\input cwebxmac

\def\title{\CWEBx. MANUAL}\titletrue
\parskip=0pt plus 2pt

\font\boldit=cmbxti10
\font\twelverm=cmr12
\font\twelvett=cmtt12

\def\lheader{\mainfont\the\pageno\eightrm\qquad\firstmark\hfill\title}
\def\rheader{\eightrm\title\hfill\firstmark\qquad\mainfont\the\pageno}

\countdef\secno=1
\let\oldbeginsection=\beginsection
{\let\oldbeginsection=\relax % temporarily remove outerness
 \outer\gdef\beginsection #1 \par
 {\global\advance\secno by 1
  \oldbeginsection{\number\secno\space\space#1}\par
  \edef\next{\write\cont{\Z{\number\secno}{#1}{\noexpand\the\pageno}}}\next
  \uppercase{\mark{#1}}%
}}


\let\z\relax
\def\subsection#1 \par
{\smallskip\noindent{\boldit #1}\quad
 {\def\.{\noexpand\noexpand\noexpand\.}%
 \def\do##1{\def##1{\noexpand\noexpand\noexpand##1}}\dospecials
  \edef\next{\write\cont{\z{#1}{\noexpand\the\pageno}}}\next
}}

\def\pb{\.{|...|}}
\def\<#1>{\hbox{\rm\def\ { }$\langle\,$#1$\,\rangle$}}
\def\sp.{structured programming}
\def\lp.{literate programming}
\def\Lp.{Literate programming}
\def\LP.{Literate Programming}
\def\WEB.{\caps{WEB}}
\def\ASCII.{\caps{ASCII}}
\def\CWEB.{\.{CWEB}}
\def\CWEBx.{\.{CWEBx}}
\def\LKC.{Levy/Knuth \CWEB.}
\def\:#1{`\/\.{@#1}'}
\def\atspace.{\:{ }}

\outer\def\N#1 #2. #3. %start of `@*' section
 {\MN#2.%
  \ifon \vskip 0pt plus .5 \vsize \penalty-1000\vskip 0pt plus -.5 \vsize
	\vskip\intersecskip
  \startsection{\bf#3.\quad}%
 }
\def\MN#1.% common code for \M, \N, \n
 {\par\xdef\secstar{#1}\ontrue}% no \mark, no starred sections
\def\inx
 {\par\vskip6pt plus 1fil \endcodemode % we are beginning the index
  \output=\bufferedoutput\pagesavedfalse\eject % eject pages, keeping last
  \setbox\sbox=\vbox{\unvbox\sbox} % allow its glue to reset
  \vsize=\pageheight \advance\vsize by -\ht\sbox % the remaining height
  \hsize=.5\pagewidth \advance\hsize by -10pt
    % column width for the index (20pt between cols)
  \parfillskip 0pt plus .6\hsize % try to avoid almost empty lines
  \def\lr{L} % this tells whether the left or right column is next
  \output=
  {\if L\lr\global\setbox\lbox=\page \gdef\lr{R}
   \else
     \normaloutput
     {\vbox to\pageheight
      {\box\sbox \vss \hbox to\pagewidth{\box\lbox \hfil \page}}%
     }% page argument to \normaloutput
     \lheader\rheader % other two arguments to \normaloutput
     \global\vsize\pageheight \gdef\lr{L} \global\pagesavedfalse
   \fi
  }%
  \parskip 0pt plus .5pt
  \outer\def\@##1##2, % index entry; ##1 is `h' or `m' for horiz/math mode
    {\par\hangindent2em\noindent\if##1m$##2$\else##2\fi:\kern1em}
  \def\[##1]{$\underline{##1}$} % underlined index item
  \rm \rightskip0pt plus 2.5em \tolerance 10000 \let\*=\lapstar
  \hyphenpenalty 10000 \parindent0pt
 }
\def\fin{\let\@\relax\con}% make these innocuous before scanning argument:
\def\con#1\con{% ignore stuff after index
  \par\vfill\eject % this is done when we are ending the index
  \ifpagesaved\null\vfill\eject\fi % needed in case index is empty
  \if R\lr \null\vfill\eject\fi % finish the current page
  \parfillskip 0pt plus 1fil % restore normal paragraph end
  \setpage % restore page shape
  \output={\normaloutput\page\lheader\rheader} % restore output routine
}

\centerline{\titlefont Literate Programming in C}
\medskip
\centerline{\twelverm The {\twelvett CWEB} System
    of Structured Software Documentation}
\medskip
\centerline{Manual for \CWEB.x3.0}
\bigskip
\centerline{Marc A. A. van Leeuwen}

\bigskip\bigskip


\beginsection Overview

This document describes \CWEB.x3.0, a particular implementation of \CWEB., a
system that supports the concept of ``\lp.'' for programs written in the
language~\Cee\ (more particularly for this version, in \caps{ANSI/ISO} \Cee).
As this manual aims to supply all information possibly relevant to a wide
variety of users, it is necessarily rather extensive. However, \CWEB. is not
a complicated system, and just a few simple commands suffice for practical
programming purposes; these are discussed in the section~4 (the remainder
serves mainly to allow fine-tuning of the presentation of the printed
documents describing literate programs).

As the somewhat contrived name of the system indicates, \CWEBx. is not the
only version of \CWEB.; indeed it is based on an older version of \CWEB. by
Silvio Levy, which is an adaptation to~\Cee\ of the \.{WEB} system (for
Pascal) written by Donald~E. Knuth, the founder of \lp.. That \CWEB. system
has independently evolved into a system that is currently distributed, under
joint responsibility of Levy and Knuth, as \CWEB.~3.4. Those with experience
using \LKC. will already be acquainted with most aspects of \CWEBx., and may
turn to section~9 for a summary of the differences between the two systems;
however, \CWEBx. also provides a compatibility mode (selectable by specifying
`\.{+c}' on the command line) in which it should be able to process
\Cee~programs written using \LKC. without any modification.

The structure of this manual is as follows. In section~2 an exposition of
the ideas underlying the concept of \lp. is given, and a description of how
systems of the \.{WEB} family provide concrete tools to support this
programming methodology. This section is directed particularly to those who
are new to \lp.; it explains the purpose of \CWEB. and the logical
connection between the various elements that \lp. adds with respect to
traditional programming. As an illustration we then give a small example
program using \CWEB. in section~3. The main commands of \CWEB., which define
the structure of the source text and tell the \CWEB. tools what to do with
the various pieces of that text, are discussed in section~4. In section~5 we
discuss how the behaviour of \CWEB. tools can be further affected by means
of command line options and file name arguments supplied when the programs
are invoked. In section~6 we discuss some facilities for distributing the
source text over several input files, including a ``change file'' that
allows applying local patches without affecting the original source files;
this is not directly related to \lp., but can be quite useful in larger
projects. In section~7 the remaining minor \CWEB. commands are explained,
and section~8 discusses some features of the \TeX\ format employed by
\CWEB., which can be used to affect the appearance of \CWEB.  documents.
Section~9 is devoted to a comparison with \LKC.; finally section~10
summarises all \CWEB. codes recognised in the source text.


\beginsection About literate programming

\Lp. is a concept that was developed, implemented, and propagated by D.~E.
Knuth in the early 1980's, as a natural sequel to the concept of ``\sp.''
that had caused a revolution in the world of software development about a
decade earlier. (At this moment, another decade further, one may conclude
that \lp. has not caused a similar revolution, since many programmers
practicing illiterate programming do not feel at all as guilty about this as
they would if they were to be found practicing unstructured programming.) So
let us first consider the idea of \sp. more closely.

\subsection Structured programming

Without attempting a definition of the term, it seems fair to say that \sp.
involves designing a program by hierarchical decomposition of the task at
hand, and constructing a program that has a similar decomposition into parts,
where each part ``solves'' the corresponding subtask. The subdivision of the
program manifests itself in its division into subroutines (procedures,
functions), and at the more detailed level in the syntactic composition of
those routines (control structures, blocks); this explains why much emphasis
is placed on the use of subroutines, and why languages with a linear program
model and (conditional) jumps as their main control structure (like assembly
language) do not form a natural vehicle for \sp.. The question as to which
criteria should be used in subdividing problems into smaller ones is
difficult to answer in general, but a good rule of thumb is that at the
level of abstraction at which a task is defined it should be possible to
give a reasonably simple informal description of its subtasks, in which a
new level of detail about the method used to perform the task is given. (It
would be nice if the subtasks also had simple formal specifications, but in
general this is too much to ask, since informal descriptions do not only
abstract from implementation details, they may also conceal numerous obvious
specification details).

It can be said that the idea of \sp., undone of any dogmatism that has been
associated with it, has been rather universally accepted, and has proven to
be an effective methodology in software development. Other methodologies
have been put forward, such as data encapsulation, but this has been in
addition to rather than as an alternative for \sp.. \Lp. however is related
in a different way to \sp., as it concerns not the contents of the program
itself, but rather the way it is presented. \Lp. presupposes \sp., but is
independent of other programming paradigms; any program that has been
designed in a structured way can in principle be rendered as a literate
program, without requiring a change of the program text itself.

\subsection Limitations of traditional \sp.

Although the composition of a structured program should reflect the design
decisions that led to its construction, the traditional way of presenting
such programs lacks appropriate facilities for communicating this
information effectively to readers of the program, seriously limiting the
readability, especially to people other than the programmer of the code. Yet
readability is of vital importance, because it is only by careful reading
that we can verify that the design of a program is sound and
well-implemented, and to understand where and how changes can be made when
such a need arises. Of course the code may be documented by adding an
arbitrary amount of comments, but there are various reasons why this has a
limited effectiveness, so that in practice the level of documentation is
nearly always (much) lower than would be desirable from the point of view of
maintainability.

The syntactic decomposition of a piece of a structured program into a
hierarchy of control structures, compound statements, etc., is crucial to
understanding the way it functions, yet the human eye is much less capable
of performing this task then a parser is, even when proper indentation is
applied. The difficulty rapidly increases with the size of the program
fragment, and can become a serious factor when this size exceeds a dozen or
two lines (depending on the complexity of the structure). And even when we
can recognise the structure, the meaning of the individual parts cannot be
immediately perceived, but must be derived from close inspection of the
code, or from the comments. However, as comments are localised in the code,
and it is hard to attach a comment clearly to a construct of some
considerable extent. Also, adding too many comments may actually decrease the
readability of the program, by making the structure recognition problem
worse. Even indentation, useful as it may be, can be more of a nuisance than
of any help when it becomes so deep that it forces code and comments to be
squeezed together into (or fall off) the right margin. Finally the fact that
program sources are usually plain text files, represented in a single rather
crude font, does not improve human readability. The limitations of the
character set hamper formulation of comments, where special symbols,
formulae, tables or illustrations might convey the information much more
effectively; in the program itself the eye has to do without visual clues
marking the distinction between various types of program elements
(identifiers, keywords, constants, literal strings, operators, comments,
etc.). As a consequence of all this, few people will find much pleasure in
reading source listings, even if the program is well designed and
documented, and possibly even contains some interesting and subtle
algorithms.

Many of these problems would not be too grave if all subroutines were
severely limited in size and complexity. However, although it might be
possible to live up to such a restriction for certain kinds of programs (in
particular if the task involves mostly simple actions of administrative
nature rather than any really complicated algorithms), it would be a very
impractical requirement in general, certainly for procedural programming
languages. First of all, having to break up a subroutine using auxiliary
subroutines solely because of the size of the code, violates the basic
principle that such a decomposition should be the result of design
decisions. Furthermore, there are several technical reasons why such a
decomposition could be either impossible, or might involve a large amount of
additional code that has little to do with the actual task being performed,
and that might deteriorate performance unacceptably. Examples of such
reasons are for instance the need to perform a large multi-way branching, to
have local variables that are visible throughout the execution of a complex
algorithm, or to have the possibility to jump out of nested structures on
certain (error) conditions (while the language might not allow jumps out of
a subroutine into the routine calling~it). Finally, introducing many small
subroutines, for reasons that cannot be described easily outside the
immediate context in which they will be used, creates a serious problem of
giving them sensible names and remembering the tasks they perform.

Concluding we may say that \sp. in its traditional form does not encourage
or even allow the level of documentation that would be desirable for
maintenance and intelligibility by people other than the author of the
program.


\subsection Requirements for \lp.

The basic idea of \lp. is to take a fundamentally different starting point
for the presentation of programs to human readers, without any direct effect
on the program as seen by the computer. Rather than to present the program
in the form in which it will be compiled (or executed), and to intercalate
comments to help humans understand what is going on (and which the compiler
will kindly ignore), the presentation focuses on explaining to humans the
design and construction of the program, while pieces of actual program code
are inserted to make the description precise and to tell the computer what
it should do. The program description should describe parts of the algorithm
as they occur in the design process, rather than in the completed program
text. For reasons of maintainability it is essential however that the
program description defines the actual program text; if this were defined in
a separate source document, then inconsistencies would be almost impossible
to prevent. If programs are written in a way that concentrates on explaining
their design to human readers, then they can be considered as works of
(technical) literature; it is for this reason that Knuth has named this
style of software construction and description ``\lp.''. More background
information about this concept and its history concept can be found in
Knuths book ``\LP.'', CSLI Lecture notes~\#27, Leland Stanford Junior
University, 1992 (ISBN 0-937073-81-4).

From the discussion above it will be clear that traditional programming
languages are not directly suitable for \lp.. We shall now try to formulate
requirements for a system that supports \lp.. Doing so we shall especially
keep in mind programs that evolve after their original design, possibly
altering certain parts of that design, and possibly being realised by
different persons, since it is in such cases that the benefits of \lp. are
particularly crucial.

The documentation parts of the program description should allow for the same
freedom of expression that one would have in an ordinary technical paper.
This means that the document describing the program should consist of
formatted text, rather than being a plain text file. This does not exclude
the possibility that the source is written as a plain text file, but then it
should undergo some form of processing to produce the actual program
description. The document should moreover contain fragments of a program
written in some traditional (structured) programming language, in such a way
that they can be mechanically extracted and arranged into a complete
program; in the formatted document on the other hand layout and choice of
fonts for these program fragments should be so as to maximise readability.

Parts of the program that belong together logically should appear near to
each other in the description, so that they are visible from the part of the
documentation that discusses their function. This means that it should be
possible to rearrange program text with respect to the order in which it
will be presented to the computer, for otherwise the parts that deal with
the actions at the outer level of a subroutine will be pushed apart by the
pieces specifying the details of inner levels. The most obvious and natural
way to do this is to suppress the program text for those inner levels,
leaving an outline of the outer level, while the inner levels may be
specified and documented elsewhere; this is a bit like introducing
subroutines for the inner levels, but without the semantic implications that
that would have. There should be no restrictions on the order in which the
program fragments resulting from this decomposition are presented, so that
this order can be chosen so as to obtain an optimal exposition; this may
even involve bringing together fragments whose location in the actual
program is quite unrelated, but which have some logical connection.

Obviously there should be a clear indication of where pieces of program have
been suppressed, and which other program fragments give the detailed
specifications of those pieces. From the programming language point of view
the most obvious method of identification would be to use identifiers,
resulting in a simple system of parameterless macros, with as only unusual
aspect that uses of the macro are allowed to precede the definition, and
indeed do so more often than not. Actually, \lp. uses a method that differs
from this only trivially from a formal standpoint, but has a great advantage
in practical terms: identification is by means of a more or less elaborate
phrase or sentence, marked in a special way to indicate that it is a
reference to a program fragment. This description both stands for the
fragment that is being specified elsewhere, and also serves as a comment
describing the function of that fragment at a level of detail that is
appropriate for understanding the part of the program containing it. In this
way several purposes are served at once: a clear identification between use
and definition is established, the code at the place of use is readable
because irrelevant detail is suppressed, with a relevant description of what
is being done replacing it, and at the place of definition a reminder is
given of the task that the piece of code presented is to perform. The
documenting power of such a simple device is remarkable. In some cases the
result is so clear that there is hardly any need to supply further
documentation; also it can sometimes be useful to use this method to replace
small pieces of somewhat cryptic code by a description that is actually
longer than the code itself. It is hard to give a sharp limit on the length
of the description for a program fragment, but if substantially more than a
sentence is needed, say a full paragraph, then the fragment probably does
not represent a well chosen abstraction, which might be an indication that
the design of the program has some room for improvement. On the other hand,
it is good practice to explicitly mention any unusual control flow that
might be caused by executing the abstracted fragment, like jumping to a
label outside the fragment, since such information is vital for a proper
understanding of the program at the place where the fragment is used.

\subsection WEB systems for \lp.

Until now we have discussed \lp. as a general concept, independent of any
particular implementation; this was done to stress the generality of the
idea. We shall now indicate how these ideas are realised by ``\WEB.
systems'', a family of systems that were modelled after Knuth's original
\.{WEB}, and of which \CWEB. is a member. In these systems the program
source is written as a plain text file, and a pair of programs is provided,
which transform this source into other text files suitable for processing by
a compiler respectively by a typesetting program. Other kinds of \lp. tools
are conceivable (e.g., ones that would provide the programmer with a direct
graphical representation of the typeset document while editing, possibly
with hypertext facilities), but this approach has the advantage of being
fairly simple and portable across many platforms. The approach is not the
simplest possible however, as a substantial part of the work done by the
tools deals with transforming the program fragments from their plain text
form into typeset text with proper fonts and layout (i.e., with
pretty-printing); this part of the task also depends essentially on the
programming language being used. By reverting to verbatim representation of
program fragments one could make simple tools that support \lp. in a
language independent way---and indeed such tools exist---but then a price is
paid in terms of readability. We should also note that \WEB. systems support
writing documents whose purpose is to simultaneously specify and document a
program; if one is primarily writing a theoretic paper, in which only
occasionally pieces of program text are mentioned, then one might prefer a
slightly different kind of system that does not impose as much global
structure on the document as \WEB. systems do.

Not surprisingly, \WEB. systems satisfy all the requirements for \lp.
formulated above, and they do so in a fairly straightforward manner.  A
typeset \WEB. document consists of a sequence of consecutively numbered {\sl
sections}, whose size is typically less than half a page. Each section may
contain a program fragment, called a {\sl module}, preceded by a commentary
in ordinary text, although in some cases either one of these parts might be
absent. (The programming language used for the program fragments depends on
the particular \WEB. system used, as does the typesetting system that
eventually produces the printed document; for the \CWEB. system described
here these are respectively \Cee\ and \TeX.) In most cases a module is
headed by a text in angle brackets called its {\sl module name}, which gives
a description of the task it performs. This name is followed by `$\EQ$' and
the program code that constitutes the module itself; this is called a
defining occurrence of the module name. (We make a distinction between the
words `section' and `module', using the former for a numbered portion of the
\WEB. document, and the latter for a named portion of the program described
by it.) A module name can also be used in the body of some other module,
either before or after its definition in the document, to represent the
corresponding piece of program text. \WEB. facilitates locating the
definition of a module from the place where it is used by automatically
incorporating the number of the defining section in the module name. The
actual program text is then constructed by recursively replacing module
names by the text specified in their definition (this should of course
follow the grammatical structure of the program, lest the most basic
principles of \lp. be violated). A program fragment occurring at the
outermost level is distinguished by the fact that it is not headed by a
module name.

Most module names will have just one defining occurrence, and will also be
referenced just once; in both cases there may however be exceptions, where a
module name has more than one occurrence of the indicated kind. If a module
is multiply referenced, this simply means that the corresponding part of the
program text is repeated identically in more than one place. If a module
name has more than one defining occurrence, then the text of the
corresponding module is obtained by concatenating the program fragments of
all its definitions in the order in which they occur in the document. In a
similar fashion all fragments without module name are combined into an
``unnamed module''. These are the only occasions where the order in which the
sections are given can have any effect on the final program; apart from this
the literate programmer has complete freedom of ordering the sections in a
way that facilitates understanding the program as much as possible.

We need not discuss all aspects of \WEB. systems here, but a few points that
contribute to \lp. by improving readability should be mentioned. The proper
formatting of all program fragments is automatically taken care of by the
\WEB. system, providing a uniform style of presentation. The system also
provides a large amount of cross-reference information; this greatly
facilitates reading the program and searching for specific pieces of code.
Not only is the number of the (first) section defining a module incorporated
in its name, but in that defining section indications are also given of the
section(s) in which the module is used, and possibly of any further defining
occurrences of the same module name. At the end of the document an
alphabetically sorted index is added, listing for each identifier all the
sections in which it is defined or used; the programmer may also add
additional entries to the index by indicating in the program source that
certain sections should be referenced for particular terms. A list of all
module names is also given, which may help locating the part of the program
dealing with some issue. So in many ways the \WEB. system tries to aid human
understanding of the program, but of course the literacy of the programmer
will always remain the decisive factor in this respect.

\beginsection What a\/ {\tentt CWEB} program looks like

Enough now of general considerations, let us turn our attention to the
\CWEB. system this manual is really about. The best way to learn about it is
probably to read a \CWEB. document. Therefore we include a small but
complete \CWEB. program below; the program is about as small as possible
without rendering a decomposition into modules pointless. The example is not
intended as a showpiece of programming literacy, but it demonstrates various
aspects of the system.  The index at the end of the program is included, but
not the list of the four module names in this program or the table of
contents. One will notice that some symbols appear to be different from
their official representation in \Cee, for instance the assignment
operator~`\.=' appears as~`$\K$', the equality operator~`\.{==}' as~`$\E$',
the logical ``and'' and ``or'' operators `\.{\&\&}'~and~`\.{||}' as
`$\W$'~and~`$\V$' respectively, the variable~`\.{f1}' as~`$f_1$', and the
null pointer~`\.{NULL}' as~`$\NULL$'; thus the possibilities of the
typesetting system are used to improve the appearance of the program.

\vfil\eject

\begingroup \input compare \par\endgroup

\subsection Some remarks about the example program

Reading the program should not cause great problems to anyone familiar with
the \Cee\ language, once one gets used to the representation of the symbols.
We mention a number of points that will have become clear in the course of
the example.

The commentary text at the beginning of the sections is set in ordinary
paragraphs, which contrasts sufficiently with the appearance of the program
text that the dividing line between the two can be easily perceived, even
though it is only marked by a bit of white space. In case the section
defines (part of) a named module, the module name heading the program
fragment is set flush left, and is followed by~`$\EQ$', or in case this is
not the first defining occurrence of that name, by~`$\PE$' (therefore, the
occurrence of the module name `$\X5:Functions\X$' in \Sec2 is not a defining
one, whereas the occurrences of that name in \Sec5 and~\Sec7 are). The style
in which the module names and comments contained in the program fragments are
set is similar to that of ordinary text; indeed if they are too long to fit
on the line, they will be broken across lines (with proper care taken to
respect the indentation level). In \CWEB. embedded comments are always
attached to the right of a program element (usually a statement or
declaration); in the example we can see there is relatively little need for
embedded comments, because of the other means provided for documentation.
An embedded comment that is split across lines will not look very good, and
should only occur in cases of emergency; in most cases it is better to use
the commentary part at the beginning of the section for any elaborate
explanation. On the other hand, long module names (occupying up to about
four lines) are not uncommon when the task performed by the module calls for
an extensive description.

As one can see in the example, it is common to refer to small pieces of
\Cee~code (in most cases just variables or simple expressions) from within
the commentaries, module names and comments. The \CWEB. system makes it easy
to include such pieces, by providing a variant of the formatting routines
used for the actual program fragments (differing from them by the omission
of any 2-dimensional layout features such as indentation). In many cases the
pieces of \Cee~code are so simple that they could easily be typeset directly
(using \TeX's math mode), producing the same formatted output without using
the facilities of \CWEB.. But even then it is preferable to use \CWEB.
instead, because it will then guarantee that all identifiers mentioned in
such a way in the documentation part of a section or in a comment, will be
included in the index at the end of the program. Although in many cases a
reference would have been generated anyway by the program fragment in the
same section (as happens in all cases for our example program), this
mechanism ensures that even remarks about the use of variables and functions
made in sections that contain no program fragment at all can be traced from
the index. Incidentally, identifiers that are used only in a module name are
not indexed, which is why there is no reference to \Sec2 in the index entry
for~\\{exit}.

When an index entry is recorded, whether from within a program fragment or a
piece of \Cee~code embedded in text, the occurrence may be flagged as
`defining', depending on the context; this happens for instance in the case
of parameters in an \caps{ANSI/ISO} style function heading, of variable
declarations and of labels. If at least one occurrence of an identifier in
some section is a defining one, then the corresponding section number in the
index entry for that identifier will be underlined. Single-letter
identifiers, the special identifier \.{NULL} (appearing as `$\NULL$'), and
keywords of the language are considered so ubiquitous that no index
references for them are generated, except those that are underlined; e.g.,
in the example there is no reference to \Sec6 for the variable~$n$. For
keywords this means that they will not appear in the index at all (unless
the programmer explicitly marks certain occurrences as defining); note
however that identifiers defined in a \&{typedef} declaration (like \&{bool}
in the example) will be indexed, even though they are set in boldface just
like keywords are.

\subsection Further attributes of\/ {\tentt CWEB} programs

An aspect of \CWEB. programs that does not stand out very clearly in our
miniature example is that it allows sets of related sections to be grouped
together into ``chapters''. Each chapter is identified by its title, which
appears in boldface after the number of its first section; in our example
sections 1~and~8 start new chapters. The division into chapters has a few
more effects on the document, which were suppressed in our example, since
they would interfere with the overall structure of this manual: each chapter
starts on a fresh page, its title appears in the running head of all its
pages, and all chapter titles are collected in the table of contents.
(Style changes such as employed in this manual are easy to obtain, since the
style is not determined by the \CWEB. system, but rather by a separate
format consisting of \TeX~macros; a few small changes to standard format can
change the overall appearance of the document, and it would be equally easy
to change for instance the page size or the symbols used to represent
operators.)

There is one important point left to explain about the example, which is the
special position of the lines starting with \&{\#define} and \&{\#include}.
Although they look like ordinary preprocessor lines, which
could have been included in the program fragments, they are in fact separate
items that are given between the documentation part and the program part of
a section (this can be seen best in~\Sec6), forming a third type of
constituent of sections (although in most sections they will be absent).
Their place in \CWEB. is less distinctive then that of their analogues in
\WEB. systems for languages that have no preprocessor (like the original
\.{WEB} for Pascal, which provides a separate macro facility itself): indeed
the directives are just passed on to the \Cee\ preprocessor. Yet there is
some advantage in specifying them as special items to \CWEB., and in most
cases using these facilities is preferable to embedding the directives in
the \Cee~program fragments.

One reason is that one usually wants the effects of preprocessor directives
to be visible throughout the \Cee~file that is generated, while this would
not always be the case if they were specified inside the program fragments;
for instance if the definition of \\{read\_mode} in \Sec6 had been included
in the program fragment, it could not have been validly used in \Sec7,
because that section will precede~\Sec6 in the \Cee~file produced. This
difficulty could be overcome by collecting all macro definitions in a module
that is used at the start of the program and defined in many sections
throughout the \CWEB. document. In fact this is just about how \CWEB. treats
the separately specified preprocessor directives: they are collected in
order of appearance, and placed at the very beginning of the \Cee~file.
(Some other place of insertion for the preprocessor directives can be
specified by means of a pseudo-module named `$\ATP$', but this is quite
rare.) Since a section can define only one module, the \CWEB. facility for
preprocessor directives may help avoid having to split up sections merely
because they contain such a directive. Furthermore, an important reason to
specify \&{\#include} directives to \CWEB., is that this allows it to
inspect those header files for any typedef declarations, so that programs
can be formatted properly; without this programs using typedef identifiers
defined in header files would seriously confuse the syntax analysis that
\CWEB.  performs, resulting in very poor quality formatting of program
fragments.

Preprocessor directives other than those mentioned above can only be
incorporated in a program by including them in an ordinary program module,
but there is relatively little need for such directives. In situations where
one would use conditional compilation in ordinary~\Cee, one can usually use
the ``change file'' mechanism provided by \CWEB. instead (this will be
discussed below), especially if it involves system dependent modifications;
this has the advantage that such modifications do not affect the main source
files, and only those modifications that are actually applied will be
visible in the \CWEB. document. In the rare cases that one does include a
preprocessor directive in a program fragment, the fact that it is not being
specified as a separate item to \CWEB. is usually easy to recognise in the
\CWEB. document, because the module name being defined or some program text
precedes it; however even if this should not be the case then such embedded
directives can still be distinguished by a slight difference in horizontal
and vertical spacing.

\subsection Output to multiple files

There is one important construction one may encounter in \CWEB. documents, that
we have not mentioned yet. There may be module names that consist of a file
name in typewriter type, like `$\X14:\.{common.h}\X$'; usually such module
names are nowhere referenced, but only have one or more defining
occurrences. \CWEB. documents containing such a module will produce a file
of that name in addition to the \Cee~program that is normally produced. The
module bearing the name of the file will form the root module of the
\Cee~code written to that file, in the same way as the unnamed module forms
the root module for the ordinary output. This feature is particularly useful
for the production of header files that can be included by other compilation
units (and even by the program produced as main output). It allows one for
instance to state function prototype declarations that go to the header file
and the matching function definitions in the \Cee~program in the immediate
vicinity of one another within the \CWEB. document. The module with the file
name can refer to submodules, and so on to any depth, just like the modules
contributing to the main output. This possibility should be used with some
restraint however, lest readers have difficulty finding out to which file
the program fragment defined by some module will be sent. The preprocessor
lines that are handled by \CWEB. will normally only become part of the main
program output, not of any additional output files; this provides one valid
reason for sometimes bypassing the facilities of \CWEB., and incorporating
\&{\#define} and \&{\#include} directives directly into program modules.


\beginsection How to create a\/ {\tentt CWEB} program

In the previous section we have explained how one should read \CWEB.
documents; in this section we shall discuss how they can be written. The
``\CWEB. document'' we have been discussing is the printed text that is
eventually produced from the source file written by the programmer, but
that file does not look quite like the printed version; on the other hand
the difference in appearance is not so great that there is any difficulty
finding the place in the source file corresponding to some part of the
printed text.

\subsection The general setup

The programmer creates a plain text file using the format explained below,
which contains both program fragments and commentary, and has file name
extension `\.{.w}'; e.g., the file from which the example above was produced
is \.{compare.w} (it is included in the \CWEBx. distribution). The \CWEB.
system consists of two utility programs `\.{CTANGLE}' and `\.{CWEAVE}' that
can be applied to this source file. In order to create an executable
program, one issues the command `\hbox{\.{ctangle compare}}', which will
read the file \.{compare.w} and write a file \.{compare.c} containing the
corresponding \Cee~program. This file can then be processed in the ordinary
way by any \Cee~compiler to produce an executable program. To produce a
printed document on the other hand, one issues the command `\hbox{\.{cweave
compare}}', which will again read the file \.{compare.w}, and this time
write a file \.{compare.tex}.  This file serves as input for the typesetting
program~\TeX: by giving the command `\hbox{\.{tex compare}}' it will be
processed, and the result is a file \.{compare.dvi}. This file can be either
previewed or converted to hardcopy output by the system dependent programs
for this purpose that accompany \TeX. Despite the somewhat elaborate
processing trajectories, it will become apparent that the programmer has
good control over the final result produced in both cases.

A word of explanation about the names of \CWEB. and its constituent
programs. The initial \.C's stand for the programming language, of course;
the rest of the names are the same as those chosen by Knuth for the original
\.{WEB}~system (which existed long before the World Wide Web). The \CWEB.
language allows one to separately describe small parts of a \Cee~program and
their interconnections, both formal (via module references) and informal (by
some semantic relationship); with some fantasy this evokes the image of a
web of connected pieces. These parts are linearised quite differently in
their presentation for human readability than in the ``official'' form in
which they are presented to the \Cee~compiler, and it is the program
\.{CTANGLE} that does the somewhat complicated reordering to obtain the
latter from the former. This process is traditionally called ``tangling''
the code, although one could also call it untangling if one prefers formal
to human order. The \.{CWEAVE} program intertwines the \TeX\ and \Cee~parts
of the source text and ``weaves'' them together like warp and weft,
resulting in a beautifully formatted document.  Despite these pretty
metaphors, you will be forgiven if you sometimes get these names mixed up.

This general organisation of \CWEB. has some immediate consequences. First
of all, one needs to have an operational \TeX~system and (not surprisingly)
a \Cee~compiler in order to use \CWEB.; the \CWEB. programs form only a
comparatively small part of the utilities needed. Second, the \CWEB.
language must be such that both valid \Cee~code and \TeX~input can be
derived mechanically from it, which are rather different formats.
Nevertheless the \CWEB. language is quite simple: this is because for almost
all of the \CWEB. source text the required format is either that of \TeX\ or
that of \Cee. The main function of the specific \CWEB. commands is to
structure the source file and determine which parts of the input will be
processed further in what way. Finally, a somewhat unfortunate consequence
of \CWEB.'s setup is that errors may be detected by any one of \.{CTANGLE},
the \Cee~compiler, \.{CWEAVE} and \TeX. The knowledge about \Cee~and~\TeX\
built into the \CWEB. programs is far from sufficient to ensure that they
will always produce error-free output code, although of course they do their
best not to introduce any errors themselves. A bright point in the case of
\Cee~errors, is that the \&{\#line} directives produced by \.{CTANGLE} enable
the compiler to refer directly to lines in the \CWEB. source file in its
errors messages, rather than to the intermediate \Cee~file (but \TeX\ does
not have a similar facility).

It follows from these facts that the \CWEB. programmer must be acquainted
both with \Cee\ and with \TeX; however, the depth of the knowledge required
it not the same in both cases. Obviously, one cannot write a computer
program without a good understanding of the programming language used, but a
very superficial knowledge of \TeX\ will suffice: in most cases no \TeX
pertise beyond the basic facts in chapters~2--6 of {\sl The \TeX book\/} is
required (but please don't skip chapter~2, as only too many people have
done). The reason for this is that one rarely needs to instruct \TeX\ to do
sophisticated formatting. It is true that the proper typesetting of computer
programs is a subtle matter, but it is precisely this part that is taken
care of by \.{CWEAVE} (even for references to \Cee~constructs in the
commentary), and the programmer can just concentrate on writing
syntactically correct \Cee~code. On the other hand the full power of \TeX\
is available if one wishes to use it, for instance to illuminate the program
with things like complicated tables, or math formulae of a different nature
than those occurring in a computer program.

Since the \CWEB. commands deal only with the structure of the source file,
not with its contents, they can be very brief: they consist of `\.@' followed
by one other character, and are commonly referred to as {\sl control codes}.
For instance, \atspace. (i.e., `\.@' followed by white space) indicates the
start of a new section, and \:c marks the start of the \Cee~part of a
section that contributes to the unnamed module. Control codes may placed at
any position within the source lines, although it is customary to place the
ones defining the coarse structure of the source file at the beginning of a
line for better visibility. In some cases a control code marks the beginning
of a piece of text that will be interpreted by \CWEB. in a special way, as
for instance \:< which starts a module name; the end of these {\sl control
texts\/} is always marked by the special code \:>. The character `\.@'
was selected because it is quite uncommon both in \Cee\ and in \TeX\ source
code, but in those cases where one does need to pass on the character itself
(e.g., in \Cee~strings and comments) it should be written as \:@.

We now discuss the various control codes, grouped by their function.  Here
we shall treat only the most important control codes, which are used
regularly in ordinary programs. Treatment of a number of additional control
codes, that either serve for fine tuning in special cases, or are intended
to allow emergency fixes in unforeseen cases, is deferred to a later
section, in order not to confuse novice \CWEB. users.  For the codes that
are discussed, we do however provide full details of their use; most of
these can be skipped on first reading. A summary of all \CWEB.  control
codes can be found an the end of this manual.

\subsection Sectioning codes: \:*, \atspace., \:\~

The most important control codes are those that specify the division of the
\CWEB. program into sections. There are three codes that indicate the start
of a new section, and are therefore called sectioning codes. Each of them
has a slightly different effect, and each section must start with one of
them (i.e., a section is never implicitly started).  The three sectioning
codes are \:*, \atspace., and \:\~, of which the second one is the most
commonly used. No section numbers should be given in the source file: these
will be automatically computed and inserted by \CWEB.. A tab or newline
following `\.@' is considered equivalent to a space, and for any of these
three control codes, (further) white space separating it from the \TeX~text
that follows is ignored, as long as there is no completely blank line (which
\TeX\ would interpret as the end of the paragraph that started with the
section number).

A section starting with \:* will start a new chapter of the \CWEB.
document; it should be followed by the title of the chapter, which is
terminated by the two-character sequence `\hbox{\.{. }}' (again the space
might be any white space character). The title is not recognised by \CWEB.
itself, but rather by \TeX, as a delimited macro argument
\unskip\footnote{${}^\dagger$}
{Therefore, if no correctly specified title follows~\:*, then
 \.{CWEAVE} will find nothing wrong, but \TeX\ will complain about a
 ``Runaway argument'' of a macro that the programmer did not explicitly
 write (namely `\.{\\N}'); this is one of the scarier error message that
 novice users can come across, so please be warned.
}.
This means that if one wants to have an occurrence of the sequence
`\hbox{\.{. }}' in the title itself, this can be achieved by enclosing the
title (but not the `\hbox{\.{. }}' terminating it) in braces.  If one wants
to put other things than plain text in a chapter title, one should be aware
that it is converted to upper case in the running heads of pages and also
written to the table of contents file; only items that behave properly under
these operations should be used in a chapter title. Apart from issuing a
title that will appear in several places, a section starting a chapter will
force a page break before it, and it will cause the section number to be
printed on the terminal during the execution of \.{CTANGLE} and \.{CWEAVE},
as a progress report.

As a feature for advanced users of \CWEB., some extra information may be
supplied with the \:* control code: if it is immediately followed by `\.*'
or by a decimal number, than this is not included in the chapter title, but
rather interpreted as an indication of the ``level'' of the chapter. Here
`\.{@**}' indicates the start of a grouping of sections even coarser than a
chapter, and the grouping started by `\.{@*$n$}' becomes finer as $n$
increases, with `\.{@*0}' corresponding to unadorned \:*. The effect of this
level depends on the definition of the \TeX\ macros that format the chapter
title and the lines in the table of contents, `\.{\\N}' respectively
`\.{\\contentsline}', to which the level is passed as first argument (for
`\.{@**}' the level is~$-1$); it could effect for instance the font used for
the chapter title or the amount of indentation of that title in the table of
contents. In the default definitions of these macros the level is largely
ignored, except that `\.{@*$n$}' will not force a page break for $n\geq s$,
where $s$ is the value of the `\.{\\secpagedepth}' register, which is set
initially to~2.

In contrast to~\:*, a section starting with~\:\~ instead of~\atspace. will
tie itself to the previous section, in the sense that a page break between
these sections will be avoided. More precisely this is what happens:
normally \.{CWEAVE} will instruct \TeX\ to break pages only between sections
(except when one is too large too fit on a single page) and put as many
sections on each page as possible subject to this restriction; however, a
section starting with~\:\~ will be considered to be continuation of the
previous section for the purpose of page breaking. A situation where one
would use \:\~ is the following: suppose we define a function, and also want
to state its prototype, which will belong to a different module, since it
has to appear earlier in the program or even on a separate (header) file. A
natural place to give the prototype in the \CWEB.  document is directly
before the function, so that it can easily be seen that the prototype
matches the actual definition. Now without special measures there is a
substantial chance that a page break will occur between these two sections,
since the short section with the prototype might fit on an already partially
filled page, whereas the larger section with the definition might not. By
starting the latter section with~\:\~, it can be achieved that in such cases
the former section is moved together with the latter to the new page.

Like any other section the very first section starts with s sectioning
code (usually \:*), and any text that might precede it is not
part of any section; this text is said to be ``in limbo''. This material is
ignored by \.{CTANGLE}, and copied literally into the \TeX\ file by
\.{CWEAVE} (except for the replacement of~\:@ by~`\.@'), following the first
line which always reads `\.{\\input cwebxmac}' (in order to load the
standard format). The purpose of the text in limbo is to allow issuing
\TeX~commands that apply to the whole document (such as macro definitions,
possibly modifications or additions to the standard format), or producing a
title page or an introduction preceding the sections of the \CWEB. document.
No control codes are allowed in the limbo text (well, almost; there are two
exceptions, that will be mentioned below). The last section ends simply
at the end of the \CWEB. source file; there is no way to add material after
it (or elsewhere outside the sections). However, \.{CWEAVE} will append some
material at the end itself (unless it is invoked with a `\.{-x}' flag): an
index of identifier uses, a list of module names, and a table of contents.
Because the index is seamlessly attached to the last section, it is
customary to give that section the title ``Index'' and not to include any
program fragment in it.


\subsection Subsectioning codes: \:d, \:h, \:f, \:c, `\/\.{@< {\dots} @>=}'

Each section, as delimited by the sectioning codes, contains a \TeX~part
(although it may be empty), and in addition at most one \Cee~part, which
always comes at the end of the section, and zero or more intermediate parts,
of which there are three kinds: those that specify \&{\#define} and
\&{\#include} directives, and format definitions (see below). Intermediate
parts can be given in an arbitrary order, as long as they come after the
\TeX~part and before the \Cee~part, if present. The beginning of any part
other than the \TeX~part (which starts directly after the sectioning code)
is marked by an appropriate control code, which is called a subsectioning
code; these codes are optional in the sense that they need only be given if
the corresponding part is present. The end of the \TeX~part is determined by
the first subsectioning code, or in absence of any of them by the next
sectioning code.

The \Cee~part, if present, begins at the first occurrence of \:< or \:c; the
former starts a defining occurrence of a module name, and the latter is used
when the \Cee~part belongs to the unnamed module. The code \:c may also be
written as \:C (in fact all alphabetic codes are equivalent to their upper
case counterparts). Once the \Cee~part of a section is started, any further
module names are interpreted as modules references rather than as defining
occurrences. A module name, whether defining or not, consists of \TeX~code
between the \:< and the next occurrence of~\:>. As a measure against
accidental misinterpretation of module names, due for instance to a
forgotten \atspace. or \:c, the closing \:> of a defining occurrence must be
followed (optionally with some white space in between, but no newline) by
one of `\.=', `\.{==}', `\.{+=}' and `\.{+==}', while for a non-defining
occurrence this must not be the case.  The possibilities `\.{+=}' and
`\.{+==}' are included for those who like their source code for
continuations of modules to resemble the printed output, but the distinction
is ignored by \CWEB.: it will simply print `$\EQ$' after the first defining
occurrence of a module name and `$\PE$' after any further defining
occurrences.

The subsectioning codes that mark the beginning of intermediate parts are
\:d, \:h, and \:f. Of these the first two specify preprocessor directives
for respectively a macro definition and the inclusion of a header file, and
the last specifies a so-called format definition. The codes \:d and \:h will
be replaced by \&{\#define} respectively by \&{\#include} in both the
program and the printed document. We already mentioned how the effect of
using \:d or \:h differs from that of using \&{\#define} or \&{\#include}
directly in the \Cee~part of the section: the directive will be moved to the
beginning of the \Cee~file, and in case of \:h, the header file will be
scanned for typedef definitions. Here we mention a few more points that are
relevant when writing the source file.

Macro definitions following \:d are not line-oriented like those in \Cee:
everything up to the next subsectioning or sectioning code is considered to
belong to the macro, and newlines need not be escaped, as \.{CTANGLE} will
take care of escaping any newlines while writing to the \Cee~file. There are
some mild restrictions on the replacement text of a \:d macro definition:
parentheses and braces should be balanced (this is a deliberate requirement,
made in order to allow detection of programming errors that would otherwise
be very hard to track; the same requirement also holds for each complete
\Cee~part of a section), and no module names should be referenced. It is not
possible to use other preprocessor directives in macro definitions either,
but that is because this is already impossible in~\Cee. After a \:h command,
at least one newline should occur before the next sectioning or
subsectioning code.

Apart from this, \:d and \:h are followed by whatever would follow
\&{\#define} respectively \&{\#include}, with the same deviant lexical rules
as in~\Cee. So whether a macro introduced by \:d is defined with or without
arguments depends on whether the first character after the identifier
following \:d is a left parenthesis or not, where spaces {\it are\/}
significant. The file name after~\:h may be enclosed either in double quotes
or in angle brackets; the latter indicates that the header file is located in
some system include file area. After the file name a comment may be placed.

The header file specified after \:h itself should of course contain ordinary
\Cee~code rather than \CWEB. input; after all, it will be read directly by
the \Cee~compiler. As as mentioned before, the file will be scanned by
\.{CWEAVE} as well, searching for any typedef definitions; moreover, if it
contains any lines starting with \&{\#include}, then those files will be
scanned recursively as well. In the case of system header files (specified
with angle brackets), \.{CWEAVE} will refrain from scanning the file unless
the file is found on an explicitly specified search path (see below); in
fact it is better not to scan any of the \caps{ANSI/ISO} standard header
files, since \.{CWEAVE} already knows about all typedef definitions that can
occur in such header files. It is not uncommon that a header file specified
after~\:h (using quotes) is itself an auxiliary output file produced from a
\CWEB. source file, possibly even from the very source file containing the
\:h~command. There is no circularity or other problematic aspect of such a
situation, but one should remember to run \.{CTANGLE} to produce the header
file, before the run of \.{CWEAVE} that needs it.

The way \.{CWEAVE} searches for the header file depends on how the name
following \:h is specified: if it is enclosed in quotes then \.{CWEAVE} will
look first in the current directory. There may have been specified one or
more alternative places to look for header files, in the form of strings
that can be prefixed to the file name (given on the command line or compiled
into \.{CWEAVE}, or both). If so, these will be tried in order, regardless
of the delimiters used for the file name, until a match is found; \.{CWEAVE}
will only insist on actually finding a header file if the file name was
enclosed in quotes.

There is one aspect of scanning header files that might cause a problem in
some cases: when scanning a header file, \.{CWEAVE} is unaware of other
preprocessor directives that may disable certain nested \&{\#include}
directives; \.{CWEAVE} will therefore obey such \&{\#include} directives
unconditionally. Such a problem is not very likely, but it could be serious
if the nested header file cannot be found (and is enclosed in quotes), or if
there are circular references between header files. Various solutions could
be found for such a problem, depending on the precise situation, varying
from creating dummy files or avoiding conditional compilation by the use of
change files to (as a last resort) avoiding the scan of the header file
altogether, by using \&{\#include} in a program fragment rather than~\:h; in
the latter case relevant information could be extracted from the header
file manually, and converted into format definitions (\:f) described below.

When preprocessor directives are incorporated in the \Cee~part of a section,
the ordinary rules of \Cee\ apply: they should be spelled out in full, as
`\.{\#define}' or `\.{\#include}', and occur at the beginning of a line; the
directive ends at the next non-escaped newline. Although in \Cee\ it is
permissible to extend a preprocessor directive into the following line by
placing a multi-line comment that contains the newline, this should not be
done in \CWEB., since the comment will be removed by \.{CTANGLE} but the
newline will remain. If one needs a very long comment after a preprocessor
directive, one should start it on the line following the directive; in the
formatted document such a comment will be placed on the same line as the
directive. The same holds for comments placed after a \:h command.

Format definitions, indicated by the code \:f, are entirely specific to
\CWEB., and have no effect on the \Cee~program that is defined. They are not
needed very often, but when they are, a proper use of them is essential for
obtaining acceptably formatted output. To understand why they are sometimes
needed, one has to consider the way \.{CWEAVE} formats program fragments.
The input is broken up into tokens (like identifiers, constants, operator
symbols), and a syntactic category is attached to each; the resulting
sequence of categories is then analysed according to a grammar, and formatted
correspondingly. Certain identifier tokens are recognised as reserved words
and get a corresponding the syntactic category, others are recognised as
typedef identifiers and get the same syntactic category as for instance
\&{size\_t}, and the remaining ones are treated as ordinary identifiers. This
scheme usually works fine, but occasionally there can be problems, caused by
the fact that \.{CWEAVE} is not aware of all the information that is
available to the compiler. The main reasons for this are macros (which may
cause the code seen by the compiler to be quite different from that seen by
\.{CWEAVE}), typedef declarations that are hidden from \.{CWEAVE}'s sight,
and module names that stand for a construct of a different syntactic
category than \\{statement} (which is what \.{CWEAVE} expects them to be by
default). In all these cases \CWEB. provides mechanisms for the user to put
\.{CWEAVE} on the right track, and format definitions are one such mechanism
(others will be discussed below).

Format definitions allow the programmer to explicitly state the syntactic
category that \.{CWEAVE} should attach to a given identifier. They have the
form `\.{@f x y}', which will become `\&{format}~$x$~$y$' in the typeset
output; here $x$ and $y$ can be arbitrary identifiers or keywords. This
definition has the effect of associating to~$x$ the same syntactic category
that is associated to~$y$. Such a change of category is required when an
identifier is defined as a macro to stand for a keyword:  whenever you say
`\.{@d ident keyword}', say `\.{@f ident keyword}' as well. For instance,
the author of this manual thinks the keyword \&{static} is not very
informative when applied to functions, and therefore often creates an alias
for it by saying `\hbox{\&{\#define} \\{local} \&{static}}'; this directive
is then followed by `\hbox{\&{format} \\{local} \&{static}}'. We see that
the first identifier after \:d~or~\:f is always typeset in italics; this is
so despite the fact that in the example, as a consequence of the format
definition, this identifier will be typeset as \&{local} in all other
places. Another reason to change a category could be that an identifier is
in fact a typedef identifier, but \.{CWEAVE} cannot deduce this fact
(presumably the declaration occurs in some header file that is not scanned
by \.{CWEAVE}); in such cases one can use a standard defined type like
\&{FILE} or \&{size\_t} as the second argument to \:f. Finally, it is
possible that some \Cee~implementation uses additional, non-standard
keywords (or macros that behave as a keyword); such an identifier should be
formatted like a standard keyword that has a similar syntactic function as
it (which hopefully exists). In fact the identifier \&{va\_dcl}, which is
used in a convention for functions with variable argument lists that is not
part of \caps{ANSI/ISO}~\Cee, is nevertheless built into \.{CWEAVE}, because
there is no keyword that has the required syntax category (namely
\\{declaration}), so that it would otherwise not be possible to introduce
it; one can on the other hand easily undo the reservation by saying
`\&{format}~\\{va\_dcl}~$x$'.

Format definitions can also be used for a reason that does not have to do
with syntax analysis. There are two classes of identifiers that are parsed
like ordinary identifiers, but are nevertheless treated specially; these
classes consist initially of the identifiers \\{TeX} respectively \\{NULL}.
The main distinction of these classes is that their identifiers are typeset
differently, namely as \TeX~macros; the mentioned identifiers will therefore
be written to the \TeX~file as `\.{\\TeX}' respectively `\.{\\NULL}', which
causes them to be typeset as `\TeX' respectively `$\NULL$'. This mechanism
gives the user the ability to change the appearance of identifiers in any
desired way, simply by defining the macro appropriately. The class
of~\\{TeX} is intended for identifiers that are still alphabetic in
appearance (possibly with letters being accented or shifted), while the
class of~\\{NULL} is intended for identifiers that are represented by
mathematical symbols. Hence the \TeX~macro will be processed in
horizontal mode with italic font selected in the first case, and in math mode
in the second case. Simply saying `\.{@f alpha NULL}' suffices to make
\\{alpha} print as~$\alpha$; the format definition is typeset as
`\hbox{\&{format} \\{alpha} $\NULL$\quad($\alpha$)}' to make the
correspondence of the identifier and typeset symbol evident. 

Unlike \Cee~identifiers, \TeX~macros cannot contain underscores and digits.
On writing of the macros to the \TeX~file, underscores are replaced by~`\.x',
so that they will become part of the macro. Digits however are not changed,
so identifiers containing digits should not be put into the class of~\\{TeX}
or~\\{NULL} by a format definition, unless special care is taken: the macro
will only consist of the part up to the first digit. No index entries for
identifiers of the class of~\\{NULL} are recorded (the same holds for
keywords); on the other hand index entries for typedef identifiers are
recorded, despite the fact that they are formatted as keywords.

\subsection Text within \Cee~program fragments: comments and module names

Within the program part of a section, the input should basically follow the
rules of the \Cee~syntax, but amidst the \Cee~tokens there may also occur
module names and comments. In both cases the \Cee~code is temporarily
interrupted by a piece of ordinary text that is processed directly by~\TeX,
just like the \TeX~part of a section. In the case of module names this text
is delimited by \:<~and~\:>, in the case of comments by
`\.{/*}'~and~`\.{*/}'. So comments are actually valid \Cee~comments, but the
converse is not true: the contents of a comment is processed by~\TeX, so not
all \Cee~comments can be used without modification; a point to keep in mind
if one is converting ordinary \Cee~code to \CWEB.. Like \Cee~comments, the
comments of \CWEB. cannot contain the two-character sequence `\.{*/}'
(regardless of the \TeX~context, because comments are recognised before
\TeX\ even gets to see them). The sequence `\.{/*}' is forbidden as well,
which allows \.{CTANGLE} to warn the programmer about unclosed comments,
that might otherwise lead to particularly elusive errors. In the \TeX~texts
of comments and module names no control codes are allowed (except in
embedded pieces of \Cee~code, described below), but \:@ can be used to
represent the character `\.@' (this is true in all contexts); a module name
is terminated by the first occurrence of the code \:>. During the processing
of these \TeX~texts, line ends are replaced by spaces, which implies that
\TeX~comments (starting with `\.\%') cannot be used. (In the \TeX~part of a
section on the other hand, such comments can safely be used: they are
completely ignored by \.{CWEAVE}, and not even copied to the \TeX~file.)

The text for module names serves a dual purpose: apart from determining the
text representing the module in the printed output, it also serves to
identify defining occurrences of a module name with references to it. For
the latter purpose it is irrelevant how the contents of a module name will
be further processed; there should basically be a character-by-character
match. This rule is however alleviated in two ways to make matching easier.
First, any amount of consecutive white space is replaced by a single space,
and white space at either end of a module name is discarded. Second, an
abbreviation mechanism for module names may be used. A module name may be
specified by a prefix of the full name, followed by~`\.{...}'. A few
conditions must be satisfied to allow this mechanism to work. All
specifications of one same module name must be extensions of the one among
them of minimal length, which must not be a prefix of any other (full)
module name. All specifications of the name that do not end with~`\.{...}'
must be equal; there must be at least one such specification, which defines
the full module name of which all other specifications give a prefix.
Loosely speaking, the minimal specification is used for identification
purposes, and the maximal specification is used for typesetting all
occurrences. With the help of these rules, and a text editor, there should
be little reason to choose module names any shorter than what is needed to
express the function of a module clearly. There is a limit on the length of
a module name, but it is so generous that this could hardly be a problem:
1000~characters after replacement of consecutive white space characters by
single spaces.

The parser of \.{CWEAVE} normally assumes that references to modules stand
for (compound) statements, which is likely to be a valid assumption in the
majority of the cases (or at least one that does not upset parsing, for
instance when the module is actually a statement sequence).  Occasionally
however, one of two other syntactic categories applies instead, namely
\\{declaration} or \\{expression} (the remaining categories are extremely
unlikely). When this is the case, the programmer should make it clear to
\.{CWEAVE}, lest the parser might choke on the input and produce badly
formatted output. This can be done by placing the control code \:; once (for
a \\{declaration}) respectively twice (for an \\{expression}) directly after
the module name (in the latter case this also conveniently provides a
separation from any `\.=' or `\.{+=}' that might follow).

At the end of the \CWEB. document, after the index, a list will be placed of
all module names used. This list sorted lexicographically, with sorting
based on the source strings for the full module names, collated (unlike the
identifier index) in the order of the internal (\ASCII.) character codes.
For this reason it is a good convention to ensure that all module names are
already distinguished by a prefix consisting of alphabetic characters and
spaces only, of which the first word is capitalised; then the order of the
list will be natural and independent of any internal details that the reader
is not aware of.

\subsection \Cee~code within text: `\pb' fragments

In order to mention a piece of \Cee~code within \TeX~text, it can simply be
enclosed in vertical bar characters (`\.|'); then \.{CWEAVE} will format it
in a way similar to to \Cee~code of modules. This feature may be used in any
kind of \TeX~text except in limbo, i.e., in the ordinary \TeX~part of a
section, in comments and in module names. The piece of \Cee~code itself
should not contain any comment.

The ``lightweight'' construction with vertical bars resembles the math shift
characters (`\.\$') for \TeX's math mode, and indeed in simple cases like
`\.{|a[i+3]|}' the output would be identical if the `\.|' characters were
replaced by `\.\$'. The two modes should not be confused however: the
``\Cee~mode'' is implemented by \.{CWEAVE}, which translates the
\Cee~constructs before \TeX\ ever gets to see them; it often uses math mode
itself, and as a consequence it should never be used when \TeX\ is already
in math mode. The syntax used by \.{CWEAVE} is of a stricter kind than that
of \TeX's math mode, but it can still be used for some expressions that are
not quite proper~\Cee; in particular there is no objection to writing things
like $\\{begin}\Z p<\\{end}$, which humans understand better than compilers.
On the other hand an incomplete formula like `$\leq n$' (which can be used in
sentences, with the missing operand expressed in words) is better written as
`\.{\$\\leq n\$}' than as `\.{|<=n|}': the latter is not understood by
\.{CWEAVE}'s parser, and therefore the `\.{<=}' and the `\.n' are translated
separately with an ordinary space in between; the result looks reasonable,
but \TeX\ may very well decide to break the line at the space.

There is a lexical price to pay for using delimiters that are not control
codes: it is impossible to use character `\.|' in any piece of \TeX~text
where `\pb' constructions are allowed (even if one tries for instance to set
up a verbatim context, because \.{CWEAVE} acts before \TeX\ does). This
should not cause great problems however, since `\.|' is not a character in
ordinary text fonts, and for `\.|'~and~`\.{\\|}' in math mode, plain \TeX\
already has the substitutes `\.{\\vert}' and~`\.{\\Vert}'; for exceptional
text fonts (like typewriter type) that do have `\.|', the standard format
for \CWEB. provides `\.{\\v}' as a substitute (by means of \.{\\chardef})
for~`\.|'. Inside `\pb' one has a similar problem of not being able to write
the bitwise-or operator~`$\OR$' in the usual way. For this purpose \CWEB.
provides the control code~\:v to represent that operator (which you may also
use in an actual program fragment, although there is no need to do so
there). Note that the composite operators `\.{|=}'~and~`\.{||}' can be used
without problem; consequently no `\pb' should be immediately followed
by~`\.=' or by another `\pb'.

Although \Cee~comments are forbidden inside `\pb', it is possible to mention
a module in \TeX~text by enclosing the module name in vertical bars; this
\TeX~text can either be the \TeX~part of a section or a comment, but not
another module name. Mentioning a module in this way does not imply any
inclusion of the module body, so it is not considered to be a use of the
module; in the cross-references it is referred to as a ``citation'' of the
module.  For the module name itself the same rules apply as for other
occurrences of module names; in particular the abbreviation mechanism can be
used, and \.{CWEAVE} will automatically insert the relevant section number
in the module name. Citing a module may form an exception to the rule that an
occurrence of a module name when the \Cee~part of a section has not already
started must be a defining one. Since \.{CTANGLE} normally ignores the
vertical bars of `\pb' constructions together with the surrounding
\TeX~text, it needs a simple rule to decide whether a module is being cited
or defined. It does this by inspecting the next token (where a newline
counts as a token, but codes like \:; that are ignored by \.{CTANGLE} are
skipped): if this is `\.=' (or `\.{+=}' etc.), then it assumes that the
module is being defined, and if it is `\.|' that the module is being cited;
in other cases it signals an error (this could for instance happen if a \:c
code is missing). Therefore it is not really necessary that the module name
is the only item in the `\pb' construction, as long as it is the final item;
this extra freedom is not likely to be of much practical use, however.

\subsection Modules producing additional output files: `\/\.{@( {\dots} @>}'

As was mentioned before, there are special module names that will cause the
program produced by that module to be written to a separate output file.
Such a module name is specified by enclosing the file name in \:(~and~\:>;
in fact it is sufficient to use \:( instead of~\:< in just one occurrence of
the module name. The file name will be set in typewriter type by \.{CWEAVE},
so that the difference with an ordinary module name is easily perceived.
Although hardly relevant for this case, the compression of white space and
the abbreviation mechanism for module names also applies to these special
module names. The file name can contain any special characters, including
`\.|' and `\.@'; the latter must as always be doubled.

\subsection Control codes that help parsing in special situations:
	    \:;, \:[, \:]

In the discussion of the \&{format} command we already mentioned the way
\.{CWEAVE} parses and formats program fragments, and the fact that some
programming constructions can confuse the parser, leading to badly formatted
output. Like \:f, the control codes in this subsection provide ways to avoid
such problems, but they do so on a local basis in the code itself, rather
than by global definitions. They are mainly used in connection with macros
with replacement texts and/or arguments that are not expressions. Since
macro invocations look like identifiers or function calls, and macro
arguments appear to be function arguments, a piece of code containing a
macro invocation whose replacement text and arguments are not all
expressions may seem syntactically incorrect when not expanded. An example
of such a scenario is a macro whose replacement text is a compound
statement; an invocation of such a macro needs no semicolon following it,
and sometimes placing a semicolon would actually cause an error (e.g., if
the invocation is used as the first branch of an \&{if}-\&{else} statement,
since the semicolon would be taken to be an empty statement {\it after\/}
the conditional statement, and the \&{else} would be unmatched). Since the
parser of \.{CWEAVE} does not expand macros, it will fail to recognise a
macro invocation without a following semicolon as a statement, and like many
parsers it is not good at recovering from such a failure. Although no error
message is usually issued, formatting can be severely disrupted; indeed,
correct formatting will only be inserted locally for constructions that do
not contain the ``error'', so one unrecognised construction can easily
destroy the layout of the entire program fragment it occurs in.

\.{CWEAVE} provides some simple mechanisms for guiding the parser through
such unusual code, and by applying them in several ways nearly all problems
that arise in practice can be solved. One of these is the control code~\:;,
which produces no \Cee~code (nor any printed output), but which can be used
in places where the \.{CWEAVE} parser would require a semicolon for a
successful parse; another is the combination \:[,~\dots,~\:], used as
a pair of parentheses, which will cause whatever is enclosed to get the
syntactic category `expression', regardless of its actual category.

The most obvious use of~\:;\ is in the case already mentioned of a macro
invocation that expands to a (compound) statement: placing \:; after such a
macro invocation will cause it to be recognised as a statement by \.{CWEAVE},
keeping its parser happy while not affecting the actual \Cee~program. There
are other situations as well where one does not want to place a semicolon,
yet wishes \.{CWEAVE} to act as if it were there. If a macro stands for
statement that happens to end in a semicolon, then it is a good idea to
suppress the final semicolon in the definition: in that case all invocations
can supply the semicolon, and one does not have to remember writing \:;
instead of~`\.;' at the invocations of this macro. For instance, the macro
replacement text could be `\&{do}~\<statement>~\&{while}~(\<condition>)', or
`\&{if}~(\<condition>)~\<statement>~\&{else}~\<expression>', or even
`\&{if}~(\<condition>)~\<statement>~\&{else}', where the final \&{else} was
placed with the purpose of picking up the following semicolon as an empty
statement; in all these cases the macro invocation together with the
following semicolon is a complete statement that can be used without special
precaution, even as the first branch of an \&{if}-\&{else} statement.
However, in these cases the macro definition itself needs a bit of extra
care: a~\:; should be placed at the end to represent the semicolon that will
follow in invocations, so that \.{CWEAVE} can properly format the
replacement text of the macro. Finally, it there can be purely aesthetic
reasons for wanting to suppress a semicolon at the end of a `\pb'
construction, for instance when referring to a declaration as
`$\&{char}~\m*p$', which strictly speaking requires a final semicolon to
become a declaration; to let \.{CWEAVE} format this properly, one should
write `\.{\v char *p @;\v}'. Constructions like `$\&{return}~\\{home}$' and
`$\&{goto}~\\{sleep}$', which are fairly common to mention in module names,
would also fall into this category, but in this particular case no \:; is
necessary, since \.{CWEAVE} parses these as expressions, even though strictly
speaking they are not.

Since \:; is invisible in the output, yet can be sensed by the parser, it
can conveniently be used to pass information to the parser, and there are a
few instances of such use where it does not stand for a semicolon. We
already mentioned placing one or two copies of \:; after a module name to
indicate the syntactic category. Another use is to place it before a typedef
identifier to cause it to be treated as an ordinary identifier; this is
useful if the identifier is locally redeclared, or used as field selector in
a \&{struct} or \&{union} specifier. When the identifier is used as a tag
immediately after \&{struct} or \&{union}, or as a selector after
`$.$'~or~`$\MG$', it is not necessary to place \:; before it.

Unlike \:;, the control codes \:[~and~\:] themselves do not participate in
parsing. The material between them is parsed normally, which may or may not
succeed in recognising a single construct; then the pieces recognised are
concatenated (without separation), and the result is given the category
\\{expression} for the purpose of parsing further items outside. The most
obvious use of this mechanism is to encapsulate any arguments in a macro
invocation that are not expressions (e.g., some storage allocation macros
have a type as argument), so that the invocation can be parsed as a function
call. There need not be anything in between \:[~and~\:], so `\hbox{\.{@[
@]}}' can be used as an ``invisible expression'' in the same way as \:; can
be used an invisible semicolon. An example where this is useful, is a module
standing for an initialiser list, that is moreover defined in multiple
sections (see for instance the module `$\X157:Rules\X$' in the source
document for \.{CWEAVE}): it is natural to end each program fragment
defining a part of such a module with a comma, but this will not be parsed
properly unless an expression follows, which can be achieved by adding
`\hbox{\.{@[ @]}}'. Finally, if for some tricky piece of code none of the
mentioned methods suffice to get it parsed properly by \.{CWEAVE}, one may
use \:[~and~\:]  (followed by \:; if necessary) to minimise the damage: by
placing \:[~and~\:] around an appropriate part of the program containing of
the problem area, we can ignore the fact that the parser failed to recognise
it, and force it to continue as if it ad recognised an expression; thus we
can contain the problem, and prevent the effects from spreading any further.


\beginsection Invocation of {\tentex CTANGLE} and {\tentex CWEAVE}

The simplest form of calling \.{CTANGLE} and \.{CWEAVE} is to supply one
command line argument, which is the name of the \CWEB. source file without
the `\.{.w}' suffix. It is possible however to modify the behaviour of the
programs by selecting certain optional settings, and small patches to the
master source file can be achieved by supplying a ``change file''. The
general syntax for invoking \.{CTANGLE} is
$$ \hbox
{  \.{ctangle}\quad
   [$(\.+\mid\.-)$\<options>]\quad
   \<\CWEB. file>[\.{.w}]\quad
   [$(\<change file>[\.{.ch}]\mid\.+\mid\.-)$ \quad
   [\<output file>[\.{.c}]]]
}
$$
where square brackets indicate optionality, vertical bars separate
alternatives, and parentheses are used for grouping. Here \<options> is a
string of one or more characters designating options, as described below;
there may be more than one such string of options, and they may be given
between or after the files names instead of before them, with no difference
in meaning. For \.{CWEAVE} the situation is entirely similar, except that the
default extension for the output file is `\.{.tex}' instead of `\.{.c}'.

\subsection Command line options

A command parameter that starts with `\.+' or `\.-' and has at least one
more character, serves to control optional settings of the program being
invoked. The characters after the initial character `\.+'~or~`\.-' denote
individual options that are turned on respectively off; option characters are
case-insensitive. The character `\.i' forms an exception, since it is used
to supply a string argument rather than to set a switch; the string is the
remainder of the option string (following the `\.i'), and
`\.{+i}'~and~`\.{-i}' are equivalent. All option characters will be
accepted, but only the ones listed below have any effect on the operation of
the program. We list the switches in the direction that alters the default
setting.
$$\vcenter{\tabskip=1em \halign{\tentex#\hfil & #\hfil & #\hfil \cr
\omit\it switch& \it program& \it effect \cr
\noalign{\yskip}
-b & both	& do not write a banner line to the terminal \cr
-p & both	& do not show a progress report on the terminal \cr
-h & both	& omit confirmation of successful completion \cr
\noalign{\yskip}
-l &\.{CTANGLE} & omit \&{\#line} directives, make \Cee~file look nice \cr
\noalign{\yskip}
-x & \.{CWEAVE} & do not attach index and other information
		  at the end of the document \cr
+d & \.{CWEAVE} & report failure to completely parse pieces of \Cee~code \cr
+t & \.{CWEAVE} & write three files,
		  with separate ones for index and list of module names \cr
+e & \.{CWEAVE} & even out number of pages before table of contents \cr
\noalign{\yskip}
+i & \.{CWEAVE} & add alternative search path for header files
		  (takes argument) \cr
\noalign{\yskip}
+f & \.{CWEAVE} & force a line break after each statement \cr
+a & \.{CWEAVE} & force all statements to be on a line by themselves \cr
+u & \.{CWEAVE} & ``unaligned brace style'': do not align `$\{$' and `$\}$'
		  vertically \cr
+w & \.{CWEAVE} & ``wide brace style'':
		  force line breaks before and after `$\{$' \cr
+m & \.{CWEAVE} & ``merged declarations style'':
		  do not force line breaks between local declarations \cr
\noalign{\yskip}
 +c & both	& run in compatibility mode with \LKC. \cr
 +s & both	& show memory usage statistics at completion \cr
 ++ & both	& handle \Cpp~language instead of \Cee \cr
}}
$$
The options `\.{+d}'~and~`\.{+s}' only operate if \.{CWEAVE} or \.{CTANGLE}
was compiled with the preprocessor symbol \.{DEBUG} respectively \.{STAT}
defined (with most \Cee~compilers this can be accomplished by including a
command line parameter \.{-DDEBUG} respectively \.{-DSTAT} when compiling
the \CWEB.  system).

The options `\.b', `\.h', and `\.p' can be used to control the amount of
output that \CWEB. writes to the user terminal; the combination `\.{-bph}'
will eliminate terminal output altogether when no errors are encountered.

The option `\.{-l}' of \.{CTANGLE} is intended either for use with broken
compilers or debuggers that cannot handle \&{\#line} directives properly,
or for cases where the \Cee~file is of more importance than just as an
intermediate file, for instance when the program is transferred to
people who do not wish to practice \lp.. Apart from omitting \&{\#line}
directives and comments that indicate the section number from which code
originates, an attempt is made to make the \Cee~file more readable to humans:
the spacing and (almost all) comments of the source file are preserved in
the \Cee~output, and when modules are substituted into others, indentation
levels are accumulated, so as to produce indentation that looks natural.
Doubtlessly the result is not perfect (and lines may get quite long), but it
is definitely more readable than the output normally produced. Since layout
and comments of the source file need to be preserved by \.{CTANGLE}, this
option consumes significantly more memory than its contrary.

The option `\.{+d}' causes \.{CWEAVE} to issue a warning when it
could not properly parse some piece of \Cee~code; this could happen either
because a code fragment is incomplete in the sense that it does not
represent a single complete syntactic entity (as in the `\.{|<=n|}' example
above, or when a module body ends with a label without a following
statement), or because the code is actually unsyntactic, or because
\.{CWEAVE} has been fooled by an unusual construction. In all cases however
the result can be (very) badly formatted output, and a correction should be
made; users who care about the quality of the typeset output are advised to
always set this option (or at least when the document is being finalised).
Setting the `\.{+d}' switch is equivalent to placing a control code \:1 at
the beginning of the first section; the nature of the warning messages and
possible remedies will be discussed later in this manual.

The two output files that the option `\.{+t}' will cause \.{CWEAVE} to create
in addition to its main output file, are called \.{\<name>.idx} and
\.{\<name>.scn}, where \<name> is the name of the main output file without
its extension. These files will be read by `\.{\\input}' commands in the
main output file, so that the typeset document will not be any different; on
large projects however it can be helpful to have this information on
separate files, for instance for making a global index. The option `\.{+e}'
is intended for use with two-sided printers: it ensures that the table of
contents comes out on a fresh sheet of paper, so that it can conveniently be
moved to the front.

The option `\.{+i}' (or equivalently `\.{-i}') can be used to specify a
directory for \.{CWEAVE} to search for header files in \:h commands.
Although directory structures are system-dependent, \CWEB. assumes that a
file can be looked up in a specified directory by prefixing a string
indicating that directory to the file name (this works for many systems);
the desired prefix string should then be supplied as the remainder of the
option string after the `\.i' character. E.g., on the \caps{UNIX} system the
author uses, \.{CWEAVE} can be told about the location of the `Xlib' header
files by supplying an argument `\.{+i/usr/local/X11R5/include/}' (one could
replace `\.{+i}' by `\.{-I}' to make it look more like the similar option
passed to the \Cee~compiler); the important thing to note is the final
pathname separator `\./'. Up to~8 additional prefixes can be specified by
giving several such arguments; they will be tried in order from left to
right. It is also possible to fix one such prefix at compile time, by
defining the preprocessor symbol `\.{CWEBHEADERS}' to be the desired prefix
string when compiling the compilation unit \.{common.c} of \CWEB.; this will
behave as if it were the first prefix specified by a `\.{+i}'~argument.

The last five options mentioned will alter layout style of program fragments.
The option `\.{+f}' will result in a more vertical style than the default,
and `\.{+a}' will do so even more; the difference between them is that
`\.{+f}' will not force a simple statement to start on a new line if it
follows a label or the condition of an \&{if} or \&{while} statement,
whereas `\.{+a}' will start a new line in such cases. The option `\.{+u}'
selects a style in which corresponding opening and closing braces are
unaligned because a line break is inserted after~`$\{$' instead of before~it.
The option `\.{+w}' on the other hand selects a brace style that has more
vertical symmetry than the default one, since opening braces will appear on
a line by themselves, like closing braces; the price is that listings will
consume more paper. The option `\.{+a}' overrides `\.{+f}', and similarly
`\.{+w}' overrides `\.{+u}'.  Finally, the option `\.{+m}' is for people
(like the author) who are extremely keen on saving paper: it avoids forced
line breaks between the declarations in a compound statement, just like they
are not placed by default between the statements; the separation between
declarations and statements within a compound statement is still indicated by
a line break, that even has some extra vertical space, because this
separation is significant in the \Cee~syntax (unlike the \Cpp~syntax).

In compatibility mode, specified by `\.{+c}', both \.{CTANGLE} and
\.{CWEAVE} modify their behaviour in such a way that they try to ensure that
they can handle any file that can be correctly processed by \LKC., and that
the output is an equivalent \Cee~program, respectively a valid \TeX~file
(this is the hard part) that produces a comparable printed document. In the
current version this claim can only be made for programs written in~\Cee; a
wholehearted attempt to do the same for \Cpp~programs would cost a
substantial amount of extra work. There are so many differences in the
details of formatting between \CWEBx. and \LKC. that one cannot expect
formatted output that is identical to what would be produced under \LKC.,
but to get the best approximation, one should in addition to~`\.{+c}'
specify the options~`\.{+uft}'.

The option `\.{+s}' is included because the \CWEB. utilities use statically
allocated memory areas, which may therefore run out; using this option one
can see how close one is to the limits of \CWEB.. The most important limited
resources that it provides information about are are: \ (a)~The name tables
in which \.{CTANGLE} and \.{CWEAVE} store all distinct identifiers and index
entires, respectively module names (the entries `identifiers', `module
names', and `bytes'); \ (b)~\.{CTANGLE}'s main memory, in which the complete
\Cee~program file processed during a single run has to be stored, albeit in a
compactified form (`replacement texts' and~`tokens'); \ (c)~\.{CWEAVE}'s
cross-reference memory, in which all the data for the index and list of
module names are stored (`cross-references'); \ (d)~its parsing buffers,
which must be able to hold any one program fragment or piece of
\Cee~code (`scraps', `texts', and~`tokens'). There should be no immediate
need to increase the size of these memory areas, since even for the main
program of \.{CWEAVE}, the largest of \CWEB.'s own compilation units, the
use of any of these resources is less than a third of the amount available.
There is one resource of which a larger fraction is used, namely `trie
nodes', but its usage depends only on the set of grammar rules used, which
is independent of the particular \CWEB.  source file.  When for some source
file \CWEB. is approaching its limits, one can of course try to recompile
\CWEB. with larger arrays, but alternatively one may restructure the source
file: when one of (a),~(b), or~(c) runs out, one might consider breaking up
the file into several separately processed pieces; when (d) runs out, a
remedy could be splitting up some huge module body into smaller ones, by
introducing submodules or multiple definitions of the module.

Switching to the \Cpp~language has only a minor influence on the operation
of \CWEB.: one-line comments starting with `\.{//}' will be recognised, the
main output file produced by \.{CTANGLE} will have default extension `\.{.C}'
instead of~`\.{.c}', and \.{CWEAVE} will recognise a few more reserved words
and use a slightly different syntax. Since there is no general agreement
about the proper extension for \Cpp~files, and alternative default extension
for \Cpp~mode (instead of \.{"C"}) may be built in by setting the
preprocessor symbol \.{CPPEXT} to the desired string (that should not
contain the leading period) when compiling \.{common.c}. Currently the
\.{CWEAVE} grammar will handle only a basic subset of the \Cpp~language,
which does not include templates or exception handling.

\subsection File name arguments

Any command line arguments that do not have the form of an option are taken to
indicate file names; their number can vary from 1~to~3. The first one specifies
the main source file, the second (if present) indicates the change file, and
the third optionally defines a non-standard name for the main output file.
The contents and function of the change file is discussed in the next
section; here we we just indicate how the actual file names used are derived
from the given file name arguments. As far as \CWEB. is concerned a file
name is composed of a base name and an extension. Loosely speaking, the
extension of the main file defaults to~`\.{w}', that of the change file
to~`\.{ch}', and that of the output files to `\.{c}' or `\.{tex}' for
\.{CTANGLE} respectively \.{CWEAVE} (but see also the discussion of the
`\.{++}' option above); the base names of the change file and the main
output file default to that of the main file. If in place of a change file
name an argument `\.-' is specified, no change file is used; also if only
one file name argument was given, or if the change file name was specified
as `\.+', then the default change file name is tried, but if no such file
exists, processing proceeds without a change file. (Specifying the change
file as `\.+' is only useful if a third file name argument is given.)
Therefore, assuming regular naming conventions, there is no need to specify
more than the main file name without extension, whether or not a change file
is being used.

The precise rules are as follows. On file systems where an extension is not
a standard property of file names, like that of \caps{UNIX}, it is assumed
the a period is a valid character in file names; a full file name is then
formed by concatenation of the base name, a period and the extension (note
that this implies that on such systems \CWEB. cannot access files whose name
contains no period at all). Conversely, a string designating a full file
name is broken up into a base name and an extension at the last occurrence
of a period; if no period is present, then the string is taken to specify a
base name only, and is said to have no extension. If the first file name
argument has an extension, it specifies both base name and extension of the
main source file, otherwise it specifies the base name, and the extension is
taken to be~`\.w' (if no such file is found, the extension `\.{web}' is also
tried, but this feature is obsolete). The base name of the main source file
is also the default base name of the change file and the main output file;
their default extensions are as described above. If a second and possibly
third file name argument is present and is not `\.+'~or~`\.-', it overrides
the base name, and also the extension if it has one, of the change file
respectively of the main output file. No change file will be used either if
the second file name argument is `\.-', or if no change file is found when the
second file name argument is `\.+' or absent.


\beginsection Subsidiary input files and change files

As we have described it so far, the \CWEB. tools read a single source file,
from which a main output file and possibly some auxiliary output files are
produced. Since \Cee~programs can be built from several compilation units,
it is not uncommon that several \CWEB. source files contribute independently
to the same program, and there might be non-\CWEB. source files as well.
However, even what is conceptually a single \CWEB. source, described by a
single printed document, may in fact be composed from several input files.
Two mechanisms are provided for combining information from several files,
with different purposes. First, subsidiary files may be read in from the
main source file in a way similar to the way \&{\#include} files are handled
by a \Cee~compiler. In the case of \CWEB. however, the main purpose is
usually not to share information among several sources, but merely to allow
breaking up large source files into more easily manageable parts. Second
there is the change file mechanism already mentioned above, which serves to
install system dependent patches to a master source, allowing that master to
remain free of system dependencies.

When a line of the form `\.{@i}~\<file name>' appears in a \CWEB. source
file, \CWEB. will read in the indicated file at that point, and continue
reading at the next line when it reaches the end of the subsidiary file. The
\<file name> may either be delimited by white space, or be enclosed in
double-quote characters (but not in angle brackets). Source files may be
nested in this way up to 10~levels deep. Nothing in the printed \CWEB.
document will indicate the switch from one source file to another, nor will
there be any effect on the \Cee~file(s) written by \.{CTANGLE}, except that
\&{\#line} directives will of course always point to the proper point of
origin for each piece of code written to such files.

Like for header files, there is a way to indicate that if a file included by
\:i is not found in the current directory, an alternative place can be
tried; unlike header files however there is relatively little need to use
this facility, unless one has files that are useful to include identically
in more than one project. At most one alternative place to search can be
given, and it is specified by a prefix to be applied to the file name, in
the same way as for header files. This prefix may either be compiled into
the \CWEB. programs by setting the preprocessor symbol \.{CWEBINPUTS} equal
to that string when compiling \.{common.c} (analogously to \.{CWEBHEADERS}),
or it can be specified at run time by setting the environment variable
\.{CWEBINPUTS}; when both methods are used, the latter takes precedence.

The change file, if present, contains a sequence of ``changes'', each of
which specifies the replacement of one or more lines from the main input
stream by another set of lines. Each change has the form `\.{@x} \<original
lines> \.{@y} \<replacement lines> \.{@z}', where each of the codes \:x,
\:y, and~\:z occupies a line by itself. The \<original lines> is a non-empty
set of lines that should match exactly with some sequence of lines in the
main input stream (except for the fact that trailing white space on any line
is ignored). Furthermore, different changes should affect non-overlapping
sets of lines, and their order in the change file should be the same as that
of the parts of the main input stream that they replace. For each change in
succession, a sequence of lines matching \<original lines> is searched for,
and replaced by the corresponding \<replacement lines>; like for \:i file
insertions, the resulting stream of lines will be processed in the usual way
as if it constituted a single \CWEB. source file. The ``main input stream''
referred to here is the result of (recursively) inserting any auxiliary
files indicated by \:i lines into the main \CWEB. source file. It therefore
makes no sense to specify \:i in the \<original lines>, nor is \:i allowed
in the \<replacement lines>: it should simply not occur anywhere in the
change file. On the other hand it is legitimate for the \<original lines> to
match a sequence of lines coming from more than one physical source file.

The fact that input is temporarily switched to the change file is not
entirely transparent to the \CWEB. document, as it was in the case if \:i
files: \.{CWEAVE} will mark all sections that were modified under control of
the change file, by attaching an asterisk to their section number, and to all
references to that number. (If some changes should add or remove entire
sections in the middle of the \CWEB. source, which is allowed although not
encouraged, then the section numbering will be altered, but sections for
which this is the only change will not be flagged with an asterisk.) If one
is only interested in sections that are modified, then it is even possible
to restrict printing to only those sections, by including the \TeX~command
`\.{\\changesonly}' in the text in limbo, preferably by means of the change
file.

In order to facilitate efficient implementation of the change file
mechanism, an additional constraint is placed on the changes: once an exact
match of a line in the main input stream with the first line of a change is
found, the remaining lines of the change (up to the \:y) should also match.
Any empty lines immediately following \:x are not used for matching (and are
in fact completely ignored) so the first matching line is never an empty
one; it is preferable to choose changes such that their first line matches a
unique line of the main input.  It is a good idea to start changes in the
\TeX~part of sections (after all, if the program changes, so should its
explanation); in this case uniqueness of the match of the first change line
can always be ensured (even when the \TeX~part is empty) by placing a
\TeX~comment in the main input, that serves merely as a target for
replacement by the change file.  All text in the change file that is not
part of a change is ignored, except that there should be no lines starting
with \:i, \:y, or~\:z; this text can be used for instance to explain the
purpose of the change to the person installing the program on a new system,
rather than to the ordinary reader of the program.

As we have said earlier, the change file mechanism provides an alternative
to system dependent conditional compilation, and it is usually a much more
elegant way to incorporate system dependencies. The main reason for this is
that one does not have to anticipate all possible systems that a program
could be ported to, nor is the main source polluted by such considerations:
it suffices to provide a separate change file each time the program is moved
to a system with different system dependent requirements. Users of a
particular system need to know about the change file for that system only,
and the responsibility for maintaining main source and the change file might
lie with different persons; additional effort is only required when the main
source changes in such a way that a change file fails to match.

One should not get carried away by the benefits of change files though: they
provide only a rather crude mechanism (due to the inflexible matching
rules), and if there are many changes, they will become difficult to
maintain when the master file evolves. Portability is still best obtained by
limiting system dependent features as much as possible, and if inevitable,
confining them to some well defined part of the program. If one should wish
to create variants of a program that involve significant changes, then
writing extensive change files is probably not the best way to go. This
method could lead to a form of ``rigor mortis'' for the original version of
the program, caused by fear that any alterations could upset one of the
change files, even trivial changes that only involve the commentary, or even
just the layout of the source file. A better approach would be to collect
routines of general utility as much as possible into separate compilation
units used by all variants, and to complement these with completely
independent compilation units to define the specific behaviour of each of
the variants. It is certainly pointless to use a change file for such things
as bug fixes or further development of a program; the whole idea is that
such modifications can be made in the master file while the change files for
various systems need little or no adjustment.

The codes \:i, \:x, \:y, and~\:z of this section have the appearance of
control codes, but they are not really part of the \CWEB.  language, and
obey different rules than control codes. For instance, they are line
oriented (and rightly so, since their goal is to select which lines will be
actually processed by \CWEB.): they should appear at the beginning of a
line, and any further text on the line (in case of \:i, after the file name)
is ignored. Also they act quite independently of \CWEB.'s current mode of
operation: rules such as the one forbidding control codes in limbo do not
apply to these codes.


\beginsection Control codes for advanced or emergency use

In this section we discuss control codes that are not essential for everyday
use of \CWEB., but are provided to enable either refinements in the
presentation of the \CWEB. document, or special manoeuvres to deal with
certain unusual situations or requirements. Most of them serve to allow the
programmer some form direct control over the contents of either the \CWEB.
document, the \Cee~file, or the source file, bypassing the automatic
processing by which these are normally related to each other; there are also
a few that serve as debugging aid, eliciting explicit information from the
\.{CWEAVE} parser about its actions.

\subsection Control codes for cross-referencing:
            \:!, \:\^, \:., \:?, \::, \:\#

Some control codes are provided that allow the programmer to influence
indexing and to perform explicit cross-referencing. The codes in this
subsection are the only ones that are allowed to occur in the \TeX~part of
sections, outside `\pb'; with the exception of~\:\#, they can also be used
in \Cee~text. Control codes such as these, that are intended only to affect
the printed document, are ignored completely by \.{CTANGLE}. Incidentally,
cross-referencing in \CWEB. always means referring to section numbers rather
than to page numbers: \.{CWEAVE} cannot know about page numbers since these
are determined only at the \TeX\ processing stage. It would be possible to
have \TeX\ produce a table mapping section numbers to page numbers; in fact
the table of contents provides a coarse approximation to such a map.

Whenever \.{CWEAVE} can determine from the context that an occurrence of an
identifier is a defining one, it will make the corresponding section
reference in the index underlined. If some case is missed by \.{CWEAVE}'s
normal rules, or if one wants to make a reference to a reserved word (which
is only made if it is underlined), then one can place the code \:! in front
of the identifier to create an underlined reference. Cases where this may be
required include arguments of functions with an old-style (pre-\caps{ANSI})
heading for which no declaration is given before the function body (i.e.,
the default type \&{int} applies), and enumeration constants that appear out
of context of the \&{enum} keyword (e.g., because the enumeration list
is given as a separate module). In general, the occasions where one needs
\:! are quite rare.

A group of three codes serves to include additional entries in the index,
amidst those generated automatically by \.{CWEAVE} for identifiers. It may
be useful for instance to maintain references to concepts like `system
dependencies', or to all error messages that can be generated. The three
codes are \:\^, \:., and~\:?; they differ only in the way the index entry
will be typeset. In each case the index entry is specified as a control text
terminated by \:>; control code and control text will be removed by
\.{CWEAVE}, but the control text will appear in the index, followed by the
section number(s) where the control code occurred.  For \:\^,~\:., and~\:?,
the index entry will be set respectively in roman type, in typewriter type,
and as argument to the control sequence `\.{\\9}' (which is undefined in the
standard format, but which the programmer may define in limbo). The first
possibility is most suited for general concepts, the second for strings that
occur in the program, and the third for any further special purpose one may
think of.  These control codes can be put either in the \TeX~part of a
section or within \Cee~code; the effect will be the same, but this allows
the programmer to put the control code in such a place that it is most
likely to remain in the right place in case the section should be
reorganised and possibly subdivided. Like for references to identifiers, one
can make an index reference underlined by prefixing the corresponding
control code with~\:!.

Unlike the control text forming a module name, the control texts discussed
here (as well as those that have not been introduced yet) should be
contained in a single line of input; also, no spaces are contracted or
removed. The control texts are passed unchanged to \TeX\ (with only `\.{@@}'
being undoubled as usual), so that they can use \TeX~commands for special
effects. Inside `\.{@.\dots@>}' one can get the special characters occurring
in `\.{\#\$\%\^\&\{\}\~\_\\}' by prepending a backslash, `\.{\\v}' gives a
vertical bar~`\.\v', and `\.{\\ }' gives a visible space `\.\ '.

The control texts are also used as a sort key to determine the place in the
index where the entry appears. Different occurrences of these control codes
are combined in the index only if there is an exact match of both control
code and control text, and no merging takes place with identifiers whose
name happens to be equal to the control text (however, their relative order
in the index is unpredictable). In sorting, a collating sequence is used
that differs from the standard \ASCII. order: alphanumeric characters appear
at the end of the sequence, with upper and lower case being considered
equivalent, and the space character appears at the beginning of the
sequence. In case there are entries that cannot be correctly positioned by
ordinary means, the following trick has been suggested by Knuth: define
`\hbox{\.{\\def\\9\#1\{\}}}' and represent the tricky entries as
`\.{@?\<sort key>\}\{\<\TeX~code>@>}', where \<sort key> contains
sufficiently many characters to uniquely determine the position of the entry
in the index, and \<\TeX\ code> produces the index entry itself; this works
because \.{CWEAVE} will write the index entry
`\.{\\9\{\<sort~key>\}\{\<\TeX~code>\}}', which ``expands'' to
`\.{\{\<\TeX~code>\}}'.

Besides references from the index, \.{CWEAVE} provides cross-references, in
the form of the section numbers that link the (first) defining occurrence of
a module name with the places where it is used and cited. There is also a
mechanism for the user to explicitly state similar cross-references in the
\TeX~part of a section, so that it is possible make a reference to another
section (where some related matters are treated), that will remain correct
if sections are renumbered. The mechanism is simple: in the section referred
to, one places the control code~\::, followed by a control text serving as a
label, and at the place of reference one uses \:\#, followed by the
identical control text (both control texts are terminated by~\:>). The rules
for placing \::\ are the same as for \:\^ and its relatives, except that
\:!\ has no effect here; the control text will not appear in the index, and
there is no conflict when the same string is used as an identifier or index
entry.

For~\:\# and its control text, \.{CWEAVE} basically substitutes the section
number of the matching \::~code, but because there might be multiple
occurrences of \:: with the same control text, the precise replacement rule
is a bit more complicated. The replacing text is precisely what would follow
``See also section'' in a cross-reference for a module name: one or more
section numbers in increasing order, separated by commas and ``and'' as
appropriate, and preceded by a space and, in case there is more than one
section number, by an `\.s' before that space. This is set up so that a
reference of the form `\.{section@\#label@>}' will generate a proper
reference, whether or not there are multiple definitions of the label. One
can also use `\.{\\Sec@\#label@>}' since in the standard format `\.{\\Sec}'
expands to `\Sec' and `\.{\\Secs}' to `\Secs' (in this case the space
produced by~\:\# is ignored after the \TeX\ control sequence); by defining
other \TeX~macros one could do anything one likes with the text provided
by~\:\#. Although \:\# cannot be used directly in comments and module names,
it is possible to capture its text in a macro definition (within a
\TeX~part) and use that macro instead.

\subsection Control codes for layout in programs:
	    \:,, \:|, \:/, \:), \:\\, \:+, \:;

As we mentioned before, \.{CWEAVE} formats the program fragments and pieces
of \Cee~code by inserting formatting controls in the the output based on a
syntactic analysis of the \Cee~tokens of the program fragments; in
particular the layout of the code in the source file is completely ignored.
Although this automatic formatting usually works well provided that
\.{CWEAVE} succeeds in parsing the program fragment (possibly with help of
some codes already discussed), there may still be occasions where one is not
quite satisfied by the result. If one wishes certain constructions to be
systematically treated in a different way, then a more pleasing style might
be available by calling \.{CWEAVE} with certain options set; if not, then
there is always the possibility of changing the grammar or layout rules of
\.{CWEAVE} (that program was written in a way that tries to make this as
easy as possible, but it still requires some careful study of the relevant
chapters of the \.{CWEAVE} source document). However in some cases one
simply wants to override the general rules in specific cases by adding or
removing a few formatting controls. There are a number of control codes
which can be used to do that. These codes are ignored by~\.{CTANGLE}; since
most of them deal with line breaks, their importance for `\pb' fragments is
minimal.

The control code \:, will insert a thinspace (a small amount of horizontal
white space) where it is placed. Within an statement \:| may be used to
indicate a place where a line break may be optionally taken (with no
associated penalty), when the statement is too long to fit on a single line.
Note however that optional breaks are already allowed at most operator
symbols, with a penalty that increases with the operator priority and the
number of enclosing parentheses, so \CWEB. will almost always succeed in
finding very a reasonable break point in long expressions. A line break can
be forced by~\:/; this can be used for instance between statements (if line
breaks are not already forced there), in order to group related statements
on one line rather than simply as much as possible. The code \:) will also
force a line break, and in addition create a bit of vertical white space to
give an even more visible separation. (\.{CWEAVE} will never issue more than
one line break on the same place, so there is no problem if a line break was
already present on that spot.) The code \:\\ is another variation: it forces
a line break and backs up the next line by one indentation unit. It is
useful before a module name that represents one or more cases in a
\&{switch} statement: this will make the name line up with the case labels.

Finally, \:+ cancels any (forced) line break that might be inserted by
\.{CWEAVE} at the point where it is placed, and replaces it by a space with
optional line break (the kind of space that is usually inserted between
statements). Its main use is to force small conditional or loop statements
onto a single line when \.{CWEAVE} would otherwise use a multiple-line
layout. Because the line can still be broken at the inserted space, such
one-liners do not make it impossible to retypeset the program in a narrower
column. A warning is in place however if, as a result of applying \:+, a
substantial stretch of \Cee~code is void of forced breaks, and that code
contains constructions that affect the indentation level. \TeX nically
speaking, the indentation at optional breaks is governed by the hanging
indentation parameter of \TeX, whose value is constant throughout a
paragraph, which in this case is everything between two forced breaks; under
the mentioned circumstances the amount of indentation at optional breaks can
be unexpected and inappropriate.

For convenience, an alternative method is provided to fit compound
statements on a single line, and similarly for \&{struct} and \&{union}
specifiers. Instead of writing \:+ on every place where \.{CWEAVE} would
otherwise force a line break (which incidentally depends on the chosen
layout style), it suffices to place \:; immediately after the opening brace.
This will activate a different set of layout rules than is normally used,
which will not insert forced breaks between the declarations and statements
of the compound statement, respectively between the fields of the \&{struct}
or \&{union} specifier. In the case of a compound statement, any forced
breaks caused by conditional or loop statements appearing directly inside
the compound statement are also avoided (but nested statements are not
affected, so they should be handled separately if present, possibly using
another~\:;). Compound statements starting with `\.{\{@;}' will be treated
as if they were simple statements in further parsing, which may affect
formatting; for instance, if the statement is the branch of a conditional it
will be placed on the same line as the \&{if} or \&{else} controlling it.
If this is too much of a good thing, a forced break may be explicitly
inserted at the beginning and/or end of the compound statement; in fact the
sequence `\.{@/\{@;}' is a fairly common one.

There is another use of~\:+, which does not cause any breaks to be
cancelled, but where on the contrary the purpose is insert white space.
It applies when a long string constant is needed, for which the
string-break feature is used: a sequence of strings separated by white space
only will be concatenated by the compiler into a single string. Although
\.{CTANGLE} will correctly insert a space between any two consecutive
strings, \.{CWEAVE} (guided by syntax rather than by lexical structure) will
simply juxtapose them; by inserting \:+ between the strings, one guarantees
that in the printed document there will either be a horizontal separation or
(if the constituent strings themselves are already long) a line break.
Incidentally, if the problem of breaking a string is in the source file
rather than in the printed output, one can use the traditional solution of
an escaped newline within the string; \.{CWEAVE} will treat this as if the
parts of the string were on the same source line. If one should create a
string in this way that does no fit on a single line of output, a break will
be introduced automatically at a some point, which will be typeset as if a
string-break was used. In very long strings however it is better to write
string-breaks explicitly; for strings broken only by escaped newlines, the
same length limit holds as for module names (1000~characters).

\subsection Codes for special items in\/ \Cee~code:
	    \:p, \:v, \:t, \:\&, \:=, \:'

Contrary to \TeX~text, pieces of \Cee~code are broken up into tokens by both
\.{CTANGLE} and \.{CWEAVE}, stored internally and output at some later time
after having undergone some processing. This makes it potentially difficult
to put something into \Cee~code that \CWEB. is not prepared to handle. Since
\Cee\ is a much more regular language that \TeX, occasions where one would
need to do such a thing should be quite rare, yet some escape mechanisms
have been provided, which we treat in this subsection.

The code \:p can be used to explicitly specify the place where the
preprocessor directives generated by \:d and \:h commands will be placed in
the \Cee~file. Multiple use of \:p is allowed; as soon as it is used at
least once, the default placement at the beginning of the \Cee~file is
cancelled. This code provides the only way to write the directives generated
by \:d and \:h to an auxiliary output file. In the formatted output this
code is represented by the pseudo-module `$\ATP$', which (like preprocessor
directives embedded in a program fragment) is set on a separate line and
does not otherwise affect the formatting of the surrounding code.

Two other codes are intended mainly for use within `\pb'. As mentioned
earlier, \:v represents the bitwise-or operator. The code \:t is followed by
a control text, which can be used to insert any \TeX\ symbols into a
\Cee~expression; the result gets category \\{expression} but (if used in a
program fragment) does not produce any actual \Cee~code. It is for instance
possible to obtain `$\\{phi}<\hbox{$\pi$}/\T{2}$' by writing
`\hbox{\.{| phi < @t\$\\pi\$@> / 2 |}}', or if one prefers, to get
`$\\{phi}<\hbox{$\pi\over2$}$' by writing `\hbox{\.{| phi <
@t\$\\pi\\over2\$@> |}}'. The control text is put into an \.{\\hbox} that
will appear at the specified point in the formula.  One might imagine using
\:t as a means to sneak in \TeX\ commands that will modify the formatting
produced by \.{CWEAVE}, but this is strongly discouraged unless one
thoroughly understands that formatting and the way it is obtained.

The codes \:\& and \:= are intended as a means to alter or bypass the
processing of \Cee~tokens by \.{CTANGLE}; they should only be used in very
exceptional situations. The code \:\& forces \.{CTANGLE} to output the
symbols to the left and right of it directly adjacent to each other. Normally
\.{CTANGLE} inserts space between two symbols if it thinks this is necessary
for lexical reasons, regardless of whether a space was present in the input.
Items with a lexical structure unknown to \.{CTANGLE} might confuse it, so
that it would output a spurious space; this space could then be eliminated
by~\:\&. For instance, an earlier version of \.{CTANGLE} would not recognise
`\.{1000000UL}' as a constant, and consequently it output a space before
the `\.U', so that the \Cee~compiler could not recognise it either; this
problem could then be remedied by inserting~\:\&. No similar cases are known
for the current version of \.{CTANGLE}.

The code \:= can be used to place some text in the \Cee~file that \.{CTANGLE}
will not produce by ordinary means: the control text following~\:=, up to
the next \:> is copied verbatim to the \Cee~file (with `\.{@@}' undoubled as
usual). If some special compiler activity, or some action by another tool, is
triggered by the occurrence of some special form of comment in the \Cee~code,
then such a comment can be placed using \:= (normally comments are removed
by \.{CTANGLE}). Also, should \.{CTANGLE} unjustly decide that two symbols
need no space in between them, then a space can be forced by writing
`\hbox{\.{@= @>}}'
\unskip\footnote{${}^\dagger$}
{One case where this would be necessary is the famous example
 `$\T{\^123E}+\T{1}$': the \Cee~standard states that unless a space is put
 between the `\.E' and the `\.+', the preprocessor should treat this as a
 single number (a~kind of mixture of a hexadecimal and a floating point
 constant), which turns out not to be valid, causing an error. \.{CTANGLE}
 however never places a space between an identifier and an operator (even if
 one was present in the input), so the way to get this expression properly
 through the compiler is to write `\hbox{\.{0x123E @= @> + 1}}' (since this
 bug is now documented, it has become a feature).
}.
The control text will be set in typewriter type and
framed in a box by \.{CWEAVE}, so that it stands out clearly; it is
syntactically neutral (like a comment).

Finally, the code \:' can be used to introduce a single-character constant,
in the same way as the character `\.'' does in~\Cee. The difference between
the two ways of specifying this value is that \.{CTANGLE} will replace
\.{@'}$c$\.' by the (decimal) numeric \ASCII. value of the character~$c$,
whereas \.'$c$\.' is passed on to the \Cee~compiler, which will evaluate it
to the same value. The feature is therefore of little use in the current
version of \CWEB., which assumes the \ASCII. character set, but is provided
as an aid in writing programs that will be easier to port to non-\ASCII.
versions of \CWEB.. In such systems \.{CTANGLE} should still use the \ASCII.
code to compute \.{@'}$c$\.', while \.'$c$\.' represents the internal code
for~$c$. The idea is that one can then (as is done in the program \TeX) map
all characters on input to their \ASCII.  equivalents, perform all internal
manipulations independently of the externally used character set, and
convert back to that code on output.

\subsection Control codes behind the scenes: \:s, \:q, \:l

The control codes of this subsection have in common that their use is never
essential, but can be convenient in some situations, and is largely or
completely invisible in the \CWEB. document. They are also the only control
codes allowed in limbo.

The code \:s has the same effect as \:f, but produces no output in the \CWEB.
document. It can be used as a subsectioning code, just like \:f, but no
comment should follow the two identifiers it applies to in this case (since
there is nothing to attach the comments to); alternatively \:s can be used in
limbo. In either case the format definition is noted but nothing is written
to the \TeX~file. One might prefer to use \:s in situations where showing a
\&{format} definition is considered to be more distracting than informative.
Also, if a header file~$h$ is included by \&{\#include} rather than by \:h
or is located in a place where \.{CWEAVE} cannot find it, and it contains
typedef declarations, then~$h$ could be accompanied by a file containing a
line `\hbox{\.{@s ident FILE}}' for each typedef identifier defined in~$h$,
which can be read in by means of \:i by any \CWEB. file that includes~$h$.
This method of passing information between files is more error-prone than
having \.{CWEAVE} scan the header file however, so the latter method is to
be preferred whenever possible.

The code \:q is followed by a control text, and is completely ignored both
by \.{CTANGLE} and \.{CWEAVE}; it can be used either in \TeX~text (even in
limbo) or in \Cee~code. It can be used to make comments relevant only when
the source file itself is being read, particularly within \Cee~code, where
\TeX~comments cannot be used for this purpose. For instance, it can be used
to put a descriptive or identifying comment at the beginning of a file
included using \:i. This code can also be used to accommodate any other
tools than \.{CTANGLE} and \.{CWEAVE} that might inspect the source file,
e.g., if a text editor tries to match braces and the like, it is unlikely to
correctly handle the complicated lexical structure of \CWEB. files in all
cases, and an occasional brace contained in a \:q control text may help to
keep it happy.  Such occurrences of \:q are best removed however when source
files are made public.

The code \:l is used to allow certain 8-bit characters (i.e., characters
with values in the range 128--255) to be used in identifiers. Doing so is
only useful if measures are taken to ensure that \TeX\ can handle these
characters properly. \TeX~version~3.0 and newer can handle 8-bit characters
in the input, but the standard fonts do not have any characters in positions
128--255, so one has to either load other fonts that do have characters in
those positions, or define such characters to be active characters that
somehow produce an appropriate glyph in the current font. For identifiers
the relevant font is text italic (selected by `\.{\\it}'), but if these
characters are available for identifiers, one will probably also want to use
them in \TeX~text (including module names and comments), so other fonts
should be provided for as well. \.{CWEAVE} does not take any special
measures for 8-bit characters, and just passes them on to \TeX\ (when they
occur in \Cee~code outside comments and module names, they are assumed to be
part of an identifier). However, since such characters cannot be used in
actual \Cee~identifiers, \.{CTANGLE} must replace them by characters that
are valid in \Cee~identifiers (letters, digits, and underscores). The
code~\:l can be used to specify which translation \.{CTANGLE} is to use for
a given 8-bit character. The code should only be used in limbo, and have the
form `\.{@l}~\<char number>~\<translation>', where \<char number> specifies
the character by a pair of hexadecimal digits in the range \.{80}--\.{FF}
(without leading `\.{0x}'), and \<translation> is a string of up to~9
characters that are valid in \Cee~identifiers, terminated by a space. While
copying limbo material, \.{CWEAVE} replaces \:l by `\.{\\ATL}'; its default
definition will make `\.{@l}~fc~ue~' print a paragraph saying `{\bf letter
\\{\"u} tangles as \tentex "ue"}', assuming that `\hbox{\.{\{\\it\\char
"FC\}}}' indeed produces `\\{\"u}'; by stating `\.{\\noatl}' the definition
can be changed so that nothing appears at all.

\subsection Control codes for tracing {\tentex CWEAVE}:
	    \:0, \:1, \:2, \:3

As will have become clear by now, the most sensitive part of \CWEB. is
\.{CWEAVE}'s parsing mechanism, and occasionally something may go wrong
with it, so that an awful result is produced. We have already discussed the
means available for corrective action, but sometimes it can be a problem to
find out just what is causing the trouble. Sometimes the reason is an actual
syntax error, which is best located by applying \.{CTANGLE} and a
\Cee~compiler to the \CWEB. source, but as noted before, \.{CWEAVE} may have
a problem that a \Cee~compiler does not experience. For this reason, its
parser can produce diagnostic messages on the terminal, showing details
about its actions and any anomalies found. The amount of diagnostics
produced is controlled by a level that may take values from~0 to~3, and can
be selected by one of the control codes \:0, \:1, \:2, and~\:3. These codes
can be placed in the \TeX~part of sections or within \Cee~code, and they
determine the level until the next such code or the end of the file; the
initial level is~0, or~1 if \.{CWEAVE} was called with the option~`\.{+d}'.
Since a complete \Cee~fragment is read in before parsing starts, the level
is constant throughout each fragment, and determined by the value at the end
of the fragment.

The diagnostic output uses abbreviations for syntactic categories, e.g.,
`\.{unop}' and `\.{binop}' stand for unary respectively binary operators,
and `\.{op}' stands for operators like `$*$' that can be used either way;
`\.{exp}' stands for an expression, `\.{decl}' for one or more declarations,
`\.{stmt}' for one or more statements. Simple symbols like braces and commas
stand for themselves, as do many keywords; `\.{for}' stands for `\&{for}'
or~`\&{while}', and `\.{int}' for a type, storage class specifier or typedef
identifier. A complete list of category abbreviations can be found in the
source code for the function $\\{print\_cat}$ in~\.{CWEAVE}.
(To fully understand the parser's diagnostic messages one has to be familiar
 with the parsing algorithm and the grammar rules, but for error detection
 a detailed understanding is usually not required.)

At level~$0$ the parser will not produce any diagnostic output. At level~$1$
it will report any \Cee~fragment that could not be recognised as a single
syntactic entity, which is a good indicator of grammatical problems and
possibly of ugly output. It can be argued that level~1 is the natural level
to use (which is why the `\.{+d}' option is provided), since not getting any
diagnostics when there are syntax problems only gives a false impression
that things are in order; after all, nobody would want to use a compiler
that would spare the programmer its diagnostics for syntax errors, but
instead would produce unreliable code. In a syntactically correct \CWEB.
program it is almost always possible to apply \:f, \:;, \:[ and~\:] in such
a way that no diagnostic output is produced at level~$1$; indeed this is has
been done for all sources of \CWEBx. itself.

The diagnostic messages produced at level~1 print the successive categories
of the sequence of recognised items, which could not be combined into any
larger entity. Interpreting such a message takes a bit of practice, as one
has to guess which part of the program fragment corresponds to each category
printed; however, a look at the (badly) formatted output can often be
helpful. The boundaries between the entities corresponding to the printed
categories can often be recognised by the fact that some form of layout is
obviously missing, and a space appears instead; for instance, if a closing
brace of a compound statement is not preceded by a line break, then
something inside that statement must have prevented it from being recognised
by the parser, and its opening and closing brace will occur among the
printed categories.

At levels $2$~and~$3$ the parser will print the result of every single step
it takes; this extremely verbose mode can be used to trace the exact steps
by which the parser obtains its result. Detailed knowledge of the set of
grammar rules is assumed, and these levels are mostly useful to those who
wish to study or modify the rules. The set of rules can be found as a
chapter of the \CWEB. source document for \.{CWEAVE}, or can be obtained
separately by running `\hbox{\.{cweave -x rules}}' (ignoring the warning
about an unused module) and `\hbox{\.{tex rules}}'. After each reduction
step the number of the rule used is printed, followed by a list of
categories after reduction, with the one that was formed by the reduction
step enclosed in inverted angle brackets. Tracing at level~$3$ is even more
esoteric than at level~$2$: all categories printed will have an additional
character at both ends, indicating whether \TeX\ should be in math mode
(`\.+') or in horizontal mode (`\.-') at that end of the item, or that it
doesn't matter (`\.?'); this may help to explain the positioning of math
shifts (`\.\$') in the \TeX\ output, which is controlled indirectly by the
grammar rules.

To reduce the amount of output, all categories that have not yet been
considered by the parser are replaced by an ellipsis. The sequence of
categories before the reduction can be found by looking up the reduction
rule with the given number. Here is some sample output for a simple piece
of \Cee~code at level~$2$.
\vfil\penalty500\vfilneg\smallskip\vbox
{\narrower\obeylines\catcode`\_=12 \tentex \let\\=\BS \obeyspaces\let =\ %
Tracing after l.3:
@2 |if (n>0) printf("n-1 = \%d.\\n",n-1);|
  2: if ( >exp< ) ...
 10: if >exp< exp ...
110: >if_head< exp ( ...
  6: if_head exp ( >exp< op ...
  3: if_head exp ( >exp< ) ...
 10: if_head exp >exp< ;.
  7: if_head >exp< ;.
 80: if_head >stmt<.
117: >stmt<.
}
\smallskip
We see that the first three steps reduce `\&{if}~$(n<\T{0})$' to an
\.{if\_head}; then `$\.{"n-1\ =\ \%d.\\n"},n$' is combined to an expression,
after which `${}-1$' is incorporated as well; then the statement calling
\\{printf} is reduced in three steps, and finally it is combined with the
`\.{if\_head}' to form another statement.

Even this small example shows that \.{CWEAVE} parses the code in a
different way than a \Cee~compiler would. This is partly due to its strict
bottom-up strategy, which is largely unaware of context: parentheses
(rule~10) and a comma (rule~6) are incorporated by the expression syntax,
even when they actually figure in a conditional statement or function call.
Furthermore, some distinctions are irrelevant for determining the
proper layout: the ``comma operator'' is unjustly given precedence over the
minus operator, but the printed output will be no different for it.


\beginsection Some features of the standard format

The \TeX~file produced by \.{CWEAVE} will begin with loading the standard
format from the file \.{cwebxmac.tex}, whose definitions control the
typesetting process: \.{CWEAVE} communicates with \TeX\ mostly by using
macros defined there. Most of them have very short names, in order to limit
the size of the \TeX~file; one should be aware that most of the
single-letter control sequences and numerous two-letter ones are in use by
\.{CWEB}, and are not available for other uses (when in doubt, consult
\.{cwebxmac.tex}). All of the macros defined in plain \TeX\ for accenting
letters have retained their meaning however, except `\.{\\.}' (for the dot
accent), which is replaced by~`\.{\\:}'. Some of the macros of the standard
format can be of interest to the literate programmer, either because they
can be used directly in \TeX~text (indeed, some are not used by
\.{CWEAVE}, and are only intended for this purpose), or because they can be
redefined in limbo to alter the formatting of the program.

In formatted \Cee~text, many operators are represented by macros that
produce the appropriate symbols; by changing the definition of these macros,
one can alter their appearance. Here is a table of the relevant cases.
$$
\everycr{\noalign{\hrule}}
\def\:#1 #2
{\vrule\vbox{\halign
 {\strut\ \hfil##\hfil\ \cr \.{#1}\cr \.{\\#2}\cr $\csname#2\endcsname$\cr}
}}
\hbox
{\vrule\vbox
 {\hrule\hbox{ \strut\it operator }\hrule
        \hbox{ \strut\it macro    }\hrule
        \hbox{ \strut\it symbol   }\hrule
 }%
 \:= K \:== E \:!= I \:<= Z \:>= G
 \:\&\& W \:|| V \:! R
 \:\& AND \:| OR \:\^ XOR \:\~ CM \:<< LL \:>> GG
 \:++ PP \:-- MM \:\% MOD \:-> MG \:\#\# SS
 \vrule
}
$$
When such a macro is redefined, it is best to consult the original
definition first, since it often issues a penalty, and it is best to retain
this. Formatting of ordinary identifiers and keywords is performed by
`\.{\\\\}' and `\.{\\\&}', which have one argument, that is typeset in italic
respectively boldface type; similarly `\.{\\.}' is used for items in
typewriter type, such as strings and all-caps identifiers. In the argument of
`\.{\\.}' special characters can be used if escaped, as discussed for \:..
For `\AM' in ordinary text `\.{\\AM}' can be used (rather than `\.{\\\&}').
For names in all caps, like `\caps{ASCII}', or `\caps{UNIX}', the macro
`\.{\\caps}' is provided, which makes them slightly less obtrusive by
selecting a smaller font; for `\Cee' and `\Cpp' the macros `\.{\\Cee}' and
`\.{\\Cpp}' are provided.  Typesetting of comments, \Cpp\ one-line comments,
and numeric constants is controlled by the macros `\.{\\C}', `\.{\\SHC}',
and~`\.{\\T}', respectively; these can be redefined if a different style is
desired.

The dimensions of the pages can be controlled by setting the parameters
`\.{\\pagewidth}', `\.{\\pageheight}' (the height of the text area),
`\.{\\fullpageheight}' (the height including running head), and
`\.{\\pageshift}' (extra displacement of odd numbered pages with respect to
even numbered ones), and then invoking the macro `\.{\\setpage}'. A
magnification can be applied to the entire document by saying 
`\.{\\magnify\{$n$\}}',where $n$ is the magnification in thousandths of the
ordinary scale; this should precede any changes of the page dimensions,
but if no changes are made, the page dimensions will be set to their
standard values, unmagnified. The unit of indentation can be set by
`\.{\\indentation\{\<size>\}}'.

The title of the program is taken from the macro `\.{\\title}', whose
default value is the basename of the program source file, converted to upper
case. It is used in running heads and in the table of contents. Another part
of the running heads is set to the chapter title by sections starting
with~\:*, but by defining the macro `\.{\\gtitle}' in limbo the
corresponding text for the running heads on any pages before the first such
section can be set (the default is `\.{CWEB} output'). By invoking
`\.{\\titletrue}' the running head can be suppressed for one page; this is
useful if the text in limbo produces a title page.  The date of processing
(by \TeX) can be included in the document before the first section by
putting `\.{\\datethis}' in limbo; it can be placed on the table of contents
by saying `\.{\\datecontentspage}'. At the end of the document one normally
has an index, a list of module names and the table of contents, in that
order, but \TeX\ can be made to stop short of any one of these by invoking
respectively `\.{\\noinx}', `\.{\\nomods}', or `\.{\\nocon}'; as already
mentioned, stating `\.{\\changesonly}' will limit the printed output to the
sections affected by the change file. The appearance of the table of
contents can be controlled by redefining `\.{\\topofcontents}' and
`\.{\\botofcontents}': these macros determine the material that comes above
the table and below it, including its title and the glue needed to fill up
the page height. The page number of the table of contents is assigned from
`\.{\\contentspagenumber}' (the default is~0), but it will not appear in
print because the running head is suppressed on that page.

It may be noted that \CWEB. documents contain some fixed phrases in the
English language, such as the cross-references at the end of sections. These
are not produced directly by \.{CWEAVE} however: one could adapt \CWEB. to a
different language by redefining the macros `\.{\\A}', `\.{\\As}', `\.{\\Q}',
`\.{\\Qs}', `\.{\\U}', `\.{\\Us}', `\.{\\ET}', `\.{\\ETs}', `\.{\\ch}',
`\.{\\postATL}', `\.{\\ATP}', `\.{\\today}', `\.{\\now}', and parts of
`\.{\\fin}' and~`\.{\\con}'.


\beginsection Comparison with Levy/Knuth {\tentex CWEB}

As was mentioned in the introduction, \CWEBx. is derived from an earlier
\CWEB. system (itself derived from Knuth's \.{WEB}), that was written and
distributed by Sylvio Levy and Donald~E. Knuth, and that \CWEB.  system has
independently evolved into a version currently distributed as \CWEB.~3.3.
Both \CWEBx. and \LKC. have undergone changes with respect to their common
ancestor, although the spirit of the system has not fundamentally changed in
either case. Since we considered it undesirable to have a great divergence
between systems that both intend to be ``a \caps{WEB} system for~\Cee'', we
made a conscious effort to reduce the differences between \CWEBx. and \LKC.
by including the extensions of the latter into \CWEBx. as well. There was
one deliberate exception: we made no attempt to extend the grammar used by
\.{CWEAVE} to handle the full \Cpp~language
\unskip\footnote{${}^\dagger$}
{\Cpp\ has a significantly more complicated syntax than that of~\Cee, which
 is already far from simple, and it has some forms of context dependence
 that make it doubtful whether to \.{CWEAVE} could ever reliably handle
 \Cpp\ in full generality (and even then, \Cpp\ is a moving target). Most
 effort was spent on getting the grammar for \Cee\ correct; support for
 \Cpp\ was restricted to some extensions of~\Cee\ that could be incorporated
 easily.
}.
On the other hand, hoping to fully bridge the gap between \LKC. and \CWEBx.
for \Cee~programs, a compatibility mode was added to \CWEBx. in which it
tries to mimic the behaviour of \LKC. in all aspects that are relevant to
the programmer (even in cases where that behaviour is undocumented), at the
price of losing some possibilities that \CWEBx. normally has.

The description of the differences between \LKC. and \CWEBx. can be divided
into two parts: the differences between \LKC. and the compatibility mode
of~\CWEBx., and the differences between \CWEBx. with and without
compatibility mode. The former differences are minimal, but hard to
enumerate precisely, as they are mainly a matter of difference in
implementation. The latter differences are much more significant, but they
can easily be listed, since precise details of those differences can be
found by looking up all index references of the identifier
\\{compatibility\_mode} in the sources for the programs of~\CWEBx., and (for
the differences that only involve processing by \TeX) the contents of the
file \.{cwebcmac.tex} that modifies the \.{cwebxmac} format to emulate the
environment provided by the \.{cwebmac} format of \LKC..

As was stated, the differences between \LKC. and the compatibility mode
of~\CWEBx. should not be relevant to the programmer, but if one uses \LKC.
in a way that relies on knowledge of intimate details of its implementation
(which are not described in the manual but can be learned from studying the
sources), then it is certainly possible to find such differences; this
applies particularly to using the \TeX~code produced by \.{CWEAVE} in
unusual ways. Unfortunately there is no clear specification of which aspects
of \CWEB. are well defined so that the user can safely rely on them, and
which aspects are implementation details. We have taken a pragmatic attitude
by reproducing all aspects that are described in the manual, and moreover
many undocumented aspects, enough to process the sources of \LKC. itself and
of the Stanford GraphBase without problems. To give an impression of the
kind of differences that remain, we shall list some of the known ones.

The output files written by \CWEBx. are not equal to those written by \LKC.,
so processing them otherwise than directly by a \Cee~compiler respectively
by~\TeX\ may reveal some deviations. For instance, entries for the index and
the list of module names are written using the control sequence `\.{\\I}' by
\LKC., but since `\.{\\I}' is also used for representing the operator
`$\I$', this causes problems for module names in which that operator is
used; therefore, \CWEBx. uses `\.{\\@}' instead. In \CWEBx. unbalanced
braces or parentheses in program fragments or macro replacement texts are
reported and corrected by \.{CTANGLE}, as an aid in catching programming
errors early; in \LKC. this is not done (but programs with such unbalanced
symbols will still bring \.{CWEAVE} into serious problems). In compatibility
mode the definition of `\.{\\PB}' ensures that `\pb' can always be used from
within math mode; in \LKC. this is true only in simple cases. Comments in
the \TeX~parts of sections (following a non-escaped `\.{\%}' character) are
ignored and removed by \CWEBx., whereas in \LKC. they are processed normally
and copied to the output, which may cause spurious index entries, and in
exceptional cases may cause part of the comment to appear in print. The
grammars used by \.{CWEAVE} in the two systems are quite unrelated; for
\CWEBx., the only guideline in constructing the grammar has been the
\caps{ANSI/ISO~C} syntax. When processed by \CWEBx.  with the proper options
selected, \CWEB. documents will look similar to the result produced by
\LKC., but not identical. Unlike \LKC., \CWEBx. places optional breaks at
operators, reflecting their priority and nesting inside parentheses. In
\LKC., if \:{\ } is immediately followed by a subsectioning code, then the
output from the subsectioning code (e.g., \.{\#define} for~\:d) will be
placed on the same line as the section number, but if anything, even an
extra space, comes in between, or if the `\.@' in the sectioning code was
followed by a newline rather than by a space, then that output is moved to
the beginning of a fresh line; in \CWEBx. output from a subsectioning code
never appears on the same line as the section number.

\CWEBx. has a number of control codes and a number of command line options
that \LKC. does not have; moreover there are some control codes that \LKC.
does have, but under different names (that are used for other purposes
in~\CWEBx.). In compatibility mode such control codes have the same
interpretation as in \LKC., but if there is no such interpretation while
there is one in \CWEBx., the latter is taken;. This means that in
compatibility mode one can use the control codes \:v, \:\\, and \:\~, which
are ignored in \LKC., while \:?~and~\:) can be used as aliases for
\::~and~\:\#, respectively; furthermore the command line options controlled
by the characters `\.l', `\.d', `\.t', `\.e', `\.a', `\.u', `\.w', `\.m',
and~`\.+' are also extras with respect to \LKC.. Finally the control code \:;
retains all its \CWEBx. uses in compatibility mode, except that of modifying
the category of module names (which is different anyway), whereas in \LKC.
it can only be used as an invisible semicolon.

The most direct difference between \CWEBx. with and without compatibility
mode is that in compatibility mode the control codes \:h, \::, \:\#, and~\:p
are translated into respectively \:p, \:?, \:), and~\:c, which implies that
the meaning of \:h, \::, and~\:\# as described in this manual are not
available in compatibility mode. There is also an important syntactic
adjustment: in compatibility mode module names are always treated as
expressions (which means they must almost always followed by \:; to make the
combination behave as a statement, or by `\.;', which will however become an
empty statement in the \Cee~program). Then there are a few points where
compatibility mode lifts certain restrictions (thereby reducing the
diagnostic capabilities). All 8-bit characters will be accepted by
\.{CTANGLE}, whether or not an explicit translation was specified using \:l;
the default translation used corresponds to `\hbox{\.{@l \Cident{NN}
X}\\{NN}}', where \\{NN} is the 2-digit hexadecimal code, in upper case, for
the character. Module names used within `\pb' do not have to be the final
item. Rather than performing \:i inclusions before the change file is
matched, the order is more or less reversed (but if some \:i~line is not
replaced by the change file, then the included file will again be scanned
for changes); consequently \:i is allowed (and meaningful) in the change
file.

The remaining alterations affected by compatibility mode are fairly minor.
Trailing digits in identifiers will not be set as subscripts. The \TeX\
control sequence corresponding to identifiers that are given the category of
\\{\TeX} by means of a format definition will be processed in math mode
rather than horizontal mode. The code \:t together with the following
control text will not be treated as an expression in parsing, but as an
inert item that sticks to the token to the right of it (unlike comments that
are attached to the token to their left); this allows `\.{@/@t\\4@>}' to be
used in place of `\.{@\\}'. Compound assignment operators like `\.{+=}' are
treated as two separate tokens; this implies among other things that the
operator `\.{|=}' must be entered as `\.{@v=}' when used inside `\pb'. In
index entries produced by \:\^, \:., or~\::, the underscore character will
be automatically escaped by a backslash, unlike other special characters
(this makes it harder to enter formulas with subscripts into the index).
The output of `\pb' is made an argument to the control sequence `\.{\\PB}',
whose default definition puts its argument into an `\.{\\hbox}'; this makes
it safe to use `\pb' inside math mode when using compatibility mode.
Finally there are a few other small changes to the format used: \Cpp\
one-line comments will be formatted as if they were ordinary \Cee~comments,
and the formatting of lines in the table of contents will be affected in
font and spacing by the ``depth'' specified for that chapter title.


\beginsection Summary of\/ {\tentt CWEB} codes

For reference, we give a table with all the codes used in \CWEB. with their
main characteristics. The letters in the column {\it where\/} indicate in
which parts of the source text may immediately precede the code:
`L'~indicates text in limbo, `T'~the \TeX~part of a section, `M'~indicates
an intermediate part of a section (from \:d, \:h, ~\:f, or~\:s), `C'~the
\Cee~part of a section, and `c' pieces of \Cee~code within~`\pb' (the
letter~`M' is only used when the code terminates an intermediate part;
inside the parts after \:d, \:h, and~\:f, the letter `C' applies). The
column {\it frequency\/} indicates how commonly the code is used, with
$\\{regular} > \\{incidental} > \\{rare} > \\{emergency}$; for the codes with
$\\{frequency}\leq\\{rare}$, no sensible use could be found within any
source file for the \CWEB. system itself. The codes \:0--\:3 that are only
of temporary use are omitted from the table.

\vfil\eject
$$\vrule\vcenter{\hrule\smallskip\tabskip 1em
\let\par=\cr\obeylines \def\title #1
  {\noalign{\smallskip\hrule\smallskip\hbox{\sl\enspace#1}}}%
\halign{\strut\.{#\unskip}\hfil & #\unskip\hfil & #\unskip\hfil & %
        {\it#\unskip\/}\hfil & #\unskip\hfil
\omit\strut\it code & \it meaning & \it where & \it frequency & \it remarks
\title Sectioning codes
@*  & Start of chapter				& LTMC & regular %
    & \.{@**}, \.{@*$n$}, or \.{@*} Title\..
@~  & Start of section				& LTMC & regular
@\~ & Start of section tied to previous one	& LTMC & regular
\title Subsectioning codes
@c  & Start of unnamed program fragment		& TM & regular %
    & also \.{@C}
@<  & Start of module name			& TMCc & regular %
    & \.{@<} Module name \.{@>}
@d  & `\.{\#define}'; start macro definition	& TM & regular %
    & also \.{@D}
@h  & `\.{\#include}'; specify included header file & TM & regular %
    & also \.{@H}
@f  & Format definition; change syntactic category  & TM & incidental %
    & also \.{@F}
@(  & Start module name defining output file	& TMCc & incidental %
    & \.{@(} file name \.{@>}
\title Parsing control codes
@;  & Invisible semicolon, or magic wand for syntax & Cc & incidental
@[  & Start of item forced to expression	& Cc & incidental
@]  & End of item forced to expression		& Cc & incidental
\title Cross-referencing codes
@!  & Make index reference underlined		& TCc & rare
@\^ & Index entry in roman type			& TCc & regular %
    & \.{@\^}index entry\.{@>}
@.  & Index entry in typewriter type		& TCc & regular %
    & \.{@.}index entry\.{@>}
@?  & Index entry formatted by `\.{\\9}'	& TCc & rare %
    & \.{@?}index entry\.{@>}
@:  & Define label for explicit cross-reference	& TCc & incidental %
    & \.{@:}label\.{@>}
@\# & Explicit cross-reference to defined label	& T   & incidental %
    & \.{@\#}label\.{@>}
\title Layout control codes
@,  & Thin space				& Cc & rare
@|  & Optional line break			& Cc & rare
@/  & Forced line break				& Cc & incidental
@)  & Forced line break with vertical white space & Cc & incidental
@\\ & Forced line break, next line backed up	& Cc & incidental
@+  & Cancel any line break, replace by space	& Cc & incidental
\title \Cee\ control codes
@p  & Insert output from \:d and \:h		& Cc & rare %
    & also \.{@P}
@v  & Bitwise or operator `$|$'			& Cc & incidental %
    & also \.{@V}
@t  & \TeX~code within expression		& Cc & incidental %
    & \.{@t}\TeX~code\.{@>}; also \.{@T}
@\& & Glue together adjacent tokens		& Cc & emergency
@=  & Insert verbatim \Cee~code			& Cc & emergency %
    & \.{@=}verbatim \Cee~code\.{@>}
@'  & \ASCII. constant converted to number	& Cc & rare & \.{@'}$c$\.'
\title Silent control codes
@s  & Non-printing version of \:f		& LTM & rare
@q  & Ignored control text			& LTCc & rare %
    & \.{@q}any text\.{@>}; also \.{@Q}
@l  & Specify translation of 8-bit character    & L  & rare %
    & \.{@l} $xx$ string ; also \.{@L}
%\title Debugging level switches
%@0  & Debugging off				& TCc & temporary
%@1  & Report parsing failures			& TCc & temporary
%@2  & Trace every parsing step			& TCc & temporary %
%    & grammar maintenance
%@3  & Trace every parsing step, show mathnesses	& TCc & temporary %
%    & implementors only
\title Miscellaneous codes (these are not control codes)
@@  & Representation of `\.@'			& LTCc & incidental %
    & legal in control text too
@i  & Insert subsidiary source file		& any & incidental %
    & also \.{@I}
@x  & Start of change; old lines follow		& any & incidental %
    & also \.{@X}
@y  & Middle of change; replacement lines follow & any & incidental %
    & also \.{@Y}
@z  & End of change				& any & incidental %
    & also \.{@Z}
}\smallskip\hrule}\vrule
$$

\closeout\cont % the contents information has been fully gathered
\vfill\eject
\pageno=\contentspagenumber \secno=0 \titletrue
\message{Table of contents:}
\topglue 0pt plus 1.618 fil
\centerline{\ttitlefont CWEBx\titlefont\space Manual}
\vfil
\def\Z#1#2#3{\line{\kern.1\hsize\indent\llap{#1}\quad #2
  \leaders\hbox to .5em{.\hss}\hfil \enspace#3\kern.1\hsize}}
\def\z#1#2{\line{\kern.1667\hsize #1
  \leaders\hbox to .5em{.\hss}\hfil \enspace#2\kern.1\hsize}}
\readcontents
\vskip 0pt plus 2.618 fil
\eject

\bye

.
