From kheuer@gwdu60.gwdg.de  Thu Jan  7 02:38:39 1999
Received: from gwdu60.gwdg.de (gwdu60.gwdg.de [134.76.10.60])
          by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id CAA05024
          for <FreeBSD-gnats-submit@freebsd.org>; Thu, 7 Jan 1999 02:38:35 -0800 (PST)
          (envelope-from kheuer@gwdu60.gwdg.de)
Received: (from kheuer@localhost)
	by gwdu60.gwdg.de (8.9.0/8.9.0) id LAA07916;
	Thu, 7 Jan 1999 11:38:03 +0100 (CET)
Message-Id: <199901071038.LAA07916@gwdu60.gwdg.de>
Date: Thu, 7 Jan 1999 11:38:03 +0100 (CET)
From: Konrad Heuer <kheuer@gwdu60.gwdg.de>
Reply-To: kheuer@gwdu60.gwdg.de
To: FreeBSD-gnats-submit@freebsd.org
Subject: "lpc start queue" doesn't work in 3.0-R :  Current
X-Send-Pr-Version: 3.2

>Number:         9362
>Category:       bin
>Synopsis:       "lpc start queue" doesn't work in 3.0-R & Current
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    freebsd-bugs
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Thu Jan  7 02:40:01 PST 1999
>Closed-Date:    Mon Jan 24 17:41:40 PST 2000
>Last-Modified:  Mon Jan 24 17:41:55 PST 2000
>Originator:     Konrad Heuer
>Release:        FreeBSD 3.0-RELEASE i386
>Organization:
Gesellschaft fuer wissenschaftliche Datenverarbeitung mbH
                 Goettingen, Am Fassberg, 37077 Goettingen, Germany
>Environment:

	No very special environment.

	FreeBSD 3.0-RELEASE has been installed some days ago on
	a Pentium II system to build a printer server. 3.0-R is
	required because of Adaptec 7890 on-board SCSI controller
	not supported by 2.2.8-R.

	The bug is still present in FreeBSD-current.

>Description:

	After stopping a printer queue by "lpc stop ..." it can't
	be started by "lpc start ..." although the diagnostic output
	pretends so. "lpc up ..." does work, but is also enables the
	queue which is not always useful.

>How-To-Repeat:

	Suppose you've configured a printer "lp" in "/etc/printcap".
	Enter and watch the results:

	lpc up lp		# just to make sure lp is up
	lpc status lp		# verify
	lpc stop lp		# stop lp
	lpc status lp		# it it stopped
	lpc start lp		# start lp
	lpc status lp		# lp is still stopped
	lpc up lp		# start & enable lp
	lpc status lp		# lp is up


>Fix:
	
	Not fixed (no success).
>Release-Note:
>Audit-Trail:
State-Changed-From-To: open->closed 
State-Changed-By: dillon 
State-Changed-When: Mon Jan 24 17:41:40 PST 2000 
State-Changed-Why:  
committed to -3.x and -4.x 
>Unformatted:
