        Here is a small howto about installing LablGtk2 on Win32

Binary installation

 The binary distribution includes the lablglade, lablrsvg, and
 lablgnomecanvas libraries.

0) Both MSVC and mingw versions of ocaml 3.11 should work.
   If you want to do custom linking (either ocamlc -custom, or ocamlopt),
   get a recent version of flexdll. Standard ocamlc linking only
   requires dlls.

1) Install the gtk2 libraries and dependencies.
   This binary distribution was built using the "bundle" package at
     ftp://ftp.gnome.org/pub/gnome/binaries/win32/gtk+/2.16/
   (mirrors list at: ftp://ftp.gnome.org/pub/gnome/MIRRORS)
   Just follow the instructions in the README file inside the package.
   If you want to use the extension libraries (currently lablglade,
   lablrsvg and lablgnomecanvas are supported), you must also install
   the (numerous) dependencies. Here is what was used during
   compilation:
    libglade (requires libxml2)
    libgnomecanvas (requires libart_lgpl)
    librsvg (requires libcroco and libgsf)
   If you want to do custom linking, you need also the dev packages.
   All of these are available in the above win32 and
   win32/dependencies directories.
   The distribution was compiled using the gtk+ bundle of 20090911,
   but other versions should work too.

2) Install lablgtk2 binaries and scripts inside the OCaml distribution
     bin/lablgtk2.bat             -> bin
     lib/stublibs/dlllablgtk2.dll -> lib/stublibs
     lib/lablgtk2                 -> lib/lablgtk2

3) Go to the lib/lablgtk2 directory and execute
        ocaml build.ml
   This will compile the ocaml part of the library (the C part is
   already compiled.)
   It may fail on the native code version (using ocamlopt) if the
   assembler is not on your path.  Look in the Objective Caml windows
   documentation for what is needed, and check that you have a working
   installation by compiling and linking a trivial program.
   Note also that the autodection for mingw is not fool-proof
   (lablgtk2 has to be installed directly under the ocaml library), so
   if the OCaml port annouced by build.ml is not the right one, you
   should specify it by hand inside build.ml.

   You must repeat this compilation step every time you upgrade OCaml.

4) Test in examples
     lablgtk2.bat testgtk.ml

   See also the "Windows port" section of the main LablGtk2 README for
   important remarks on threads on Windows.

5) For custom linking or native code, you need to use the export
   libraries in the above DLL package. There is not default place to
   put them, so you should specify that at link time:
     ocamlopt -ccopt "-LC:/opt/gtk/lib" -I +lablgtk2 lablgtk.cmxa \
         gtkInit.cmx testgtk.ml -o testgtk.exe
   Again, if this fails you must make sure that your ocamlopt really works,
   and that all paths are correctly specified.


Full compilation with MSVC or mingw (for the brave)

0) You will need the MSVC version of ocaml 3.11 or more,
  and cygwin development tools. You must also install flexdll
  (at least 0.7) from
       http://alain.frisch.fr/flexdll.html

1) Install Gtk 2: use the precompiled binaries available at 

     http://gladewin32.sourceforge.net/

  This time you need the developper version.
  Do NOT even try to compile it yourself from scratch.

  Try to compile a small hello-gtk.c (see the tutorial page on 
  http://www.gtk.org) before going further.

  You may unzip optional libraries available from 
    http://ftp.gnome.org/pub/gnome/binaries/win32
  in c:\GTK.
  For example to have GtkSourceView 1 support, you have to unzip : 
   libgnomeprint-dev.xxx.zip
   libgnomeprint.xxx.zip
   libart_gpl-dev.xxx.zip
   libart_gpl-dev.xxx.zip
   libxml2-dev.xxx.zip
   libxml2.xxx.zip
   win_iconv_dll-tml-xxx.zip
   gtksourceview-dev.1.xxx.zip
   gtksourceview.1.xxx.zip

  If you need to check that all dependencies are installed, use
   pkg-config --libs gtksourceview-1.0
  and see if an error is reported.

3) Copy config.make.msvc or config.make.mingw to config.make, and edit it
   to set GTKROOT.

   Alternatively, on mingw you may run the configure script.
	./configure --disable-gtktest

   If you do want to perform configuration time Gtk C tests the define
   CYGWIN=nobinmode before running ./configure. 
   The rationale behind CYGWIN=nobinmode is that pkg-config is a
   native windows program which outputs \r\n instead of usual unix \n.
   The CYGWIN variable forces the shell to strip down all \r from
   command answers.

4) Simply do "make" and "make opt" for the native version.

5) Install ("make install") and test.

$Id: README.win32 1486 2009-09-25 09:18:09Z garrigue $
