Installation instructions

RPM based systems

  1. download the package
  2. run `rpm -tb cyrprint-2.0.tar.gz' to build the rpm package
  3. install the resulting package with rpm, i.e. for RedHat system on i386, do
     `rpm -ihv /usr/src/redhat/RPMS/i386/cyrprint-2.0-1.i386.rpm`

The package can be relocated with --prefix argument passed to rpm.

If you want to play with the spec file, do the following:

  1. extract cyrprint.spec file from cyrprint-2.0.tar.gz
  2. edit cyrprint.spec file to change whatever you like. The installation paths are
     conrolled by definiton of _prefix at the begining of the file. XCONF_TOUCH
     controlls whether /etc/X11/XF86Config file will be modified to add the the new
     fonts to the font path. By default it is set to "no". Set to "yes" if you wish
     your font path to be changed.
  3. put cyrprint-2.0.tar.gz in SOURCES directory (/usr/src/redhat/SOURCES
     for RedHat)
  4. build the package with `rpm -ba cyrprint.spec`
  5. install the resulting package with rpm as described above

Other systems

  1. open cyrprint-2.0.tar.gz file in some directory
  2. change definiton of PREFIX at the begining of the Makefile (optional)
  3. run `make install'
