From ats@freebsd.first.gmd.de  Fri May 30 09:19:19 1997
Received: from freebsd.first.gmd.de (freebsd.first.gmd.de [194.95.170.200])
          by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id JAA23041
          for <FreeBSD-gnats-submit@freebsd.org>; Fri, 30 May 1997 09:19:18 -0700 (PDT)
Received: (from ats@localhost) by freebsd.first.gmd.de (8.8.5/8.6.12) id SAA10261; Fri, 30 May 1997 18:26:26 +0200 (MET DST)
Message-Id: <199705301626.SAA10261@freebsd.first.gmd.de>
Date: Fri, 30 May 1997 18:26:26 +0200 (MET DST)
From: Andreas Schulz <ats@freebsd.first.gmd.de>
Reply-To: ats@freebsd.first.gmd.de
To: FreeBSD-gnats-submit@freebsd.org
Subject: Addition for supported Hardware docs
X-Send-Pr-Version: 3.2

>Number:         3720
>Category:       docs
>Synopsis:       Addition for supported Hardware
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    nik
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          change-request
>Submitter-Id:   current-users
>Arrival-Date:   Fri May 30 09:20:00 PDT 1997
>Closed-Date:    Sun May 30 14:21:22 PDT 1999
>Last-Modified:  Sun May 30 14:21:41 PDT 1999
>Originator:     Andreas Schulz
>Release:        FreeBSD 3.0-CURRENT i386
>Organization:
GMD-FIRST
>Environment:

FreeBSD-3.0-current as of 27-28 May 97.

>Description:

The Adaptec 2930 alias/or/and  NEC SmartSCSI PCI Card can be
added to the supported Hardware. It is a SCSI-PCI Card with 
BOOT-Prom with the aic7850 Chip onboard and works with the current
ahc driver.
Sold here in Germany as a Controller Card for the NEC Multispin drives
but is really an Adaptec 2930, even the manual and the floppies are 
original Adaptec.

Boot-Messages:
ahc0 <Adaptec aic7850 SCSI host adapter> rev 3 int a irq 9 on pci0:5:0
mapreg[10] type=1 addr=0000fc00 size=0100.
mapreg[14] type=0 addr=ffbdf000 size=1000.
reg16: ioaddr=0xfc00 size=0x100
ahc0: Using left over BIOS settings
ahc0: aic7850 Single Channel, SCSI Id=7, 3 SCBs
ahc0: Resetting Channel A
ahc0: Downloading Sequencer Program...ahc0: 369
instructions downloaded
Done
ahc0: Probing channel A
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
ahc0: target 0 synchronous at 4.4MHz, offset = 0x8
sd0 at scbus0 target 0 lun 0
sd0: <FUJITSU M2266S-512 001D> type 0 fixed SCSI 2
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->suspended 
State-Changed-By: phk 
State-Changed-When: Wed Apr 29 06:23:54 PDT 1998 
State-Changed-Why:  
ready for doc'hand to handle 


Responsible-Changed-From-To: freebsd-bugs->doc 
Responsible-Changed-By: phk 
Responsible-Changed-When: Wed Apr 29 06:23:54 PDT 1998 
Responsible-Changed-Why:  
Responsible-Changed-From-To: doc->freebsd-doc 
Responsible-Changed-By: steve 
Responsible-Changed-When: Tue May 5 07:01:03 PDT 1998 
Responsible-Changed-Why:  
Belongs to freebsd-doc. 
State-Changed-From-To: suspended->analyzed 
State-Changed-By: nik 
State-Changed-When: Fri Apr 9 14:21:49 PDT 1999 
State-Changed-Why:  
Is this still the case?  If so, I'll commit it. 



Responsible-Changed-From-To: freebsd-doc->nik 
Responsible-Changed-By: nik 
Responsible-Changed-When: Fri Apr 9 14:21:49 PDT 1999 
Responsible-Changed-Why:  
I'll comit as necessary. 
State-Changed-From-To: analyzed->closed 
State-Changed-By: nik 
State-Changed-When: Sun May 30 14:21:22 PDT 1999 
State-Changed-Why:  
Been added to the Handbook, thanks. 
>Unformatted:
 >doc 
