From marion.iop.kiev.ua!vgrin@joint.isf.kiev.ua  Fri Dec 26 09:29:12 1997
Received: from relay1.kar.net (relay1.kar.net [195.5.17.66])
          by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA21877
          for <FreeBSD-gnats-submit@freebsd.org>; Fri, 26 Dec 1997 09:29:05 -0800 (PST)
          (envelope-from marion.iop.kiev.ua!vgrin@joint.isf.kiev.ua)
Received: from joint.isf.kiev.ua by relay1.kar.net with ESMTP id TAA04469;
  (8.8.last/vAk3/1.9) Fri, 26 Dec 1997 19:21:40 +0200 (EET)
Received: from marion.iop.kiev.ua by joint.isf.kiev.ua with ESMTP id TAA03061;
  (8.8.last/vak/1.9) Fri, 26 Dec 1997 19:21:06 +0200 (EET)
Received: by marion.iop.kiev.ua id TAA01471;
  (8.8.7/vak/1.9) Fri, 26 Dec 1997 19:26:32 +0200 (EET)
Message-Id: <199712261726.TAA01471@marion.iop.kiev.ua>
Date: Fri, 26 Dec 1997 19:26:32 +0200 (EET)
From: vgrin@marion.iop.kiev.ua (Victor M. Grinenko)
Reply-To: vgrin@marion.iop.kiev.ua
To: FreeBSD-gnats-submit@freebsd.org
Subject: how use RealTeck 8029: Plug and pray NE2000.
X-Send-Pr-Version: 3.2

>Number:         5381
>Category:       conf
>Synopsis:       how use RealTeck 8029: Plug and pray NE2000.
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    steve
>State:          closed
>Quarter:
>Keywords:
>Date-Required:
>Class:          support
>Submitter-Id:   current-users
>Arrival-Date:   Fri Dec 26 09:30:01 PST 1997
>Closed-Date:    Sat Dec 27 11:57:27 PST 1997
>Last-Modified:  Sun Dec 28 01:20:01 PST 1997
>Originator:     Victor M. Grinenko
>Release:        FreeBSD 2.1.5-STABLE i386
>Organization:
>Environment:

	

>Description:
pci0:1:2: Intel Corporation, device=0x7112, class=0x0c, subclass=0x03 int d irq 12 [no driver 
assigned]
        map(20): io(d800)


>How-To-Repeat:

	

>Fix:
	
	

>Release-Note:
>Audit-Trail:

From: "Daniel O'Callaghan" <danny@panda.hilink.com.au>
To: "Victor M. Grinenko" <vgrin@marion.iop.kiev.ua>
Cc: FreeBSD-gnats-submit@FreeBSD.ORG
Subject: Re: conf/5381: how use RealTeck 8029: Plug and pray NE2000.
Date: Sat, 27 Dec 1997 10:48:20 +1100 (EST)

 On Fri, 26 Dec 1997, Victor M. Grinenko wrote:
 
 > >Release:        FreeBSD 2.1.5-STABLE i386
 > >Environment:
 > 
 > >Description:
 > pci0:1:2: Intel Corporation, device=0x7112, class=0x0c, subclass=0x03 
 >   int d irq 12 [no driver assigned]   map(20): io(d800)
 
 You should upgrade to 2.2.5-RELEASE or higher (use 2.2-971225-SNAP from 
 releng22.freebsd.org).  2.1.5 is no longer supported, and it does not 
 support PCI ne2000 cards.
 
 Danny
State-Changed-From-To: open->closed 
State-Changed-By: steve 
State-Changed-When: Sat Dec 27 11:57:27 PST 1997 
State-Changed-Why:  
As Daniel O'Callaghan pointed out, the originator should 
upgrade to at least 2.2-STABLE and then if the board still 
does not respond properly, submit another PR with _all_ 
the relevant details. 

From: Stefan Esser <se@FreeBSD.ORG>
To: vgrin@marion.iop.kiev.ua
Cc: FreeBSD-gnats-submit@freebsd.org, Stefan Esser <se@freebsd.org>
Subject: Re: conf/5381: how use RealTeck 8029: Plug and pray NE2000.
Date: Fri, 26 Dec 1997 23:34:54 +0100

 On 1997-12-26 19:26 +0200, "Victor M. Grinenko" <vgrin@marion.iop.kiev.ua> wrote:
 > >Synopsis:       how use RealTeck 8029: Plug and pray NE2000.
 
 > >Release:        FreeBSD 2.1.5-STABLE i386
 
 > >Description:
 > pci0:1:2: Intel Corporation, device=0x7112, class=0x0c, subclass=0x03 int d irq 12 [no driver assigned]
 >         map(20): io(d800)
 
 First the easy answer: Upgrade to some 2.2 release,
 there are modifications in the generic network code,
 and the PCI NE2000 driver relies on them.
 
 
 If you don't want to upgrade, then you can compile
 in support for a simple ISA NE2000 card, but with
 parameters reported by a verbose boot. But I need
 the network card probe lines, not those from the
 USB part of your chip set ...
 
 
 Look for a vendor ID of 0x10ec and a device ID of
 0x8029. You need to specify the port base and IRQ
 in the config file, or may boot with "-c" and set
 them in user config mode (if you compiled support
 for it into your kernel).
 
 Regards, STefan
>Unformatted:
