From hsu@lelu.suonsivu.net  Tue Aug 18 21:47:05 2009
Return-Path: <hsu@lelu.suonsivu.net>
Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34])
	by hub.freebsd.org (Postfix) with ESMTP id DEC97106568E
	for <FreeBSD-gnats-submit@freebsd.org>; Tue, 18 Aug 2009 21:47:05 +0000 (UTC)
	(envelope-from hsu@lelu.suonsivu.net)
Received: from lelu.suonsivu.net (lelu.suonsivu.net [212.16.96.66])
	by mx1.freebsd.org (Postfix) with ESMTP id 7F2398FC43
	for <FreeBSD-gnats-submit@freebsd.org>; Tue, 18 Aug 2009 21:47:04 +0000 (UTC)
Received: from lelu.suonsivu.net (localhost [127.0.0.1])
	by lelu.suonsivu.net (8.14.3/8.14.3) with ESMTP id n7IL9reJ001490
	for <FreeBSD-gnats-submit@freebsd.org>; Wed, 19 Aug 2009 00:09:53 +0300 (EEST)
	(envelope-from hsu@lelu.suonsivu.net)
Received: (from root@localhost)
	by lelu.suonsivu.net (8.14.3/8.14.3/Submit) id n7IL9rd4001489;
	Wed, 19 Aug 2009 00:09:53 +0300 (EEST)
	(envelope-from hsu)
Message-Id: <200908182109.n7IL9rd4001489@lelu.suonsivu.net>
Date: Wed, 19 Aug 2009 00:09:53 +0300 (EEST)
From: Heikki Suonsivu <hsu@bbnetworks.net>
Reply-To: Heikki Suonsivu <hsu@bbnetworks.net>
To: FreeBSD-gnats-submit@freebsd.org
Cc:
Subject: 8.0-BETA2 having problems with Asus M2N-SLI-deluxe motherboard
X-Send-Pr-Version: 3.113
X-GNATS-Notify:

>Number:         137942
>Category:       amd64
>Synopsis:       [pci] 8.0-BETA2 having problems with Asus M2N-SLI-deluxe motherboard [regression]
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    freebsd-amd64
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Aug 18 21:50:03 UTC 2009
>Closed-Date:    
>Last-Modified:  Mon Dec  6 16:20:08 UTC 2010
>Originator:     Heikki Suonsivu
>Release:        FreeBSD 7.2-STABLE amd64 (writing this report on)
>Organization:
bbnetworks.net
>Environment:
System: FreeBSD lelu.suonsivu.net 7.2-STABLE FreeBSD 7.2-STABLE #1: Wed Aug 19 01:35:43 EEST 2009 root@lelu.suonsivu.net:/usr/obj/usr/src/sys/HSU7 amd64

Below dmesg for 7.2 and 8.0 BETA2

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #1: Wed Aug 19 01:35:43 EEST 2009
    root@lelu.suonsivu.net:/usr/obj/usr/src/sys/HSU7
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2612.05-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40f32  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
  Cores per package: 2
usable memory = 2129444864 (2030 MB)
avail memory  = 2053017600 (1957 MB)
ACPI APIC Table: <Nvidia ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <Nvidia ASUSACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
uhub2: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2> on uhub1
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem 0xfe02d000-0xfe02dfff irq 23 at device 5.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f mem 0xfe02c000-0xfe02cfff irq 20 at device 5.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07,0xb800-0xb803,0xb400-0xb40f mem 0xfe02b000-0xfe02bfff irq 21 at device 5.2 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <multimedia, video> at device 6.0 (no driver attached)
pcm0: <AudioPCI ES1373-8> port 0x9c00-0x9c3f irq 18 at device 8.0 on pci1
pcm0: <Cirrus Logic CS4297A AC97 Codec>
pcm0: [ITHREAD]
pcm0: <Playback: DAC1,DAC2 / Record: ADC>
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfdeff000-0xfdeff7ff,0xfdef8000-0xfdefbfff at device 11.0 on pci1
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:e8:de:41
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x22c4000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:e8:de:41
fwe0: Ethernet address: 02:11:d8:e8:de:41
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:11:d8:00:00:e8:de:41 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
hdac0: <NVidia MCP55 High Definition Audio Controller> mem 0xfe020000-0xfe023fff irq 22 at device 6.1 on pci0
hdac0: HDA Driver Revision: 20090624_0136
hdac0: [ITHREAD]
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23 at device 8.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe0: Ethernet address: 00:18:f3:7c:73:06
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xac00-0xac07 mem 0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 20 at device 9.0 on pci0
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus1
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe1: Ethernet address: 00:18:f3:7c:79:7c
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci4: <JMicron JMB363 SATA300 controller> port 0x8c00-0x8c07,0x8800-0x8803,0x8400-0x8407,0x8000-0x8003,0x7c00-0x7c0f mem 0xfddfe000-0xfddfffff irq 16 at device 0.0 on pci2
atapci4: [ITHREAD]
atapci4: AHCI called from vendor specific driver
atapci4: AHCI Version 01.00 controller with 2 ports detected
ata8: <ATA channel 0> on atapci4
ata8: [ITHREAD]
ata9: <ATA channel 1> on atapci4
ata9: [ITHREAD]
ata10: <ATA channel 2> on atapci4
ata10: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0x6c00-0x6cff mem 0xe0000000-0xefffffff,0xfdcf0000-0xfdcfffff irq 16 at device 0.0 on pci3
vgapci1: <VGA-compatible display> mem 0xfdce0000-0xfdceffff at device 0.1 on pci3
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model MouseMan+, device ID 0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
device_attach: powernow0 attach returned 6
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
device_attach: powernow1 attach returned 6
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd27ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
IP Filter: v4.1.28 initialized.  Default = pass all, Logging = enabled
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to accept, logging limited to 1000 packets/entry by default
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ZFS filesystem version 13
ZFS storage pool version 13
acd0: DVDR <TSSTcorpCD/DVDW SH-S182D/SB04> at ata0-master UDMA33
acd1: CDRW <LITE-ON COMBO LTC-48161H/KH0N> at ata0-slave UDMA33
ad4: 953869MB <Seagate ST31000340AS SD04> at ata2-master SATA150
ad6: 953869MB <Seagate ST31000340AS SD04> at ata3-master SATA150
ad8: 953869MB <Seagate ST31000340AS SD15> at ata4-master SATA150
ad10: 715404MB <Seagate ST3750640AS 3.AAD> at ata5-master SATA150
ad12: 1430799MB <Seagate ST31500541AS CC32> at ata6-master SATA300
ad14: 715404MB <Seagate ST3750640AS 3.AAK> at ata7-master SATA150
ad18: 476940MB <Seagate ST3500630AS 3.AAK> at ata9-master SATA150
hdac0: HDA Codec #0: Analog Devices AD1988B
pcm1: <HDA Analog Devices AD1988B PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Analog Devices AD1988B PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm3: <HDA Analog Devices AD1988B PCM #2 Digital> at cad 0 nid 1 on hdac0
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:ata0:0:0:0): CAM Status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI Status: Check Condition
(probe0:ata0:0:0:0): NOT READY asc:3a,1
(probe0:ata0:0:0:0): Medium not present - tray closed
(probe0:ata0:0:0:0): Unretryable error
(probe1:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe1:ata0:0:1:0): CAM Status: SCSI Status Error
(probe1:ata0:0:1:0): SCSI Status: Check Condition
(probe1:ata0:0:1:0): NOT READY asc:3a,0
(probe1:ata0:0:1:0): Medium not present
(probe1:ata0:0:1:0): Unretryable error
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
cd0 at ata0 bus 0 target 0 lun 0
cdS0M: P:< TASPS TCcPoUr p# C1D /LDaVuDnWc hSeHd-!S1
82D SB04> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd1 at ata0 bus 0 target 1 lun 0
cd1: <LITE-ON COMBO LTC-48161H KH0N> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad18s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #1: Wed Aug 19 01:35:43 EEST 2009
    root@lelu.suonsivu.net:/usr/obj/usr/src/sys/HSU7
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2612.05-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40f32  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
  Cores per package: 2
usable memory = 2129444864 (2030 MB)
avail memory  = 2053017600 (1957 MB)
ACPI APIC Table: <Nvidia ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <Nvidia ASUSACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
uhub2: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2> on uhub1
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem 0xfe02d000-0xfe02dfff irq 23 at device 5.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f mem 0xfe02c000-0xfe02cfff irq 20 at device 5.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07,0xb800-0xb803,0xb400-0xb40f mem 0xfe02b000-0xfe02bfff irq 21 at device 5.2 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <multimedia, video> at device 6.0 (no driver attached)
pcm0: <AudioPCI ES1373-8> port 0x9c00-0x9c3f irq 18 at device 8.0 on pci1
pcm0: <Cirrus Logic CS4297A AC97 Codec>
pcm0: [ITHREAD]
pcm0: <Playback: DAC1,DAC2 / Record: ADC>
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfdeff000-0xfdeff7ff,0xfdef8000-0xfdefbfff at device 11.0 on pci1
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:e8:de:41
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x22c4000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:e8:de:41
fwe0: Ethernet address: 02:11:d8:e8:de:41
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:11:d8:00:00:e8:de:41 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
hdac0: <NVidia MCP55 High Definition Audio Controller> mem 0xfe020000-0xfe023fff irq 22 at device 6.1 on pci0
hdac0: HDA Driver Revision: 20090624_0136
hdac0: [ITHREAD]
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23 at device 8.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe0: Ethernet address: 00:18:f3:7c:73:06
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xac00-0xac07 mem 0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 20 at device 9.0 on pci0
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus1
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe1: Ethernet address: 00:18:f3:7c:79:7c
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci4: <JMicron JMB363 SATA300 controller> port 0x8c00-0x8c07,0x8800-0x8803,0x8400-0x8407,0x8000-0x8003,0x7c00-0x7c0f mem 0xfddfe000-0xfddfffff irq 16 at device 0.0 on pci2
atapci4: [ITHREAD]
atapci4: AHCI called from vendor specific driver
atapci4: AHCI Version 01.00 controller with 2 ports detected
ata8: <ATA channel 0> on atapci4
ata8: [ITHREAD]
ata9: <ATA channel 1> on atapci4
ata9: [ITHREAD]
ata10: <ATA channel 2> on atapci4
ata10: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0x6c00-0x6cff mem 0xe0000000-0xefffffff,0xfdcf0000-0xfdcfffff irq 16 at device 0.0 on pci3
vgapci1: <VGA-compatible display> mem 0xfdce0000-0xfdceffff at device 0.1 on pci3
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model MouseMan+, device ID 0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
device_attach: powernow0 attach returned 6
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
device_attach: powernow1 attach returned 6
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd27ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
IP Filter: v4.1.28 initialized.  Default = pass all, Logging = enabled
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to accept, logging limited to 1000 packets/entry by default
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ZFS filesystem version 13
ZFS storage pool version 13
acd0: DVDR <TSSTcorpCD/DVDW SH-S182D/SB04> at ata0-master UDMA33
acd1: CDRW <LITE-ON COMBO LTC-48161H/KH0N> at ata0-slave UDMA33
ad4: 953869MB <Seagate ST31000340AS SD04> at ata2-master SATA150
ad6: 953869MB <Seagate ST31000340AS SD04> at ata3-master SATA150
ad8: 953869MB <Seagate ST31000340AS SD15> at ata4-master SATA150
ad10: 715404MB <Seagate ST3750640AS 3.AAD> at ata5-master SATA150
ad12: 1430799MB <Seagate ST31500541AS CC32> at ata6-master SATA300
ad14: 715404MB <Seagate ST3750640AS 3.AAK> at ata7-master SATA150
ad18: 476940MB <Seagate ST3500630AS 3.AAK> at ata9-master SATA150
hdac0: HDA Codec #0: Analog Devices AD1988B
pcm1: <HDA Analog Devices AD1988B PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Analog Devices AD1988B PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm3: <HDA Analog Devices AD1988B PCM #2 Digital> at cad 0 nid 1 on hdac0
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:ata0:0:0:0): CAM Status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI Status: Check Condition
(probe0:ata0:0:0:0): NOT READY asc:3a,1
(probe0:ata0:0:0:0): Medium not present - tray closed
(probe0:ata0:0:0:0): Unretryable error
(probe1:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe1:ata0:0:1:0): CAM Status: SCSI Status Error
(probe1:ata0:0:1:0): SCSI Status: Check Condition
(probe1:ata0:0:1:0): NOT READY asc:3a,0
(probe1:ata0:0:1:0): Medium not present
(probe1:ata0:0:1:0): Unretryable error
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
cd0 at ata0 bus 0 target 0 lun S0M
Pc:d 0A:P  C<PTUS S#Tc1o rLpa uCnDc/hDeVdD!W
 SH-S182D SB04> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd1 at ata0 bus 0 target 1 lun 0
cd1: <LITE-ON COMBO LTC-48161H KH0N> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad18s1a

FREEBSD 8.0BETA2

Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-BETA2 #0: Wed Jul 15 21:48:41 UTC 2009
    root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2612.05-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40f32  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
real memory  = 2147483648 (2048 MB)
avail memory = 2049167360 (1954 MB)
ACPI APIC Table: <Nvidia ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <Nvidia ASUSACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 2.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 2.1 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem 0xfe02d000-0xfe02dfff irq 23 at device 5.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f mem 0xfe02c000-0xfe02cfff irq 20 at device 5.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07,0xb800-0xb803,0xb400-0xb40f mem 0xfe02b000-0xfe02bfff irq 21 at device 5.2 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <multimedia, video> at device 6.0 (no driver attached)
pci1: <multimedia, audio> at device 8.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfdeff000-0xfdeff7ff,0xfdef8000-0xfdefbfff at device 11.0 on pci1
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:e8:de:41
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1454000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:e8:de:41
fwe0: Ethernet address: 02:11:d8:e8:de:41
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:11:d8:00:00:e8:de:41 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
pci0: <multimedia, HDA> at device 6.1 (no driver attached)
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23 at device 8.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe0: Ethernet address: 00:18:f3:7c:73:06
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xac00-0xac07 mem 0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 20 at device 9.0 on pci0
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus1
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe1: Ethernet address: 00:18:f3:7c:79:7c
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci4: <JMicron JMB363 SATA300 controller> port 0x8c00-0x8c07,0x8800-0x8803,0x8400-0x8407,0x8000-0x8003,0x7c00-0x7c0f mem 0xfddfe000-0xfddfffff irq 16 at device 0.0 on pci2
atapci4: [ITHREAD]
atapci4: AHCI called from vendor specific driver
atapci4: AHCI v1.00 controller with 2 3Gbps ports, PM supported
ata8: <ATA channel 0> on atapci4
ata8: [ITHREAD]
ata9: <ATA channel 1> on atapci4
ata9: [ITHREAD]
ata10: <ATA channel 2> on atapci4
ata10: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0x6c00-0x6cff mem 0xe0000000-0xefffffff,0xfdcf0000-0xfdcfffff irq 16 at device 0.0 on pci3
vgapci1: <VGA-compatible display> mem 0xfdce0000-0xfdceffff at device 0.1 on pci3
acpi_tz0: <Thermal Zone> on acpi0
ACPI Warning: \\_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference 20090521 nspredef-1058
atrtc1: <AT realtime clock> port 0x70-0x73 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model MouseMan+, device ID 0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
device_attach: powernow0 attach returned 6
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
device_attach: powernow1 attach returned 6
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd27ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: Warning: Couldn't map Interrupt.
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80ff0820
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
acd0: DVDR <TSSTcorpCD/DVDW SH-S182D/SB04> at ata0-master UDMA33
acd1: CDRW <LITE-ON COMBO LTC-48161H/KH0N> at ata0-slave UDMA33
uhub0: 10 ports with 10 removable, self powered
uhub1: 10 ports with 10 removable, self powered
ugen1.2: <vendor 0x0409> at usbus1
uhub2: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
ad18: 476940MB <Seagate ST3500630AS 3.AAK> at ata9-master SATA150
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
GEOM: ad18s1: geometry does not match label (255h,63s != 16h,63s).
Trying to mount root from ufs:/dev/md0
lock order reversal:
 1st 0xffffff8029399748 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2558
 2nd 0xffffff000c04c800 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:285
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x81e
_sx_xlock() at _sx_xlock+0x55
ufsdirhash_acquire() at ufsdirhash_acquire+0x33
ufsdirhash_add() at ufsdirhash_add+0x19
ufs_direnter() at ufs_direnter+0x88b
ufs_makeinode() at ufs_makeinode+0x2a7
VOP_CREATE_APV() at VOP_CREATE_APV+0x8d
vn_open_cred() at vn_open_cred+0x468
kern_openat() at kern_openat+0x179
syscall() at syscall+0x1af
Xfast_syscall() at Xfast_syscall+0xe1
--- syscall (5, FreeBSD ELF64, open), rip = 0x58888c, rsp = 0x7fffffffe378, rbp = 0x8008152b0 ---

>Description:

I tried to source-upgrade to HEAD a few weeks back:

While motherboard found all the disks, FreeBSD 8 only found some of
them.  After kernel was up, there were various timeout errors on all
the disks visible except boot disk (on jmicron controller).  

I resupped and recompiled, after that, no access at all, just timeouts
from all disks being accessed, including the boot disk.

I suspected power supply motherboard problem first, replaced power supply.

Disconnecting all other drive other than boot disk still continued
just giving timeouts on boot disk.

I tried booting from 7.2R DVD, and that showed all the disks, so I
"upgraded" back to 7.2R, and the system started working, all disks are
found and they seem to be readable (at least with dd).

To figure out whether this is 8.0 related, I tried booting from 8.0B2
DVD, and it found only the boot disk, rather than finding few of the
disks.  It also behaves a bit differently from my compiled kernel, not
giving timeout errors, it just does not show any of the disks other
than boot disk.  My self-compiled 8 kernel did not have WITNESS etc,
which could explain difference (see above lock message, which did not
appear on self-compiled kernel).

Another problem noted, when going to fixit mode from 8.0B2 DVD, trying
to do anything with ethernet port produces no effect, ping did not get
replies (I could not attend the other end at the time).

>How-To-Repeat:

	Get Asus M2N-SLI Deluxe motherboard and stuff lots of disks to
	it.  My configuration is boot disk on jmicron controller and
	other disks on motherboard SATA.  This could also be NVIDIA
	chipset related, so it might show up on other motherboards
	using the same chipset.

>Fix:

	


>Release-Note:
>Audit-Trail:
Responsible-Changed-From-To: freebsd-bugs->freebsd-i386 
Responsible-Changed-By: linimon 
Responsible-Changed-When: Wed Aug 19 08:25:26 UTC 2009 
Responsible-Changed-Why:  
Annotate and reclassify. 

http://www.freebsd.org/cgi/query-pr.cgi?pr=137942 
Responsible-Changed-From-To: freebsd-i386->freebsd-amd64 
Responsible-Changed-By: linimon 
Responsible-Changed-When: Wed Aug 19 10:02:50 UTC 2009 
Responsible-Changed-Why:  
Submitter says problem appears when running in amd64 mode. 

http://www.freebsd.org/cgi/query-pr.cgi?pr=137942 

From: Mark Linimon <linimon@lonesome.com>
To: bug-followup@FreeBSD.org
Cc:  
Subject: Re: amd64/137942: 8.0-BETA2 having problems with Asus
	M2N-SLI-deluxe motherboard [regression]
Date: Wed, 19 Aug 2009 05:04:27 -0500

 ----- Forwarded message from Florian Smeets <flo@smeets.im> -----
 
 Mark i think this should be assigned to freebsd-amd64 as described in
 another PR the disks are found on i386 but not on amd64 as noted it 132372.
 
 PRs i know of which discuss this problem 128686, 132372, 137942
 
 further down is a answer from John to a mail thread on amd64/current
 
 -------- Original Message --------
 Subject: Re: Fwd: Re: [regression] 8.0-CURRENT amd64: SATA disks not
 attaching, MCP55 controller
 Date: Fri, 7 Aug 2009 08:44:33 -0400
 From: John Baldwin <jhb@freebsd.org>
 To: Florian Smeets <flo@kasimir.com>
 
 On Friday 07 August 2009 5:12:06 am Florian Smeets wrote:
 > Hi John,
 >
 > sorry for approaching you directly. Would you mind taking a look at this
 > thread in amd64/current.
 >
 > I vaguely remember that you implemented the mentioned feature, right?
 
 You do not need MCFG to work currently, no.  It does work on the vast
 majority
 of machines it has been tested on FWIW.  We may be able to blacklist it
 using
 ACPI quirks for certain known-bad motherboard / BIOS combinations however.
 
 > TIA,
 > Florian
 >
 > -------- Original Message --------
 > Subject: Re: [regression] 8.0-CURRENT amd64: SATA disks not attaching,
 > MCP55 controller
 > Date: Thu, 6 Aug 2009 20:21:56 +0200
 > From: Sticky Bit <stickybit@gmx.net>
 > Reply-To: stickybit@gmx.net
 > To: Florian Smeets <flo@kasimir.com>
 > CC: freebsd-current@freebsd.org, freebsd-amd64@freebsd.org
 >
 > On Thu August 6 2009 09:28:58 Florian Smeets wrote:
 >
 > > i had the same problem with MCP55 on amd64, i tried the new ahci module
 > > but to no avail.
 > >
 > > However if you set hw.pci.mcfg=0 the disks are found by the normal ata
 >
 > Thanks for the hint!
 >
 > I tried it again with 'set hw.pci.mcfg=0' from boot loader prompt and
 > now it
 > actually finds and attaches the disks as usual.
 >
 > But I do not know if I need 'support for PCI-e memory mapped config
 > access',
 > where it is needed and if it can cause problems later with an RELENG_8
 > installation if it is disabled like in RELENG_7.
 >
 > I only have one PCIe device, a PCIe graphics card, which is working well
 > with
 > drm.ko / radeon.ko modules and radeonhd driver under RELENG_7.
 >
 > Is it safe to stay with 'hw.pci.mcfg=0' under RELENG_8 for the future?
 >
 > And if so, should the default setting be changed from enabled to
 > disabled for
 > 8.0-RELEASE if it is not yet mature enough and the cause of problems?
 Looks
 > like several people are affected by this regression.
 >
 > --
 > Regards
 >
 
 Cheers,
 Florian
 
 ----- End forwarded message -----

From: Andriy Gapon <avg@freebsd.org>
To: bug-followup@freebsd.org, hsu@bbnetworks.net,
        John Baldwin <jhb@freebsd.org>
Cc:  
Subject: Re: amd64/137942: [pci] 8.0-BETA2 having problems with Asus M2N-SLI-deluxe
 motherboard [regression]
Date: Sun, 05 Dec 2010 14:40:16 +0200

 What's the current status of this issue?
 Is manual user action still required?  Or do we automatically blacklist this
 hardware?
 
 -- 
 Andriy Gapon

From: Heikki Suonsivu <hsu@bbnetworks.net>
To: Andriy Gapon <avg@freebsd.org>
Cc: bug-followup@freebsd.org, John Baldwin <jhb@freebsd.org>
Subject: Re: amd64/137942: [pci] 8.0-BETA2 having problems with Asus M2N-SLI-deluxe
 motherboard [regression]
Date: Mon, 06 Dec 2010 10:48:06 +0200

 I did try to upgrade to 8.1 some weeks ago on another computer with the 
 same motherboard, and had a problem again, many disks were not found, 
 but this is different.  The disks show up in boot, but the partitions 
 are not there, and I seemed to have problems with 2T disks only.  I was 
 busy at the time so I did not investigate further, just dropped back to 
 7.x.  What I did gather was:
 
 - Only 2T disks exhibit the problem in this case, other disks seemed to 
 work properly.  Note that this is different computer from the one in my 
 original PR, but same motherboard.
 
 - The raw devices are there and are readable by dd (adxx device)
 
 - Slices and partitions do not appear in /dev, only adxx device, no 
 slice devices or bsdlabel partitions.
 
 - All these disks have been initialized similarly, ie. fdisk -B -I adxx; 
 bsdlabel -w -B adxxs1; bsdlabel -e adxxs1.  All the disks have been 
 added after sysinstall, when expanding the system.  If I boot on 
 7.3-stable or 7.3R all partitions are found, but not on 8.x.
 
 I would also note that 2T disks not working may have a connection to my 
 other PR, about gmirrors disappearing after boot on 7.x.  This also only 
 happens on 2T disks, but not on smaller ones.  I have not been able to 
 test gmirrors on 8.x for above reasons.
 
 I do have an older Asus motherboard with Athlon cpu, and it does not 
 exhibit this problem, so this might be motherboard dependent.  However, 
 it is puzzling that the symtoms are different from 8.0 and 8.1.
 
 I have been dropping back to 7.x on most computers for other reasons, so 
 this is not urgent for me, but I can test booting from DVD on 8.1R and 
 gather a bit more information, if that would help.  Please give me some 
 guidance what you would like to see in terms of logs and boot options.
 
 Heikki Suonsivu
 
 
 On 12/5/10 2:40 PM, Andriy Gapon wrote:
 >
 > What's the current status of this issue?
 > Is manual user action still required?  Or do we automatically blacklist this
 > hardware?
 >
 

From: Andriy Gapon <avg@freebsd.org>
To: Heikki Suonsivu <hsu@bbnetworks.net>
Cc: bug-followup@freebsd.org, John Baldwin <jhb@freebsd.org>
Subject: Re: amd64/137942: [pci] 8.0-BETA2 having problems with Asus M2N-SLI-deluxe
 motherboard [regression]
Date: Mon, 06 Dec 2010 18:14:14 +0200

 on 06/12/2010 10:48 Heikki Suonsivu said the following:
 > I did try to upgrade to 8.1 some weeks ago on another computer with the same
 > motherboard, and had a problem again, many disks were not found, but this is
 > different.  The disks show up in boot, but the partitions are not there, and I
 > seemed to have problems with 2T disks only.  I was busy at the time so I did not
 > investigate further, just dropped back to 7.x.  What I did gather was:
 > 
 > - Only 2T disks exhibit the problem in this case, other disks seemed to work
 > properly.  Note that this is different computer from the one in my original PR,
 > but same motherboard.
 > 
 > - The raw devices are there and are readable by dd (adxx device)
 > 
 > - Slices and partitions do not appear in /dev, only adxx device, no slice devices
 > or bsdlabel partitions.
 > 
 > - All these disks have been initialized similarly, ie. fdisk -B -I adxx; bsdlabel
 > -w -B adxxs1; bsdlabel -e adxxs1.  All the disks have been added after sysinstall,
 > when expanding the system.  If I boot on 7.3-stable or 7.3R all partitions are
 > found, but not on 8.x.
 > 
 > I would also note that 2T disks not working may have a connection to my other PR,
 > about gmirrors disappearing after boot on 7.x.  This also only happens on 2T
 > disks, but not on smaller ones.  I have not been able to test gmirrors on 8.x for
 > above reasons.
 > 
 > I do have an older Asus motherboard with Athlon cpu, and it does not exhibit this
 > problem, so this might be motherboard dependent.  However, it is puzzling that the
 > symtoms are different from 8.0 and 8.1.
 > 
 > I have been dropping back to 7.x on most computers for other reasons, so this is
 > not urgent for me, but I can test booting from DVD on 8.1R and gather a bit more
 > information, if that would help.  Please give me some guidance what you would like
 > to see in terms of logs and boot options.
 
 Hmm, I think it should be a good idea to report this to geom@ mailing list.
 The more eyes looking at this the better - the people on the mailing list may have
 some ideas and suggestion.
 
 Also, a diff between verbose boot dmesg produced by 7.x and 8.1 could be enlightening.
 
 -- 
 Andriy Gapon
>Unformatted:
