ssh-multiadd - Copyright 2001-2002 Matthew Mueller <donut@azstarnet.com>

Purpose:
Adds multiple ssh keys that may use the same passphrase to the ssh
authentication agent.  When run without arguments, it adds
$HOME/.ssh/identity and $HOME/.ssh/id_dsa.  Alternative file names can
be given on the command line or specified in the configuration file.
Uses ssh-askpass if necessary.  The files need not use the same
passphrase, but if any of them do, you will only need to enter each
unique passphrase once.

Portability:
Written/tested on Linux with OpenSSH_2.5.2p2.
Should work with commercial ssh; I looked at the ssh-add output from 
1.2.31 and 2.0.13 and adjusted the regexps, but it is untested as
those systems didn't have python installed.  Let me know if it
does/doesn't work for you.

Install:
1) make sure you have python installed (v2.0 or greater)
2) modify ssh-multiadd first line if python is not available as "python2"
3) make install

Copying:
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version. 
See the file 'COPYING' for more information.

I would appreciate it if you make modifications if you would send them
to me for possible inclusion in the main source.

You can get the latest version at 
http://www.azstarnet.com/~donut/programs/
or
(ftp|http)://sunsite.unc.edu/pub/Linux/system/network/telnet/
