This file covers the following items:
===================================================================
>   TRIAL VERSION LIMITATIONS

>   INSTALLATION

>   NEW PROPERTY AND ENHANCEMENTS

>   GTSIZER++ FILES

>   KNOWN PROBLEMS

>   ORDERING
===================================================================

*******************************************************************
TRIAL VERSION LIMITATIONS
*******************************************************************
The GTSizer++ trial version will run only when C++Builder is running 
AND at least one form containing the GTSizer++ trial version is open 
in the C++Builder Editor.

To evaluate the trial GTSizer++'s performance at different resolutions,
first compile your application at one resolution.  Minimize C++Builder.
Then run your application's EXE at various resolutions.  If you must
restart your computer to change resolutions, be sure to launch 
C++Builder before running your application's EXE.  (You can minimize 
C++Builder.)

DO NOT SELECT RUN FROM WITHIN C++BUILDER'S IDE AFTER YOU HAVE INITIALLY
COMPILED YOUR APPLICATION.  Selecting RUN will recompile the 
application at the new resolution and will not allow you to 
properly evaluate the GTSizer's usefulness. 


******************************************************************
INSTALLATION

***IMPORTANT NOTE***
AS WITH ANY NEW COMPONENT, IT IS A GOOD IDEA TO MAKE A BACKUP OF YOUR 
COMPONENT LIBRARY FILE (\\CBUILDER\BIN\CMPLIB32.CCL) BEFORE ADDING THE 
GTSIZER TO THE COMPONENT LIBRARY.
******************************************************************

Installing the GTSizer++ is a two step process:

1) Launch the GTSizer++ setup application (GTSETUP.EXE).  This will 
copy your GTSizer++ files to the appropriate directories and integrate
the GTSizer's help system with Delphi's help system.  Note that 
the default path is C:\Program Files\Borland\CBuilder\GTSizer++.  

2) The GTSizer must then be installed to C++Builder's component 
palette.  

*INSTALLING GTSIZER TO THE COMPONENT PALETTE*

>  Launch C++Builder.  From its main menu, choose
	
	Component | Install...

The Install Components dialog box will appear.  

>  Click on the ADD button

The Add Module dialog box will appear.

>  Type GT32REG in the Module Name Field

>  Click OK

The Install Components dialog box will appear.  GT32REG will appear at
the bottom of the Installed Components list box.

>  Click OK

The component library will recompile.


The GTSizer controls will appear on the Component Palette as follows:

	GTSizer (hint name GTForm) on the Additional Page
	GTDBSizr (hint name GTDBForm) on the Data Controls Page
 
GTForm and GTDBForm are the ClassNames for the components marketed 
under the name GTSizer.  The GTSizer (GTForm) has a blue background 
and the GTDBSizr (GTDBForm) has a white background.

The GTDBSizr is primarily available to allow you to add VCL controls 
which the GTSizer does not recognize.  For more information, see Third 
Party Controls in the GTSizer++ help file.

If you wish to customize the component placement on the component 
palette, use the GT32Reg.PAS file to do so.  Simply replace the name 
in the Find RegisterComponent statement to the desired palette page 
name. (See the notes in the GT32Reg.PAS file)  

*****************************************************************
NEW PROPERTY AND ENHANCEMENTS
*****************************************************************

*NEW PROPERTY:  IGNOREFONT*
The IgnoreFont property allows you to determine which number you
wish the GTSizer to look for in the control's Tag property.  As a
designer you may not want GTSizer to resize the font for all 
controls.  Previously, you would use a value of 1 in the tag 
property to indicate which control's font not to resize.
However, some developers were already using the number 1 in the 
Tag property and had to alter their code and change it to another 
number.

In this version, the Tag property can be any number you choose.  
Just set the GTSizer's IgnoreFont property to the number you will 
use in the control's Tag property.  The GTSizer will not resize 
the font of any controls where the tag property contains the same 
value as the IgnoreFont property value.

*ENHANCEMENT:  SCREEN REFRESH*
This GTSizer release refreshes the screen much faster than 
previous releases.

*ENHANCEMENT:  FOCUS*
Previously, some users who set focus to controls received the 
message "Cannot focus a disabled or invisible control".  If you 
have this problem or wish to avoid it entirely, use the following 
code to set focus of any control at run time:

	GTForm1->Focus(NameOfControl);

For example, if you were setting focus to a control named Edit1 
you would use:

	GTForm1->Focus(Edit1);

instead of

	Edit1->SetFocus;

If you are setting a control's focus on a tabbed notebook or page 
control, be sure that the page containing that control
is visible and is also the current page.

*ENHANCEMENT:  CONTAINERS*
Container objects such as scroll boxes will resize normally, even 
when they contain controls which are considered outside the 
bounds of the form.  

*********************************************************************

GTSIZER++ FILES

*********************************************************************

After running the installation program, you should have the following 
files in the GTSizer++ directory:

GT32reg.pas
GTDBForm.cpp
GTDBForm.mak
GTDBSizr.pas
GTReadme.txt
License.txt
PReg32.cpp
PReg32.mak

Under the GTSizer++ directory you should have four subdirectories 
(GT32DEMO, HELP, OBJ, and VCL) and their associated files:

*GT32DEMO*

Sample applications are included in the GT32DEMO directory.  These 
applications were created at 800x600 small fonts.  It is best to
compile these sample applications at 800x600 small fonts, because
compiling at any other resolution may require some adjustments.  
You can then test the EXE files for the samples at various 
resolutions.  The sample files have three subdirectories (GTMDIDEM, 
GTRTMDEM, and GTSDIDEM) and their associated files:

*GTMDIDEM*  
(Example of using the GTSizer in an MDI application)

Main.dfm
Main.pas
Maindemo.dfm
Maindemo.pas
MDIDem.cpp
MDIDem.mak
Ordrinfo.dfm
Ordinfo.pas
Rescover.dfm
Rescover.pas

*GTRTMDEM*

(Example of using the GTSizer with controls added or deleted at run 
time)

GTRTMapp.cpp
GTRTMapp.mak
RTMCtrls.dfm
RTMCtrls.pas

*GTSDIDEM*
(Example of using the GTSizer in an SDI application)

GTFlash.dfm
GTFlash.pas
GTSDIApp.cpp
GTSDIApp.mak
SDILabel.dfm
SDILabel.pas
SDIMain.dfm
SDIMain.pas
SDIRescv.dfm
SDIRescv.pas

*HELP*

GTSizer++.cnt
GTSizer++.hlp

*OBJ*
GT32Reg.obj
GTDBSizr.dcu
GTDBSizr.obj
GTSize32.dcr
GTSize32.dcu
GTSize32.obj

*VCL*

GTDBSizr.hpp
GTSize32.hpp

*********************************************************************

KNOWN PROBLEMS

*********************************************************************

*Duplicate GTSizer Recognition*
Only one GTSizer is needed per form.  It is best to add the GTSizer 
by selecting it from the component palette and clicking anywhere on 
your form.  Because the GTSizer is a component that requires only one 
per form, it attempts to delete any previous GTSizer found on your 
form.

When the GTSizer icon is double-clicked from the component palette, 
the form may not be fully focused when the code is run.  So, it may 
remove the previous GTSizer from your form but the declaration may 
still be present in the unit file and you will receive an error 
message.  If this occurs, delete the declaration before dropping the 
GTSizer on your form.  

===================================================================
ORDERING
===================================================================

GTSizer is US$99.95 for a single developer license.  There are no 
runtime licenses or royalty fees.

Order from 

GenoTechs, Inc.
2741 West Southern Avenue #10
Tempe, Arizona 85282 USA

Tel:  602-438-8647
Fax:  602-438-8654
e-mail:  genotex@genotechs.com
http://www.genotechs.com

We accept checks payable in US dollars and drawn on a US bank, 
credit cards (Visa, Mastercard, American Express, Diners Club, 
and JCB), and bank wire transfers (e-mail for bank routing
number).
















