From bhlewis@gte.net  Wed Feb 25 16:13:11 1998
Received: from gte.net (1Cust207.tnt1.lafayette.in.da.uu.net [208.254.19.207])
          by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id QAA04424
          for <FreeBSD-gnats-submit@freebsd.org>; Wed, 25 Feb 1998 16:13:09 -0800 (PST)
          (envelope-from bhlewis@gte.net)
Received: (from bhlewis@localhost)
	by gte.net (8.8.8/8.8.8) id TAA04241;
	Wed, 25 Feb 1998 19:08:54 -0500 (EST)
	(envelope-from bhlewis)
Message-Id: <199802260008.TAA04241@gte.net>
Date: Wed, 25 Feb 1998 19:08:54 -0500 (EST)
From: bhlewis@gte.net
Reply-To: bhlewis@gte.net
To: FreeBSD-gnats-submit@freebsd.org
Subject: Mention /etc/hosts.lpd et. al. in Handbook sect. 7.6.3.1
X-Send-Pr-Version: 3.2

>Number:         5851
>Category:       docs
>Synopsis:       Mention /etc/hosts.lpd et. al. in Handbook sect. 7.6.3.1
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-bugs
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          change-request
>Submitter-Id:   current-users
>Arrival-Date:   Wed Feb 25 16:20:01 PST 1998
>Closed-Date:    Sun Jul 19 18:29:09 PDT 1998
>Last-Modified:  Sun Jul 19 18:33:27 PDT 1998
>Originator:     Benjamin Lewis
>Release:        FreeBSD 2.2-980221-SNAP i386
>Organization:
None
>Environment:

	FreeBSD Handbook section 7.6.3.1 Printers Installed on Remote Hosts

>Description:

	The handbook section on sending print jobs to other hosts does not
	mention that the printer host should be set up to allow printing
	from other hosts.

>How-To-Repeat:

	netscape file:/usr/share/doc/handbook/handbook95.html#139

>Fix:
	
*** handbook95.html	Sat Feb 21 10:18:32 1998
--- handbook95.new.html	Wed Feb 25 18:48:45 1998
***************
*** 67,73 ****
  advanced setup in 
  <A HREF="handbook92.html#printing:advanced">Advanced Printer Setup</A> that you need.  Make sure
  to test the printer and see if it works with the features
! of LPD you have enabled.</p>
  <p>If you are using a printer with a network interface that is
  compatible with LPD, then the <em>printer host</em> in the
  discussion below is the printer itself, and the
--- 67,76 ----
  advanced setup in 
  <A HREF="handbook92.html#printing:advanced">Advanced Printer Setup</A> that you need.  Make sure
  to test the printer and see if it works with the features
! of LPD you have enabled.  Also ensure that the <em>local host</em>
! has authorization to use the LPD service on the <em>printer host</em> 
! (see <A HREF="handbook96.html:printing:advanced:restricting:remote">
! Restricting Jobs from Remote Printers</A>).</p>
  <p>If you are using a printer with a network interface that is
  compatible with LPD, then the <em>printer host</em> in the
  discussion below is the printer itself, and the
>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->closed 
State-Changed-By: jkoshy 
State-Changed-When: Sun Jul 19 18:29:09 PDT 1998 
State-Changed-Why:  
Rev 1.22 of "printing.sgml" has this change, thanks! 
>Unformatted:
