This file covers the following items:

========================================================
>   TRIAL VERSION LIMITATIONS

>   INSTALLATION

>   IGNORETAG PROPERTY

>   FOCUS FEATURE

>   GTSIZER FILES

>   KNOWN PROBLEMS

>   ORDERING
========================================================

*******************************************************************
TRIAL VERSION LIMITATIONS
*******************************************************************
The GTSizer++ trial version will run only when C++Builder is running 
AND at least one form containing the GTSizer++ trial version is open 
in the C++Builder Editor.

To evaluate the trial GTSizer++'s performance at different resolutions,
first compile your application at one resolution.  Minimize C++Builder.
Then run your application's EXE at various resolutions.  If you must
restart your computer to change resolutions, be sure to launch 
C++Builder before running your application's EXE.  (You can minimize 
C++Builder.)

DO NOT SELECT RUN FROM WITHIN C++BUILDER'S IDE AFTER YOU HAVE INITIALLY
COMPILED YOUR APPLICATION.  Selecting RUN will recompile the 
application at the new resolution and will not allow you to 
properly evaluate the GTSizer's usefulness. 

 
********************************************************
INSTALLATION
********************************************************

Installing the GTSizer++ is a three step process:

1) Launch the GTSizer++ setup application (GTSETUP.EXE).
This will copy your GTSizer++ files to the appropriate 
directories.  Note that the default path is 
C:\Program Files\Borland\CBuilder3\GTSizer++.  

2) The GTSizer package must then be installed to 
C++Builder's component palette.  

3) The GTSizer must be added to C++Builder's help index
for context-sensitive help.

*INSTALLING GTSIZER TO THE COMPONENT PALETTE*

>  Launch C++Builder.  From its main menu, choose
	
	Component | Install Packages...

The Packages page of the Project Options dialog box will
appear.  

>  Click the Add button.  The Add Design Package dialog
box will appear.  Select the CBUILDER3\LIB\OBJ directory and
highlight the file GTSIZER.BPL so that it appears in the
File Name edit box.  Then click OPEN.

The Packages page will reappear and GTSizer++ v 3.0 
will appear at the bottom of the Design Packages box.  

>  Click OK to close the dialog box.

The GTSizer controls will appear on the Component 
Palette as follows:

   GTSizer (hint name GTForm) on "Additional" Page
   GTDBSizr (hint name GTDBForm) on "Data Controls" Page
 
GTForm and GTDBForm are the ClassNames for the
components marketed under the name GTSizer.  The GTSizer
(GTForm) has a blue background and the GTDBSizr 
(GTDBForm) has a white background.

The GTDBSizr is primarily available to allow you to add 
VCL controls which the GTSizer does not recognize.  For 
more information, see Third Party Controls in the 
GTSizer++ help file.

*INTEGRATING THE HELP FILE*

>   From the main menu select
	Help | Customize. . .

>   Click on the Index page

>   Click on the "+" icon or Select Edit | Add Files

>   Change the directory to GTSizer++ and highlight
	gtsizer++.hlp

>   Select File | Save Project (the help file index 
    will rebuild).

>   Select Exit.

The GTSizer help file will be integrated with 
C++Builder's help file for context-sensitive help.

********************************************************
IGNORETAG PROPERTY 
********************************************************

*IGNORETAG PROPERTY*
The IgnoreTag property allows you to determine which 
number you wish the GTSizer to look for in the control's
Tag property.  As a designer you may not want GTSizer to
resize the font for all controls.  By default, the
GTSizer uses a value of 1 in the tag property to 
indicate which control's font not to resize.

However, some developers may already be using the value 
1 in the Tag property.  In this case, IgnoreTag ensures 
that you do not need to alter your code or change any 
Tag property to another value.

The Tag property can be any value you choose.  Just set 
the GTSizer's IgnoreTag property to the value you will 
use in the control's Tag property.  The GTSizer will not
resize the font of any controls where the tag property 
contains the same value as the IgnoreTag property value.

********************************************************
FOCUS FEATURE
********************************************************

In last year's 1.0 release, some users who set focus to 
controls received the message "Cannot focus a disabled 
or invisible control".  If you have this problem or 
wish to avoid it entirely, use the following code to 
set focus of any control at run time:

	GTForm1->Focus(NameOfControl);

For example, if you were setting focus to a control 
named Edit1 you would use:

	GTForm1->Focus(Edit1);

instead of

	Edit1->SetFocus;

If you are setting a control's focus on a tabbed 
notebook or page control, be sure that the page 
containing that control is visible and is also the 
current page.

********************************************************
GTSIZER FILES
********************************************************

After running the installation program, you should have 
the following files in the GTSizer++ directory:

GTReadme.txt
License.txt
GTSizer++.cnt
GTSizer++.hlp

Under the GTSizer++ directory you should have three
subdirectories (OBJ, VCL, and GT32DEMO) and their 
associated files:

*OBJ* 
(These files are also automatically copied to 
the CBuilder3\Lib\Obj directory)

GTSizer.bpl
GTSizer.bpi
GTSizer.lib
GTSize32.obj
GTSize32.dcu
GTSize32.dcr
GTDBSizr.pas
GTDBSizr.obj

*VCL*
(These files are also automatically copied to 
the CBuilder3\Include\Vcl directory)

GTDBSizr.hpp
GTSize32.hpp

*GT32DEMO*

Sample applications are included in the GT32DEMO 
directory.  These applications were created at 800x600 
small fonts.  It is best to compile these sample 
applications at 800x600 small fonts, because compiling 
at any other design resolution may require some 
adjustments. You can then test the EXE fles for the 
samples at various run time resolutions.  

The sample files have three subdirectories (GTMDIDEM, 
GTRTMDEM, and GTSDIDEM) and their associated files:

*GTMDIDEM*  
(Example of using the GTSizer in an MDI application)

Main.dfm
Main.pas
Maindemo.dfm
Maindemo.pas
MDIDem.bpr
MDIDem.cpp
Ordrinfo.dfm
Ordinfo.pas
Rescover.dfm
Rescover.pas

*GTRTMDEM*

(Example of using the GTSizer with controls added or 
deleted at run time)

GTRTMApp.bpr
GTRTMapp.cpp
RTMCtrls.dfm
RTMCtrls.pas

*GTSDIDEM*
(Example of using the GTSizer in an SDI application)

GTFlash.dfm
GTFlash.pas
GTSDIApp.bpr
GTSDIApp.cpp
SDILabel.dfm
SDILabel.pas
SDIMain.dfm
SDIMain.pas
SDIRescv.dfm
SDIRescv.pas

********************************************************

KNOWN PROBLEMS

********************************************************

*Duplicate GTSizer Recognition*
Only one GTSizer is needed per form.  It is best to add 
the GTSizer by selecting it from the component palette 
and clicking anywhere on your form.  Because the GTSizer
is a component that requires only one per form, it 
attempts to delete any previous GTSizer found on your 
form.

When the GTSizer icon is double-clicked from the 
component palette, the form may not be fully focused 
when the code is run.  So, it may remove the previous 
GTSizer from your form but the declaration may still be 
present in the unit file and you will receive an error 
message.  If this occurs, delete the declaration before 
dropping the GTSizer on your form.  

*alBottom or alTop*

Do not set a component to align bottom of the form or 
align top of the form.  If you do so, it will create
extra space on the form at run time.  You can use 
alBottom or alTop for placement at design time and then
set the align property back to alNone before running.

*MDI Forms*
Due to changes Borland has made in C++Builder 3, the 
GTSizer is not currently able to support the Main Form 
(form style MDIForm).  However, it does support MDI 
child forms (form style MDIChild). 

===================================================================
ORDERING
===================================================================

GTSizer is US$99.95 for a single developer license.  There are no 
runtime licenses or royalty fees.

Order from 

GenoTechs, Inc.
2741 West Southern Avenue #10
Tempe, Arizona 85282 USA

Tel:  602-438-8647
Fax:  602-438-8654
e-mail:  genotex@genotechs.com
http://www.genotechs.com

We accept checks payable in US dollars and drawn on a US bank, 
credit cards (Visa, Mastercard, American Express, Diners Club, 
and JCB), and bank wire transfers (e-mail for bank routing
number).

































