                           Installation notes
                           ~~~~~~~~~~~~~~~~~~

 Hard Drive Owners:

 To install OctaMED Soundstudio onto a hard drive use HD_Install.

 However, this script will only copy the disk files required to run
 the program from your HD and if you require the docs ( RexxDocs etc ),
 the OctaMEDPlayer and the archived omed rexx scripts on your HD partition,
 you will need to copy these across manualy.
  ( this is done in case you have limited HD space )

 The full helpfile for the program is copied to your HD partition and
 all you need to do is press the "HELP" key whilst the program is
 running and it will load in and be displayed.

 Finaly, please note that the "Soundstudio.config is set to look for
 the helpfiles, ( the one it looks for is titled OctaMED.Guide ), in
 your "Work:" partition and if you copy the prog to a HD named other
 than "Work" you will need to alter this via an editor or prog like
 SID or Dopus and you simply look for a line that says:
 helpfile = "Work:OctaMED_Soundstudio/help/OctaMED.Guide"
 and alter the "Work" part of the line to your partition,  ( ie sys: etc )

 Floppy Users:

 Before you do anything else you MUST click on the "Floppy_Fonts" and also
 the "Floppy_Assigns" otherwise none of the files on here  will work.

 ( You will be required to click on "Floppy_Assign" prior to running
   the prog each time you use it, but once the Fonts have been copied
   to your FONTS: disk, you need not click upon this icon anymore. )

 "Floppy_Fonts" will copy the required fonts from this disk onto your
 WB3 or WB2.01 FONTS: disk. There is room as long as you have not
 added anything, but you should only do this on backup copies.

 "Floppy_Assigns" will do all the necessary assigns to run OctaMED
 directly from your floppy drive setup, even if you only have one drive!
 ( please remember that you need to do this prior to running the program )


 If you *still* only have the one WB2.04 disk, you will need to obtain
 the later WB2.01 set of disks to use this script, why?, see above/below.

 Notes:

 If you wish to make use of the notators Compugraphic fonts, you must have
 the _bullet font available on your WB3 or WB2.01 FONTS: disk and you will
 also need to setup your PrinterGFX controls. ( read owners manual )

 ( If you only have WB2.04, you cannot make use of the Compugraphic fonts )

 We take no responsibity for the scripts not working on a particular
 setup, allthough it has been tested with an A1200 and A4000 with
 the supplied WB3 disks and on an A2000 with the supplied WB2.01 Disks.


 May we suggest that as with your WB disks, you make backup copies of
 the supplied OctaMED_Soundstudio disks before you commence using them.
 Finaly:


 Due to space restrictions, the Programers drawer containing all Teijos
 latest files and libraries have had to be removed from these disks.

 However, as it is only a very small minority of users that actualy
 require these, they can be obtained from the Aminet server.

 If you do not have use of a modem, you can send for the source and
 libs player routines disk directly from us by sending 5.00 to cover
 the disk, packing and return postage, directly from RBF Software at:

 RBF Software, 169, Dale Valley Road, Southampton. SO16 6QX England