From nobody@FreeBSD.ORG Thu Dec  2 14:59:35 1999
Return-Path: <nobody@FreeBSD.ORG>
Received: by hub.freebsd.org (Postfix, from userid 32767)
	id 00F7E14C5A; Thu,  2 Dec 1999 14:59:34 -0800 (PST)
Message-Id: <19991202225934.00F7E14C5A@hub.freebsd.org>
Date: Thu,  2 Dec 1999 14:59:34 -0800 (PST)
From: bleez@netaxs.com
Sender: nobody@FreeBSD.ORG
To: freebsd-gnats-submit@freebsd.org
Subject: ATAPI tape does not probe at boot
X-Send-Pr-Version: www-1.0

>Number:         15231
>Category:       i386
>Synopsis:       ATAPI tape does not probe at boot
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    sos
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Thu Dec  2 15:00:00 PST 1999
>Closed-Date:    Mon Feb 28 11:16:49 PST 2000
>Last-Modified:  Mon Feb 28 11:17:38 PST 2000
>Originator:     Bryan Liesner
>Release:        4.0 CURRENT
>Organization:
>Environment:
FreeBSD gravy.kishka.net 4.0-CURRENT FreeBSD 4.0-CURRENT #3: Wed Dec  1 18:59:41 EST 1999     bryan@gravy.kishka.net:/usr/src/sys/compile/GRAVY  i386
>Description:
CDROM/master HP Colorado/slave combination using the new ata/atapi drivers
During a verbose boot, the atapi driver "sees" two devices attached to
the primary motherboard IDE interface.  Only the CDROM driver is loaded
leaving the tape drive unuseable.
This combination works fine using the old wd drivers, and had always
worked until switching drivers
>How-To-Repeat:
Just boot the system, it's consistent.
>Fix:


>Release-Note:
>Audit-Trail:

From: Steve Price <sprice@hiwaay.net>
To: bleez@netaxs.com
Cc: freebsd-gnats-submit@FreeBSD.ORG
Subject: Re: i386/15231: ATAPI tape does not probe at boot
Date: Thu, 2 Dec 1999 17:08:55 -0600 (CST)

 On Thu, 2 Dec 1999 bleez@netaxs.com wrote:
 
 # >Description:
 # CDROM/master HP Colorado/slave combination using the new ata/atapi drivers
 # During a verbose boot, the atapi driver "sees" two devices attached to
 # the primary motherboard IDE interface.  Only the CDROM driver is loaded
 # leaving the tape drive unuseable.
 # This combination works fine using the old wd drivers, and had always
 # worked until switching drivers
 
 We're probably going to need a bit more information than this in
 order to solve the problem you are having.  The ouput of dmesg
 and a copy of your kernel config file would be nice.  But I'll
 take a guess and ask if you have a line like this in your kernel
 config file?
 
 	device atapist0
 
 
Responsible-Changed-From-To: freebsd-bugs->sos 
Responsible-Changed-By: steve 
Responsible-Changed-When: Thu Dec 2 17:16:39 PST 1999 
Responsible-Changed-Why:  
Originator says that Soren is taking a look at this one. 

From: bleez@netaxs.com
To: freebsd-gnats-submit@FreeBSD.org, bleez@netaxs.com
Cc: bleez@netaxs.com
Subject: Re: i386/15231: ATAPI tape does not probe at boot
Date: Wed, 26 Jan 2000 02:02:33 -0500 (EST)

 This PR can be closed.  Soren resolved the problem.
 
 -Bryan
 
State-Changed-From-To: open->closed 
State-Changed-By: sos 
State-Changed-When: Mon Feb 28 11:16:49 PST 2000 
State-Changed-Why:  

Fixed in 4.0. 
>Unformatted:
