From nobody  Sat Jun  7 16:10:05 1997
Received: (from nobody@localhost)
          by hub.freebsd.org (8.8.5/8.8.5) id QAA13275;
          Sat, 7 Jun 1997 16:10:05 -0700 (PDT)
Message-Id: <199706072310.QAA13275@hub.freebsd.org>
Date: Sat, 7 Jun 1997 16:10:05 -0700 (PDT)
From: lew@mmasia.com
To: freebsd-gnats-submit@freebsd.org
Subject: mitsumi cd-rom fx800 (8x cd-rom) is not recognized when the system is brought up. It cannot be probed and times out.  Possible driver IRQ problem.
X-Send-Pr-Version: www-1.0

>Number:         3807
>Category:       conf
>Synopsis:       mitsumi cd-rom fx800 (8x cd-rom) is not recognized when the system is brought up. It cannot be probed and times out.  Possible driver IRQ problem.
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sat Jun  7 16:20:00 PDT 1997
>Closed-Date:    Tue Mar 9 08:35:31 PST 1999
>Last-Modified:  Tue Mar  9 08:36:22 PST 1999
>Originator:     lew chua
>Release:        2.1.7
>Organization:
mmasia
>Environment:
FreeBSD gandalf.mmasia.com 2.1.7-Release FreeBSD 2.1.7-Release #0:
Wed Feb 19 23:08:10 1997 jkh@thingy.cdrom.com:/usr/src/sys/compile/GENERIC i386
>Description:
Mitsumi FX800 mcd0:timeout getting status mcd0: at 0x300 not found.
During bring up of BSD2.1.7.  Tried all the other IRQ's via changing
the configuration: 14 (Primary IRQ), 1f0 (address)
                   etc...
Made modifications to the config via "-c" on boot and made sure
no lines were in conflict.
Also wdc0 and wdc1 are on with their defaults settings
>How-To-Repeat:
always repeatable not able to see my cd-rom drive when 
doing a /stand/sysinstall procedure.
>Fix:
none.
>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->closed 
State-Changed-By: sheldonh 
State-Changed-When: Tue Mar 9 08:35:31 PST 1999 
State-Changed-Why:  
2.1 branch is dead. 
>Unformatted:
