README.TXT for the Security Manager UseFull
===========================================

----------------------------------------------
VERSION FOR MS SQL SERVER
----------------------------------------------


Thank you for deciding to test UseFull.


CONTENTS
----------------

INTRODUCTION
MINIMUM REQUIREMENTS
INSTALLATION
BEFORE YOU START A NEW APPLICATION WITH USEFULL
LOGIN
DISCLAIMER
REGISTRATION


***********************************************************************

INTRODUCTION

***********************************************************************

UseFull was devised to make administration of rights for a Delphi
application easy and synoptical.
UseFull runs under Windows 95/98 and Windows NT. It is available in a
32-bit version for Delphi 3, Delphi 4 and Delphi 5. This current demo
version requires the MS SQL Server in the Version 6.5 or higher (please
inquire for other databases).

To find out more about the security manager UseFull, please follow the 
installation instructions and then read the online help (UseFullAdmin.HLP
and UseFullHlp.HLP).


***********************************************************************

MINIMUM REQUIREMENTS

***********************************************************************

 - 486-computer with 66 MHz processor (pentium processor recommended)
 - 32MB RAM
 - Windows 95/98 or NT 4.0
 - Video screen resolution: 1024 x 768
 - Delphi 3.01 or higher
 - MS SQL Server 6.5 or higher,
   or Interbase 4.x or higher

 If you are using a different database instead of Interbase or the MS SQL
 Server, you are welcome to order our self-running demo free of charge.
 Please inquire for other databases.
 
		           
***********************************************************************

INSTALLATION 

***********************************************************************

Installation of the database on the MS SQL Server:

1.	Please start the installation program "DBSETUP.EXE" in the directory
	"MSSQL\DB-Setup\english" on the CD-ROM and follow the instructions (F1).

	NOTE: Creation of the database objects can take several minutes!

2.	Copy the languages files "DLF-english.LNG", "DLF-standard.LNG" and
	"dylex.config" from the directory "...\language files" to the Windows
	system directory.   	

3.	Copy the help files "UseFullHlp.hlp" and "UseFullAdmin.hlp"
   	from the directory "...\Help\english" into the Windows system directory.

4.	For each project which uses UseFull the file "UseFull.ini" must exist 
	in the respective project directory. It must be copied from the directory
	"...\Ini" into your project directory.



Installation of the component in Delphi 3.x:
--------------------------------------------

1. Copy the DLL "UseFull.DLL" from the directory 
   "MSSQL\Delphi3\DLL" into the Windows System directory.

2. Copy the file "DelphiMM.DLL" from the directory 
   "MSSQL\Delphi3\DLL into the Windows system directory, 
   if it does not already exist on your computer.

3. Copy the following component files from the directory
   "MSSQL\Delphi3\Component" to your hard disk:

     -  UseFulComponent.dcu
     -  UseFulTypes.dcu
     -  UseFulImports.dcu
     -  Global.dcu
     -  UseFullDB.dcu
     -  UseFullReg.dcr
     -  UseFullReg.pas
	 -	UseFullIBRes1.dcu
	 -	UseFullIBRes2.dcu
	 -	UseFullIBRes3.dcu
	 
   Link the component with the filename "USEFULLREG.PAS"
   into a new or already existing Unit. 

   It then appears on a new components page under the name "UseFullControls".


Installation of the component in Delphi 4.x:
------------------------------------------------------

1. Copy the DLL "USEFULL.DLL" from the directory 
   "MSSQL\Delphi4\DLL" into the Windows system directory.

2. Copy the file "DELPHIMM.DLL" from the directory 
   "MSSQL\Delphi4\DLL into the Windows system directory, 
   if it does not already exist on your computer.
 
3. Copy the following component files from the directory
   "MSSQL\Delphi4\Component" to your hard disk:

     -  UseFulComponent.dcu
     -  UseFulTypes.dcu
     -  UseFulImports.dcu
     -  Global.dcu
     -  UseFullDB.dcu
     -  UseFullReg.dcr
     -  UseFullReg.pas
	 -	UseFullIBRes1.dcu
	 -	UseFullIBRes2.dcu
	 -	UseFullIBRes3.dcu
	 
   Please link the component with the filename "USEFULLREG.PAS"
   into a new or already existing unit.

   It then appears on a new components page under the name "UseFullControls". 

Installation of the component in Delphi 5.x:
-----------------------------------------------------

1. Copy the DLL "USEFULL.DLL" from the directory 
   "MSSQL\Delphi5\DLL" into the Windows system directory.

2. Copy the file "BORLNDMM.DLL" from the directory 
   "MSSQL\Delphi5\DLL into the Windows system directory, 
   if it does not already exist on your computer.

3. Copy the following component files from the directory 
   "MSSQL\Delphi5\Component" to your hard disk:

     -  UseFulComponent.dcu
     -  UseFulTypes.dcu
     -  UseFulImports.dcu
     -  Global.dcu
     -  UseFullDB.dcu
     -  UseFullReg.dcr
     -  UseFullReg.pas
	 -	UseFullIBRes1.dcu
	 -	UseFullIBRes2.dcu
	 -	UseFullIBRes3.dcu
	 
   Please link the component with the filename "USEFULLREG.PAS"
   into a new or already existing unit.

   It then appears on a new components page under the name "UseFullControls". 

  
**********************************************************************
   
BEFORE YOU START A NEW APPLICATION WITH USEFULL

**********************************************************************

	Before you start a new application with the security manager UseFull,
    you must read the help file UseFullAdmin.hlp, especially the chapter
    "Utilisation of UseFull in the Delphi development environment".
      

	There you will find important instructions which are mandatory (e.g.
	linking of the unit ShareMem).

	NOTE:	It may be necessary to deactivate the entry "stop on exceptions" in 
	the environment options.



***********************************************************************

LOGIN

***********************************************************************

When installing the database via the DB setup program, a user with the 
name "Usefull" and the password "Entwickler" is created automatically 
(upper/lower case is significant). This user belongs to the administrators
group and also automatically registers the current application on login 
(see online help).



***********************************************************************

DISCLAIMER

***********************************************************************

UseFull has been thoroughly tested, but due to the numerous possible hardware
and software combinations, undesired effects and incompatibilities can never
be excluded completely. 

No guarantee can be given that UseFull will function under all circumstances 
without error. We cannot accept any liability for consequential damage and 
possible loss of data resulting through the use of this program. The user 
alone must carry the risk of using this program.

You are allowed to distribute the demo version free of charge, provided 
that the program and the documentation contained therein are not modified.




 
***********************************************************************

REGISTRATION

***********************************************************************

You must register if you wish to utilise UseFull.
Please inquire under the telephone number specified below, or by Email, 
for current price information.



We wish you success and enjoyment with UseFull,

Your
SCS GmbH
	


________________________________________________________________________
 SCS GmbH, St.-Jobser-Str. 47, D-52146 Wuerselen

 Tel:       +44 (2405) 4650-0
 Fax:       +44 (2405) 4650-33
 E-mail:    info@scscomputer.de 
 WWW:       http://www.scscomputer.de/
________________________________________________________________________



Copyright (C) 1998/1999 SCS GmbH.  All rights reserved.


Delphi is a registered trade mark of the Inprise Corp.
Windows is a trade mark of the Microsoft Corp.

