  =-= ---------------------------------------------- =-=
	***  Welcome To Upgrade-In-A-Box v2.29  ***

      This src was made for upgrading your linux box
      from ver. 1.2.X to 2.0.29 .... [ 02/09/97 ] ..
      by: Jerome G.  E-mail: jerome@cnd.net for help

  =-= ---------------------------------------------- =-=
      NOTE: Tested on SlackWare Distributions.......     
  =-= ---------------------------------------------- =-=

  *** The list below show you all the programs/libs, ***
  *** System tools/Utils that will be upgraded etc.. ***
  =-= ---------------------------------------------- =-=

       01) libc-5.4.17.bin.tar.gz	1,026,184 
       02) libg++-2.7.2.1.bin.tar.gz	1,271,340 
       03) make-3.75.tar.gz		  167,018 
       04) ncurses-1.9.9e.bin.tar.gz	1,088,530 
       05) db-1.85.4-bin-ELF.tar.gz	   68,576 
       06) binutils-2.7.0.3.bin.tar.gz	2,208,912 
       07) gcc-2.7.2.1.bin.tar.gz	4,262,743 
       08) e2fsprogs-1.06-elfbin.tar.gz	  206,614 
       09) termcap-2.0.8.tar.gz		  268,187 
       10) ld.so-1.8.5.tar.gz		  282,786 
       11) linux-2.0.29.tar.gz		6,070,224 
                                       ---------- 
                                Total: 16,952,511 
  =-= ---------------------------------------------- =-= 
  NOTE: All the above files came from (sunsite.unc.edu)  
  NOTE: YOU MUST BE ROOT TO UPGRADE YOUR SYSTEM.....     
  =-= ---------------------------------------------- =-= 


TO Install:
===========
    1] Copy  "upgrade-in-a-box.2.29.tar.gz" to your root
       file system.
          Exp: cp upgrade-in-a-box.2.29.tar.gz /

    2] tar xvfz upgrade-in-a-box.2.29.tar.gz 

       NOTE: Hope you have space.. If you had un-tar
             the file in another dir. del the files,
             then un-tar upgrade-in-a-box.2.29.tar.gz 
             in your root system dir. " / "

    3] At this time there is 1 new dir. in your " / "
       root system dir. "upgrade-in-a-box", 
       PLEASE do not delete any files in this dir.,
       when the "UPGRADE is 100% done you can do so"

    4] There is 2 src/program you can use to upgrade you
       system, [ upgrade or upgrade.sh ]
       to use (upgrade) you will need to have "tcsh" shell install,
           Exp: tcsh  
     or    Exp: csh        
     run......: upgrade

  NOTE: If you do not have "tcsh" or "csh" install,
        type..: upgrade.sh    to start your upgrade.
        
        Using "upgrade" for the Installation is better 
        than "upgrade.sh" ...

    5] Read the "Files+sites.txt" and "Changes-to-2.0.txt"
       for more info. for other utils. to upgrade when done..

    6] To upgrade your "pppd" and "ncurses" use "extra1"
       Exp: extra1 

       Extra1 will compile/install pppd v2.2f and ncurses-4.0.tgz

*** Thats about it... if you need any help E-mail: jerome@cnd.net
*** have fun..
====================================================================
