From nobody@FreeBSD.org  Thu Jan  1 23:29:16 2009
Return-Path: <nobody@FreeBSD.org>
Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34])
	by hub.freebsd.org (Postfix) with ESMTP id 4405E106566B
	for <freebsd-gnats-submit@FreeBSD.org>; Thu,  1 Jan 2009 23:29:16 +0000 (UTC)
	(envelope-from nobody@FreeBSD.org)
Received: from www.freebsd.org (www.freebsd.org [IPv6:2001:4f8:fff6::21])
	by mx1.freebsd.org (Postfix) with ESMTP id 2F5EE8FC19
	for <freebsd-gnats-submit@FreeBSD.org>; Thu,  1 Jan 2009 23:29:15 +0000 (UTC)
	(envelope-from nobody@FreeBSD.org)
Received: from www.freebsd.org (localhost [127.0.0.1])
	by www.freebsd.org (8.14.3/8.14.3) with ESMTP id n01NTFPC011101
	for <freebsd-gnats-submit@FreeBSD.org>; Thu, 1 Jan 2009 23:29:15 GMT
	(envelope-from nobody@www.freebsd.org)
Received: (from nobody@localhost)
	by www.freebsd.org (8.14.3/8.14.3/Submit) id n01NTFeK011100;
	Thu, 1 Jan 2009 23:29:15 GMT
	(envelope-from nobody)
Message-Id: <200901012329.n01NTFeK011100@www.freebsd.org>
Date: Thu, 1 Jan 2009 23:29:15 GMT
From: Benjamin Stuppin <benjamin_stuppin@yahoo.de>
To: freebsd-gnats-submit@FreeBSD.org
Subject: 7.1-RC X -> systemcrash
X-Send-Pr-Version: www-3.1
X-GNATS-Notify:

>Number:         130103
>Category:       amd64
>Synopsis:       [hang] 7.1-RC X -> systemcrash
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    vwe
>State:          closed
>Quarter:        
>Keywords:       
>Date-Required:  
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Thu Jan 01 23:30:01 UTC 2009
>Closed-Date:    Sun Aug 08 20:23:17 UTC 2010
>Last-Modified:  Sun Aug 08 20:23:17 UTC 2010
>Originator:     Benjamin Stuppin
>Release:        7.1-RC2 amd64
>Organization:
>Environment:
FreeBSD rechner.local.net 7.1-RC2 FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13 UTC 2008     root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  amd64

>Description:
Hi,
when i install FreeBSD 7.1-RC1/2 and install X11 my system hangs up when i 
startx -> logout -> startx 
it also hung up after installing drm for radeonhd -> startx -> mplayer <movie> -> fullscreen -> normal mode 

The System freezes so i can't do anything (lack another pc to test if only x runs but sometime i also saw a kernel panic message when i was on terminal 1 during a crash).

I tryed it doing a installation from 7.1-RC DVD, all software installed from DVD. (Full install X-Devel)
Also tryed minimal installation -> freebsd-update -> ports from cvs -> build everything from source. 
Also tryed radeon/radeonhd/ati drivers for my r5xx based ati card. 

7.0 runs fine

System: 
Intel Core2quad Q6700
Asus P5K SP/EPU
Ati Radeon x1300 (pcie)

dmesg:

  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 4
usable memory = 4282462208 (4084 MB)
avail memory  = 4121108480 (3930 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Jan  1 2009 21:10:24)
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F, should be 76 [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr a280a2806000a28
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr a280a2806000a28
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr a280a2806000a28
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr a280a2806000a28
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on pci1
uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pcm0: <Intel 82801I High Definition Audio Controller> mem 0xfe8f8000-0xfe8fbfff irq 22 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib3
atapci0: <Marvell ATA controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
uhub7: port 6, set config at addr 2 failed
uhub7: device problem (INVAL), disabling port 6
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:10:5a:69:26:6b
xl0: [ITHREAD]
bktr0: <BrookTree 878> mem 0xfdffe000-0xfdffefff irq 17 at device 1.0 on pci4
bktr0: [GIANT-LOCKED]
bktr0: [ITHREAD]
bktr0: Hauppauge Model 61344 D221
bktr0: Detected a MSP3415D-A2 at 0x80
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, remote control.
pci4: <multimedia> at device 1.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 22 at device 31.2 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH9 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 22 at device 31.5 on pci0
atapci2: [ITHREAD]
ata6: <ATA channel 0> on atapci2
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
ata7: [ITHREAD]
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on uhub2
ums0: 16 buttons and Z dir.
uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on uhub2
umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
Timecounters tick every 1.000 msec
hptrr: no controller detected.
ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
pcm0: <HDA Codec: Realtek ALC883>
pcm0: <HDA Driver Revision: 20071129_0050>
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
GEOM_LABEL: Label for provider acd0 is iso9660/CANOSCAN.
Trying to mount root from ufs:/dev/ad8s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /lager was not properly dismounted
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
pid 749 (hald-addon-mouse-sy), uid 0: exited on signal 11 (core dumped)
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE-p7 #1: Thu Jan  1 21:10:29 CET 2009
    root@rechner.local.net:/usr/obj/usr/src/sys/VEGA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz (2666.77-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 4
usable memory = 4282462208 (4084 MB)
avail memory  = 4121108480 (3930 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Jan  1 2009 21:10:24)
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F, should be 76 [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr a280a2806000a28
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr a280a2806000a28
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr a280a2806000a28
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr a280a2806000a28
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on pci1
uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pcm0: <Intel 82801I High Definition Audio Controller> mem 0xfe8f8000-0xfe8fbfff irq 22 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib3
atapci0: <Marvell ATA controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
uhub7: port 6, set config at addr 2 failed
uhub7: device problem (INVAL), disabling port 6
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:10:5a:69:26:6b
xl0: [ITHREAD]
bktr0: <BrookTree 878> mem 0xfdffe000-0xfdffefff irq 17 at device 1.0 on pci4
bktr0: [GIANT-LOCKED]
bktr0: [ITHREAD]
bktr0: Hauppauge Model 61344 D221
bktr0: Detected a MSP3415D-A2 at 0x80
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, remote control.
pci4: <multimedia> at device 1.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 22 at device 31.2 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH9 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 22 at device 31.5 on pci0
atapci2: [ITHREAD]
ata6: <ATA channel 0> on atapci2
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
ata7: [ITHREAD]
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on uhub2
ums0: 16 buttons and Z dir.
uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on uhub2
umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
Timecounters tick every 1.000 msec
hptrr: no controller detected.
ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
pcm0: <HDA Codec: Realtek ALC883>
pcm0: <HDA Driver Revision: 20071129_0050>
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad8s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /lager was not properly dismounted
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
KLD radeon.ko: depends on drm - not available
kldload: Unsupported file type
warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
link_elf_obj: symbol DRM_MEM_DRIVER undefined
kldload: Unsupported file type
link_elf_obj: symbol DRM_MEM_DRIVER undefined
kldload: Unsupported file type
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
link_elf_obj: symbol devfs_get_cdevpriv undefined
kldload: Unsupported file type
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13 UTC 2008
    root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz (2666.78-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 4
usable memory = 4276789248 (4078 MB)
avail memory  = 4115329024 (3924 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on pci1
uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib3
atapci0: <Marvell ATA controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
uhub7: port 6, set config at addr 2 failed
uhub7: device problem (INVAL), disabling port 6
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:10:5a:69:26:6b
xl0: [ITHREAD]
pci4: <multimedia, video> at device 1.0 (no driver attached)
pci4: <multimedia> at device 1.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 22 at device 31.2 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH9 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 22 at device 31.5 on pci0
atapci2: [ITHREAD]
ata6: <ATA channel 0> on atapci2
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
ata7: [ITHREAD]
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F, should be 76 [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on uhub2
ums0: 16 buttons and Z dir.
uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on uhub2
umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80c6fd98
ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/md0
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max
 S6y0n csiencgo nddiss)k sf,o rv nsoydsetse mr epmraoicneisnsg .`.s.ynce9r ' to stop...9 4 0 0 0 done
All buffers synced.
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13 UTC 2008
    root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz (2666.77-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 4
usable memory = 4280983552 (4082 MB)
avail memory  = 4119531520 (3928 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on pci1
uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib3
atapci0: <Marvell ATA controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
uhub7: port 6, set config at addr 2 failed
uhub7: device problem (INVAL), disabling port 6
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:10:5a:69:26:6b
xl0: [ITHREAD]
pci4: <multimedia, video> at device 1.0 (no driver attached)
pci4: <multimedia> at device 1.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 22 at device 31.2 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH9 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 22 at device 31.5 on pci0
atapci2: [ITHREAD]
ata6: <ATA channel 0> on atapci2
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
ata7: [ITHREAD]
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F, should be 76 [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on uhub2
ums0: 16 buttons and Z dir.
uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on uhub2
umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
Timecounters tick every 1.000 msec
ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
Trying to mount root from ufs:/dev/ad8s1a
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13 UTC 2008
    root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz (2666.78-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 4
usable memory = 4280983552 (4082 MB)
avail memory  = 4119531520 (3928 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on pci1
uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
umass0: <TOSHIBA TransMemory, class 0/0, rev 2.00/1.10, addr 2> on uhub3
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib3
atapci0: <Marvell ATA controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
uhub7: port 6, set config at addr 2 failed
uhub7: device problem (INVAL), disabling port 6
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:10:5a:69:26:6b
xl0: [ITHREAD]
pci4: <multimedia, video> at device 1.0 (no driver attached)
pci4: <multimedia> at device 1.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 22 at device 31.2 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH9 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 22 at device 31.5 on pci0
atapci2: [ITHREAD]
ata6: <ATA channel 0> on atapci2
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
ata7: [ITHREAD]
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F, should be 76 [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on uhub2
ums0: 16 buttons and Z dir.
uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on uhub2
umass1: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
Timecounters tick every 1.000 msec
ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <TOSHIBA TransMemory 5.00> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: 3823MB (7830528 512 byte sectors: 255H 63S/T 487C)
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim1 bus 1 target 0 lun 1
da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim1 bus 1 target 0 lun 2
da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da4 at umass-sim1 bus 1 target 0 lun 3
da4: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device 
da4: 1.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
GEOM_LABEL: Label for provider da0s1 is msdosfs/4GB.
Trying to mount root from ufs:/dev/ad8s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
/tmp: mount pending error: blocks 0 files 1
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 4 files 2
GEOM_LABEL: Label msdosfs/4GB removed.

>How-To-Repeat:
Install everyting (+X) from dvd -> startx -> logout -> startx 

>Fix:


>Release-Note:
>Audit-Trail:

From: "Garrett Cooper" <yanefbsd@gmail.com>
To: "Benjamin Stuppin" <benjamin_stuppin@yahoo.de>
Cc: freebsd-gnats-submit@freebsd.org
Subject: Re: misc/130103: 7.1-RC X -> systemcrash
Date: Thu, 1 Jan 2009 15:46:08 -0800

 Benjamin,
     I have a 2 similar motherboards (P5K-e Wifi), and used to use
 another similar model (P5B Deluxe), but purposely use nVidia cards so
 I haven't run into this issue, and used to have a cousin of your
 processor (Q6600). I also run CURRENT.
     Some diagnostics to try:
     1. Have you checked for BIOS updates for your board? If it's not
 fully up to date I highly suggest investing in a thumbdrive and put
 the BIOS image on the drive, then flash from the in-BIOS flashing
 utility. The Windows utility is trash and will brick your motherboard
 50%+ of the time.
     2. Does 8-CURRENT boot, install, and work?
 Cheers,
 -Garrett

From: "Garrett Cooper" <yanefbsd@gmail.com>
To: "Benjamin Stuppin" <benjamin_stuppin@yahoo.de>
Cc: freebsd-gnats-submit@freebsd.org
Subject: Re: misc/130103: 7.1-RC X -> systemcrash
Date: Thu, 1 Jan 2009 15:47:11 -0800

     Also, try disabling ACPI and then see if you can reproduce the
 issue without it on.
 -Garrett
Responsible-Changed-From-To: freebsd-bugs->freebsd-amd64 
Responsible-Changed-By: linimon 
Responsible-Changed-When: Fri Jan 2 00:28:44 UTC 2009 
Responsible-Changed-Why:  
Reclassify. 

http://www.freebsd.org/cgi/query-pr.cgi?pr=130103 

From: "Oliver Pinter" <oliver.pntr@gmail.com>
To: "Benjamin Stuppin" <benjamin_stuppin@yahoo.de>
Cc: freebsd-gnats-submit@freebsd.org
Subject: Re: misc/130103: 7.1-RC X -> systemcrash
Date: Fri, 2 Jan 2009 16:46:01 +0100

 Hi,
 
 I have this system:
 ASUS P5Q-E
 Intel Q9300
 Sapphire RHD3450
 4GB RAM
 
 I use FreeBSD 7.1RC2 from csup (20081223) and from
 xorg-video-driver-ati from ports, with this driver worked fine,
 without system  crash, can you the ati driver use?
 
 On 1/2/09, Benjamin Stuppin <benjamin_stuppin@yahoo.de> wrote:
 >
 >>Number:         130103
 >>Category:       misc
 >>Synopsis:       7.1-RC X -> systemcrash
 >>Confidential:   no
 >>Severity:       non-critical
 >>Priority:       low
 >>Responsible:    freebsd-bugs
 >>State:          closed
 >>Quarter:
 >>Keywords:
 >>Date-Required:
 >>Class:          sw-bug
 >>Submitter-Id:   current-users
 >>Arrival-Date:   Thu Jan 01 23:30:01 UTC 2009
 >>Closed-Date:
 >>Last-Modified:
 >>Originator:     Benjamin Stuppin
 >>Release:        7.1-RC2 amd64
 >>Organization:
 >>Environment:
 > FreeBSD rechner.local.net 7.1-RC2 FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13
 > UTC 2008     root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 > amd64
 >
 >>Description:
 > Hi,
 > when i install FreeBSD 7.1-RC1/2 and install X11 my system hangs up when i
 > startx -> logout -> startx
 > it also hung up after installing drm for radeonhd -> startx -> mplayer
 > <movie> -> fullscreen -> normal mode
 >
 > The System freezes so i can't do anything (lack another pc to test if only x
 > runs but sometime i also saw a kernel panic message when i was on terminal 1
 > during a crash).
 >
 > I tryed it doing a installation from 7.1-RC DVD, all software installed from
 > DVD. (Full install X-Devel)
 > Also tryed minimal installation -> freebsd-update -> ports from cvs -> build
 > everything from source.
 > Also tryed radeon/radeonhd/ati drivers for my r5xx based ati card.
 >
 > 7.0 runs fine
 >
 > System:
 > Intel Core2quad Q6700
 > Asus P5K SP/EPU
 > Ati Radeon x1300 (pcie)
 >
 > dmesg:
 >
 >   Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
 >   AMD Features=0x20100800<SYSCALL,NX,LM>
 >   AMD Features2=0x1<LAHF>
 >   Cores per package: 4
 > usable memory = 4282462208 (4084 MB)
 > avail memory  = 4121108480 (3930 MB)
 > ACPI APIC Table: <A_M_I_ OEMAPIC >
 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 >  cpu0 (BSP): APIC ID:  0
 >  cpu1 (AP): APIC ID:  1
 >  cpu2 (AP): APIC ID:  2
 >  cpu3 (AP): APIC ID:  3
 > ioapic0 <Version 2.0> irqs 0-23 on motherboard
 > kbd1 at kbdmux0
 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 > hptrr: HPT RocketRAID controller driver v1.1 (Jan  1 2009 21:10:24)
 > acpi0: <A_M_I_ OEMXSDT> on motherboard
 > acpi0: [ITHREAD]
 > acpi0: Power Button (fixed)
 > acpi0: reservation of 0, a0000 (3) failed
 > acpi0: reservation of 100000, cff00000 (3) failed
 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
 > acpi0
 > Timecounter "HPET" frequency 14318180 Hz quality 900
 > cpu0: <ACPI CPU> on acpi0
 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F,
 > should be 76 [20070320]
 > est0: <Enhanced SpeedStep Frequency Control> on cpu0
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est0 attach returned 6
 > p4tcc0: <CPU Frequency Thermal Control> on cpu0
 > cpu1: <ACPI CPU> on acpi0
 > est1: <Enhanced SpeedStep Frequency Control> on cpu1
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est1 attach returned 6
 > p4tcc1: <CPU Frequency Thermal Control> on cpu1
 > cpu2: <ACPI CPU> on acpi0
 > est2: <Enhanced SpeedStep Frequency Control> on cpu2
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est2 attach returned 6
 > p4tcc2: <CPU Frequency Thermal Control> on cpu2
 > cpu3: <ACPI CPU> on acpi0
 > est3: <Enhanced SpeedStep Frequency Control> on cpu3
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est3 attach returned 6
 > p4tcc3: <CPU Frequency Thermal Control> on cpu3
 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 > pci0: <ACPI PCI bus> on pcib0
 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
 > pci1: <ACPI PCI bus> on pcib1
 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
 > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on
 > pci1
 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device
 > 26.0 on pci0
 > uhci0: [GIANT-LOCKED]
 > uhci0: [ITHREAD]
 > usb0: <UHCI (generic) USB controller> on uhci0
 > usb0: USB revision 1.0
 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 > uhub0: 2 ports with 2 removable, self powered
 > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device
 > 26.1 on pci0
 > uhci1: [GIANT-LOCKED]
 > uhci1: [ITHREAD]
 > usb1: <UHCI (generic) USB controller> on uhci1
 > usb1: USB revision 1.0
 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
 > uhub1: 2 ports with 2 removable, self powered
 > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device
 > 26.2 on pci0
 > uhci2: [GIANT-LOCKED]
 > uhci2: [ITHREAD]
 > usb2: <UHCI (generic) USB controller> on uhci2
 > usb2: USB revision 1.0
 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
 > uhub2: 2 ports with 2 removable, self powered
 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18
 > at device 26.7 on pci0
 > ehci0: [GIANT-LOCKED]
 > ehci0: [ITHREAD]
 > usb3: EHCI version 1.0
 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0
 > usb3: USB revision 2.0
 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
 > uhub3: 6 ports with 6 removable, self powered
 > pcm0: <Intel 82801I High Definition Audio Controller> mem
 > 0xfe8f8000-0xfe8fbfff irq 22 at device 27.0 on pci0
 > pcm0: [ITHREAD]
 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
 > pci3: <ACPI PCI bus> on pcib2
 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
 > pci2: <ACPI PCI bus> on pcib3
 > atapci0: <Marvell ATA controller> port
 > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem
 > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
 > atapci0: [ITHREAD]
 > ata2: <ATA channel 0> on atapci0
 > ata2: [ITHREAD]
 > ata3: <ATA channel 1> on atapci0
 > ata3: [ITHREAD]
 > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device
 > 29.0 on pci0
 > uhci3: [GIANT-LOCKED]
 > uhci3: [ITHREAD]
 > usb4: <UHCI (generic) USB controller> on uhci3
 > usb4: USB revision 1.0
 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
 > uhub4: 2 ports with 2 removable, self powered
 > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device
 > 29.1 on pci0
 > uhci4: [GIANT-LOCKED]
 > uhci4: [ITHREAD]
 > usb5: <UHCI (generic) USB controller> on uhci4
 > usb5: USB revision 1.0
 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
 > uhub5: 2 ports with 2 removable, self powered
 > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device
 > 29.2 on pci0
 > uhci5: [GIANT-LOCKED]
 > uhci5: [ITHREAD]
 > usb6: <UHCI (generic) USB controller> on uhci5
 > usb6: USB revision 1.0
 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
 > uhub6: 2 ports with 2 removable, self powered
 > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23
 > at device 29.7 on pci0
 > ehci1: [GIANT-LOCKED]
 > ehci1: [ITHREAD]
 > usb7: EHCI version 1.0
 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6
 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1
 > usb7: USB revision 2.0
 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
 > uhub7: 6 ports with 6 removable, self powered
 > uhub7: port 6, set config at addr 2 failed
 > uhub7: device problem (INVAL), disabling port 6
 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 > pci4: <ACPI PCI bus> on pcib4
 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem
 > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
 > miibus0: <MII bus> on xl0
 > xlphy0: <3Com internal media interface> PHY 24 on miibus0
 > xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > xl0: Ethernet address: 00:10:5a:69:26:6b
 > xl0: [ITHREAD]
 > bktr0: <BrookTree 878> mem 0xfdffe000-0xfdffefff irq 17 at device 1.0 on
 > pci4
 > bktr0: [GIANT-LOCKED]
 > bktr0: [ITHREAD]
 > bktr0: Hauppauge Model 61344 D221
 > bktr0: Detected a MSP3415D-A2 at 0x80
 > bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo,
 > remote control.
 > pci4: <multimedia> at device 1.1 (no driver attached)
 > isab0: <PCI-ISA bridge> at device 31.0 on pci0
 > isa0: <ISA bus> on isab0
 > atapci1: <Intel ICH9 SATA300 controller> port
 > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f
 > irq 22 at device 31.2 on pci0
 > atapci1: [ITHREAD]
 > ata4: <ATA channel 0> on atapci1
 > ata4: [ITHREAD]
 > ata5: <ATA channel 1> on atapci1
 > ata5: [ITHREAD]
 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 > atapci2: <Intel ICH9 SATA300 controller> port
 > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f
 > irq 22 at device 31.5 on pci0
 > atapci2: [ITHREAD]
 > ata6: <ATA channel 0> on atapci2
 > ata6: [ITHREAD]
 > ata7: <ATA channel 1> on atapci2
 > ata7: [ITHREAD]
 > acpi_button0: <Power Button> on acpi0
 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
 > acpi0
 > fdc0: [FILTER]
 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
 > acpi0
 > sio0: type 16550A
 > sio0: [FILTER]
 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 > atkbd0: <AT Keyboard> irq 1 on atkbdc0
 > kbd0 at atkbd0
 > atkbd0: [GIANT-LOCKED]
 > atkbd0: [ITHREAD]
 > ppc0: cannot reserve I/O port range
 > sc0: <System console> at flags 0x100 on isa0
 > sc0: VGA <16 virtual consoles, flags=0x300>
 > sio1: configured irq 3 not in bitmap of probed irqs 0
 > sio1: port may not be enabled
 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > ums0: 16 buttons and Z dir.
 > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
 > Timecounters tick every 1.000 msec
 > hptrr: no controller detected.
 > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
 > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
 > pcm0: <HDA Codec: Realtek ALC883>
 > pcm0: <HDA Driver Revision: 20071129_0050>
 > SMP: AP CPU #1 Launched!
 > SMP: AP CPU #2 Launched!
 > SMP: AP CPU #3 Launched!
 > da0 at umass-sim0 bus 0 target 0 lun 0
 > da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da0: 1.000MB/s transfers
 > da0: Attempt to query device size failed: NOT READY, Medium not present
 > da1 at umass-sim0 bus 0 target 0 lun 1
 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da1: 1.000MB/s transfers
 > da1: Attempt to query device size failed: NOT READY, Medium not present
 > da2 at umass-sim0 bus 0 target 0 lun 2
 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da2: 1.000MB/s transfers
 > da2: Attempt to query device size failed: NOT READY, Medium not present
 > da3 at umass-sim0 bus 0 target 0 lun 3
 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da3: 1.000MB/s transfers
 > da3: Attempt to query device size failed: NOT READY, Medium not present
 > GEOM_LABEL: Label for provider acd0 is iso9660/CANOSCAN.
 > Trying to mount root from ufs:/dev/ad8s1a
 > WARNING: / was not properly dismounted
 > WARNING: /tmp was not properly dismounted
 > WARNING: /usr was not properly dismounted
 > WARNING: /var was not properly dismounted
 > WARNING: /lager was not properly dismounted
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > pid 749 (hald-addon-mouse-sy), uid 0: exited on signal 11 (core dumped)
 > Copyright (c) 1992-2008 The FreeBSD Project.
 > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 > 	The Regents of the University of California. All rights reserved.
 > FreeBSD is a registered trademark of The FreeBSD Foundation.
 > FreeBSD 7.0-RELEASE-p7 #1: Thu Jan  1 21:10:29 CET 2009
 >     root@rechner.local.net:/usr/obj/usr/src/sys/VEGA
 > Timecounter "i8254" frequency 1193182 Hz quality 0
 > CPU: Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz (2666.77-MHz K8-class
 > CPU)
 >   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
 >
 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 >   Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
 >   AMD Features=0x20100800<SYSCALL,NX,LM>
 >   AMD Features2=0x1<LAHF>
 >   Cores per package: 4
 > usable memory = 4282462208 (4084 MB)
 > avail memory  = 4121108480 (3930 MB)
 > ACPI APIC Table: <A_M_I_ OEMAPIC >
 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 >  cpu0 (BSP): APIC ID:  0
 >  cpu1 (AP): APIC ID:  1
 >  cpu2 (AP): APIC ID:  2
 >  cpu3 (AP): APIC ID:  3
 > ioapic0 <Version 2.0> irqs 0-23 on motherboard
 > kbd1 at kbdmux0
 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 > hptrr: HPT RocketRAID controller driver v1.1 (Jan  1 2009 21:10:24)
 > acpi0: <A_M_I_ OEMXSDT> on motherboard
 > acpi0: [ITHREAD]
 > acpi0: Power Button (fixed)
 > acpi0: reservation of 0, a0000 (3) failed
 > acpi0: reservation of 100000, cff00000 (3) failed
 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
 > acpi0
 > Timecounter "HPET" frequency 14318180 Hz quality 900
 > cpu0: <ACPI CPU> on acpi0
 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F,
 > should be 76 [20070320]
 > est0: <Enhanced SpeedStep Frequency Control> on cpu0
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est0 attach returned 6
 > p4tcc0: <CPU Frequency Thermal Control> on cpu0
 > cpu1: <ACPI CPU> on acpi0
 > est1: <Enhanced SpeedStep Frequency Control> on cpu1
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est1 attach returned 6
 > p4tcc1: <CPU Frequency Thermal Control> on cpu1
 > cpu2: <ACPI CPU> on acpi0
 > est2: <Enhanced SpeedStep Frequency Control> on cpu2
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est2 attach returned 6
 > p4tcc2: <CPU Frequency Thermal Control> on cpu2
 > cpu3: <ACPI CPU> on acpi0
 > est3: <Enhanced SpeedStep Frequency Control> on cpu3
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr a280a2806000a28
 > device_attach: est3 attach returned 6
 > p4tcc3: <CPU Frequency Thermal Control> on cpu3
 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 > pci0: <ACPI PCI bus> on pcib0
 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
 > pci1: <ACPI PCI bus> on pcib1
 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
 > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on
 > pci1
 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device
 > 26.0 on pci0
 > uhci0: [GIANT-LOCKED]
 > uhci0: [ITHREAD]
 > usb0: <UHCI (generic) USB controller> on uhci0
 > usb0: USB revision 1.0
 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 > uhub0: 2 ports with 2 removable, self powered
 > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device
 > 26.1 on pci0
 > uhci1: [GIANT-LOCKED]
 > uhci1: [ITHREAD]
 > usb1: <UHCI (generic) USB controller> on uhci1
 > usb1: USB revision 1.0
 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
 > uhub1: 2 ports with 2 removable, self powered
 > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device
 > 26.2 on pci0
 > uhci2: [GIANT-LOCKED]
 > uhci2: [ITHREAD]
 > usb2: <UHCI (generic) USB controller> on uhci2
 > usb2: USB revision 1.0
 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
 > uhub2: 2 ports with 2 removable, self powered
 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18
 > at device 26.7 on pci0
 > ehci0: [GIANT-LOCKED]
 > ehci0: [ITHREAD]
 > usb3: EHCI version 1.0
 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0
 > usb3: USB revision 2.0
 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
 > uhub3: 6 ports with 6 removable, self powered
 > pcm0: <Intel 82801I High Definition Audio Controller> mem
 > 0xfe8f8000-0xfe8fbfff irq 22 at device 27.0 on pci0
 > pcm0: [ITHREAD]
 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
 > pci3: <ACPI PCI bus> on pcib2
 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
 > pci2: <ACPI PCI bus> on pcib3
 > atapci0: <Marvell ATA controller> port
 > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem
 > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
 > atapci0: [ITHREAD]
 > ata2: <ATA channel 0> on atapci0
 > ata2: [ITHREAD]
 > ata3: <ATA channel 1> on atapci0
 > ata3: [ITHREAD]
 > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device
 > 29.0 on pci0
 > uhci3: [GIANT-LOCKED]
 > uhci3: [ITHREAD]
 > usb4: <UHCI (generic) USB controller> on uhci3
 > usb4: USB revision 1.0
 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
 > uhub4: 2 ports with 2 removable, self powered
 > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device
 > 29.1 on pci0
 > uhci4: [GIANT-LOCKED]
 > uhci4: [ITHREAD]
 > usb5: <UHCI (generic) USB controller> on uhci4
 > usb5: USB revision 1.0
 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
 > uhub5: 2 ports with 2 removable, self powered
 > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device
 > 29.2 on pci0
 > uhci5: [GIANT-LOCKED]
 > uhci5: [ITHREAD]
 > usb6: <UHCI (generic) USB controller> on uhci5
 > usb6: USB revision 1.0
 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
 > uhub6: 2 ports with 2 removable, self powered
 > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23
 > at device 29.7 on pci0
 > ehci1: [GIANT-LOCKED]
 > ehci1: [ITHREAD]
 > usb7: EHCI version 1.0
 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6
 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1
 > usb7: USB revision 2.0
 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
 > uhub7: 6 ports with 6 removable, self powered
 > uhub7: port 6, set config at addr 2 failed
 > uhub7: device problem (INVAL), disabling port 6
 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 > pci4: <ACPI PCI bus> on pcib4
 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem
 > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
 > miibus0: <MII bus> on xl0
 > xlphy0: <3Com internal media interface> PHY 24 on miibus0
 > xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > xl0: Ethernet address: 00:10:5a:69:26:6b
 > xl0: [ITHREAD]
 > bktr0: <BrookTree 878> mem 0xfdffe000-0xfdffefff irq 17 at device 1.0 on
 > pci4
 > bktr0: [GIANT-LOCKED]
 > bktr0: [ITHREAD]
 > bktr0: Hauppauge Model 61344 D221
 > bktr0: Detected a MSP3415D-A2 at 0x80
 > bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo,
 > remote control.
 > pci4: <multimedia> at device 1.1 (no driver attached)
 > isab0: <PCI-ISA bridge> at device 31.0 on pci0
 > isa0: <ISA bus> on isab0
 > atapci1: <Intel ICH9 SATA300 controller> port
 > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f
 > irq 22 at device 31.2 on pci0
 > atapci1: [ITHREAD]
 > ata4: <ATA channel 0> on atapci1
 > ata4: [ITHREAD]
 > ata5: <ATA channel 1> on atapci1
 > ata5: [ITHREAD]
 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 > atapci2: <Intel ICH9 SATA300 controller> port
 > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f
 > irq 22 at device 31.5 on pci0
 > atapci2: [ITHREAD]
 > ata6: <ATA channel 0> on atapci2
 > ata6: [ITHREAD]
 > ata7: <ATA channel 1> on atapci2
 > ata7: [ITHREAD]
 > acpi_button0: <Power Button> on acpi0
 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
 > acpi0
 > fdc0: [FILTER]
 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
 > acpi0
 > sio0: type 16550A
 > sio0: [FILTER]
 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 > atkbd0: <AT Keyboard> irq 1 on atkbdc0
 > kbd0 at atkbd0
 > atkbd0: [GIANT-LOCKED]
 > atkbd0: [ITHREAD]
 > ppc0: cannot reserve I/O port range
 > sc0: <System console> at flags 0x100 on isa0
 > sc0: VGA <16 virtual consoles, flags=0x300>
 > sio1: configured irq 3 not in bitmap of probed irqs 0
 > sio1: port may not be enabled
 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > ums0: 16 buttons and Z dir.
 > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
 > Timecounters tick every 1.000 msec
 > hptrr: no controller detected.
 > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
 > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
 > pcm0: <HDA Codec: Realtek ALC883>
 > pcm0: <HDA Driver Revision: 20071129_0050>
 > SMP: AP CPU #3 Launched!
 > SMP: AP CPU #1 Launched!
 > SMP: AP CPU #2 Launched!
 > da0 at umass-sim0 bus 0 target 0 lun 0
 > da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da0: 1.000MB/s transfers
 > da0: Attempt to query device size failed: NOT READY, Medium not present
 > da1 at umass-sim0 bus 0 target 0 lun 1
 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da1: 1.000MB/s transfers
 > da1: Attempt to query device size failed: NOT READY, Medium not present
 > da2 at umass-sim0 bus 0 target 0 lun 2
 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da2: 1.000MB/s transfers
 > da2: Attempt to query device size failed: NOT READY, Medium not present
 > da3 at umass-sim0 bus 0 target 0 lun 3
 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da3: 1.000MB/s transfers
 > da3: Attempt to query device size failed: NOT READY, Medium not present
 > Trying to mount root from ufs:/dev/ad8s1a
 > WARNING: / was not properly dismounted
 > WARNING: /tmp was not properly dismounted
 > WARNING: /usr was not properly dismounted
 > WARNING: /var was not properly dismounted
 > WARNING: /lager was not properly dismounted
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > KLD radeon.ko: depends on drm - not available
 > kldload: Unsupported file type
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file
 > link_elf_obj: symbol DRM_MEM_DRIVER undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol DRM_MEM_DRIVER undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > link_elf_obj: symbol devfs_get_cdevpriv undefined
 > kldload: Unsupported file type
 > Copyright (c) 1992-2008 The FreeBSD Project.
 > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 > 	The Regents of the University of California. All rights reserved.
 > FreeBSD is a registered trademark of The FreeBSD Foundation.
 > FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13 UTC 2008
 >     root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 > Timecounter "i8254" frequency 1193182 Hz quality 0
 > CPU: Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz (2666.78-MHz K8-class
 > CPU)
 >   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
 >
 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 >   Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
 >   AMD Features=0x20100800<SYSCALL,NX,LM>
 >   AMD Features2=0x1<LAHF>
 >   Cores per package: 4
 > usable memory = 4276789248 (4078 MB)
 > avail memory  = 4115329024 (3924 MB)
 > ACPI APIC Table: <A_M_I_ OEMAPIC >
 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 >  cpu0 (BSP): APIC ID:  0
 >  cpu1 (AP): APIC ID:  1
 >  cpu2 (AP): APIC ID:  2
 >  cpu3 (AP): APIC ID:  3
 > ioapic0 <Version 2.0> irqs 0-23 on motherboard
 > kbd1 at kbdmux0
 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 > acpi0: <A_M_I_ OEMXSDT> on motherboard
 > acpi0: [ITHREAD]
 > acpi0: Power Button (fixed)
 > acpi0: reservation of 0, a0000 (3) failed
 > acpi0: reservation of 100000, cff00000 (3) failed
 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
 > acpi0
 > Timecounter "HPET" frequency 14318180 Hz quality 900
 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 > pci0: <ACPI PCI bus> on pcib0
 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
 > pci1: <ACPI PCI bus> on pcib1
 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
 > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on
 > pci1
 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device
 > 26.0 on pci0
 > uhci0: [GIANT-LOCKED]
 > uhci0: [ITHREAD]
 > usb0: <UHCI (generic) USB controller> on uhci0
 > usb0: USB revision 1.0
 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 > uhub0: 2 ports with 2 removable, self powered
 > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device
 > 26.1 on pci0
 > uhci1: [GIANT-LOCKED]
 > uhci1: [ITHREAD]
 > usb1: <UHCI (generic) USB controller> on uhci1
 > usb1: USB revision 1.0
 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
 > uhub1: 2 ports with 2 removable, self powered
 > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device
 > 26.2 on pci0
 > uhci2: [GIANT-LOCKED]
 > uhci2: [ITHREAD]
 > usb2: <UHCI (generic) USB controller> on uhci2
 > usb2: USB revision 1.0
 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
 > uhub2: 2 ports with 2 removable, self powered
 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18
 > at device 26.7 on pci0
 > ehci0: [GIANT-LOCKED]
 > ehci0: [ITHREAD]
 > usb3: EHCI version 1.0
 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0
 > usb3: USB revision 2.0
 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
 > uhub3: 6 ports with 6 removable, self powered
 > pci0: <multimedia> at device 27.0 (no driver attached)
 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
 > pci3: <ACPI PCI bus> on pcib2
 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
 > pci2: <ACPI PCI bus> on pcib3
 > atapci0: <Marvell ATA controller> port
 > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem
 > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
 > atapci0: [ITHREAD]
 > ata2: <ATA channel 0> on atapci0
 > ata2: [ITHREAD]
 > ata3: <ATA channel 1> on atapci0
 > ata3: [ITHREAD]
 > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device
 > 29.0 on pci0
 > uhci3: [GIANT-LOCKED]
 > uhci3: [ITHREAD]
 > usb4: <UHCI (generic) USB controller> on uhci3
 > usb4: USB revision 1.0
 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
 > uhub4: 2 ports with 2 removable, self powered
 > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device
 > 29.1 on pci0
 > uhci4: [GIANT-LOCKED]
 > uhci4: [ITHREAD]
 > usb5: <UHCI (generic) USB controller> on uhci4
 > usb5: USB revision 1.0
 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
 > uhub5: 2 ports with 2 removable, self powered
 > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device
 > 29.2 on pci0
 > uhci5: [GIANT-LOCKED]
 > uhci5: [ITHREAD]
 > usb6: <UHCI (generic) USB controller> on uhci5
 > usb6: USB revision 1.0
 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
 > uhub6: 2 ports with 2 removable, self powered
 > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23
 > at device 29.7 on pci0
 > ehci1: [GIANT-LOCKED]
 > ehci1: [ITHREAD]
 > usb7: EHCI version 1.0
 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6
 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1
 > usb7: USB revision 2.0
 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
 > uhub7: 6 ports with 6 removable, self powered
 > uhub7: port 6, set config at addr 2 failed
 > uhub7: device problem (INVAL), disabling port 6
 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 > pci4: <ACPI PCI bus> on pcib4
 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem
 > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
 > miibus0: <MII bus> on xl0
 > xlphy0: <3Com internal media interface> PHY 24 on miibus0
 > xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > xl0: Ethernet address: 00:10:5a:69:26:6b
 > xl0: [ITHREAD]
 > pci4: <multimedia, video> at device 1.0 (no driver attached)
 > pci4: <multimedia> at device 1.1 (no driver attached)
 > isab0: <PCI-ISA bridge> at device 31.0 on pci0
 > isa0: <ISA bus> on isab0
 > atapci1: <Intel ICH9 SATA300 controller> port
 > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f
 > irq 22 at device 31.2 on pci0
 > atapci1: [ITHREAD]
 > ata4: <ATA channel 0> on atapci1
 > ata4: [ITHREAD]
 > ata5: <ATA channel 1> on atapci1
 > ata5: [ITHREAD]
 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 > atapci2: <Intel ICH9 SATA300 controller> port
 > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f
 > irq 22 at device 31.5 on pci0
 > atapci2: [ITHREAD]
 > ata6: <ATA channel 0> on atapci2
 > ata6: [ITHREAD]
 > ata7: <ATA channel 1> on atapci2
 > ata7: [ITHREAD]
 > acpi_button0: <Power Button> on acpi0
 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
 > acpi0
 > fdc0: [FILTER]
 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
 > acpi0
 > sio0: type 16550A
 > sio0: [FILTER]
 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 > atkbd0: <AT Keyboard> irq 1 on atkbdc0
 > kbd0 at atkbd0
 > atkbd0: [GIANT-LOCKED]
 > atkbd0: [ITHREAD]
 > cpu0: <ACPI CPU> on acpi0
 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F,
 > should be 76 [20070320]
 > est0: <Enhanced SpeedStep Frequency Control> on cpu0
 > p4tcc0: <CPU Frequency Thermal Control> on cpu0
 > cpu1: <ACPI CPU> on acpi0
 > est1: <Enhanced SpeedStep Frequency Control> on cpu1
 > p4tcc1: <CPU Frequency Thermal Control> on cpu1
 > cpu2: <ACPI CPU> on acpi0
 > est2: <Enhanced SpeedStep Frequency Control> on cpu2
 > p4tcc2: <CPU Frequency Thermal Control> on cpu2
 > cpu3: <ACPI CPU> on acpi0
 > est3: <Enhanced SpeedStep Frequency Control> on cpu3
 > p4tcc3: <CPU Frequency Thermal Control> on cpu3
 > ppc0: cannot reserve I/O port range
 > sc0: <System console> at flags 0x100 on isa0
 > sc0: VGA <16 virtual consoles, flags=0x300>
 > sio1: configured irq 3 not in bitmap of probed irqs 0
 > sio1: port may not be enabled
 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > ums0: 16 buttons and Z dir.
 > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
 > Timecounters tick every 1.000 msec
 > md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80c6fd98
 > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
 > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
 > SMP: AP CPU #1 Launched!
 > SMP: AP CPU #3 Launched!
 > SMP: AP CPU #2 Launched!
 > GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
 > da0 at umass-sim0 bus 0 target 0 lun 0
 > da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da0: 1.000MB/s transfers
 > da0: Attempt to query device size failed: NOT READY, Medium not present
 > da1 at umass-sim0 bus 0 target 0 lun 1
 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da1: 1.000MB/s transfers
 > da1: Attempt to query device size failed: NOT READY, Medium not present
 > da2 at umass-sim0 bus 0 target 0 lun 2
 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da2: 1.000MB/s transfers
 > da2: Attempt to query device size failed: NOT READY, Medium not present
 > da3 at umass-sim0 bus 0 target 0 lun 3
 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da3: 1.000MB/s transfers
 > da3: Attempt to query device size failed: NOT READY, Medium not present
 > Trying to mount root from ufs:/dev/md0
 > Waiting (max 60 seconds) for system process `vnlru' to stop...done
 > Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
 > Waiting (max
 >  S6y0n csiencgo nddiss)k sf,o rv nsoydsetse mr epmraoicneisnsg .`.s.ynce9r '
 > to stop...9 4 0 0 0 done
 > All buffers synced.
 > Copyright (c) 1992-2008 The FreeBSD Project.
 > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 > 	The Regents of the University of California. All rights reserved.
 > FreeBSD is a registered trademark of The FreeBSD Foundation.
 > FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13 UTC 2008
 >     root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 > Timecounter "i8254" frequency 1193182 Hz quality 0
 > CPU: Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz (2666.77-MHz K8-class
 > CPU)
 >   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
 >
 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 >   Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
 >   AMD Features=0x20100800<SYSCALL,NX,LM>
 >   AMD Features2=0x1<LAHF>
 >   Cores per package: 4
 > usable memory = 4280983552 (4082 MB)
 > avail memory  = 4119531520 (3928 MB)
 > ACPI APIC Table: <A_M_I_ OEMAPIC >
 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 >  cpu0 (BSP): APIC ID:  0
 >  cpu1 (AP): APIC ID:  1
 >  cpu2 (AP): APIC ID:  2
 >  cpu3 (AP): APIC ID:  3
 > ioapic0 <Version 2.0> irqs 0-23 on motherboard
 > kbd1 at kbdmux0
 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 > acpi0: <A_M_I_ OEMXSDT> on motherboard
 > acpi0: [ITHREAD]
 > acpi0: Power Button (fixed)
 > acpi0: reservation of 0, a0000 (3) failed
 > acpi0: reservation of 100000, cff00000 (3) failed
 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
 > acpi0
 > Timecounter "HPET" frequency 14318180 Hz quality 900
 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 > pci0: <ACPI PCI bus> on pcib0
 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
 > pci1: <ACPI PCI bus> on pcib1
 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
 > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on
 > pci1
 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device
 > 26.0 on pci0
 > uhci0: [GIANT-LOCKED]
 > uhci0: [ITHREAD]
 > usb0: <UHCI (generic) USB controller> on uhci0
 > usb0: USB revision 1.0
 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 > uhub0: 2 ports with 2 removable, self powered
 > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device
 > 26.1 on pci0
 > uhci1: [GIANT-LOCKED]
 > uhci1: [ITHREAD]
 > usb1: <UHCI (generic) USB controller> on uhci1
 > usb1: USB revision 1.0
 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
 > uhub1: 2 ports with 2 removable, self powered
 > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device
 > 26.2 on pci0
 > uhci2: [GIANT-LOCKED]
 > uhci2: [ITHREAD]
 > usb2: <UHCI (generic) USB controller> on uhci2
 > usb2: USB revision 1.0
 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
 > uhub2: 2 ports with 2 removable, self powered
 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18
 > at device 26.7 on pci0
 > ehci0: [GIANT-LOCKED]
 > ehci0: [ITHREAD]
 > usb3: EHCI version 1.0
 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0
 > usb3: USB revision 2.0
 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
 > uhub3: 6 ports with 6 removable, self powered
 > pci0: <multimedia> at device 27.0 (no driver attached)
 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
 > pci3: <ACPI PCI bus> on pcib2
 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
 > pci2: <ACPI PCI bus> on pcib3
 > atapci0: <Marvell ATA controller> port
 > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem
 > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
 > atapci0: [ITHREAD]
 > ata2: <ATA channel 0> on atapci0
 > ata2: [ITHREAD]
 > ata3: <ATA channel 1> on atapci0
 > ata3: [ITHREAD]
 > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device
 > 29.0 on pci0
 > uhci3: [GIANT-LOCKED]
 > uhci3: [ITHREAD]
 > usb4: <UHCI (generic) USB controller> on uhci3
 > usb4: USB revision 1.0
 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
 > uhub4: 2 ports with 2 removable, self powered
 > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device
 > 29.1 on pci0
 > uhci4: [GIANT-LOCKED]
 > uhci4: [ITHREAD]
 > usb5: <UHCI (generic) USB controller> on uhci4
 > usb5: USB revision 1.0
 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
 > uhub5: 2 ports with 2 removable, self powered
 > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device
 > 29.2 on pci0
 > uhci5: [GIANT-LOCKED]
 > uhci5: [ITHREAD]
 > usb6: <UHCI (generic) USB controller> on uhci5
 > usb6: USB revision 1.0
 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
 > uhub6: 2 ports with 2 removable, self powered
 > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23
 > at device 29.7 on pci0
 > ehci1: [GIANT-LOCKED]
 > ehci1: [ITHREAD]
 > usb7: EHCI version 1.0
 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6
 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1
 > usb7: USB revision 2.0
 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
 > uhub7: 6 ports with 6 removable, self powered
 > uhub7: port 6, set config at addr 2 failed
 > uhub7: device problem (INVAL), disabling port 6
 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 > pci4: <ACPI PCI bus> on pcib4
 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem
 > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
 > miibus0: <MII bus> on xl0
 > xlphy0: <3Com internal media interface> PHY 24 on miibus0
 > xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > xl0: Ethernet address: 00:10:5a:69:26:6b
 > xl0: [ITHREAD]
 > pci4: <multimedia, video> at device 1.0 (no driver attached)
 > pci4: <multimedia> at device 1.1 (no driver attached)
 > isab0: <PCI-ISA bridge> at device 31.0 on pci0
 > isa0: <ISA bus> on isab0
 > atapci1: <Intel ICH9 SATA300 controller> port
 > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f
 > irq 22 at device 31.2 on pci0
 > atapci1: [ITHREAD]
 > ata4: <ATA channel 0> on atapci1
 > ata4: [ITHREAD]
 > ata5: <ATA channel 1> on atapci1
 > ata5: [ITHREAD]
 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 > atapci2: <Intel ICH9 SATA300 controller> port
 > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f
 > irq 22 at device 31.5 on pci0
 > atapci2: [ITHREAD]
 > ata6: <ATA channel 0> on atapci2
 > ata6: [ITHREAD]
 > ata7: <ATA channel 1> on atapci2
 > ata7: [ITHREAD]
 > acpi_button0: <Power Button> on acpi0
 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
 > acpi0
 > fdc0: [FILTER]
 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
 > acpi0
 > sio0: type 16550A
 > sio0: [FILTER]
 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 > atkbd0: <AT Keyboard> irq 1 on atkbdc0
 > kbd0 at atkbd0
 > atkbd0: [GIANT-LOCKED]
 > atkbd0: [ITHREAD]
 > cpu0: <ACPI CPU> on acpi0
 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F,
 > should be 76 [20070320]
 > est0: <Enhanced SpeedStep Frequency Control> on cpu0
 > p4tcc0: <CPU Frequency Thermal Control> on cpu0
 > cpu1: <ACPI CPU> on acpi0
 > est1: <Enhanced SpeedStep Frequency Control> on cpu1
 > p4tcc1: <CPU Frequency Thermal Control> on cpu1
 > cpu2: <ACPI CPU> on acpi0
 > est2: <Enhanced SpeedStep Frequency Control> on cpu2
 > p4tcc2: <CPU Frequency Thermal Control> on cpu2
 > cpu3: <ACPI CPU> on acpi0
 > est3: <Enhanced SpeedStep Frequency Control> on cpu3
 > p4tcc3: <CPU Frequency Thermal Control> on cpu3
 > ppc0: cannot reserve I/O port range
 > sc0: <System console> at flags 0x100 on isa0
 > sc0: VGA <16 virtual consoles, flags=0x300>
 > sio1: configured irq 3 not in bitmap of probed irqs 0
 > sio1: port may not be enabled
 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > ums0: 16 buttons and Z dir.
 > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
 > Timecounters tick every 1.000 msec
 > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
 > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
 > SMP: AP CPU #1 Launched!
 > SMP: AP CPU #3 Launched!
 > SMP: AP CPU #2 Launched!
 > da0 at umass-sim0 bus 0 target 0 lun 0
 > da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da0: 1.000MB/s transfers
 > da0: Attempt to query device size failed: NOT READY, Medium not present
 > da1 at umass-sim0 bus 0 target 0 lun 1
 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da1: 1.000MB/s transfers
 > da1: Attempt to query device size failed: NOT READY, Medium not present
 > da2 at umass-sim0 bus 0 target 0 lun 2
 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da2: 1.000MB/s transfers
 > da2: Attempt to query device size failed: NOT READY, Medium not present
 > da3 at umass-sim0 bus 0 target 0 lun 3
 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da3: 1.000MB/s transfers
 > da3: Attempt to query device size failed: NOT READY, Medium not present
 > GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
 > Trying to mount root from ufs:/dev/ad8s1a
 > Copyright (c) 1992-2008 The FreeBSD Project.
 > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 > 	The Regents of the University of California. All rights reserved.
 > FreeBSD is a registered trademark of The FreeBSD Foundation.
 > FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13 UTC 2008
 >     root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 > Timecounter "i8254" frequency 1193182 Hz quality 0
 > CPU: Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz (2666.78-MHz K8-class
 > CPU)
 >   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
 >
 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 >   Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
 >   AMD Features=0x20100800<SYSCALL,NX,LM>
 >   AMD Features2=0x1<LAHF>
 >   Cores per package: 4
 > usable memory = 4280983552 (4082 MB)
 > avail memory  = 4119531520 (3928 MB)
 > ACPI APIC Table: <A_M_I_ OEMAPIC >
 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 >  cpu0 (BSP): APIC ID:  0
 >  cpu1 (AP): APIC ID:  1
 >  cpu2 (AP): APIC ID:  2
 >  cpu3 (AP): APIC ID:  3
 > ioapic0 <Version 2.0> irqs 0-23 on motherboard
 > kbd1 at kbdmux0
 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 > acpi0: <A_M_I_ OEMXSDT> on motherboard
 > acpi0: [ITHREAD]
 > acpi0: Power Button (fixed)
 > acpi0: reservation of 0, a0000 (3) failed
 > acpi0: reservation of 100000, cff00000 (3) failed
 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
 > acpi0
 > Timecounter "HPET" frequency 14318180 Hz quality 900
 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 > pci0: <ACPI PCI bus> on pcib0
 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
 > pci1: <ACPI PCI bus> on pcib1
 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
 > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on
 > pci1
 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device
 > 26.0 on pci0
 > uhci0: [GIANT-LOCKED]
 > uhci0: [ITHREAD]
 > usb0: <UHCI (generic) USB controller> on uhci0
 > usb0: USB revision 1.0
 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 > uhub0: 2 ports with 2 removable, self powered
 > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device
 > 26.1 on pci0
 > uhci1: [GIANT-LOCKED]
 > uhci1: [ITHREAD]
 > usb1: <UHCI (generic) USB controller> on uhci1
 > usb1: USB revision 1.0
 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
 > uhub1: 2 ports with 2 removable, self powered
 > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device
 > 26.2 on pci0
 > uhci2: [GIANT-LOCKED]
 > uhci2: [ITHREAD]
 > usb2: <UHCI (generic) USB controller> on uhci2
 > usb2: USB revision 1.0
 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
 > uhub2: 2 ports with 2 removable, self powered
 > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18
 > at device 26.7 on pci0
 > ehci0: [GIANT-LOCKED]
 > ehci0: [ITHREAD]
 > usb3: EHCI version 1.0
 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0
 > usb3: USB revision 2.0
 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
 > uhub3: 6 ports with 6 removable, self powered
 > umass0: <TOSHIBA TransMemory, class 0/0, rev 2.00/1.10, addr 2> on uhub3
 > pci0: <multimedia> at device 27.0 (no driver attached)
 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
 > pci3: <ACPI PCI bus> on pcib2
 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
 > pci2: <ACPI PCI bus> on pcib3
 > atapci0: <Marvell ATA controller> port
 > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem
 > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2
 > atapci0: [ITHREAD]
 > ata2: <ATA channel 0> on atapci0
 > ata2: [ITHREAD]
 > ata3: <ATA channel 1> on atapci0
 > ata3: [ITHREAD]
 > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device
 > 29.0 on pci0
 > uhci3: [GIANT-LOCKED]
 > uhci3: [ITHREAD]
 > usb4: <UHCI (generic) USB controller> on uhci3
 > usb4: USB revision 1.0
 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
 > uhub4: 2 ports with 2 removable, self powered
 > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device
 > 29.1 on pci0
 > uhci4: [GIANT-LOCKED]
 > uhci4: [ITHREAD]
 > usb5: <UHCI (generic) USB controller> on uhci4
 > usb5: USB revision 1.0
 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
 > uhub5: 2 ports with 2 removable, self powered
 > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device
 > 29.2 on pci0
 > uhci5: [GIANT-LOCKED]
 > uhci5: [ITHREAD]
 > usb6: <UHCI (generic) USB controller> on uhci5
 > usb6: USB revision 1.0
 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
 > uhub6: 2 ports with 2 removable, self powered
 > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23
 > at device 29.7 on pci0
 > ehci1: [GIANT-LOCKED]
 > ehci1: [ITHREAD]
 > usb7: EHCI version 1.0
 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6
 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1
 > usb7: USB revision 2.0
 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
 > uhub7: 6 ports with 6 removable, self powered
 > uhub7: port 6, set config at addr 2 failed
 > uhub7: device problem (INVAL), disabling port 6
 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 > pci4: <ACPI PCI bus> on pcib4
 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem
 > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4
 > miibus0: <MII bus> on xl0
 > xlphy0: <3Com internal media interface> PHY 24 on miibus0
 > xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > xl0: Ethernet address: 00:10:5a:69:26:6b
 > xl0: [ITHREAD]
 > pci4: <multimedia, video> at device 1.0 (no driver attached)
 > pci4: <multimedia> at device 1.1 (no driver attached)
 > isab0: <PCI-ISA bridge> at device 31.0 on pci0
 > isa0: <ISA bus> on isab0
 > atapci1: <Intel ICH9 SATA300 controller> port
 > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f
 > irq 22 at device 31.2 on pci0
 > atapci1: [ITHREAD]
 > ata4: <ATA channel 0> on atapci1
 > ata4: [ITHREAD]
 > ata5: <ATA channel 1> on atapci1
 > ata5: [ITHREAD]
 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 > atapci2: <Intel ICH9 SATA300 controller> port
 > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f
 > irq 22 at device 31.5 on pci0
 > atapci2: [ITHREAD]
 > ata6: <ATA channel 0> on atapci2
 > ata6: [ITHREAD]
 > ata7: <ATA channel 1> on atapci2
 > ata7: [ITHREAD]
 > acpi_button0: <Power Button> on acpi0
 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
 > acpi0
 > fdc0: [FILTER]
 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
 > acpi0
 > sio0: type 16550A
 > sio0: [FILTER]
 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 > atkbd0: <AT Keyboard> irq 1 on atkbdc0
 > kbd0 at atkbd0
 > atkbd0: [GIANT-LOCKED]
 > atkbd0: [ITHREAD]
 > cpu0: <ACPI CPU> on acpi0
 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  7F,
 > should be 76 [20070320]
 > est0: <Enhanced SpeedStep Frequency Control> on cpu0
 > p4tcc0: <CPU Frequency Thermal Control> on cpu0
 > cpu1: <ACPI CPU> on acpi0
 > est1: <Enhanced SpeedStep Frequency Control> on cpu1
 > p4tcc1: <CPU Frequency Thermal Control> on cpu1
 > cpu2: <ACPI CPU> on acpi0
 > est2: <Enhanced SpeedStep Frequency Control> on cpu2
 > p4tcc2: <CPU Frequency Thermal Control> on cpu2
 > cpu3: <ACPI CPU> on acpi0
 > est3: <Enhanced SpeedStep Frequency Control> on cpu3
 > p4tcc3: <CPU Frequency Thermal Control> on cpu3
 > ppc0: cannot reserve I/O port range
 > sc0: <System console> at flags 0x100 on isa0
 > sc0: VGA <16 virtual consoles, flags=0x300>
 > sio1: configured irq 3 not in bitmap of probed irqs 0
 > sio1: port may not be enabled
 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > ums0: 16 buttons and Z dir.
 > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
 > uhub2
 > umass1: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5
 > Timecounters tick every 1.000 msec
 > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150
 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System.
 > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150
 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300
 > GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
 > SMP: AP CPU #3 Launched!
 > SMP: AP CPU #2 Launched!
 > SMP: AP CPU #1 Launched!
 > da0 at umass-sim0 bus 0 target 0 lun 0
 > da0: <TOSHIBA TransMemory 5.00> Removable Direct Access SCSI-0 device
 > da0: 40.000MB/s transfers
 > da0: 3823MB (7830528 512 byte sectors: 255H 63S/T 487C)
 > da1 at umass-sim1 bus 1 target 0 lun 0
 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da1: 1.000MB/s transfers
 > da1: Attempt to query device size failed: NOT READY, Medium not present
 > da2 at umass-sim1 bus 1 target 0 lun 1
 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da2: 1.000MB/s transfers
 > da2: Attempt to query device size failed: NOT READY, Medium not present
 > da3 at umass-sim1 bus 1 target 0 lun 2
 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da3: 1.000MB/s transfers
 > da3: Attempt to query device size failed: NOT READY, Medium not present
 > da4 at umass-sim1 bus 1 target 0 lun 3
 > da4: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device
 > da4: 1.000MB/s transfers
 > da4: Attempt to query device size failed: NOT READY, Medium not present
 > GEOM_LABEL: Label for provider da0s1 is msdosfs/4GB.
 > Trying to mount root from ufs:/dev/ad8s1a
 > WARNING: / was not properly dismounted
 > WARNING: /tmp was not properly dismounted
 > /tmp: mount pending error: blocks 0 files 1
 > WARNING: /usr was not properly dismounted
 > WARNING: /var was not properly dismounted
 > /var: mount pending error: blocks 4 files 2
 > GEOM_LABEL: Label msdosfs/4GB removed.
 >
 >>How-To-Repeat:
 > Install everyting (+X) from dvd -> startx -> logout -> startx
 >
 >>Fix:
 >
 >
 >>Release-Note:
 >>Audit-Trail:
 >>Unformatted:
 > _______________________________________________
 > freebsd-bugs@freebsd.org mailing list
 > http://lists.freebsd.org/mailman/listinfo/freebsd-bugs
 > To unsubscribe, send any mail to "freebsd-bugs-unsubscribe@freebsd.org"
 >

From: "Garrett Cooper" <yanefbsd@gmail.com>
To: "Benjamin Stuppin" <benjamin_stuppin@yahoo.de>
Cc: bug-followup@freebsd.org
Subject: Re: misc/130103: 7.1-RC X -> systemcrash
Date: Sat, 3 Jan 2009 11:46:26 -0800

 On Sat, Jan 3, 2009 at 5:56 AM, Benjamin Stuppin
 <benjamin_stuppin@yahoo.de> wrote:
 > Hi,
 > updated my BIOS tody but it didn't help. :(
 >
 > Tried 7.1-RC* (amd64 and i386 for now) also 8-CURRENT without success. The ACPI-Error in dmesg also still occurs.
 >
 > Well maybe i'll give my RHD3450 a try when I'm back at home (really would prefer the r5xx Card *g*) tomorrow. A guy who wrote to my (also using the same hardware only using a RHD3450 had the same Problem but his system runs fine when he selects the ati-driver so maybe it's really a problem with the graphics adapter/drivers. I'm only wondering why 7-RELEASE runs fine.
 >
 > 7.1-RC2 i386 doesn't result in a systemcrash, it ends up in a automatic soft reboot.
 >
 > Have Fun
 > Ben
 
     The ACPI error I've seen -- AFAIK -- is benign on my ASUS boards
 even though it occurs.
     The behavior that you're seeing is odd though -_-... let's keep
 the bug list in the loop though so someone knows that there's
 definitely an issue with certain ATI cards on CURRENT that needs to be
 worked out.
     Two other things we should try:
     1. Use another video driver (vesa for instance) in X.org and see
 if it still occurs.
     2. Compile DDB and WITNESS support into your kernel and attach DDB
 prior to starting X11, then start X11 and see if you can break the
 kernel prior to the reboot (most likely the reboot is a panic and a
 kernel coredump attempt that fails). How large is your swap partition?
     3. Try out PCBSD (fibonacci version -- based off of FreeBSD 7.1
 RC1 I believe) and see if it occurs there.
     Oh and by the way the CURRENT dmesg you sent me before was empty :).
 Thanks,
 -Garrett
State-Changed-From-To: open->feedback 
State-Changed-By: vwe 
State-Changed-When: Sun Jan 4 16:04:35 UTC 2009 
State-Changed-Why:  
Benjamin, 
to me it appears you've mixed arch binaries on your system. 
I'm wondering if your issue is still valid if you clean up 
your system (with binaries of the same $arch)? 
Remember to rebuild ports if you're changing $arch. 
Also please clarify if you're seeing system crashes (panic) 
or a hanging system. 
For a panic, we need a backtrace in the first place, for a  
hanging system I recommend to rebuild kernel using 
WITNESS. 


Responsible-Changed-From-To: freebsd-amd64->vwe 
Responsible-Changed-By: vwe 
Responsible-Changed-When: Sun Jan 4 16:04:35 UTC 2009 
Responsible-Changed-Why:  
track 

http://www.freebsd.org/cgi/query-pr.cgi?pr=130103 
State-Changed-From-To: feedback->closed 
State-Changed-By: vwe 
State-Changed-When: Sun Aug 8 20:23:07 UTC 2010 
State-Changed-Why:  
unknown issue, no feedback 

http://www.freebsd.org/cgi/query-pr.cgi?pr=130103 
>Unformatted:
