teeMach SL
TeeChart Pro v4 VCL
-------------------

Installing QuickReport TQRChart source code.
============================================

Depending on which QuickReport version you have
installed on your machine, you might need to 
manually recompile a small package for the QRChart
component to use the same QuickReport version you have.

This allows you to install TeeChart Pro with any
past or future QuickReport version, in any Delphi or
C++ Builder compiler.


Recompilation is easy.
----------------------

Warning: 
 Check first you have QuickReport installed !
 Visit QuickReport web site at www.qusoft.no for
 upgrades.

 If you have an old TeeChart or TeeChart Pro version, 
 recompilation will fail.  
 Install first the TeeChart Pro v4 packages !
  
 If you are not a teeMach customer, download the
 "Free Upgrade Trial" version of TeeChart Pro 4 from
 our web site.

 This upgrade can be found at the "VCL" page, clicking
 on "Trial version Download" link.


Installation Steps:
====================

1) Open Delphi 4,3 or C++ Builder 3

2) Select:

  "File -> Open ->"

  The open file dialog is displayed. 

3) Select:

  "Package files (*.dpk)" ( *.bpk in C++ Builder )


4) Then open the appropiate file:

   For Delphi 4:    TeeQR44.DPK

   For Delphi 3:    TeeQR43.DPK

   For C++ 3   :    TeeQR4C.BPK


5) Now click the "Compile" button. 

   The package should compile fine. 
   If you receive errors, see "TroubleShooting" below.


6) Copy the compiled package to your "\Windows\System" folder.

   (Or \WinNT\System32 for Windows-NT )

    For Delphi 4 :  TeeQR44.BPL
    For Delphi 3 :  TeeQR43.DPL
    For C++ 3    :  TeeQR4C.BPL


7) Now you can click the "Install" button on the package
   dialog in Delphi or C++ Builder.

   This package is both a design-time and run-time package.

   This should install the QRChart component at QReport component
   palette.

8) Remember to check the "Project->Options->Packages" dialog.

   The new package name should be listed at the bottom edit-box.

9) Copy the following compiled units to Delphi "Lib" folder:

      QRTee.DCU
      QRTeeReg.DCU

   ( For C++ Builder, you should copy these files to \Lib\Obj,
     as well as the *.OBJ files and the *.HPP files to
     the \Include\VCL folder )
   

---------------------------------------------------------------
Other Delphi and C++ versions:

For Delphi 1,2 and C++ Builder 1, reinstall the QRTeeReg.pas
unit at component library. Always check the Linker Search path
and duplicated units in your disks.

---------------------------------------------------------------

TroubleShooting:
----------------

  Most common causes for installation problems are:

   -missing files 

     When Delphi or C++ Builder compile this package, they try
     to find the TeeChart Pro 4 and QuickReport units, either
     in source code (*.pas) or compiled (*.dcu) format.

     Check you have the correct paths to all units at 
     "Environment -> Options" dialogs.

   -wrong files

     If you have the original TeeChart Standard version included
     free in Delphi 4,3 or C++ Builder 3, installation can fail
     because the original compiled units have preference over
     the new ones.
     Check for existing TeeChart units at \Lib folder and replace
     them with the new ones. For Delphi 3 and 4, the installers 
     do automatically this replacement.

-----------------------------------------------------------------    