![]()
Mainpage
Searchform
History
Versions
Categories
Contents
Deutsch
/dev/sda3 for the root partition here.
Attention ! This partition must respect the
1024 cylinder limitation (1024_Zylinder.html) !
/dos)
/dev/sda3),
not into the MBR ! (You can nevertheless configure a choice
of different Linux kernel-images for LILO). You can do this with the following
/etc/lilo.conf :
# LILO configuration file
# Start LILO global Section
boot=/dev/sda3 # where LILO should be installed to
backup=/boot/boot.sda3.970428 # Backup of the previous bootsector
prompt
timeout=100 # wait at prompt: 10 s
vga = normal # force sane state
# End LILO global section
# Linux bootable partition config begins
image = /vmlinuz # default image to boot
root = /dev/sda3 # root-partition is here!
label = Linux
# Linux bootable partition config ends
# Name other Linux kernel images here:
# ...
Install LILO as usual :
# /sbin/lilo
dd if=/dev/sda3 bs=512 count=1 of=/dosen/bootsek.lin
boot.ini (set attributes)
c:\bootsek.lin="Linux"
![]()
See also:
Installing Linux,DOS,Windows,WindowsNT onto one hard disk
Linux above 1024 cylinders and LILO![]()
Keywords: WINNT, NT, WIN, WINDOWS, PARTITIONTYPE, 82, 83, PARTITONS, OS, OPERATING SYSTEM
![]()
Categories:
Other Operating Systems
![]()
Mainpage
Searchform
History
Versions
Categories
Contents
Deutsch