:36 ganymede /kernel: cd0: 10.000MB/s transfers (10.000MHz, offset 8)
Apr 21 11:54:36 ganymede /kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed




>How-To-Repeat:
Boot off 4.0-RELEASE CD-ROM 1
>Fix:


>Release-Note:
>Audit-Trail:

From: Wilko Bulte <wkb@chello.nl>
To: freebsd-gnats-submit@FreeBSD.org, claus@b5.nu
Cc:  
Subject: Re: i386/18123: 4.0-RELEASE crashes during boot from CD-ROM
Date: Tue, 13 Jun 2000 23:32:06 +0200

 Does it also happen with another VGA adapter?
 
 -- 
 Wilko Bulte  	 	http://www.freebsd.org  "Do, or do not. There is no try"
 wilko@freebsd.org	http://www.nlfug.nl	- Yoda - The Empire Strikes Back
 

From: Wilko Bulte <wkb@chello.nl>
To: freebsd-gnats-submit@FreeBSD.org, claus@b5.nu
Cc:  
Subject: Re: i386/18123: 4.0-RELEASE crashes during boot from CD-ROM
Date: Thu, 15 Jun 2000 20:07:55 +0200

 Received feedback from Claus, putting it in gnats for further reference.
 
 Wilko
 --------
 
 
 Date: Thu, 15 Jun 2000 14:39:09 +1000
 From: Claus Endres <claus@b5.nu>
 Subject: Re: i386/18123: 4.0-RELEASE crashes during boot from CD-ROM
 To: wc.bulte@chello.nl
 
 [-- Attachment #1 --]
 [-- Type: text/plain, Encoding: 7bit, Size: 1.4K --]
      
 Modifying the config file, I found that the original reported problem is
 caused
 +by the
 ex ethernet driver. If I comment out the line
      
 device    ex
      
 the kernel will proceed to boot until it prints the message:
      
 isa_compat: didn't get ports for le
      
 at which point it will hang again. Removing the additional line
      
 device     le0    at isa? port 0x300 irq 5 iomem 0xd0000
 
 will allow the boot to complete. Note that I have modified the ed0 to
 use port
 +0x300.
 
 The attached config file shows the maximum configuration that is able to
 boot
 +(with
 both ex and le drivers removed).
 
 Hope this helps to solve the problem.
 
 The more general problem is that the boot configuration editor doesn't
 allow to
 delete devices like the "ex" any more.
     
 Regards,
 Claus.
 
 Wilko Bulte wrote:
  
 > On Wed, Jun 14, 2000 at 10:47:16AM +1000, Claus Endres wrote:
 >
 > >
 > > Do you want me to do a binary tree elimination (adding back half the unused
 +devices
 > > at a time) to
 > > determine which device driver causes the problem?
 >
 > I think it might be a good idea to try to find out what exactly causes the
 > problem. If we know that we can send the problem to the right source
 > maintainer (at least that is the theory ;-).
 >
 > So if you have time to investigate I'd say it might be worth it.
 >
 > cheers,
 > --
 > Wilko Bulte             http://www.freebsd.org  "Do, or do not. There is no
 +try"
 > wilko@freebsd.org     
 
 [-- Attachment #2: TEST200 --]
 [-- Type: text/plain, Encoding: 7bit, Size: 7.9K --]
 
 #
 # GENERIC -- Generic kernel configuration file for FreeBSD/i386
 #
 # For more information on this file, please read the handbook section on
 # Kernel Configuration Files:
 #
 #    http://www.freebsd.org/handbook/kernelconfig-config.html
 #
 # The handbook is also available locally in /usr/share/doc/handbook
 # if you've installed the doc distribution, otherwise always see the
 # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
 # latest information.
 #
 # An exhaustive list of options and more detailed explanations of the
 # device lines is also present in the ./LINT configuration file. If you
 are
 # in doubt as to the purpose or necessity of a line, check first in
 LINT.
 #
 # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246 2000/03/09 16:32:55 jlemon
 Exp $
 
 machine         i386
 cpu             I386_CPU
 cpu             I486_CPU
 cpu             I586_CPU
 cpu             I686_CPU
 ident           TEST200
 maxusers        32
 
 #makeoptions    DEBUG=-g                #Build kernel with gdb(1) debug
 symbols
 
 options         MATH_EMULATE            #Support for x87 emulation
 options         INET                    #InterNETworking
 options         INET6                   #IPv6 communications protocols
 options         FFS                     #Berkeley Fast Filesystem
 options         FFS_ROOT                #FFS usable as root device [keep
 this!]
 options         MFS                     #Memory Filesystem
 options         MD_ROOT                 #MD is a potential root device
 options         NFS                     #Network Filesystem
 options         NFS_ROOT                #NFS usable as root device, NFS
 required
 options         MSDOSFS                 #MSDOS Filesystem
 options         CD9660                  #ISO 9660 Filesystem
 options         CD9660_ROOT             #CD-ROM usable as root, CD9660
 required
 options         PROCFS                  #Process filesystem
 options         COMPAT_43               #Compatible with BSD 4.3 [KEEP
 THIS!]
 options         SCSI_DELAY=15000        #Delay (in ms) before probing
 SCSI
 options         UCONSOLE                #Allow users to grab the console
 options         USERCONFIG              #boot -c editor
 options         VISUAL_USERCONFIG       #visual boot -c editor
 options         KTRACE                  #ktrace(1) support
 options         SYSVSHM                 #SYSV-style shared memory
 options         SYSVMSG                 #SYSV-style message queues
 options         SYSVSEM                 #SYSV-style semaphores
 options         P1003_1B                #Posix P1003_1B real-time
 extentions
 options         _KPOSIX_PRIORITY_SCHEDULING
 options         ICMP_BANDLIM            #Rate limit bad replies
 
 # To make an SMP kernel, the next two are needed
   
 #options        SMP                     # Symmetric MultiProcessor
 Kernel
 #options        APIC_IO                 # Symmetric (APIC) I/O
 # Optionally these may need tweaked, (defaults shown):
 #options        NCPU=2                  # number of CPUs
 #options        NBUS=4                  # number of busses
 #options        NAPIC=1                 # number of IO APICs
 #options        NINTR=24                # number of INTs
 
 device          isa
 device          eisa
 device          pci
 
 # Floppy drives
 device          fdc0    at isa? port IO_FD1 irq 6 drq 2
 device          fd0     at fdc0 drive 0
 device          fd1     at fdc0 drive 1
 
 # ATA and ATAPI devices
 device          ata0    at isa? port IO_WD1 irq 14
 device          ata1    at isa? port IO_WD2 irq 15
 device          ata
 device          atadisk                 # ATA disk drives
 device          atapicd                 # ATAPI CDROM drives
 device          atapifd                 # ATAPI floppy drives
 device          atapist                 # ATAPI tape drives
 options         ATA_STATIC_ID           #Static device numbering
 #options        ATA_ENABLE_ATAPI_DMA    #Enable DMA on ATAPI devices
 
 # SCSI Controllers
 device          ahb             # EISA AHA1742 family
 device          ahc             # AHA2940 and onboard AIC7xxx devices
 device          amd             # AMD 53C974 (Teckram DC-390(T))
 device          dpt             # DPT Smartcache - See LINT for options!
 device          isp             # Qlogic family
 device          ncr             # NCR/Symbios Logic
 device          sym             # NCR/Symbios Logic (newer chipsets)
 
 device          adv0    at isa?
 device          adw
 device          bt0     at isa?
 device          aha0    at isa?
 device          aic0    at isa?
 
 # SCSI peripherals
 device          scbus           # SCSI bus (required)
 device          da              # Direct Access (disks)
 device          sa              # Sequential Access (tape etc)
 device          cd              # CD
 device          pass            # Passthrough device (direct SCSI
 access)
 
 # RAID controllers
 device          ida             # Compaq Smart RAID
 device          amr             # AMI MegaRAID
 device          mlx             # Mylex DAC960 family
 
 # atkbdc0 controls both the keyboard and the PS/2 mouse
 device          atkbdc0 at isa? port IO_KBD
 device          atkbd0  at atkbdc? irq 1
 device          psm0    at atkbdc? irq 12
 device          vga0    at isa?
 
 # splash screen/screen saver
 pseudo-device   splash
 
 # syscons is the default console driver, resembling an SCO console
 device          sc0     at isa?
 
 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
 #device         vt0     at isa?
 options         XSERVER                 # support for X server on a vt
 console
 #options        FAT_CURSOR              # start with block cursor
 # If you have a ThinkPAD, uncomment this along with the rest of the PCVT
 lines
 #options        PCVT_SCANSET=2          # IBM keyboards are non-std
 
 # Floating point support - do not disable.
 device          npx0    at nexus? port IO_NPX irq 13
 
 # Power management support (see LINT for more options)
 device          apm0    at nexus? disable flags 0x20 # Advanced Power
 Management
 
 # PCCARD (PCMCIA) support
 device          card
 device          pcic0   at isa? irq 10 port 0x3e0 iomem 0xd0000
 device          pcic1   at isa? irq 11 port 0x3e2 iomem 0xd4000 disable
 
 # Serial (COM) ports
 device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
 device          sio1    at isa? port IO_COM2 irq 3
 device          sio2    at isa? disable port IO_COM3 irq 5
 device          sio3    at isa? disable port IO_COM4 irq 9
 
 # Parallel port
 device          ppc0    at isa? irq 7
 device          ppbus           # Parallel port bus (required)
 device          lpt             # Printer
 device          plip            # TCP/IP over parallel
 device          ppi             # Parallel port interface device
 #device         vpo             # Requires scbus and da
 
 
 # PCI Ethernet NICs.
 device          de              # DEC/Intel DC21x4x (``Tulip'')
 device          fxp             # Intel EtherExpress PRO/100B (82557,
 82558)
 device          tx              # SMC 9432TX (83c170 ``EPIC'')
 device          vx              # 3Com 3c590, 3c595 (``Vortex'')
 device          wx              # Intel Gigabit Ethernet Card
 (``Wiseman'')
 
 # PCI Ethernet NICs that use the common MII bus controller code.
 device          miibus          # MII bus support
 device          dc              # DEC/Intel 21143 and various workalikes
 device          rl              # RealTek 8129/8139
 device          sf              # Adaptec AIC-6915 (``Starfire'')
 device          sis             # Silicon Integrated Systems SiS 900/SiS
 7016
 device          ste             # Sundance ST201 (D-Link DFE-550TX)
 device          tl              # Texas Instruments ThunderLAN
 device          vr              # VIA Rhine, Rhine II
 device          wb              # Winbond W89C840F
 device          xl              # 3Com 3c90x (``Boomerang'',
 ``Cyclone'')
 
 # ISA Ethernet NICs.
 device          ed0     at isa? port 0x300 irq 10 iomem 0xd8000
 #device         ex
 device          ep
 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
 # exists only as a PCMCIA device, so there is no ISA attatement needed
 # and resources will always be dynamically assigned by the pccard code.
 device          wi
 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below
 will
 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
 # mode (the factory default). If you set the switches on your ISA
 # card for a manually chosen I/O address and IRQ, you must specify
 # those paremeters here.
 device          an
 # The probe order of these is presently determined by
 i386/isa/isa_compat.c.
 device          ie0     at isa? port 0x300 irq 10 iomem 0xd0000
 device          fe0     at isa? port 0x300
 #device         le0     at isa? port 0x300 irq 5 iomem 0xd0000
 device          lnc0    at isa? port 0x280 irq 10 drq 0
 device          cs0     at isa? port 0x300
 device          sn0     at isa? port 0x300 irq 10
 # requires PCCARD (PCMCIA) support to be activated
 #device         xe0     at isa?
 
 # Pseudo devices - the number indicates how many units to allocated.
 pseudo-device   loop            # Network loopback
 pseudo-device   ether           # Ethernet support
 pseudo-device   sl      1       # Kernel SLIP
 pseudo-device   ppp     1       # Kernel PPP
 pseudo-device   tun             # Packet tunnel.
 pseudo-device   pty             # Pseudo-ttys (telnet etc)
 pseudo-device   md              # Memory "disks"
 pseudo-device   gif     4       # IPv6 and IPv4 tunneling
 #pseudo-device  faith   1       # IPv6-to-IPv4 relaying (translation)
 
 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
 # Be aware of the administrative consequences of enabling this!
 pseudo-device   bpf             #Berkeley packet filter
 
 # USB support
 #device         uhci            # UHCI PCI->USB interface
 #device         ohci            # OHCI PCI->USB interface
 #device         usb             # USB Bus (required)
 #device         ugen            # Generic
 #device         uhid            # "Human Interface Devices"
 #device         ukbd            # Keyboard
 #device         ulpt            # Printer
 #device         umass           # Disks/Mass storage - Requires scbus
 and da
 #device         ums             # Mouse
 # USB Ethernet, requires mii
 #device         aue             # ADMtek USB ethernet
 #device         cue             # CATC USB ethernet
 #device         kue             # Kawasaki LSI USB ethernet
 
State-Changed-From-To: open->closed 
State-Changed-By: sos 
State-Changed-When: Wed May 30 01:19:10 PDT 2001 
State-Changed-Why:  
I think this has been fixed in 4.3 

http://www.FreeBSD.org/cgi/query-pr.cgi?pr=18123 
>Unformatted:
