If the driver won't work:

- Please make sure that the values for LOGI_IOBASE, LOGI_IRQ and
  LOGI_DMA are correctly entered. Please note that you may need to
  allocate the IRQ to an ISA card if you have a PnP (Plug-and-Pray)
  BIOS. Please consult your BIOS/motherboard documentation for the
  correct procedure.

- Please make sure that you have generated the device special file
  /dev/logiscan  with the correct MAJOR number.

- For now, the ScanMan Color will not work with this driver. (This may
  change in the future.) All scanner models which plug into the
  parallel port are NOT (and WILL NOT) supported by this driver.
