NEWS: Summary of changes in kcd
===============================

Changes in Version 6.11.0 from 6.9.0
(Apr 25, 2003)

	- Fuzzy directory searching (Contributed by Robert Sandilands).
	- Fix directory display bug when directory contains control
	  characters.
	- Improve handling of symbolic links that point outside saved tree.
	- Add vi and emacs key binding mode.
	- Fix handling of escape sequences in StartDir/SkipDir
	  configuration.
	- New configuration commands: FuzzySize, KeyBinding.
	- Terminal processing of Ctrl-S, Ctrl-Q as stop/continue key is
	  turned off.

------------------------------------------------------------------------------

Changes in Version 6.4.2 from 6.4.1
(Apr 13, 2003)

	- Fix directory display bug when directory contains control
	  characters.
	- Display new directory in case of multiple match.

------------------------------------------------------------------------------

Changes in Version 6.9.0 from 6.7.1
(Apr 7, 2003)

	- Fix bookmark matching.
	- Prevent adding duplicate directory in bookmark.
	- Display new directory in case of multiple match.
	- The option `-bx' now issue a warning about deprecation since
	  now the bookmark information is stored in `~/.kcd.bookmark.*'.
	  It will be removed in the next kcd release.

------------------------------------------------------------------------------

Changes in Version 6.7.1 from 6.7.0
(Feb 27, 2003)

	- Fix a segmentation fault during directory display.
	- Fix a bug in configure script where stream I/O for string class
	  is not properly detected.

------------------------------------------------------------------------------

Changes in Version 6.7.0 from 6.5.3
(Feb 23, 2003)

	- Bookmark information is completely removed from directory tree
	  file.  Now kcd relies on `~/.kcd.bookmark.*' for bookmark
	  information.  So there is no longer loss of bookmarks problem.
	  Bookmark feature also works faster now.
	- Fix a bug in configure script where the mouse support status is
	  not properly displayed.
	- Support GCC 3.3.

------------------------------------------------------------------------------

Changes in Version 6.5.3 from 6.5.2
(Jan 18, 2003)

	- Fix directory jump bug when the current directory also matches
	  the search string.

------------------------------------------------------------------------------

Changes in Version 6.5.2 from 6.5.1
(Dec 6, 2002)

	- Add -bx option.  All user of 6.5.0 and 6.5.1 who uses bookmark
	  feature should run `kcd -bx' once after installation.  This will
	  prevent loss of bookmarks in certain cases such as full rescan, 
	  or upgrading to kcd that uses a different directory tree file
	  format.
	- KCD_BOOKMARK environment variable is introduced for suid kcd
	  applications.

------------------------------------------------------------------------------

Changes in Version 6.5.1 from 6.5.0
(Nov 11, 2002)

	- Improve kcd-inst script to update KCD_INIT variable.

------------------------------------------------------------------------------

Changes in Version 6.4.1 from 6.4.0
(Nov 11, 2002)

	- Improve kcd-inst script to update KCD_INIT variable.

------------------------------------------------------------------------------

Changes in Version 6.5.0 from 6.4.0
(Nov 9, 2002)

	- New directory tree file format.  kcd will rescan automatically at
	  the first run.
	- Add bookmark feature.

------------------------------------------------------------------------------

Changes in Version 6.4.0 from 6.3.0
(Nov 3, 2002)

	- Fix a directory file reading/writing bug.

------------------------------------------------------------------------------

Changes in Version 6.3.0 from 6.1.1
(Oct 18, 2002)

	- Add configuration profile.

------------------------------------------------------------------------------

Changes in Version 6.1.1 from 6.1.0
(Sep 15, 2002)

	- Fix new exception specification portability issues.
	- Fix autoconf 2.53 test problems.

------------------------------------------------------------------------------

Changes in Version 6.1.0 from 6.0.0
(Sep 11, 2002)

	- Update to autoconf 2.53.
	- Update to gettext 0.11.3.
	- Fix default function argument related compilation problems.

------------------------------------------------------------------------------

Changes in Version 6.0.0 from 5.13.0
(Jun 2, 2002)

	- Improve ncurses bool workaround logic.
	- Various portability fixes.

------------------------------------------------------------------------------

Changes in Version 5.13.0 from 5.11.0
(May 10, 2002)

	- Fix '+' display bug.
	- Implement combining character input in Find mode.
	- --disable-mouse option added to configure.
	- Display ^F status.
	- Fix i18n message generation bug.
	- Fix portability problems on Solaris 8.

------------------------------------------------------------------------------

Changes in Version 5.11.0 from 5.9.0
(May 6, 2002)

	- Fix symlink jumping bug.
	- Fix page down bug on some systems.
	- Improve scanning speed on system supporting d_type.
	- Improve highlight moving logic.
	- Rewrite Unicode support to work with combining characters.

------------------------------------------------------------------------------

Changes in Version 5.9.0 from 5.7.0
(May 3, 2002)

	- Shell startup files are no longer modified during make install
	  or make installuser.
	- User-specific installation mode removed.  Set --prefix option
	  during configure to inside your home directory instead.
	- Improved display speed.
	- Workaround strftime configure problem on Solaris 8.
	- Fix portability bug in editbox.cc.
	- Fix blinking problem in status bar.

------------------------------------------------------------------------------

Changes in Version 5.7.2 from 5.7.1
(May 1, 2002)

	- Fix portability bug in editbox.cc.

------------------------------------------------------------------------------

Changes in Version 5.7.1 from 5.7.0
(Apr 27, 2002)

	- Workaround strftime configure problem on Solaris 8.
	- Fix buffer.cc compilation problem.

------------------------------------------------------------------------------

Changes in Version 5.7.0 from 5.5.1
(Jul 7, 2001)

	- Support FHS standard by default.  If configure detect FHS
	  directory structure, the following are changes to kcd behavior
	  - Man page is installed in /usr/share/man/en/man1
	    or /opt/.../share/man/en/man1.
	  - kcd looks for the global configuration file kcd.conf in /etc 
	    or /etc/opt/...
	- kcd only now looks for kcd.conf in SYSCONFDIR instead of /etc,
	  /usr/etc and /usr/local/etc.
	  (based on the changes in FreeBSD port of kcd by FreeBSD people.)  
	- Fix <malloc.h> header portability.
	  (based on the changes in FreeBSD port of kcd by FreeBSD people.)  
	- Reorganize INSTALL documentation.
	- Modify ~/.bashrc, ~/.cshrc and ~/.zshrc instead of ~/.profile,
	  ~/.login and ~/.zprofile during user-specific installation.
	  In case user's login shell is ash, ~/.profile is still modified.
	- New kcd-inst program that modify ~/.bashrc, ~/.cshrc, ~/.zshrc or
	  ~/.profile after installation.  This is useful for system-wide
	  installation.
	- Support GCC 3.0.

------------------------------------------------------------------------------

Changes in Version 5.0.3 from 5.0.2
(May 6, 2001)

	- Support GCC 3.0.

------------------------------------------------------------------------------

Changes in Version 5.5.1
(Oct 8, 2000)

	- Fix control key processing in find edit box.

------------------------------------------------------------------------------

Changes in Version 5.5.0
(Sep 15, 2000)

	- Bad StartDir, SkipDir commands no longer terminate kcd via
	  internal error message.
	- UTF-8 support status in --features now reports compile time
	  status.
	- Various code reorganization.

------------------------------------------------------------------------------

Changes in Version 5.3.3
(Sep 8, 2000)

	- Various RPM spec file enhancements from Max Heijndijk.
	- RPM, SRPM now contains locale support.

------------------------------------------------------------------------------

Changes in Version 5.3.2
(Sep 8, 2000)

	- Bug fix - problem locating locale directory.

------------------------------------------------------------------------------

Changes in Version 5.3.1
(Sep 7, 2000)

	- Bug fix - en_GB.po message file was incorrectly named.

------------------------------------------------------------------------------

Changes in Version 5.3.0 from 5.1.2
(Sep 7, 2000)

	- Option --enable-wide-chars and --with-included-gettext
	  really work now.
	- Smart scan now works properly when StartDir in the configuration
	  changes.
	- Security checks support for sudo, suid uses.
	- Some code reorganization.
	- Bug fix - information in directory list screen is not displayed.
	- Bug fix - junk characters may appear before the first directory
	  in the directory tree window.
	- Bug fix - some 5 bytes multibyte sequence is not correctly
	  decoded.

------------------------------------------------------------------------------

Changes in Version 5.1.3
(Aug 28, 2000)

	- Update for autodep 1.1.3.
	- Rename configure option --enable-wide-char to
	  --enable-wide-chars to match xterm.
	- Can build on system without msgfmt.

------------------------------------------------------------------------------

Changes in Version 5.1.2
(Aug 27, 2000)

	- Update for CVS version of autoconf (autoconf 2.49a).

------------------------------------------------------------------------------

Changes in Version 5.1.1
(Aug 22, 2000)

	- Fix problems with --with-included-gettext.

------------------------------------------------------------------------------

Changes in Version 5.1.0 from 5.0.0
(Aug 20, 2000)

	- Fix a bug that can cause infinite loop.
	- Check environment locale.
	- Speedup command of the form `kcd dir' where the number of
	  directories that matches `dir' is no more than ShowListThreshold.
	  This is even faster than before gettext changes.
	- Add gettext infrastructure.
	- Add Unicode infrastructure.
	- Correct display problem with control characters.

------------------------------------------------------------------------------

Changes in Version 5.0.2 from 5.0.1
(Aug 19, 2000)

	- Fix insert/overtype status update.
	- Display control codes as ? on the screen.

------------------------------------------------------------------------------

Changes in Version 5.0.1 from 5.0.0
(Aug 12, 2000)

	- Fix an infinite loop.

------------------------------------------------------------------------------

Changes in Version 5.0.0
(Aug 11, 2000)

	- Changes of variable type to work with 64-bit CPUs.
	- Flag -W is used to compile under GCC.
	- Multiple -rp options allowed.
	- Add more malloc test.  Program default is no test performed
	  unless --enable-debug-memory is given to configure.
	- Fix directory name lookup of the form `~user'.

------------------------------------------------------------------------------

Changes in Version 4.18.0
(Aug 4, 2000)

	- Update timestamp when the directory previously skipped is no longer
	  in SkipDir.
	- Fix various memory leak.
	- Fix directory tree header check.
	- Abort when flags in the directory tree are invalid.
	- More errors are reported during directory scanning.
	- Add --enable/disable-debug-memory to turn on/off memory checks to
	  configure script.

------------------------------------------------------------------------------

Changes in Version 4.17.4
(Jun 4, 2000)

	- Weaken malloc test to work around GCC stack unwinding bug.

------------------------------------------------------------------------------

Changes in Version 4.17.3
(Jun 3, 2000)

	- Fix new directories test logic in smart scan.
	- As a result of bug fixes, kcd is forced to rescan automatically
	  upon the first run to fix possible errors in previously saved
	  directory tree.

------------------------------------------------------------------------------

Changes in Version 4.17.2
(Jun 1, 2000)

	- Always dump core in the directory kcd was invoked.
	- Fix errors in BUGREPORT.

------------------------------------------------------------------------------

Changes in Version 4.17.1
(May 29, 2000)

	- Detect malloc errors.  May not compile on some OS.

------------------------------------------------------------------------------

Changes in Version 4.17.0
(May 27, 2000)

	- Color settings can accept default background color.
	- DefaultBackground configuration command added.
	- More documentation in SGML format.
	- Detect certain errors that cause kcd to allocate too much memory.

------------------------------------------------------------------------------

Changes in Version 4.16.1
(Mar 16, 2000)

	- Work with zlib older than 1.0.6.
	- Bug fix in configure check for ncurses bool size.
	- Use $HOME environment variable if home directory lookup using
	  passwd entry fails.

------------------------------------------------------------------------------

Changes in Version 4.16.0
(Mar 10, 2000)

	- Fix window resize bug introduced in 4.15.1.
	- Add configuration commands for color settings.

------------------------------------------------------------------------------

Changes in Version 4.15.1
(Mar 8, 2000)

	- Fix a line drawing bug in directory tree mode.

------------------------------------------------------------------------------

Changes in Version 4.15.0
(Mar 8, 2000)

	- Multiple rescanning options can be combined.  For example, you can
	  now write `kcd -rfq' instead of `kcd -rf -rq'.
	- New option -rp DIR for scanning part of directory tree beginning 
	  at DIR.
	- Configuration command QuietPartialScan is now documented.
	- Invalid command line now triggers error message instead of help.
	- Fix a bug that make QuietSmartScan status be ignored.

------------------------------------------------------------------------------

Changes in Version 4.14.0
(Feb 28, 2000)

	- Change configuration file read order to
	  /etc/kcd.conf -> /usr/etc/kcd.conf -> /usr/local/etc/kcd.conf
	    -> ~/.kcd.conf.
	- Some code reorganization.

------------------------------------------------------------------------------

Changes in Version 4.13.0
(Feb 15, 2000)

	- Read kcd.conf in /usr/local/etc and /usr/etc.
	- Add --config option.
	- Add spec file for building RPM files.
	- No longer install /etc/profile.d/kcd.zsh.
	- Add GlobDot and GlobPath configuration command.
	- SkipDir, ClearSkipDir, ClearStartDir accepts wildcards.
	- Old-style SkipDir syntax is now depreciated.  A warning message
	  will be printed on the screen if such command is found.
	- New file format.  kcd is forced to rescan automatically at the first
	  run.
	- Update email address and program home page.
	- Major code reorganization.
	- More changes toward ISO C++ standard.

------------------------------------------------------------------------------

Changes in Version 4.11.2
(Jan 11, 2000)

	- Detect and provide work-around for ncurses that is not compiled 
	  to support C++ during configure.

------------------------------------------------------------------------------

Changes in Version 4.11.1 from 4.11.0
(Aug 31, 1999)

	- Fix symbolic link display and select bug.
	- Minor changes to kcd.sh.* and kcd.csh.* and document about
	  LD_LIBRARY_PATH and TERMINFO environment variables in 
	  the troubleshooting section of INSTALL.
	- Update to work with zlib 1.0.6 or newer.

------------------------------------------------------------------------------

Changes in Version 4.11.0 from 4.7.9
(Mar 27, 1999)

	- Update for Redhat 5.2 which uses an ncurses pre-5.0 snapshot.
	- Update for autoconf 2.13.
	- More changes toward ISO C++ standard.
	- This requires at least gcc-2.8.0 or egcs-1.0 to compile.
	- Fix a bug when all StartDir directories are cleared by
	  ClearStartDir, previous versions of kcd does not scan any directory.
	  Now kcd does as if there is no StartDir commands.
	- Fix a bug when duplicate directories are given to SkipDir using
	  old-style syntax.
	- Fix error report when root directory are given to SkipDir using
	  old-style syntax.
	- Better up/down key navigation - When there are multiple directories
	  directly above/below the current directory, the one with more
	  overlap extent is chosen rather than the first one found.
	- Pressing up/down in find mode do not center the match directory
	  if it is visible on the screen before searching.
	- Directory that no longer exists are automatically
	  skipped when find using command line.
	- Improved system-wide installation process:
	    - Support installation into its own new directories 
	      (such as /package/kcd).
	    - The directory containing kcd programs is automatically added
	      to the PATH environment variable if it is not there.
	    - If /etc/profile.d exists, kcd alias/function initialization 
	      scripts are installed into /etc/profile.d.  This avoids
	      modifying /etc/profile, /etc/csh.login and /etc/zprofile.
	    - Works with parallel build.

------------------------------------------------------------------------------

Changes in Version 4.7.13
(Aug 5, 2000)

	- Works on IA-64 platform.
	- Update email and home page address in documentation.

------------------------------------------------------------------------------

Changes in Version 4.7.11
(Sep 5, 1999)

	- Update for zlib 1.0.6 and newer.
	- Make constant member data static.

------------------------------------------------------------------------------

Changes in Version 4.7.10
(Feb 13, 1999)

	- Update for Redhat 5.2 which uses an ncurses pre-5.0 snapshot.
	- Update for autoconf 2.13.

------------------------------------------------------------------------------

Changes in Version 4.7.9
(Feb 23, 1998)

	- Change the default behavior of scroll bar.  It is on for ncurses
	  version >= 4.2.
	- For system-wide installation, also modify /etc/zprofile if it
	  exists.
	- For user-specific installation, also modify ~/.zprofile if the
	  login shell is zsh.
	- Use gzip -f when compressing man page during `make install'.
	- Fix various documentation (README, kcd.1) errors.
	- End each C++ source file by a new line (as in C++ standard).

------------------------------------------------------------------------------

Changes in Version 4.7.8
(Jan 21, 1998)

	- Changed symbolic links are now updated when scanned in smart mode.
	- kcd now does not scan inside symbolic links given in `StartDir'.

------------------------------------------------------------------------------

Changes in Version 4.7.7
(Jan 19, 1998)

	- During configure, test if the ncurses library really has mouse 
	  functions.

------------------------------------------------------------------------------

Changes in Version 4.7.6
(Nov 23, 1997)

	- Fix a bug in configure script that always pick libncurses.a rather 
	  than libncurses.so when --with-static-ncurses is not given.
	- Changes to reflex the string library in libstdc++ found in egcs.

------------------------------------------------------------------------------

Changes in Version 4.7.5
(Nov 3, 1997)

	- New configure option --with-static-ncurses.  Using this option 
	  solves some kcd compilation problems related to old shared ncurses
	  libraries.  The default ncurses installation process only 
	  builds and installs static libraries, leaving shared
	  libraries from the old ncurses lying around.
	- Fix a small bug.  kcd fails to cycle through all matched directory 
	  if current directory is matched to the search string and
	  is the last directory in the tree.
	- Fix a bug in configure script.  operator delete test returns value 
	  when it shouldn't.
	- Fix Makefile.in, not all dependency was listed there.
	- Use libc/glibc strcasecmp and strncasecmp functions when they are 
	  available.
	- `make install' will install compressed version of kcd.1 if 
	  prefix/man/man1/*.gz exists.
	- `using namespace std;' supported.

------------------------------------------------------------------------------

Changes in Version 4.7.0
(Aug 10, 1997)

	- Symbolic links are shown using different color.
	- ClearStartDir, ClearSkipDir commands now accept directory name as 
	  the parameters.
	- Mouse support (experimental - just mouse click, no mouse drag yet).
	- New configuration command - `GraphicChar' determining whether 
	  PC line graphic chars or simple '-', '+', '|' chars are used.
	- More strict test of .kcd.save.gz.  This prevents kcd from 
	  segmentation fault when reading file created by previous 
	  versions of kcd which was compiled with different 
	  sizeof(mode_t) (caused when upgrading libc 5 to glibc 2).
	- Better control on scroll bars - they are hiden if not needed.
	- Pan left/right of highlight that is wider than screen enabled
	  via `,' and `.' keys.
	- New configuration command - `ScrollBar' to enable scroll bar display.
	  By default, scroll bars are hiden.  This will be changed 
	  in later versions once a new version of ncurses is released.
	  ncurses 4.1 and earlier version have a bug that causes 
	  the vertical scroll bar to flicker heavily during scrolling.
	- Improved configure script - several C++ features are tested.

------------------------------------------------------------------------------

Changes in Version 4.5.1
(Jul 23, 1997)

	- Remove various messages printed during directory scanning since they 
	  are intended only for debugging purpose.
	- Fix a segmentation fault when exiting kcd.
	- Program freezes when saved directory tree contains circular symbolic 
	  link fixed.

------------------------------------------------------------------------------

Changes in Version 4.5.0 from 4.0.1
(Jul 22, 1997)

	- Support symbolic link.
	- Automate dependency checks in Makefile.  (A Perl script, autodep, is
	  provided at ftp://kcd.sourceforge.net/pub/kcd/infrastructure/ to 
	  rebuild them.)
	- Automate version number, release date and file sizes info in 
	  README, CHANGES, kcd-?.?.?.lsm, kcd.1 and kcdmain.cc during
	  packaging.
	- Improve configure and Makefile to support srcdir option.  Object
	  and output files are properly placed in the desired
	  directory.
	- `-' used to igore error when installing man page.
	- Various hardcoded limits removed, such as max. configuration columns.
	- When unrecognized command is found in configuration file, kcd now
	  aborts immediately.
	- When the line that causes error in configuration is printed, any
	  control characters present will be shown as `.'.
	- Source files *.cpp renamed to *.cc.
	- Various fixes in comments in the header of *.h, *.cc.
	- New screen layout.
	- Detect window size and refuse to continue if window too small.
	- Works with all directory with special chars under bash-2.0.
	- Add scroll bars.
	- Highlighted directory is shown on the bottom bar.
	- Better Up/Down arrow key navigation.
	- Support symbolic link selection.

------------------------------------------------------------------------------

Changes in Version 4.0.2 from 4.0.1
(Aug 5, 1997)
	- New configuration command - `GraphicChar' determining whether 
	  PC line graphic chars or simple '-', '+', '|' chars are used.
	- More strict test of .kcd.save.gz.  This prevents kcd from 
	  segmentation fault when reading file created by previous 
	  versions of kcd which was compiled with different 
	  sizeof(mode_t) (caused when upgrading libc 5 to glibc 2).
	- Bugs in PgUp, PgDn response fixed.
	- kcd is now compiled and linked using `g++' instead of `gcc'.

------------------------------------------------------------------------------

Changes in Version 4.0.1
(Mar 14, 1997)

	- Compiles even when resizeterm is not found.  Window resize under
	  xterm/rxvt is disabled in this case.

	Improved configure script
	- Check for the present of local ncurses, zlib in ../lib before the
	  global one.
	- Separate library test and header test for ncurses and zlib.
	- Display error when --bindir, --exec-prefix option is specified.

	Makefile
	- `make clean' and `make distclean' now remove buffer.o
	- Add `config.h' to list of dependent file.

	New kcd options, --features and --helpinst

------------------------------------------------------------------------------

Changes in Version 4.0.0
(Mar 7, 1997)

	- New style syntax in configuration file.  Spaces are allowed inside
	  commands but double quotes ("...") are required to enclose
	  directory names.
	  For example:
		(earlier versions)	SkipDir=/cdrom
		(new syntax)		SkipDir = "/cdrom"
	- kcd now understands ~ and ~username specified in configuration file.
	- User will have to press Enter if any error is found in configuration
	  file.
	- The line that causes error in configuration is printed.
	- Directory tree are sorted (case-insensitive) by default.
	- All error reports use mixed case for config name, for example,
	  `skipdir' now becomes `SkipDir'.
	- New configuration command - `ClearSkipDir', `ClearStartDir', 
	  `SortTree', `SpaceSelect', `StartDir', `CaseSensitiveSort',
	  `QuietSmartScan'.
	- kcd version number in the directory tree screen reflects the version
	  of kcd running - not the kcd that creates the directory tree
	  file.
	- New file format.  kcd is forced to rescan automatically at the first
	  run.  The new format is no longer HTML-based, so do NOT use
	  khyper (came with earlier versions of kcd) to view .kcd.save.gz
	- Directory scanning can be terminated (except at the moment kcd is
	  writing data file which is immediately after finish scanning
	  and before time spent is displayed) without losing earlier
	  saved data.
	- Configuration files are read when kcd displays directory tree and
	  changes directory as well (although the loading message is
	  not explicitly shown).
	- kcd automatically redraw the screen when the window is resized
	  (under xterm).  The new ncurses-4.0 library is required to
	  support this feature.
	- In find mode (directory tree view), PgUp and PgDn behave like up and
	  down arrows respectively.
	- The way comment is handled in configuration is read changed - `#' 
	  inside double quotes (such as SkipDir="...") are treated as part of
	  directory name, not as comment.
	- Use configure script (autoconf-2.12)
	- kcd.sh.init, kcd.csh.init are automatically configured to the
	  installing directory.
	- By default, kcd will be installed in
			/usr/local/bin
	  for all new installations and in
			/usr/bin
	  for upgrading from earlier versions.
	  However, this behavior can be overrided by
			configure --prefix=PREFIX
	  (where PREFIX is /usr if you want to install in /usr/bin).
	- New kcdmain options: -ias, -ics, -ifs to support installation in
	  directories other than /usr/bin .
	- Generated binary (`kcdmain') are not stripped - To strip the symbol
	  table, type
			make strip
	- Makefile:
		- -I$(includedir) (which is /usr/include) removed.
		- -L$(libdir) (which is /usr/lib) removed.
		- Dependent files are .h instead of .o .
		- Use install instead of cp.
		- Use configure.
		- New `strip', `clean' and `distclean' targets
	
	- Smart scan mode implemented - almost twice as fast as the original
	  (now called full scan) mode.  (49 secs VS 91 secs on my 
	  system, both are tested immediately after system reboot.)
	- New option `-rf' to force full scan mode - needed when you modify
		config (SortTree, ...).
	- File listing moved from README to FILELIST .

	- Makefile.userinst:
		- Program restructure.
		- Fix error message dir. name from kcd to $HOME/kcd-bin .
		- Change -e to -f since -e is nonstandard.
		- Use install program supplied by configure.
	- kcd.csh.userinit - change $HOME to $home .
	- Test with directories with odd names such as `$HOME', `<', etc.
	  Most works fine except single quotes `'' and ``'.  Others 
	  are shell dependent.  bash (version prior 2.0) may display 
	  directory containing `$' incorrectly at the prompt although 
	  the directory change by kcd succeed.
	- New `\' quoting support for configuration values inside "...".
	  The character following `\' is treat as ordinary character.
	  `\', `'', `"' and ``' must be quoted as `\\', `\'', `\"'
	  and `\`' respectively.   Directory name containing `?', `*', 
	  `{' and `}' must also be quoted (for future features).
	- If the number directories that matches to the name given in
	  the command line exceeds a specified number,  kcd displays
	  the whole list.
	- Pressing Backspace or Del when the search string is empty exit 
	  find mode in directory tree window.
	- Replace `~' with `$HOME' in Makefile.userinst2
	- Add a man page kcd.1  It is mostly similar to README with 
		- no `kcd Basics', `System Requirements', ... sections.
		- different description for shell alias/function options to 
		  fit standard man page format.
	- Current working directory is automatically added to the directory
	  tree window if it is not in the saved tree.  They are
	  shown with `[*]'.  The new directory is, however, not saved 
	  to the file.  As a result of this change, kcd no longer 
	  generates the
			`kcd: cannot find <A NAME="...">'
	  error message.

------------------------------------------------------------------------------

Changes in Version 3.1.0
(Jan 13, 1997)

	khyper removed from this package.
	Fix editbox.cpp, editbox.h file permissions (previously executable).
	In find mode, control keys are no longer added into the search
		string.
	kcdscr passes more than one parameter to kcdmain so that help message
		is shown when too many parameters are given.
	Use our own version of strncase(...) - more portable.
	Fix kcd.sh.userinit and kcd.csh.userinit, now path is correctly set
		to ~/kcd-bin instead of ~/kcd.
	Fix a bug when directory names contain chars in the 128..255 range.
	Directory scan time is displayed.
	New option `-rQ' and new configuration command `quietfullscan'. (*)

(*) = It is intended to use with new features (currently not implemented)
      found in kcd-4.0.0.

------------------------------------------------------------------------------

Changes in Version 3.0.1  (Contains kcdmain 3.0.1 and khyper 0.4.0)
(Dec 27, 1996)

	Fix a bug - now works with directory name containing `&'.  File 
		format ID is also changed to force kcd to rescan directory 
		automatically at the first run.

	*** khyper is still in this version and will be removed from
	    kcd-3.1.0 ***

------------------------------------------------------------------------------

Changes in Version 3.0.0  (Contains kcdmain 3.0.0 and khyper 0.4.0)
(Dec 24, 1996)

Installation script now support users without root access.

For kcdmain (directory rescan):

	Not enough memory bug fixed - no memory allocate for reporting error.
	No longer use khyper to display directory tree.
	Find directory implemented.
	'q' key no longer exit the program.
	Center keypad now center highlight bar on the screen (cursor lock mode
		only).
	New options -iau, -icu and -ifu to support installation in user's
		home directory.

For khyper (directory tree display):
	
	*** This is the last version that includes khyper.  Future khyper will 
	    be available in a separate package ***

	Not enough memory bug fixed - no memory allocate for reporting error.
	Add support for <B>...</B>, <I>...</I>, <CITE>...</CITE>,
		<EM>...</EM>, <STRONG>...</STRONG> (use different color)
	<H?>...</H?> now displayed in different color from normal text
	Center keypad now center highlight bar on the screen (cursor lock mode
		only).

------------------------------------------------------------------------------

Changes in Version 2.0.2  (Contains kcdmain 2.0.2 and khyper 0.3.0)
(Nov 24, 1996)

kcdmain and khyper executables are no longer included due to possible
conflict when user's ncurses library is compiled using a different version
of gcc (C++ bool variable type).

For kcdmain (directory rescan):

	Fix a bug in time stamp inside `.kcd.save.gz'.
	Test with zlib 1.0.4

For khyper (directory tree display):

	Add check for filename with or without `.gz'.
	Cursor is now properly placed in the lower-right corner after the
		first screen paint for -c option.
	Test with zlib 1.0.4
	Works with non-preformatted text that cannot be wrapped.
	Add support for <BLOCKQUOTE>...</BLOCKQUOTE>
	Check for ncurses memory allocation error
	ISO 8859-1 chars set supported

------------------------------------------------------------------------------

Changes in Version 2.0.1  (Contains kcdmain 2.0.1 and khyper 0.2.1)
(Nov 1, 1996)

For kcdmain (directory rescan):

	Fix bugs in array size.
	Sorted option in help.
	Nicer error messages.

For khyper (directory tree display):

	Fix bugs in array size.
	Sorted option in help.
	Nicer error messages.

Makefile:

	Some cleanup.

------------------------------------------------------------------------------

Changes in Version 2.0.0  (Contains kcdmain 2.0.0 and khyper 0.2.0)
(Oct 27, 1996)

For kcdmain (directory rescan):

	The format of .kcd.save.gz has been changed.  But kcdmain can detect
	this and rescan directory to generate a new one.

	You can now jump directly to the desired directory by the using the
	following syntax to invoke kcd:

			kcd <portion of directory name>


	New -ia, -ic and -if option, for 'kcd' alias or function installation.
	Use
			eval `kcdmain -ic`

	for C shell-style syntax or

			eval `kcdmain -ia`

	for shells that support alias or

			eval `kcdmain -if`

	for shells that support functions.


	More error checking.

	Directories without read or execute permission are marked with 
	[unreadable].

	The zlib version required is 0.95, not 1.0.95 mentioned in kcd 1.0.0 
	README file.


For khyper (directory tree display):

	Up and down arrow keys behavior change, now it moves the highlight
	bar to the link directly above or below the current one.

	Pressing F10 or ^C (Ctrl-C) now exits khyper.  The previously
	defined 'q' key also works but produce a warning.  All alphanumeric
	keys are reserved for text find feature in the future version.

	F8 now repaints screen.

	Status bar added and the F9 key is used to switch between status
	display.

	Screen flicker during scrolling and initial screen display is
	totally eliminated.

	Option "-l" (search for link text and jump directly) is implemented.

	Tested under xterm.

	Change various character attributes (for monochrome terminals and
	xterm).

	More error checking.

	The zlib version required is 0.95, not 1.0.95 mentioned in kcd 1.0.0 
	README file.


For khyper File Syntax:

	khyper now ignores all unrecognized tags and will not report error
	message.

	For syntax error in recognized tags, khyper reports a more detailed 
	message including line and a small fraction of file that cause the
	problem.

	<A HREF="...">...</A> used to load another document is now
	supported.

	<A NAME="..."> now supports a closing </A> (comply to HTML standard).
	The </A> is optional but highly recommended for compatibility with
	future versions of khyper.

	Nested <A HREF=...>, <A NAME="..."> in any combination is not
	allowed yet.

	HTML <P>, </P>, <PRE>...</PRE>, <OL>...</OL>, <UL>...</UL>, <LI>,
	<HR> and <!--....--> tags and the new &quot; escape are implemented.

	<TITLE>...</TITLE> used to show document title on the status bar.

	khyper understands <H?> and </H?> (? = 1,2,3,4,5,6) tags and add an 
	emtpy line.  There is no attempt to display text larger than normal 
	due to limitation of text mode program.

	" ' and ` inside <A HREF=...> and <A NAME=...> tags can be nested.
	For example, <A HREF=`echo "$HOME,`date`"`> is properly parsed.

------------------------------------------------------------------------------

Changes in Version 1.0.0
(Sep 26, 1996)

	This is the first version.  It contains kcdmain 1.0.0 and 
	khyper 0.1.0.
