REAL FUNCTION SNRM2 ( N, SX, INCX)
      INTEGER I, INCX, J, N, NEXT, NN
      REAL   SX(1),  CUTLO, CUTHI, HITEST, SUM, XMAX, ZERO, ONE
      DATA   ZERO, ONE /0.0E0, 1.0E0/
C
C     EUCLIDEAN NORM OF THE N-VECTOR STORED IN SX() WITH STORAGE
C     INCREMENT INCX .
C     IF    N .LE. 0 RETURN WITH RESULT = 0.
C     IF N .GE. 1 THEN INCX MUST BE .GE. 1
C
C           C.L.LAWSON, 1978 JAN 08
C
C     FOUR PHASE METHOD     USING TWO BUILT-IN CONSTANTS THAT ARE
C     HOPEFULLY APPLICABLE TO ALL MACHINES.
C         CUTLO = MAXIMUM OF  SQRT(U/EPS)  OVER ALL KNOWN MACHINES.
C         CUTHI = MINIMUM OF  SQRT(V)      OVER ALL KNOWN MACHINES.
C     WHERE
C         EPS = SMALLEST NO. SUCH THAT EPS + 1. .GT. 1.
C         U   = SMALLEST POSITIVE NO.   (UNDERFLOW LIMIT)
C         V   = LARGEST  NO.            (OVERFLOW  LIMIT)
C
C     BRIEF OUTLINE OF ALGORITHM..
C
C     PHASE 1    SCANS ZERO COMPONENTS.
C     MOVE TO PHASE 2 WHEN A COMPONENT IS NONZERO AND .LE. CUTLO
C     MOVE TO PHASE 3 WHEN A COMPONENT IS .GT. CUTLO
C     MOVE TO PHASE 4 WHEN A COMPONENT IS .GE. CUTHI/M
C     WHERE M = N FOR X() REAL AND M = 2*N FOR COMPLEX.
C
C     VALUES FOR CUTLO AND CUTHI..
C     FROM THE ENVIRONMENTAL PARAMETERS LISTED IN THE IMSL CONVERTER
C     DOCUMENT THE LIMITING VALUES ARE AS FOLLOWS..
C     CUTLO, S.P.   U/EPS = 2**(-102) FOR  HONEYWELL.  CLOSE SECONDS ARE
C                   UNIVAC AND DEC AT 2**(-103)
C                   THUS CUTLO = 2**(-51) = 4.44089E-16
C     CUTHI, S.P.   V = 2**127 FOR UNIVAC, HONEYWELL, AND DEC.
C                   THUS CUTHI = 2**(63.5) = 1.30438E19
C     CUTLO, D.P.   U/EPS = 2**(-67) FOR HONEYWELL AND DEC.
C                   THUS CUTLO = 2**(-33.5) = 8.23181D-11
C     CUTHI, D.P.   SAME AS S.P.  CUTHI = 1.30438D19
C     DATA CUTLO, CUTHI / 8.232D-11,  1.304D19 /
C     DATA CUTLO, CUTHI / 4.441E-16,  1.304E19 /
      DATA CUTLO, CUTHI / 4.441E-16,  1.304E19 /
C
      IF(N .GT. 0) GO TO 10
         SNRM2  = ZERO
         GO TO 300
C
   10 ASSIGN 30 TO NEXT
      SUM = ZERO
      NN = N * INCX
C                                                 BEGIN MAIN LOOP
      I = 1
   20    GO TO NEXT,(30, 50, 70, 110)
   30 IF( ABS(SX(I)) .GT. CUTLO) GO TO 85
      ASSIGN 50 TO NEXT
      XMAX = ZERO
C
C                        PHASE 1.  SUM IS ZERO
C
   50 IF( SX(I) .EQ. ZERO) GO TO 200
      IF( ABS(SX(I)) .GT. CUTLO) GO TO 85
C
C                                PREPARE FOR PHASE 2.
      ASSIGN 70 TO NEXT
      GO TO 105
C
C                                PREPARE FOR PHASE 4.
C
  100 I = J
      ASSIGN 110 TO NEXT
      SUM = (SUM / SX(I)) / SX(I)
  105 XMAX = ABS(SX(I))
      GO TO 115
C
C                   PHASE 2.  SUM IS SMALL.
C                             SCALE TO AVOID DESTRUCTIVE UNDERFLOW.
C
   70 IF( ABS(SX(I)) .GT. CUTLO ) GO TO 75
C
C                     COMMON CODE FOR PHASES 2 AND 4.
C                     IN PHASE 4 SUM IS LARGE.  SCALE TO AVOID OVERFLOW.
C
  110 IF( ABS(SX(I)) .LE. XMAX ) GO TO 115
         SUM = ONE + SUM * (XMAX / SX(I))**2
         XMAX = ABS(SX(I))
         GO TO 200
C
  115 SUM = SUM + (SX(I)/XMAX)**2
      GO TO 200
C
C
C                  PREPARE FOR PHASE 3.
C
   75 SUM = (SUM * XMAX) * XMAX
C
C
C     FOR REAL OR D.P. SET HITEST = CUTHI/N
C     FOR COMPLEX      SET HITEST = CUTHI/(2*N)
C
   85 HITEST = CUTHI/FLOAT( N )
C
C                   PHASE 3.  SUM IS MID-RANGE.  NO SCALING.
C
      DO 95 J =I,NN,INCX
      IF(ABS(SX(J)) .GE. HITEST) GO TO 100
   95    SUM = SUM + SX(J)**2
      SNRM2 = SQRT( SUM )
      GO TO 300
C
  200 CONTINUE
      I = I + INCX
      IF ( I .LE. NN ) GO TO 20
C
C              END OF MAIN LOOP.
C
C              COMPUTE SQUARE ROOT AND ADJUST FOR SCALING.
C
      SNRM2 = XMAX * SQRT(SUM)
  300 CONTINUE
      RETURN
      END

.