From nobody@FreeBSD.org  Mon Oct 15 15:29:12 2001
Return-Path: <nobody@FreeBSD.org>
Received: from freefall.freebsd.org (freefall.FreeBSD.org [216.136.204.21])
	by hub.freebsd.org (Postfix) with ESMTP id B973537B403
	for <freebsd-gnats-submit@FreeBSD.org>; Mon, 15 Oct 2001 15:29:11 -0700 (PDT)
Received: (from nobody@localhost)
	by freefall.freebsd.org (8.11.4/8.11.4) id f9FMTBc65761;
	Mon, 15 Oct 2001 15:29:11 -0700 (PDT)
	(envelope-from nobody)
Message-Id: <200110152229.f9FMTBc65761@freefall.freebsd.org>
Date: Mon, 15 Oct 2001 15:29:11 -0700 (PDT)
From: Han Timmerman <han@TandG.de>
To: freebsd-gnats-submit@FreeBSD.org
Subject: Pre-Installation from FreeBSD 4.4 CDROM hangs after plip0 ... on ppbus0
X-Send-Pr-Version: www-1.0

>Number:         31305
>Category:       conf
>Synopsis:       Pre-Installation from FreeBSD 4.4 CDROM hangs after plip0 ... on ppbus0
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    freebsd-bugs
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Mon Oct 15 15:30:00 PDT 2001
>Closed-Date:    Mon Oct 15 15:40:07 PDT 2001
>Last-Modified:  Mon Oct 15 15:41:26 PDT 2001
>Originator:     Han Timmerman
>Release:        4.4
>Organization:
Timmerman & Gerber GmbH
>Environment:
(uname -a not available in this state)
Intel Pentium II/300, 256MB RAM, ASUS P2L97-S (Bios 1.05)
PCI-1: Elsa Winner1000Pro/x-2 (no IRQ)
PCI-2: 3COM905B (IRQ=11)
PCI-3: AHA-2400 (IRQ=10) Raid system for data only
On-Board SCSI: (IRQ=12) System disk (#0), CD-ROM (#5), CD-RW (#6)
>Description:
After wiping the system disk (had a previous FreeBSD 4.3 system before)
booted FreeBSD4.4 CDROM and followed instructions. Skipped kernel
configuration part (same procedure as I used with 4.3 release).
The systems installs several device drivers and hangs right after
displaying "plip0 <network.......> on ppbus0". It hangs forever.
The previous 4.3 system brings the "Waiting 15 seconds for SCSI device..."
message. The 4.4 does not but hangs.
>How-To-Repeat:
Same procedure as reported.
Also removing unused device drivers in the kernel config session does
not solve the problem and the system hangs.
When entering the kernel config session, 7 conflicts are reported. This
was also the case with the 4.3 release but the 4.3 release did not hang.
>Fix:

>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->closed 
State-Changed-By: dougb 
State-Changed-When: Mon Oct 15 15:40:07 PDT 2001 
State-Changed-Why:  

Please send this information to freebsd-questions@freebsd.org. You've covered 
most of the bases, but you should also include whether your conflicts were 
all resolved when you finished the configure for the 4.4 install. Also, 
have you changed anything in your BIOS settings between the two installs? 
Specifically related to the PnP options? 

Good luck, 

Doug 

http://www.FreeBSD.org/cgi/query-pr.cgi?pr=31305 
>Unformatted:
